Used Elsterwerda Magnetic Plate for sale (14,339)

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Ijdpfoyuzcusx Amgjih Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used roller, 1 meter wide Iiedpfozi Sa Sjx Amgjh Type: MRB 1001 E Capacity: 1050 x 1 mm (steel) Electric drive, left and right Year of manufacture: 2011

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear Iiedpfx Amsy I Dbbjgjh - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm Iiedpfx Aeyh D Nnomgjh roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine approx.LxWxH: 5,3 x 2,4 x 2,0 m For cone bending, approximately 70% of the maximum plate thickness applicable to standard round rolling can be processed. For truncated cone rolling, a maximum plate thickness of approx. 8 mm can be processed. *

Condition: excellent (used), Marking plate-clamping plate-surface plate Length 1560 mm Width 560 mm Thickness 60 mm Weight 180 kg The plate is heavily tipped on the bottom. Iijdpfewaxl Ejx Amgsh Surface is finely planed. T-slot 16 mm

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. Iiodpswqr R Aofx Amgoh The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate Iedpfx Amjy S Rnisgjih -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

Condition: used, Technical details: Iisdpfxju Nkrnj Amgeh length: 640 mm width: 465 mm thickness of clamping plate: 90 mm weight of the machine approx.: 70 kg

Condition: used, Technical details: floor-plate length: 3000 mm plate width: 1775 mm plate height: 350 mm Isdpfx Aju N Dglsmgjih Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longitudinal side and on the front side. *

Condition: used, Technical details: floor-plate length: 1345 mm plate width: 845 mm plate height: 28 mm weight of the machine ca.: ca. 260 kg transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used Iodpfju N Dg Sex Amgoih - with diverse mounting holes M12 - with diverse (9x) clearance holes Ø 13mm *

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1000 mm Iijdpfx Aou N Dmlsmgjh plate height: 1700 mm material thickness: 150 mm weight of the machine ca.: 2300 kg Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands securely on the floor. The plate can be moved via two wheels each. *

Condition: used, Year of construction: 1979, Technical details: Iiodju N Dqdspfx Amgeh floor-plate length: 6400 mm plate width: 1870 mm plate height: 415 mm weight of the machine ca.: 8600 kg transport dimensions LxWxH: 6,4 x 1,9 x 0,42 m Very high quality (no damage) Steel Plate - T-groove DIN 650 - a=36; h=69; b=59; c=25mm; Groove distance= 315mm - included: 26 cover plates Ø 147 x 3mm *

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Iiedpeu N D Dwefx Amgeh Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m Iiodpfx Aou N D Rdemgjh There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: used, Technical details: floor-plate length: 5600 mm plate width: 1890 mm plate height: 1. 335 2, 390 3, 370 mm weight of the machine ca.: 9,0 pro Platte t transport dimensions LxWxH: 5,6 x 1,89 x 335 (390) (370) m 3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Iodpfxju Rl Ugo Amgeih Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distance 315mm Through-hole Number 23 Size D=130 i.D. *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet * Isdsu Rni Hepfx Amgjih

Condition: good (used), Clamping plate with grooves, marking plate, measuring plate, measuring table, straightening plate, marking plate Iiodsndzycopfx Amgeh -Clamping surface: 2995 x 2500 mm -Clamping plate: with grooves, no T-slots -Height: 300 mm -Groove width: 10 mm -Groove spacing: 200 mm -Transport dimensions: 3100/2500/H300 mm -Weight: 5000 kg

Condition: excellent (used), Faceplate Diameter 450 mm Height 110 mm Jaw height 55 mm Large diameter of long taper bore: 100.5 mm Small diameter of long taper bore: 85 mm Iodpefhvkvsfx Amgeih Taper length: 73 mm External thread for locking nut: Thread 130 x 4 Keyway: 16 mm

Condition: excellent (used), Splash plate Diameter: 500 mm Weight: 68 kg Iiodpfx Amsfm Tqrogoh Bolt circle diameter: 134 mm Center bore diameter: 96 mm

Condition: excellent (used), Splash guard Diameter 390 mm Wheel offset 6 Bolt circle diameter 135 mm Weight 56 kg Iiedpfsfm Tqzex Amgsh

Condition: good (used), Splash guard Diameter 405 mm Height 100 mm Bolt circle diameter 84 mm Iisdpfx Asfm Trujmgsh Weight 55 kg

Condition: excellent (used), Floor plates 6000x2000x400mm, with T-slots. Iisdpef H Hgfofx Amgoh 8 pieces available. Weight: 11.5 tons/piece.

Condition: excellent (used), Clamping plate made of cast iron Length 2000 mm Width 315 mm Isdod Tcz Sopfx Amgeih Height 90 mm T-slot width 32 mm T-slot spacing 150 mm Diameter of the 12/8 fixing holes 27 mm Solid material

Condition: excellent (used), Face plate and clamping disk (2858) Diameter 440 mm Camlock mounting 133.4 Cone diameter 106.39 Iiedotup Trjpfx Amgoh Height of face plate 50 mm Weight 28 kg

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm Iiedpju Icdyofx Amgsh *