Used Fag Fag 6218Ma.c3 for sale (118)

Condition: new, empty load weight: 6,900 kg, maximum load weight: 28,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 11,000 mm, loading space width: 2,420 mm, loading space height: 2,000 mm, loading space volume: 53 m³, total length: 2,550 mm, total width: 3,900 mm, suspension: air, tire size: 385 / 65 R 22,5, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Vehicle location: in feed / in transit, aluminum body, 3-axle, SAF axles, grain outlet, portal doors Body: Body approx. 53.2m³, ARCHIVE PHOTO! Drum brakes, The vehicle is still under construction and will be completed! Location: Hoym ( FAG ) ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hedpfx Aovhg Hbehzjnp - .

Condition: new, empty load weight: 6,400 kg, maximum load weight: 28,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,440 mm, loading space height: 2,000 mm, loading space volume: 51 m³, total length: 2,500 mm, total width: 3,650 mm, suspension: air, tire size: 385/65R22,5, color: grey, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3-axle, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), roller tarpaulin, catwalk, grain outlet, supports Body: Aluminum box body manufacturer Fudickar approx. 51.8m³ low pressure cylinder 190Bar, floor 7mm, side walls 30mm hollow chamber profile with 2.7mm inner wall thickness, front wall straight 4mm, rear wall as combination door (1/3, 2/3) with double bearing and steel frame incl. grain slider 400x400mm, replaceable rubber seal, saddle height 1,180-1,210mm, construction of the trailer like Langendorf! New vehicle from stock with daily registration on 08.06.2022! ACCESSORIES WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! Hnsdpfx Ahsvhhvqozep - .

Condition: new, empty load weight: 3,100 kg, maximum load weight: 10,900 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,630 mm, loading space height: 813 mm, suspension: air, tire size: 285/70R19.5, color: silver, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, 2 axles, BPW axles, tandem, air suspension, raising and lowering function, ABS (anti-lock braking system), lashing points, front supports, rear supports, adjustable drawbar height. Hodoi Rrvvspfx Ahzsnp Body: designed for roll-off containers, drum brakes, hot-dip galvanized, load securing, BPW axle type KMBMH 7008!, 10.9 tons payload, pre-installation for attachable ramps for construction equipment transport. On our pre-running trailers, the loading area can be extended upon request and for an additional charge! German production! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, color: silver, driver cabin: other, gearing type: other, loading space volume: 53 m³, loading space length: 11,000 mm, loading space width: 2,420 mm, loading space height: 2,000 mm, Vehicle location: in feed / in transit, Body: Aluminum tipper body approx. 53m³ Location: Hoym ( FAG ) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hnsdpfxjvi Ihps Ahzop - .

Condition: new, Trailers tank or aggregate construction 750 - 1500 - 2000 - 2700 kg Hnedpozbmfzsfx Ahzep Condition: New

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Hsdsy I S Rwspfx Ahzenp

Condition: excellent (used), Year of construction: 2016, Type BAFAG ATU 25 Power 2 kW Material conveyor Labotek Power 1.1 kW Hsdpfx Aouvg Dxshzjnp

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Dryer: Manufacturer: Ryser GmbH Switzerland Type: BAFAG ATU 35 Power: 3 kW Year of manufacture: 2015 Material conveying device: Manufacturer: Labotek Hodpfeu Rcz Dsx Ahzenp Type: PGT 4-I/MV/MR/P1 Model: 101501 Year of manufacture: 2016 Power: 0.4 kW

Year of construction: 2015, condition: good (used), functionality: fully functional, Manufacturer Ryser GmbH Switzerland Type BAFAG ATU 15 Power 2 kW Hodpfxsvz Svbs Ahzsnp

Condition: reconditioned (used), Year of construction: 2007, Teach-in lathe 230x1000; reconditioned machine with general inspection and overhaul, replacement of seals and Z-axis bearings bar capacity 58 mm CNC FAGOR 8055 Hodpfx Ahsv Nquljzonp year of manufacture 2007 complete with: self-centering chuck chip conveyor manual turret with CAPTO C4 interface set of tool holders set of jaws manuals and CE certificate

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: PR721523001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC-460, spindle speed (max.): 15,000 rpm, The new price of the machine was approximately €140,000 in 2023! No tools or a vise are included. However, these can be purchased separately upon request. TECHNICAL DETAILS Travel range X-axis: 1,300 mm Travel range Y-axis: 650 mm Travel range Z-axis: 600 mm Spindle speed: 15,000 rpm Main spindle servo motor Siemens: 20/53 kW Main spindle servo motor Fanuc: 15/30 kW Spindle taper: SK 40 Work table Table dimensions: 1,500 × 650 mm Table load: max. 1,200 kg T-slots: 18 × 5 × 100 mm Distance spindle to table surface: 150–750 mm Distance spindle center to Z-axis cover: 697 mm Rapid traverse X/Y axis: 36 m/min Rapid traverse Z axis: 36 m/min Working feed rate: max. 1–12,000 mm/min Feed motors X/Y/Z: 3.2/3.2/4.3 kW Torques of the feed motors X/Y/Z: 20/20/27 Nm Tool positions: 28 Tool length: max. 300 mm Tool diameter: max. 75 mm Tool diameter with free auxiliary positions: max. 125 mm Tool weight: max. 8 kg Tool change time: 1.6 s MACHINE DETAILS Control system: Heidenhain TNC-460 Accuracy without linear glass scales Positioning accuracy over the entire travel range: 0.012 mm Repeatability accuracy over the entire travel range: 0.008 mm Accuracy with linear glass scales Positioning accuracy over the entire travel range: 0.008 mm Repeatability accuracy over the entire travel range: 0.006 mm Cooling and power supply Coolant tank volume: 250 l Coolant flow rate: 40 l/min Mains voltage: 400 V ± 10 % Number of phases: 3 Mains frequency: 50 Hz Connected power: 85 kVA Dimensions and weight Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm Weight: 8,000 kg EQUIPMENT Direct drive Double-arm tool changer O-BLUM tool measuring system Lasercontrol NT O-BLUM workpiece measuring system TC50 Electronic handwheel (MPG) Thread drilling without compensation chuck USB interface CF card interface Ethernet interface HIWIN linear guides with roller guides in all axes HIWIN ball screws Hjdpfjzlh S Ajx Ahzonp Directly driven main spindle NSK/FAG main spindle bearings Separate oil-air spindle cooling unit Fully enclosed tool changer for protection against chips Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop Fully enclosed splash guard Separate air conditioning system for heat dissipation from the control cabinet Siemens electrical components Automatic, path- or time-controlled central lubrication system Kyarow telescopic covers in all axes Coolant system with adjustable nozzles as a coolant ring around the spindle Chip flushing system in the interior for optimal chip collection Spiral chip conveyor working in the Y-direction for removing chips from the machining area Rear chain chip conveyor

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a high-quality CNC carousel turning, drilling, and milling center from the German manufacturer Konrad Seidler from Neuss – Holzheim, model: MINIMAX 1800, manufactured in 2013. The machine comes from its first owner and was used in a single-shift operation in our own production facility. After the commissioning of a new manufacturing solution, the machine was decommissioned, extensively overhauled, and has only been used to a limited extent since then. The machine is in fully functional, operational, and regularly maintained condition. An inspection and a test run under power can be arranged at any time. It is particularly worth mentioning the extensive general overhaul of the drilling/milling spindle in 2025, which brought a major wear component of the machine back to as-new condition. Highlights: • Turning, drilling, and milling center in one machine • Year of manufacture: 2013 • Siemens 840D SL CNC control • SINAMICS 120 drive technology • Tool changer with 16 positions • HSK100 tool holder • Faceplate load: 6,000 kg • Faceplate speed: 5–500 rpm • Milling spindle up to 6,000 rpm • High-pressure coolant system: 30 bar • Chip conveyor • Walk-in work area • First owner • Extensive documentation available Hnjdozhlbmjpfx Ahzsp • Available for immediate delivery General Overhaul 2025 In 2025, the installed Capellini high-performance spindle (HSK100, 6,000 rpm) was completely overhauled by a specialist company (Deuschle). Excerpt of the work performed: • Measurement of all components on a measuring machine • Renewal of precision bearings (FAG / SKF / GMN / NSK) • Renewal of the HSK100 clamping system • Replacement of Balluff sensors • Refurbishment of the spindle shaft using laser welding and grinding • Renewal of all wear parts • Fine balancing according to ISO 1940 • System balancing of the complete spindle assembly • Adjustment of the bearing intermediate rings • Final acceptance including test report Technical Data Control: Siemens 840D SL Drives: SINAMICS 120 Turning diameter: 500–1,270 mm Faceplate load: 6,000 kg Faceplate speed: 5–500 rpm Drilling/milling spindle: 30 kW Torque: 190 Nm Drilling/milling spindle speed: 2–2,500 rpm (max. 6,000 rpm) Tool holder: HSK100 Tool changer: 16 tools Coolant system: 6 bar / 30 bar high pressure Chip conveyor: Cross conveyor, discharging to the left Discharge height: 1,200 mm Machine weight: approx. 22,000 kg Enclosure: Double sliding door, walk-in work area Documentation available: • Operating manuals • Installation documents • Electrical diagrams (partly) • Documentation of machine components • Documents for the control system • Documents for the chip conveyor • Other original documents from commissioning Sale ex works, excluding loading. The buyer organizes the truck crane and the transport. If you have any questions or need more information, please send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. Hnsdpfx Ahjbatamszsp 1500 Roundinho rotary tables in use worldwide.

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Hodpfozgbu Hox Ahzjnp FAG Schaeffler Deep groove ball bearing DIN 625-61864-M

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Hnedpfx Ahjzlth Nszep Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-2060 • Type: Vibrating Screen • Size: 2000 x 6000 mm • Deck size: 2-3-4 • Motor: 22 kW Bearings: Heavy duty SKF-FAG • Capacity: 180-220 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 315 kW (428.28 HP), fuel type: electric, color: other, overall weight: 25,300 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Hjdpfx Aezlta Eshzonp PDK Series Primary impact crusher is a rotor type crusher and an expert in crushing less abrasive materials with medium hardness with very high reduction and cubical ratio. Primary impact crushers can be preferred for crushing large sized stones and it lowers secondary crushing requirement in entire systems. PDK series impact crushers deliver unbeatable performances in primary, secondary and tertiary applications. The crusher consists of two parts, body opening and adjustment systems operate easily with the hydraulic power unit thus provides an advantage for easy maintenance and minimum stopping for a constantly work. We produce PDK crushers as Mobile Primary Impact Crusher and Stationary Primary Impact Crusher. General Specifitions and Futures: • High capacity • High reduction ratio • Wear surfaces are protected by solid-filler electrode welding • Hammers and crushing plates are manufactured from high manganese steel casting • Inner surfaces of the crusher is coated with wear resistant lining plates • Wide intake with chain curtain due to protection from back-leaping • Hydraulic setting system TECHNICAL SPECIFICATIONS • Model: FABO PDK-150 • Type: Primary Impact Crusher • Rotor Size: 1200 x 1500 mm • Max Feeding: 800 mm • Capacity: 300-600 TPH • Motor Power: Heavy duty GAMAK,315 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 25300 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), fuel type: electric, color: other, overall weight: 14,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. Hedpfx Aszlr R Aehzjnp These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, color: other, overall weight: 12,400 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE DMK series are secondary impact crushers that leading to the crush of medium and high hardness materials, which are used after jaw crushers or primer impact crushers. DMK crushers are also designed to reduce wear costs while increasing capacity and cubic production. It reduces medium and high hardness materials such as limestone, dolomite, granite and basalt into the desired size of asphalt and concrete aggregate. The ease of maintenance and adjustment is one of the major advantages of this type of crusher. Hydraulic body opening system, adjustment of crushing plates from the outside, easy pallet and lining replacement ensure that these types of crushers can be used easily on site conditions. GENERAL SPECIFICATIONS AND FUTURES: -High capacity -High reduction ratio -Wear surfaces are protected by solid filler electrode welding -Hammers and crushing plates are manufactured from high manganese steel casting -Inner surfaces of the crusher is coated with wear resistant lining plates -Easy maintenance thanks to hydraulic adjustment system TECHNICAL SPECIFICATIONS • Model: FABO DMK-01 • Type: Secondary Impact Crusher • Capacity: 130-200 tph Hsdpfx Ahjzibf Rjzenp • Size: 1120 x 1000 mm • Max Feeding: 450mm • Motor: Heavy duty GAMAK, 160 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 12400 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), fuel type: electric, color: other, overall weight: 10,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI machines are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduce their service requirements and times, and to increase their crushing performance with their low investment costs. General Specifitions and Futures: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-700 • Type: Vertical Shaft Impact Crusher Closed rotor Hnodpfx Ahozhi S Nozop • Capacity: 100-150 tph • Max Feeding: 30 mm • Rotor Size: Ø 700 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 200 kW Bearings: Heavy duty SKF-FAG • Weight: 10000 kg • Dimensions: 4000 * 3000 * 2450 mm • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, overall weight: 2,800 kg, rotor diameter: 350 mm, number of blades: 42, total length: 1,460 mm, total height: 1,800 mm, total width: 1,950 mm, rotor length: 620 mm, rotor width: 350 mm, power: 35 kW (47.59 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Hedpsyyun Aefx Ahzjnp Why Mizar SSH? • Precise output size control via interchangeable screens • Stable and intelligent hydraulic feeding system • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), fuel type: electric, color: other, overall weight: 15,900 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE PDK Series Primary impact crusher is a rotor type crusher and an expert in crushing less abrasive materials with medium hardness with very high reduction and cubical ratio. Primary impact crushers can be preferred for crushing large sized stones and it lowers secondary crushing requirement in entire systems. PDK series impact crushers deliver unbeatable performances in primary, secondary and tertiary applications. The crusher consists of two parts, body opening and adjustment systems operate easily with the hydraulic power unit thus provides an advantage for easy maintenance and minimum stopping for a constantly work. We produce PDK crushers as Mobile Primary Impact Crusher and Stationary Primary Impact Crusher. General Specifitions and Futures: • High capacity • High reduction ratio • Wear surfaces are protected by solid-filler electrode welding • Hammers and crushing plates are manufactured from high manganese steel casting • Inner surfaces of the crusher is coated with wear resistant lining plates • Wide intake with chain curtain due to protection from back-leaping Hnsdpszhbbcofx Ahzep •Hydraulic setting system TECHNICAL SPECIFICATIONS • Model: FABO PDK-100 • Type: Primary Impact Crusher • Rotor Size: 1200 x 1000 mm • Max Feeding: 600 mm • Capacity: 150-200 TPH • Motor Power: Heavy duty GAMAK,200 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 15900 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, color: other, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates Hjdpfx Ahszha Hqszenp TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), fuel type: electric, color: other, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 150 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. Hedpfxjzhaxmo Ahzsnp *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, WORKING RANGE TURNING - swing diameter (max) 470 mm - turning diameter (max) 235 mm - worpiece length max. 1000 mm Hodpfx Asfcqtcohzjnp BED GAP / BRIDGE - swing in gap 690 mm MAIN SPINDLE - spindle bore diameter 58 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 58 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r TAILSTOCK - taper: MK 4 ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - space requirements -left/right- 1900 mm - space requirements -front/back- 810 mm - total height 1220 mm - total weight approx. 1800 kg << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Hnedpsyz An Tofx Ahzep