Used Feed-Through Veneer Press for sale (25,803)

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Lredpfsdzqltjx Akyok Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Year of construction: 1989, pressing area: 2500mm x 1100mm Lodpfxjyl Tins Akyork opening: 400mm heating: elektrisch plate surface: ALU - Gold eloxiert Emergency stop switch: yes pressure: 65t number of cylinder: 4 electricity: 22A machine length: 3500 mm machine width: 1300mm weight: 3000kg

Condition: excellent (used), Shelf length: 250 cm Width: 130 cm Four actuators Ledpfxexgnp De Akyerk

Condition: new, Year of construction: 2025, Plate dimensions 3000x1350 mm Daylight opening 400 mm Number of daylights 1 St. Heating 31,5 kW Specific pressure 2,5-5,0 kg/cm² Total pressure 90 t Motor output 1,5 kW Dimensions (L/W/H) 3480x1500x2000 mm weight of the machine ca. 5000 kg Lrjdoyk H Stspfx Akyjk

Condition: ready for operation (used), Veneer press with 30 floors Size of press plates 3000 x 1650 mm Hydraulically operated. Hot water for heating Lsdpjyh A E Ujfx Akyerk In-feed system and out-feed system included

Condition: used, Year of construction: 1990, power: 22 kW (29.91 HP), pressing force: 135 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 5,000 kg, empty load weight: 5,000 kg, working width: 1,350 mm, operating pressure: 340 bar, cylinder diameter: 90 mm, opening width: 400 mm, plate width: 1,350 mm, pressure: 340 bar, space requirement height: 2,100 mm, space requirement length: 3,150 mm, space requirement width: 1,500 mm, transport length: 3,150 mm, transport width: 1,500 mm, transport height: 2,100 mm, No. 04516 Veneer press Ott ST 2513/135 Used, year of construction 1990 Aluminium heating plates with protective foil 2550 x 1350 mm LW Total pressure 135 tons Specific pressure 4.4 - 6.0 kg/cm2 6 hydraulic cylinders with diameter 90 mm Maximum operating pressure 340 bar Heating plates electrically heated 2x emergency stop safety line all around Lredpfx Akoykt H Rjyek Opening width 400 mm, infinitely adjustable 4 heavy longitudinal beams in the press table ensure enormous stability Pull-out material support on the left front side Button control for close - open - stop Total electrical connection approx. 22 kW Transport dimensions approx. 3150 x 1500 x 2100 mm LWH Weight approx. 5000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, OTT 300K100 Shelf Press Shelf length: 255 cm Width: 135 cm Clearance between shelves: 350 mm Shelves are in nice gold color but have a single dent of approximately 3 cm diameter Electric heating Piston diameter: 100 mm, 4 pistons Weight approximately 3.2 t Machine in stock, inspection possible Ledpsyh H Uyefx Akyork

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Lsdpfx Asi El Ucokyerk

Condition: good (used), Year of construction: 2007, GRIGGIO Model TYP NPC/A 30/19 AF-BO, S/N B3720207. Through-feed press for bonding natural veneer, laminate, etc. Working width: 1830 mm. Max length: 3010 mm. Price includes Osama S4 R/P-2000 glue rollers. Lsdpfx Akoyk Dnfjyork

Condition: ready for operation (used), electrically heated Press dimensions 2,200 x 1,100 mm Lrjdpfxsygg Ime Akyok 4 press cylinders, diameter 80 mm Temperature of upper and lower plate separately adjustable

Condition: refurbished (used), functionality: fully functional, Refurbished four-cylinder hydraulic flat press of Italian manufacture. Branded multi-layer press for easy wood veneering. Veneering plate dimensions: 2500 x 1300 mm Plate opening: 400 mm Pressure over full surface: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic cylinders: 4 MYLAR Teflon foil on the plates Prepared for water heating of the plates Option to install a hot water boiler Lsdsyi U Rnjpfx Akysrk Price: EUR 7,200 ex VAT The overhaul status and readiness of the machine for collection must be checked in advance! In stock in Telnice near Brno, Czech Republic Testing, machine demonstration, and operator training are included as standard.

Condition: excellent (used), Shelf press for veneering Cooper 3000×1300, water-heated Lrsdpfsyi Sfcox Akyjk

Condition: good (used), Year of construction: 2000, type of input current: three-phase, pressing force: 500 t, total length: 4,000 mm, total width: 4,000 mm, total height: 3,200 mm, overall weight: 43,000 kg, temperature: 160 °C, continuous press with mylar belt dimensions: 2700 x 3200 mm Lrjdeycxvujpfx Akyjk

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Product size max. 2500 x 1200mm Oil heating. Total power 21,7 KW at maximum. Very good condition. Available immediately. Ledpfx Akou E E A Tjysrk

Year of construction: 2000, condition: ready for operation (used), Columbus C S Contura Lrodpfx Aevg Inkskyjk Permanently elastic press cushion for every veneer press 2200 x 1000 mm

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1000042683, feed length Y-axis: 1,300 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 63 A, total width: 1,950 mm, total length: 1,950 mm, total height: 3,100 mm, The Brema Vektor 15 is a CNC machining center with a vertical column, designed for processing wood-based panels. The machine can perform drilling, milling, and engraving using a pantograph. It allows for machining on all 4 edges of the panel and profiling thanks to its patented panel transportation system. The machine is equipped with: - A head with independent vertical spindles: 21 (7 on X + 14 on Y) - Horizontal spindles (2L + 2R on X) - Main vertical spindle (milling unit) 7.5kW - Automatic revolver-type tool change system, 10 positions Available revolver units: 1. Saw on X 2. Saw on Y 3. Drilling on Y (1R + 1L) 4. Hinge drilling (1x35mm + 2x5mm) 5. Milling 6. Milling 7. Milling Lrodpfx Akjx Hfh Tsyok

Condition: used, pressing force: 65 t, table width: 1,100 mm, table length: 2,200 mm, total length: 2,600 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 2,800 kg, empty load weight: 2,800 kg, cylinder diameter: 80 mm, opening width: 300 mm, plate width: 1,100 mm, space requirement height: 2,000 mm, space requirement length: 2,600 mm, space requirement width: 1,300 mm, transport length: 2,600 mm, transport width: 1,300 mm, transport height: 2,000 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Lrodpeyfw D Aofx Akysk Terms of delivery: ex warehouse

Condition: used, used Manufacturer Joos Machine no. 790 1 level Plate size approx. 2200 mm x 1100 mm Opening width approx. 280 mm Aluminum plates Piston diameter 80 mm Space requirement approx. 2800 mm x 1300 mm x 1850 mm Weight approx. 3000 kg Total connected load 13.2 kW heating power Lrjdpfx Aowrtlqjkyjk Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without guarantee and warranty

Condition: used, with new Mylar film used, in good condition Brand: Joos Ljdpjww Nd Hsfx Akyork Year of manufacture: 1981 Machine no.: 81/10621 1 level GS certified Plate size approx. 2550 mm x 1350 mm Opening width approx. 400 mm Tip control Swivel control panel Lower safety bar Side guide Electric heating Max. pressing force 90 t Aluminium plates Piston diameter 80 mm Required space approx. 3000 mm x 1600 mm x 2100 mm Weight approx. 3000 kg Total connected heating load 20 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: excellent (used), Shelf press for veneering Manni 2500×1300 Ledpfx Akjyhnvnoyjrk Shelf length: 2500 mm Shelf width: 1300 mm Press with 4 cylinders Shelves heated with water from the central heating system

Condition: like new (used), - Shelf length: 3000mm - Shelf width: 1300mm Ljdevwi Rbspfx Akyork - Clearance: 340mm - Number of pistons: 6 - Piston diameter: 80mm - Oil heating - Hydraulic side pressure - Emergency stop – pull cord

Condition: like new (used), shelf length: 3500 mm shelf width: 1300 mm shelves made of stainless steel Lrodpoyfr T Eefx Akyjk pistons and seals replaced number of pistons: 10 piston diameter: 85 mm water heating weight: 6100 kg

Condition: excellent (used), Year of construction: 1988, operating hours: 9,807 h, functionality: fully functional, machine/vehicle number: 17483, NOTTMEYER KOMET SUPER S/PN - very well maintained - fully functional - available immediately Lsdpfx Akex Af D Royjrk

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Ljdpfx Aedx R Tfskyork Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: Ledpoxgbxfofx Akyork - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -