Used Draka Comteq Uc2000 B_A 4G50/125 Frnc for sale (3,752)

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier Gkodpfx Afsy Ra Ddeuoc - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg

Condition: used, lifting height: 12,000 mm, Year of construction: 2019, operating hours: 2,107 h, load capacity: 3,499 kg, Equipment: air conditioning, cabin, JCB 535-125 Year of manufacture: 2019 Approx. 2,108 operating hours Air conditioning JCB Eco Max 4.4-liter engine Without DPF or exhaust aftertreatment 3 control circuits 3 steering modes – front-wheel steering, crab steering, all-wheel drive Lifting height: 12 m Load capacity: 3.5 tons Michelin tires, approx. 70% remaining Price: €39,900.00 net Available at an extra cost: Earth bucket: €1,490.00 net Light materials bucket, 2 m³: €2,100.00 net Gkodpfey Tz Dwex Afujc Light materials bucket, 2.7 m³: €2,150.00 net Light materials bucket with double cutting edge (reversible blade), 2 m³: €2,250.00 net Light materials bucket with double cutting edge (reversible blade), 2.7 m³: €2,450.00 net Small work platform for JCB or Manitou, Claas, Merlo, 1.2 m wide: €990.00 net Large work platform, 2 m wide: €1,550.00 net Inspection possible at any time, by prior telephone appointment. All information is subject to change without notice.

Condition: used, Year of construction: 2007, Charger Gksdsyvcnbspfx Afujc

Condition: excellent (used), Year of construction: 2010, overall weight: 10 kg, total length: 340 mm, total width: 125 mm, total height: 80 mm, Metal cutting Tooling NIKI AG - HD 125 Machine Vice 115 mm width MACH-ID 6435 Make: NIKI AG Type: HD 125 Year: 2010 Clamp width: 115mm Max. opening: 110mm Gjdpozc Iknjfx Afuskc Manuel or hydraulic: Manuel Number of matching vices:10 Length: 340mm Width: 125mm Height: 80mm Weight: 10kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 8830469, Starting resistor, series resistor, resistor -for testing large electric motors -Power: 125 A -with control cabinet -3x amps display 250 amps -(technical data see photos) -Dimensions: 720/800/H1000 mm -Weight: 128 kg Gsdpjb Uhvmsfx Afuskc

Condition: used, Transport rollers, wheels, rollers, support rollers -comes from a grandstand system -Rollers diameter: 125 mm -Number: 108 sets of rolls available -Price: per piece Gkedpfx Ascd Emvefuec -Dimensions: 505/135/H50 mm -Own weight: 2 kg

Condition: used, Gear motor, electric motor Gkodeckbg Depfx Afuec -Speed: 125 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 30 mm -Protection class: IP 54 -Weight: 27 kg

Condition: used, machine/vehicle number: 0112240552743, Year of construction: 1980, weight max. in kg:1250 kg stroke:4180 mm fork length:1100 mm total power requirement:ca. 5,7 kW weight of the machine ca.:1,12 t Gjdpoc Nztvefx Afuskc dimensions of the machine ca.:2,0 x 0,85 x 1,85 (BxTxH) m

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA59220-0125 -Stroke: 125 mm -Piston diameter: 40 mm -Piston rod: 16 mm Gedjfbhz Nepfx Afuskc -Price: per piece -Number: 3 pieces -Dimensions: 290/55/H55 mm -Weight: 1.25 kg

Condition: new, Schunk SRU+50-W / 362622 universal swivel unit + 2 x PZN 125-1 / 300313 universal gripper, unused, 100% functional, scope of delivery as shown in the photos. Gedpei Ec Nnjfx Afuekc

Condition: repair required (used), Year of construction: 2006, Manufacturer: BT Tip: SPE 125 L Load capacity: 1250 kg Gksdpfjm Twafjx Afusc Fork length: 1600 mm Year of manufacture: 2006 Without charger Battery must be replaced/repaired!!!

Condition: ready for operation (used), Year of construction: 2004, Centrifugal pump, pump, KSB Etanorm mx 125-250 NA, Used machine Overall dimensions :1690 x 780 x 1000 mm Gkjdouhl R Hopfx Afujc Weight: 1000 kg Manufacturer:KSB Type:Etanorm mx 125-250 NA Year of manufacture: 2004 Electrical data: 400 V; 50 HZ; 2980 rpm; 110 kw; 190 A Lifting height: 75,5 m Pump capacity: 5920 L/min

Condition: used, Electric motor, three-phase motor -Power: 0.125 kW -Speed: 1100 rpm -Shaft diameter: 14 mm Godpfx Aeghnftefuokc -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 235/190/H160 mm -Weight: 10 kg

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest Gedewrxqxepfx Afujkc dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: ready for operation (used), Year of construction: 1995, Krauss-Maffei KM 125-620 C1 Clamping force 125 tons Year 1995 Screw diameter 50 mm Injection volume 377 cm³ 343 g Tie-bar distance 47x47 cm Gkodpfxswyx Rue Afujc

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Gksdexuq R Hepfx Afuec Operating hours: approx. 63,000 h The machine can be inspected at any time

Condition: good (used), Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 130 x 30 mm Gedoxrz Auopfx Afuokc -Clamping depth: 125 mm -Dimensions: 405/130/H105 mm -Weight: 18.7 kg

Condition: ready for operation (used), functionality: fully functional, Lagun FU 125 universal milling machine, with dimension display, 1250mm x 280mm table, 45-degree table inclination, all axes with automatic travel: longitudinal 850mm, transverse 290mm, vertical 450mm, with Huron ISO 40 head, variable speeds 28-1800 rpm, variable feeds 12-800mm, 5 hp, in good condition. Godpjzbz Epofx Afuskc

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0443848, center height: 625 mm, center width: 8,000 mm, spindle speed (max.): 355 rpm, bed width: 800 mm, TECHNICAL DETAILS Swing diameter over bed: 1,250 mm Swing diameter over slide: 1,100 mm Center height: 625 mm Distance between centers: 8,000 mm Bed width: 800 mm Spindle bore: 1,100 mm Spindle speed range: 1.8 - 355 rpm MACHINE DETAILS Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 10,730 x 1,600 x 2,400 mm Unladen weight: 12,000 kg Transport packages: 3 EQUIPMENT Fixed steady rest Four-jaw chuck Three-jaw chuck Gjdpjy Hit Hofx Afuekc

Condition: new, driver cabin: other, gearing type: other, Year of construction: 2026, Equipment: crane, Vehicle location: Bovenden Type: ICM CLA-L 125 two-shell grapple with hydraulic rotator, available 18 times Capacity: 125 liters Width: 450 mm Opening width: 1200 mm Gjdpfjzgxndjx Afuskc Filling capacity: 250 kg Available 18 times – NEW from stock! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, spindle diameter 125 mm spindle travel 1130 mm column travel 6000 mm Gkjdpfx Afoyuqc Roujc headstock travel cross 1700 mm column travel on cross-slide 400 mm spindle speeds 2,24 - 450 (27x) U/min volt 380 V total power requirement 14 kW Facing head D.R.O.

Condition: used, spindle diameter 125 mm spindle travel 1000 mm column movement horizontal 7000 mm headstock - vertical 2500 mm/min Gsdpfx Ajyuql Esfuekc cross travel column 450 mm taper ISO ISO 50 P.D.B. total power requirement 25 kW

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125x125 mm capacity 90 degrees: flat 130x125 mm 80 mm 80x80 mm 80x80 mm capacity 60 degrees: round 80 mm capacity 60 degrees: square 50x50 mm capacity 60 degrees: flat 80x80 mm sawband speed 30-80 m/min. dimensions of saw-band 1440x13x0,65 mm 190 mm output 230 V weight of the machine ca. 19 kg Domestic equipments: - Stepless speed regulation - Saw arm can be swiveled up to 60 ° right - Tape guides with 8 ball bearings - with stop Gkedpfjyv N Ezox Afusc

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 9 pieces -Prism width: 100 mm -Dimensions: 9x 240/125/H63 mm Gkodpfx Asu T Tqrsfuec -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 240/250/H190 mm -Total weight: 83.1 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 125 mm -Drum: Ø 200 mm Gkjdpfx Aovxg Akofuec -Hole: Ø 70 x 75 mm -Bolt circle: Ø 90 mm M8 -Quantity: 1x drum available -Dimensions: Ø 200 x 125 mm -Weight: 7.8 kg