Used Bramidan Chamber Press - Baling Press for sale (14,299)

Condition: good (used), Year of construction: 2012, The pre-shredder (upper section) is not included in the offer. Only the lower part is offered. Rcedpfxsyrt T Ts Amgob Paper baler / baling press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Year of manufacture: 2012 Empty weight: 4,200 kg Max. operating pressure: 260 bar Protection class: IP55 Rated current: 30 A Rated voltage: 400 V, 50 Hz Rated output: 15 kW Electrical connection: 35 A gG Machine type: horizontal baling press for paper and cardboard

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, Rcjdoyplwfepfx Amgob We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Rjdpfx Amoyqw Sqjgjcb Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: ready for operation (used), Pressing force 60s tons Redpfx Amjra Nqhsgecb Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight approx. 2,430 kg Bale weight up to 500 kg Oil heating Motor 7.5 kW Brand new exhibition unit costs 11,000 EUR

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4 kW Connection voltage: 400/50 V/Hz Pressing force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Loading height from floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions W x D x H: 152 x 95 x 197 cm Weight: 850 kg Year of manufacture 2003-2005 costs 3000 EUR Year of manufacture 2006-2009 costs 3500 EUR Year of manufacture 2010-2013 costs 4500 EUR Year of manufacture 2016-2018 costs 5000 EUR Rsdpfx Aora Aghemgecb

Condition: used, Model: HSM V-press 1160 plus baler Rcsdpfx Amov Al Tiegob Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 386, pressing force: 50 t, filling opening width: 1,110 mm, filling opening length: 1,050 mm, bale width: 1,050 mm, bale height: 730 mm, bale weight: 425 kg, total width: 2,100 mm, total height: 3,100 mm, total length: 5,000 mm, overall weight: 6,800 kg, transport height: 2,400 mm, power: 22 kW (29.91 HP), The press was replaced by a larger one. It was used normally until dismantling. All functions were fully operational. The press is located at Chemnitzer Str. 96, 09212 Limbach-Oberfrohna. Rjdjypb Awopfx Amgjcb

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. SEE THE TECHNICAL DESCRIPTION BELOW Rsdpfx Aedfc Unjmgocb Bale Size: 600mm x 400mm x ... Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Capacity:

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 400mm x 400mm x... 2. Container Dimensions (Width x Length x Height): 1.000mm x 2.000mm x 800mm 3. Capacity: 4 tons/hour (Steel), 5 tons/hour (Copper), 2 tons/hour (Aluminium) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons Rjdpfodfc Iyox Amgscb 7. Main Compression Ram Thrust: 210 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 37 kW 10. Machine Dimensions (Width x Length x Height): 3.400 mm x 6.800 mm x 3.000 mm 11. Machine Weight: 18.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW Rodpfx Amegwa T Rogocb SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 300 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity* Rcsdpfx Asdfcqasmgjb

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. Rcedpjd Iya Nofx Amgob SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Rodpfx Amsymmmpsgocb Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, overall weight: 26,000 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), Good day, We hereby offer you, without obligation, a complete, used baler line comprising a BOA chain belt conveyor, type 1500 HS 29° KTH 3000 *13625 * 1500, a BOREMA PET bottle flattener type L 1600, and a BOA baler, type 2040, with wire tying stations and bale chute. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we accept no liability. Baler Manufacturer: BOA Type: 2040.S.4V (6) 71.30 Year of manufacture: 2002 Operating hours: approx. 66,568 (as of October 2025) Actual pump run time: 13,614 hours (as of October 2025) Number of bales pressed: 139,167 units (as of October 2025) Main press force: 71 t Rodsymldtepfx Amgscb Specific pressing pressure: 9.0 kg/cm² Feed hopper dimensions: 1,620 x 1,080 mm Bale dimensions: 1,100 x 720 mm, length adjustable from 800 to 1,600 mm Drive power: 45 kW Tying system: 4-fold vertical, fully automatic Machine weight (press): approx. 26 t Note: The machine was used at a recycling facility for compacting paper, cardboard, foils, and PET bottles. The press is in good condition and can still be inspected under power, but without material throughput. We would be pleased if this complete baler line is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: ready for operation (used), functionality: fully functional, pressing force: 38 t, MPC 20 PE compactor container Rsdpfx Asyiltqsmgscb

Year of construction: 1986, condition: refurbished (used), Chamber filter press, cpl. General overhaul in stainless steel lining, 82 filter plates in PP (food safe), 30 mm cake thickness, press capacity approx. 1100 litres, filter area 96 m2, fitted new filter cloths, max. 15 bar feed pressure possible, closed outlet via 2 diagonal corner holes, automatic plate transport and filter cloth washing system in stainless steel , high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with base for raising (stainless steel), control cabinet Rsdsn Dw Nkepfx Amgjcb

Condition: good (used), filter area: 21 m², pressure: 15 bar, cake thickness: 25 mm, System: Chamber filter press Rittershaus & Blecher Type: 0-22-080-2230-00 Design: Chamber filter press Filter plate format: 800x800/59 Cake thickness: 30 mm Year of construction: 1989 Number of plates: 24 pieces Filter cloths: optionally available in coordination with the medium Press capacity: approx. 310 dm3 / final capacity approx. 430 dm3 Rcjdpfx Amsqakdbegob Filter area: approx. 21 m2 / 29 m2 Filter pressure: approx. 15 bar Dimensions LxWxH 5480x2000x2660 mm Safety device: e.g. light barrier etc. optional by arrangement Purchase or rental: Inspections of the systems by arrangement at our factory. Miscellaneous: We can supply the system used and ready for operation or refurbished according to your wishes and requirements; would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: used, System: Chamber filter press, used Rcjdpjwqyfnjfx Amgob Type: Passavant Application area: sludge dewatering, gravel washing, tunnel construction Design: bridge rail Year of construction: 1995 Filter plate size: 1200x1200 Number of plates: approx. 94 plus head and end plate, final expansion +13 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 270 m2 Press volume: approx. 2480 dm3 Filter pressure: approx. 15 bar Pump technology: optional Washing system: No Miscellaneous: used Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, System: Used chamber filter press Type: Passavant Rodpfx Amewqyf Iegecb Application: Sludge dewatering Design: Bridge beam Year of manufacture: 1972 Filter plate size: 1200x1200 Number of plates: 59 plus head and end plate Filter plates: PP Filter cloths: optionally available, to be matched to the medium Filter area: approx. 270 m² Press volume: approx. 1700 dm³ Filter pressure: approx. 15 bar Pump technology: optional Purchase or rent: Inspection of the systems by arrangement at our facility.

Condition: used, System: Mobile chamber filter press, used Type: Netzsch Area of application: Sludge dewatering Commission No.: 040.087 Filter plate format: 1200x1200 Number of plates: approx. 95 Filter plates: PP Filter cloths: optionally available depending on the medium Filter area: approx. 230 m2 Press capacity: approx. 3400 dm3 Filter pressure: approx. 15 bar Year of construction: 1993 Rodpfx Aewf Uuajmgjcb Length: approx. 16 m Width: approx. 3.25 m Height: approx. 2.97 m Application: Sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspections of the systems are available by appointment at our factory.

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Figur-No.: 012.73/319.73/665.73/TH Commission No.: 040.417 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Rcedpfxowqydwo Amgjb Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Pump 1: SEEPEX Type BN 35-12 Commission number 266222 Pump 2 SEEPEX Type BN 10-24 Commission number 266223 Pump 3 SEEPEX Type BN 75-6LT Commission number 266224 Washing system No Conveyor technology yes Polymer system yes Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: excellent (used), Plant: Chamber filter press used type of construction: head guided filter plate format: 1500x1500 mm filter plates: 70 pieces / final extension 100 pieces Filter plates: PP Filter cloths: optionally available in accordance with the medium Throughput: 20-25 m3 per batch Filter area: 242 m² Press capacity: approx. 50 dm³ Filter pressure: 15 bar Closing pressure: 400 bar Plate transport: automatic Motor voltage: 380 V Control voltage: 230 V - 24 V Rcedpfx Aeg S I Smomgsb Filling pump: optional available

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Rcjdpfx Amsqa Dv Tjgjb Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: used, Plant: Chamber filter press used, on steel frame, semi-mobile Application: Sludge dewatering Design: R+B 1200/1200/125/30 head-guided Filter plate format: 1200x1200 Number of plates: approx. 125 Filter plates: PP Cake thickness: 30 mm Chamber volume: approx. 3.8 m3 Filter cloths: optionally available to suit the medium Filter pressure: approx. 15 bar Pump technology: optional on request Rodpjrk Ebkjfx Amgecb Power connection: 400 Volt / 125 A (CEE) Weight: approx. 65 tons plus filter cake Chamber volume: approx. 3.8 m³ Polymer post-dosing pump: e.g. max. 1.5 m³/h - optional on request Polymer hand attachment: optional on request - available e.g. consisting of 2 agitator tanks with agitator approx. 2m³ Sludge conditioning tank: optional - by arrangement e.g. volume approx. 1.8 cbm Purchase or hire: Inspection of the systems by arrangement at our factory. Miscellaneous: Would you like to rent or buy this plant? Please contact us, we will be happy to help you.

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Rjdpjrnnt Ijfx Amgecb Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.