Used Eccentric Press 65 Tons for sale (25,239)

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min Iedpeu N A U Iofx Ag Astn daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: good (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 660 mm, table length: 530 mm, total length: 15,850 mm, total width: 12,450 mm, total height: 23,700 mm, overall weight: 4,500 kg, ram adjustment: 80 mm, stroke adjustment: 95 mm, LEN 40C Eccentric Press. Year of manufacture: 1981 (SMERAL TRNAVA Czech Republic). Iedpfjtzwt Uox Ag Aotn Technical data: - pressing force: 40 tons - number of strokes in the machine: 70/142 min - number of strokes manual operation: 50 min - slider stroke adjustment: 8-95 mm - slider stroke: 80 mm - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - extension: 265 mm - engine power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. It is possible to inspect and check the machine in motion.

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min Itjdpez N Hu Nefx Ag Ajn shut height (stroke down, adjustm. up) 260 mm ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 4,000 t, stroke length: 180 mm, throat depth: 500 mm, overall weight: 28,000 kg, controller model: Siemens S7-300, The machine underwent a major overhaul in 2007! The following modifications were carried out on the single-column eccentric press PEE 400: Itsdpfjzmfnqex Ag Ajn Conversion of the press drive to an adjustable drive with 15-45 strokes of the press ram Conversion of the clutch and brake to a pneumatically actuated Ortlinghaus clutch-brake combination Adjustment of the pinion shaft, flywheel, and bearing cover to the pneumatically actuated clutch-brake combinations Replacement of the rolling bearings for the pinion shaft and flywheel bearing Replacement of all sealing elements and wear parts for the drive Replacement of the seals for the compensator cylinder Replacement of the V-belts for the flywheel drive Replacement of the entire electrical control system Installation of a stroke adjustment mechanism Modification of the safety device Mounting of a tie rod to reduce frame deflection under press force Replacement of the worm gear for ram adjustment, pressure spindle, spindle nut, and pressure ring Refurbishment of the ram guide rails Replacement of the die plate and its support Hydraulics Pneumatics Lubrication Hydraulic pull-down cushion in the press table Tool mounting arms for attaching the press tool Tool lever strips in the table TECHNICAL DETAILS Pressing force: 4,000 kN Adjustable stroke: 30–180 mm Adjustable stroke rate per minute (continuous operation): 15–45 /min Ram adjustment: 150 mm Overhang: 500 mm Ram area (width × depth): 1,200 × 800 mm Table area (width × depth): 1,600 × 1,000 mm Maximum distance between table and ram area: 625 mm MACHINE DETAILS Control: Siemens S7-300 Motor power: 55 kW Motor speed: 1,500 rpm Hydraulic pull-down cushion Piston diameter: 110 mm Piston rod diameter: 90 mm Effective piston area: 95 cm² Pull-down cushion diameter: 230 mm Adjustable counterforce: 10–250 kN Usable pull-down cushion stroke: 90 mm Speed of the pull-down cushion during extension: max. 65 mm/s Hydraulic system Flow rate of the pull-down cushion pump: 29 l/min Drive power of the main pump: 7.5 kW Oil capacity in the tank: 250 l Flow rate of the circulation pump: 65 l/min Drive power of the circulation pump: 1.5 kW Operating pressure for clutch and brake: 5 bar Operating pressure for ram weight compensation: 5 bar Total machine weight: 28,000 kg

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min Iedpfx Ajxuv Htog Aetn total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , Isdpjzq Sp Aefx Ag Aotn . new UVV-tested .

Condition: used, total length: 2,650 mm, total width: 1,600 mm, total height: 3,350 mm, Colour: Green Empty weight: 9.000 kg - Documentation available: Yes - Drive system: CNC - Press force [ton]: 70 - Min. stroke [mm]: 10 - Max. stroke [mm]: 90 - Table length [mm]: 650 Iodpfx Aexry Szeg Aotn - Table width [mm]: 495 - Ram width [mm]: 400 - Transport dimensions: 2650mm x 1600mm x 3350mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 200 h, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 365 mm, operating speed: 54 mm/s, Equipment: CE marking, documentation/manual, safety light barrier, The machine is almost unused. Includes a Coil Tech unwinding system. 4. Technical Specifications Maximum pressing force t 60 Table-to-ram distance mm 365 Ram stroke mm 4 - 102 Number of strokes per minute 54 Die opening diameter mm 40 Table overhang (from the center of the ram) mm 245 Ram adjustment mm 95 Ram surface dimensions mm 425 x 250 Table dimensions mm 750 x 500 Table opening dimensions mm 170 Supporting table with T-slot strength mm 70 Distance between frame side walls in the working area mm 430 Distance between anchor bolts (depth) mm 900 Distance between anchor bolts (width) mm 695 Machine dimensions: height mm 2270 depth mm 1850 width mm 1100 Weight kg 3640 Motor power kW 7.5 Motor speed rpm 1450 Direct sale to end-users only. Itedezw Rpzopfx Ag Ajn W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, Year of construction: 1987, Kapasite : 300 ton Iedpfx Agozxra Re Aetn Hava Tüketimi: 30 m³/saat Güç: 38 kW Kapladığı Alan: 13,20 m² Üst Tabla Ebatları : 1800 x 900 mm Alt Tabla Ebatları : 1300 x 1200 mm Pres Yükseklik : 4.000 mm Pres En : 2.200 mm Pres Genişlik: 1500 mm Dakikadaki Vuruş Sayısı : 40 spm used

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm Iedpfx Agsy Nd Sve Astn table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Itjderm Nqmopfx Ag Aon Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Year of construction: 1974, condition: used, Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement. Isdpfxez S Iupe Ag Aetn

Condition: good (used), Year of construction: 1966, Machine number: 6665/66 Type / Model: PEDV 10/II-S Pressing force: 10 t Table: 450 x 300 mm Ram: 190 x 140 mm Ram stroke: 6 to 50 mm Downward ram adjustment: 45 mm Upward table adjustment: 140 mm Die opening: 140 mm Overhang: 170 mm Itedpoh Tktisfx Ag Asn Maximum distance between table and ram: 320 mm Stroke rate: 160 /min Sheet metal thickness per stroke: 2 mm Sheet metal thickness for continuous stroke: 1 mm Connection: 1.2 kW Accessories/Equipment: Condition: good Weight: 1.0 t Dimensions: 900 x 850 x 2,200 mm

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm Itedszwg Umjpfx Ag Ajn ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m

Condition: ready for operation (used), Year of construction: 1962, Eccentric press with black shield, Iodpfxeu Rrrfe Ag Astn Pressure capacity 15 t, Stroke adjustment from 5 - 60 mm, Table dimensions: 550 x 360 Dimensions: W 800 x D 1200 x H 2200 mm Weight 800 kg,

Condition: used, Year of construction: 1984, Press force 1,500 kN Adjustable stroke 20 - 120 mm Itjdpfx Asyg Ebxeg Asn Ram adjustment max. 85 mm Stroke rate 50 / 75 1/min. Machine weight approx. 8,000 kg Further data and images available on request

Condition: good (used), functionality: fully functional, Offered is a knee lever press/foot press including a set of calibration tools. The machine was used in the manufacture of wedding rings. The calibration tools have European ring sizes from 82-39. The press and the tools are used, but in fairly good condition. The press weighs approx. 150 kg. Itodpovy Dutjfx Ag Ajn

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm Iodpju Nfizofx Ag Astn height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Stroke rate 70 1/min. Itjdperm Ntpjfx Ag Asn Further data and pictures on request the press is currently not functional and must be mechanically and electrically overhauled

Condition: excellent (used), Year of construction: 1998, Rijva EP 180 Strokes per minute: 50 Motor: 8.8 kW Isdpfoz Ngvysx Ag Aotn Weight: approx. 12,000 kg

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min Iodpfxjvt Nvpe Ag Aetn strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. Ijdpfxsu N A Uus Ag Aotn *

Condition: used, Year of construction: 1980, Pressing force 1,100 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Strokes per minute 35 / 70 1/min Machine weight approx. 5,100 kg Further data and images available on request Itjdpfx Agjyg Ecpo Aon

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm Iedpju Nfh Dsfx Ag Astn This press is currently for sale without controls. Optional on customer request completion possible. i.D. *

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm Iodpfxjzrpn Ss Ag Aotn ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation