Used Champagne Capsule Crimper for sale (121)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Kdsdpfeg Ailcex Afdsk Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: ready for operation (used), Year of construction: 2007, A fully automatic Dollberg counting and filling machine for tablets and capsules is available. Tablet diameter and output: 5mm: 2000 pieces/min, 9mm: 1800 pieces/min, 10mm: 1600 pieces/min, 12mm: 1400 pieces/min, 15mm: 1000 pieces/min. Capsule size and output: size 5: 1200 pieces/min, size 4: 1100 pieces/min, size 3: 1000 pieces/min, size 2: 900 pieces/min, size 1: 800 pieces/min, size 0: 600 pieces/min. Container feed: 60 containers/min, counter dimensions X/Y/Z: approx. 900mm/550mm/500mm. Documentation available. On-site inspection is possible. Kdsdpfxev Ubpqs Afdjk

Condition: used, Year of construction: 1997, Overview  This ZALKIN capsule feeder (type ECT) was produced in 1997 by the French manufacturer Zalkin. The machine was part of a bottling line with a capacity of 12,000 bottles per hour and was used to feed natural cork closures. The machine has been idle since production stopped in 2022 and is available immediately. Truck loading is included in the offer. Technical details  Output: 12,000 bottles per hour Application: Feeding of cork capsules, Ø 28 mm Bottle format: 750 ml cider bottles (glass) Kedpfx Afew Elvbjdsdk

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  Year of Manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bph (330 ml) Approx. 1,670 bph (500 ml) Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) Closure Type: 26 mm crown caps Configuration (Monobloc): 16 rinsing heads 16 filling heads 1 crowning head Scope of Delivery  Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts DE filter | Spadoni | - | 2011 | 80 hl/h Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules   Kdjdpfx Asyb Tkdjfdek

Condition: used, Year of construction: 2000, Overview  This Auxiemba Gacela RSA 9-III-IZ is a self-adhesive labeling machine manufactured in 2000. It was used for labeling cava (champagne) bottles with a capacity of 6,000 bottles per hour and can be adapted for wine bottles (8,000-10,000 bottles per hour). The machine has already been dismantled and stored. All technical documentation is available. Technical details  Capacity: 6,000 bottles per hour for cava 8,000-10,000 bottles per hour for wine Labeling stations: 3 heads (front, back, neck label) Possibility of retrofitting a fourth head Label infeed: 3 double roll unwinding stations with splicing function Electrical specifications: Voltage: 3 x 380V Frequency: 50 Hz Power: 20 KVA Ksdpfx Ajv Aafmsfdsdk

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Kodpfx Aewhk Dvefdodk

Condition: used, Year of construction: 2022, Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery  Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 rinser valves / 24 filler valves / 3×3 capping heads) | 2022 | Isobaric Automatic CIP System | WIN&TECH | — | 2022 | — Microfiltration Pallets (x2) | WIN&TECH | — | 2022 | — Wirehooder | ROBINO & GALANDRINO | REKORD 6 | 2022 | — Level & Cap Inspector | CMP | — | 2022 | — Capsule Distributor & Monoblock | ROBINO & GALANDRINO | ZENITH F 3/18 | 2022 | — Adhesive Labeller | MAKRO | 4 Stations | 2022 | — Bottle Conveyors | — | — | 2022 | Included Kodpfxeyb Tf Io Afdedk

Condition: used, Year of construction: 2014, Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS Kdodett Um Hjpfx Afdok

Condition: excellent (used), Easycount CD5 tablet counter Kdsdeiy Nngopfx Afdsk Serial: 51002040 Stainless, easycount will make a precise inventory of all hard and soft gelatin capsules and most sizes and shapes of tablets, fill all kinds of containers exactly and automatically, check number of full containers at any time and identify how many pieces have been counted in the last and incomplete containers, 1Ph

Condition: excellent (used), Manesty D3B tablet press Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph Kdodsiy Nn Ispfx Afdsk

Condition: good (used), Record Panda1000 flow wrapper Kedpfjnyilxjx Afdjdk Serial: 300376 flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph

Condition: new, All Items Boxed in original Packaging. Supplier Catalogue No 5555305P9-SS-A Kodpfxsxhdvcj Afdedk EXPIRY DATE 31st July 2026 All Items Unused and boxed in there original Packaging - 4 Pieces Sartorius Lab Instruments Sartopure GF+ MidiCaps (0.65 µm, BH9, 4 pcs) are high-quality filter capsules designed for microbial removal and particle filtration in laboratory and industrial applications. Here’s a breakdown of their key features and specifications

Condition: used, Electronic crimpers provide secure, reproducible crimps. A single press of the button both closes the crimping jaws to attach the seal and opens them to release the vial. Decappers provide quick and easy removal with a single press of the operation button. Adjustable crimp settings allow compatiblity with standard aluminimum, pressure-release, tin-plated steel and bimetal two-piece seals† Ergonomic design reduces wrist strain Controls and indicator lights are visible and accessible for left- or right-handed operation Crimpers and decappers can be operated while plugged in and recharging Vials can be crimped or decapped while they remain in most standard removable sample trays Crimp-force sensing automatically determines when a proper seal has been formed and opens the jaws to release the vial Kodpfx Aexzhy Sofdjdk

Condition: used, Containers for powder and capsules. Total volume: 500 litres Kedpfx Asx Rz Tgsfdedk Useful volume: 300 litres according to manufacturer's plate Quantity : 12 Polished stainless steel 316 Pyramidal bottom Total opening Lid Drainage trapdoor 150 x 150 Overall dimensions 750 x 750 x 1350

Condition: used, Year of construction: 2000, Single-head capping machine Zalkin TM125 La cadence maximale de cet équipement est d’environ 3000 flacons / heure L’introduction des bouteilles se fait par accumulation. Sens gauche -> droite Current format: Plastic capsule: diameter 60.5 mm x 4.5 mm Aluminium capsule: diameter 62 mm x 4.5 mm Possibility of changing the capping head. Roue 16 alvéole : diamètre primitif 530 mm / diamètre alvéole 56 mm - Distributeur de capsule (Bol vibrant + goulotte de distribution prise à la volée) type ADV N°6430 et 6428. - Table tournante : alimentation flacons Kedpfxox Rz Hte Afdedk Inlet belt: 2000 mm / width 110 mm Inlet belt on the machine: 1500 mm Outlet belt: 500 mm Crimping head 104 Tension : 380 Volts 50 hz coffret électrique coté sorti. 1 cellule de contrôle présence flacon capsule plastique 1 cellule de contrôle présence flacon capsule aluminium. 1 cellule détection d'accumulation 1 cellule détection de bourrage

Condition: good (used), CNC control, control panel, control desk, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit board, analog distribution card, distribution print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC Kjdpfen H Etfex Afdjdk -Power supply: Type E220 G5/15WRGD -Adapter capsule: Type 6ES5 491-0LB11 5 pieces -Interface modules: 6ES5 306-7LA11 -Subrack: 6ES5 700-2LA11 -Individual components: see photos -Price/Sale: complete -Dimensions total: 485/220/H305 mm -Weight: 12.3 kg

Condition: used, Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology Kdodpfjirax Rsx Afdek -Manufacturer: Wika, capsule spring pressure gauge, unused original packaging -Type: 0 to 4 bar -Screw connection: see photos -Number: 9x manometer available -Price per piece -Dimension: 110/85/H110 mm -Weight: 0.8 kg/pcs

Condition: excellent (used), Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology Kedpfxoggy S Tj Afdsdk -Manufacturer: Wika, capsule pressure gauge, unused OVP -Type: 612.20.100 0 mbar...250 mbar -Art. No.: 9071687 -Screw connection: G1/2 B bottom -Number: 2x pressure gauges available -Price: per piece -Carton dimensions: 140/110/H55 mm -Weight: 0.6 kg/piece

Condition: excellent (used), Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology Kdjdpfx Asggy Tfofdok -Manufacturer: Wika, capsule pressure gauge unused OVP Type: 612.20.100 0 mbar...60 mbar -Art. No.: 9071652 -Screw connection: G1/2 -Number: 2x pressure gauges available -Price: per piece -Dimensions box: 140/110/H55 mm -Weight: 0.6 kg/piece

Condition: good (used), Record Panda 1000 Flow Wrapper All contact parts are stainless steel 250mm wide double Jaw feature Adjustable infeed max width 210mm Distance between flights 330mm Adjustable temperature jaws and crimpers Infeed length 1500mm Kjdpfxen R Suwo Afdsdk Overall length 3500mm Variable speed 3 phase power In excellent condition

Year of construction: 2026, condition: new, The FleXlabeller is the fastest semi-automatic bottle labeller for factories, small producers and users of handcrafted products! Kodpfxsfkq Dmj Afdjdk With the FleXlabeller PE-ET, you can apply labels to almost all types of cylindrical products, such as various wine and champagne bottles, brandy and beer bottles, cans and pickles, at lightning speed! It is designed to handle almost any cylindrical product from 50 mm to 120 mm. Dimensions: Width: 38 cm Length: 65 cm Height: 65 cm Weight: 23 kg Operation: electric Capacity: 10-20 products/min Label features: Label winding: external (out) Minimum tape width: 20 mm Max. tape width: 165 mm Min. label length: 20 mm Max. label length: 200 mm Inside diameter of reel: 76 mm Max. outer diameter of label roll: 250 mm Cylindrical form reception: Yes Min. cylinder diameter: 50 mm Max. cylinder diameter: 120 mm Reception of square shapes: No Extension options: Manual label numbering Automatic label sorter Automatic label applicator Automatic label applicator Automatic label applicator Automatic label applicator Key features: Recommended for products with a bottle diameter of 50-120 mm The fastest semi-automatic labeller, motorised/sensorised operation Helps labelling of small to medium volume cylindrical products Enables positioned and accurate application of roll labels Extremely easy to use and set-up Optional manual or automatic label sorter.

Condition: excellent (used), Year of construction: 2017, SYNCROBLOC FOR LABELING AND BEER BOTTLING IN GLASS Model: CFT S 94 / A Year: 2017 Production Capacity: Up to 12,000 bottles/hour Container Types: • 0.33 L glass bottles (long neck and champagne type) • 0.75 L glass bottles (champagne type) Supported Caps: • Crown Ø26 mm on 0.33 L long neck bottles • Crown Ø29 mm on 0.33 L champagne-type bottles • Crown Ø29 mm on 0.75 L champagne-type bottles Labeling: • Self-adhesive front and back labels for 0.33 L long neck bottles • Wrap-around self-adhesive labels for 0.33 L and 0.75 L champagne-type bottles PE LABELER Maximum Output: • 12,000 bottles/hour without orientation • 11,000 bottles/hour with orientation Operations: • PLC + touch-screen panel for control • Automatic speed adjustment via inverter and sensors • Status indicator column light Kjdpownybqefx Afdjdk Main Components: • 4 self-adhesive labeling stations • Optical fiber system for bottle orientation • Photoelectric sensors for transparent labels • Label ionizer to eliminate static charges • No-Stop labeling system (label change without stopping production) Safety and Structure: • CE-compliant safety guards with protective doors • Plate rotation with servo motors and encoders • Electrical cabinet in AISI 304 stainless steel CFT MONOBLOCK COMPOSED OF: • Fixed nozzle rinser, single treatment, 30 grippers • Isobaric filler with 30 valves • Crown capper with 6 heads • Pitch between valves: 113 mm • Supported bottle diameters: 50 - 98 mm • Supported bottle heights: 125 - 365 mm • Production Capacity: 12,000 bph on glass bottles Filling Features: • Servo-controlled valves for electronic filling phase management • MasterTronic system for automatic regulation of filling phases (pre-evacuation, filling, decompression) • CIP/SIP system for sanitization with automatic dummy bottles Crown Capper • Suitable for Ø26 mm and Ø29 mm crown caps • Centrifugal cap feeder with cap presence sensor • Pick & Place device for cap transfer • Pressure heads with magnetic pickup AUTOMATIC QUALITY CONTROL INSPECTOR Checks Performed: • Minimum and maximum filling level (with foam compensation) • Cap presence via photoelectric sensor • Label presence with dedicated sensors • Automatic ejection of non-compliant bottles Software Features: • Real-time visualization of filling and production statistics • Storage for up to 60 bottle formats • MODBUS connection for remote data management INKJET CODER • Printing of codes on bottles and labels • Support for different types of ink CAP ELEVATOR

Condition: refurbished (used), Year of construction: 2000, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 5408, type of input current: AC, input voltage: 230 V, compressed air connection: 8 bar, input frequency: 50 Hz, Self-adhesive labeling machine with shrink capsule applicator Kdodpeq Huzlsfx Afdsk 2 label rolls for front and back label collecting table

Condition: new, Year of construction: 2025, Small and compact desktop counting machine for counting tablets/pills with regular or irregular shape, capsules and solid granules in the sense of tablets similar products such as candies. Also suitable for gel and gelatin capsules: After receiving samples, we can check and, if necessary, confirm the ability to run. Filling into bottles, cans, jars. The counter is equipped with dust resistance photoelectric detection technology and multi detection and alarm control functions. The 4 tracks vibration feeding device ensures evenly feeding and no breakage of product. The structure and design of the hopper prevents jamming of the products. Control via touch screen interface, menu in English available. - Specifications: Number of vibrating tracks: 4; capacity: max. 30 fillings/minute, depending on product, shape and quantity of the product; working range: adjustable from 2-9999 per container; error rate: = 0.2%; tablets/pills: min. Ø 5.5mm, max. Ø 35mm; capsules: 00-05#; compressed air: 6bar; power: 220V, 0.6kW; all the parts in contact with the product are made of Stainless Steel 316, other made of Stainless Steel 304; machine dimensions LxWxH: 610x1280x780mm; weight: 115kg. Kedpfev Nk H Uex Afdedk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic capsule filling machine for powder or pellets in capsules of size 000 - 5. Along with the main machine, various additional modules and machine enable a fully automatic filling process. Included: material hopper, capsule hopper, vacuum feeder, capsule feeder, industrial dust collector, capsule polisher, metal detector, collecting hopper (final product). – Specifications: suitable for capsule size: 000 - 5; segment bores: 25; max. speed of the machine in neutral: 140 cycles/minute (corresponding up to 3500 capsules/minute); main machine dimensions: L1555xW1165xH2040 mm; main machine weight: 2200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kdjdpjv Nlc Refx Afdok