Used Coherent Laserstrahlqã¼Lle for sale (8,073)

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2026, suspension: air, tire size: 385/65R22.5, color: other, Year of construction: 2010, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Further Information = General Information Ppodpfx Afey Tv Rfogot Color: Violet Axle Configuration Tire Size: 385/65R22.5 Axle Brand: DCA Brakes: Disc brakes Suspension: Air suspension Rear Axle 1: Aluminum rims; Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Rear Axle 2: Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Rear Axle 3: Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 7,760 kg Further Information Please contact Bob Beukers for further information.

Condition: used, Year of construction: 2002, Technical details: Ppsdsu Nzwuspfx Afgot rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: used, Year of construction: 2006, Technical details: table load: 2,2 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 2200kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad table height: 1700 mm Ppjdpju Nkx Iofx Afgst machine weight approx.: 12000 kg connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 00 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Ppsdpfx Aeu Idtpofget Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system Heidenhain for axes X/Y/Z/C-table hydraulics machine feet/footplates control panel with boom *

Year of construction: 1991, condition: used, Technical details: x-axis: 500 mm z-axis: 685 mm diameter: 300 mm air pressure - required: 5 bar tool table-turnable: 360° Tool table: Dm=745 mm tool diameter: ca. 290 mm total power requirement: 0,5 kW weight of the machine ca.: ca. 0,15 t space requirement of the machine approx.: 2,38x1,45x1,94 m Podpfou N An Iox Afgept Adjustment- and Measuring Device - measuring range z = 680mm - measuring range x = 500mm - pneumatical slide clamping - manual endless fine adjustment - turret rotating table - 220V/; 50/60Hz accessories: - taper 1x SK40 and 2 x SK 45 + chisel holder and adapter - brochure Sold as is. EDP not connected - hard disk and software missing *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Podpfx Afjv S Ay Sjgept Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *

Condition: used, Technical details: floor-plate length: 5500 mm Pjdpfx Ajval Nfjfgept plate width: 2150 mm plate height: 340 mm Plate thickness: 340 mm weight of the machine ca.: 9,0 t transport dimensions LxWxH: ca. 5,5 x 2,2 x 0,35 m Material cast steel Milled, finished surface T-slots according to DIN 650: a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm *

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts Ppjdpou Ibukofx Afget *

Condition: used, Year of construction: 1992, Technical details: plate width: 1550 mm plate thickness: 2,5 mm distance between columns: 1630 mm knife length: 1550 mm stroke adjustment: Oberwange: 90manuell / 70hydr. mm stroke adjustment: Unterwanne/Biegewanne: 105 manuell mm stroke adjustment: Biegewage: 40 mm bending angle max.: 93 (L-/Z-biegen) und 180° Zufalten ° back gauge: nein - no total power requirement: 4,5 kW weight of the machine ca.: 1,8 t dimension machine xH: 2,6 x 1,1 x 1,7 m dimensions of hydaulic: 1400 x 700 x 1480 mm This is a hydraulic swing bending machine bending capacity 2,5mm with approx. 400N/mm² strength Hydraulic OILTECH with approx. 200 liters * Ppedpfxju Ib Ano Afgot

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW Ppedpfxovdczae Afgjt weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min Pedpfx Aou Ix Dcefgopt tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" Ppedpfx Ajvvrpkofgot 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 Ppsdpfx Afovc Aytogst feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: HZ379, 1 Vetter US1.25-4.9 Column-swivel crane, NL 125 KG Load capacity at full extension: 125 KG / 0.125 tons Height: approx. 4.4 m, upper carriage boom: approx. 3.62 m Reach: approx. 4.9 m, hook height: approx. 3.2 m Base plate: 55 cm Total weight: approx. 400 kg Including 125 kg Demag DC chain hoist (2 lifting speeds) Connection to 400V 16A, swivel range: 360° Podoy Udp Eepfx Afgopt Crane is disassembled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost like new, see pictures Shipping via freight forwarder or collection by appointment

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: HZ667, Technical specifications: 1x Demag KBK 2 two-column slewing crane, model NL 500KG, with trolley drive Load capacity at full extension: 500KG Height: approx. 3.5m Upper flange length of the jib: approx. 3m Outreach: 3m Hook height: approx. 2.55m Total weight: approx. 600KG with baseplate approx. 100x100cm with 500Kg Demag DC chain hoist, year of manufacture 2013, and trolley drive including bolts, cable carrier, running gear, end cap, etc. Podpfx Aey Udkvofgspt Slewing range: 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please inquire See pictures Shipping via freight forwarder or collection only by appointment

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00. Podperivxcjfx Afgopt

Condition: used, TECHNICAL DETAILS - center height : 320 [mm] Ppjdpfxsyn R I Ts Afgst GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 3000 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] POWER SUPPLY - Supply voltage : 380 [V] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Heidenhain display - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 12000 [rpm]

Condition: used, Year of construction: 2007, x-travel 800 mm y-travel 650 mm z-travel 500 mm Control Heidenhain iTNC 560 Ppsdey T Scwopfx Afgst spindle tunring speed 12.000 U/min In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), functionality: fully functional, I am selling 1 to 6 complete sets here. Brand: Miller, Model: Proheat 35 – almost new. Ppsdeyr Idtspfx Afget Food warmer with induction heating element, 400–460 V, CE marking. New price for a complete set: 54,000 euros. Sale only to businesses (B2B) + VAT, or net price for export. Errors and omissions excepted.

Condition: used, maximum load weight: 13,770 kg, overall weight: 4,220 kg, axle configuration: 2 axles, first registration: 03/2004, loading space length: 7,000 mm, loading space width: 2,500 mm, * Schwarzmüller PA 2/E * Flatbed trailer * 2-axle * Disc brake system * VIN: VAVHAP2184H192498 * Tare weight: 4220 kg * Payload: 13770 kg * Gross vehicle weight: 17990 kg Ppjdjta I Sfspfx Afgjt * Wheelbase: 5115 mm * Body length: 7 m * Body width: 2.50 m * Vehicle length: 8950 mm * Vehicle width: 2550 mm * Vehicle height: 2750 mm * Tires: 385 / 65 R 22.5 * First registration: 22.03.2004 * Price (net) * All information without guarantee. Tel./WhatsApp:

Year of construction: 2004, condition: repair required (used), X-axis: 800 mm // 900 mm/min Y-axis: 600 mm // 900 mm/min Z-axis: 400 mm // 900 mm/min U/V: 60 mm Workpiece: X: 1300 mm Workpiece: Y: 910 mm Workpiece: Z: 400 mm Max. table load: 2,300 kg Main electronic connection: 400 V / 50 Hz / 3P Total power requirement: 10 KVA Air pressure: 6 bar Dielectric tank: 250 liters Technical attributes Z-motion: 400 mm X-motion: 800 mm Y-motion: 600 mm Weight approx.: 4,700 kg Approx. onsite dimensions (L x W x H): 1,950 x 2,550 x 2,000 mm. Manuals and documentation included. Not working; we suspect the power supply. Mechanical condition is very good. Podpfxsx Hxiko Afgopt

Condition: used, empty load weight: 10,000 kg, maximum load weight: 30,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 04/2020, loading space length: 11,400 mm, loading space width: 2,500 mm, loading space height: 1 mm, suspension: air, tire size: 235/75R17,5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, 4 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing points, hydraulic ramps, rear supports, twin tires, rotating beacon. Superstructure: hot-dip galvanized, loading height above rear axles 1,000 mm, loading height, low-bed 400 mm, excavator arm recess, excellent condition! Ppsdpfsy Ua Dlox Afgst New price approx. 100,000 EUR and a one-year delivery time! All information without guarantee, as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, color: black, driver cabin: other, gearing type: other, loading space volume: 14 m³, loading space length: 5,300 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, Vehicle location: Bovenden, chute, swinging flaps Superstructure: Meiller 3-way tipper body with aluminium side boards and chute, approx. 14 m³, spring flap support on the left, year of manufacture 2016! Pjdpfey Ua Ausx Afgspt Auxiliary frame width approx. 890 mm at the front and approx. 770 mm at the rear! Dismantled from a Daimler demonstration vehicle! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 1,600 mm, throat depth: 400 mm, operating speed: 50 mm/s, overall weight: 3,500 kg, total length: 2,350 mm, total width: 1,700 mm, total height: 2,220 mm, warranty duration: 24 months, Equipment: CE marking, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500 Ppodpfx Afjwzqx Hogst

Condition: used, functionality: fully functional, Year of construction: 2000, machine/vehicle number: 201381, load capacity: 10,000 kg, Kuli bridge crane / workshop crane, 10 tons – gauge 19,120 mm – year of manufacture 2000 For sale: a used Kuli bridge crane / workshop crane in good, immediately operational condition. The crane is ideal for production halls, workshops, steel construction, or industrial applications. Technical data Manufacturer: Kuli Type: Bridge crane / workshop crane Year of manufacture: 2000 Ppedpfx Aey Tlf Ssfget Load capacity / lifting capacity: 10,000 kg (10 t) Gauge: 19,120 mm Overall dimensions incl. head beam: approx. 19,360 mm Control: Floor control Overall height from top of crane to hook: approx. 1,600 mm Lifting height wire rope hoist: approx. 5,240 mm Condition The crane is in good used condition and was in operation until recently. Inspection while powered up is possible by arrangement. Dismantling / Availability The crane will be dismantled in calendar week 27. Until then, the system can be inspected on site. Location AQUAtec Master in Metal GmbH Note Loading and transport by arrangement. Errors and prior sale excepted.