Used Feldmuehle Grinding Wheel for sale (22,032)

Condition: used, Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone Kdodsqva I Ajpfx Ai Rer -Receptacle: Perforated shaft cone Ø 62-69 mm / left weight. -Grinding disc: Ø 376 x 30 mm -Total weight: 28 kg

Condition: good (used), Grinding wheel puller, cup wheel puller, double bench grinder puller, surface grinder puller, cylindrical grinder puller, dressing head, dressing head for grinding machines Quantity: 1 piece available -Dimensions: 325/130/H135 mm Kjdpfx Aiod R Ikde Rsdr -Weight: 7.3 kg

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min Ksdpfjyv Iqvex Ai Rodr 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 30-39 mm -Type designation: not available Kdedpowvp A Tsfx Ai Rjr -Dimensions total Ø 180 x 75 mm -Weight: 5.9 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 50-60 mm Kdedpowvp Dksfx Ai Rjr -Type designation: not available -Dimensions total Ø 180 x 90 mm -Weight: 8 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Kdjdpswvqagjfx Ai Ror -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 230 x 85 mm -Weight: 10.3 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-59 mm -Type name: 508x10-100x127 / 508x10-80x127 Kodpfx Aiowux Szo Redr -Dimensions total Ø 190 x 100 mm -Weight: 7.7 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm Kdsdpfx Aiewvp Nme Rer -Mounting: Hole shaft cone Ø 49-64 mm -Type designation: not available -Dimensions total Ø 210 x 125 mm -Weight: 10.9 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 163 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 220 x 85 mm -Weight: 8 kg Kodpfx Aiewvp R De Rjdr

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 32-35 mm -Grinding wheel: Ø 210 x 40 mm Ksdjw Dpfqjpfx Ai Rodr -Transport dimensions: Ø 210 x 70 mm -Total weight: 4.3 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Kedpfewn Di Sex Ai Redr -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 Number: 5x mounting flange available -Price: per piece -Dimensions total Ø 180 x 100 mm Weight: 7.1 kg/piece

Condition: ready for operation (used), functionality: fully functional, DESCRIPTION OF MACHINE Kodpfowxrnwex Ai Rjdr INCLUDED A LOT BELTS A Löser abrasive belt grinding machine offers the most flexible grinding / linishing on the market today. The combination of basic machine plus a variety of contact arms and attachments offers dozens of possible applications for many different purposes. There are over 20 standard attachments available for this machine allowing it to be used for centerless grinding, internal polishing, grinding of hollow bodies and small radius and turbine blade finishing to name but a few. Fields of application of these abrasive belt grinding machines include: *Foundries *Medical engineering *Aircraft industry *Vehicle construction *Mechanical engineering *Specifications Abrasive belt grinding machine, type KS 350 *Grinding belt length 3000-4000 mm *Grinding belt width 5 - 75 mm Loser KS 350 Belt design features:: *Drive motor 4 kW (standard design) with fitted variable speed inverter drive *Drive wheels of 100 - 280 mm diameters = 3 - 46 mtr./sec. belt speed *Mechanical belt tensioning *In case of a belt break the drive is immediately disconnected. Therefore, the risk of an accident is eliminated. *Contact disks of 50 - 400 mm diameters, with a wide choice of grinding attachments for any kind of surface finishing * DC injection breaking unit fitted. *Maintenance-free, dust-proof contact disk bearing with permanent lubrication, contact disk change in less than 1 minute. *LÖSER abrasive belt grinding machines open up new fields of application for belt linishers that in the past could not be processed with normal belt grinders. *When using 3 to 4 m long grinding belts, the 3-contact wheel system ensures the constant and optimal belt speed no matter which contact disk diameter is being used. *Driven by the motor pully, the three pully system allows the belt which is constantly tensioned a higher degree of torque at the same motor rating. *When working with Scoth-Brite disks or belts or with felt polishing belts, the drive can be infinitely adjusted even for speeds as low as 3 mtr. /sec. Due to the advantages offered by the 3-contact point system, any required surface finishing is possible using contact disks from 50 to 400 mm, contact rolls or contact rollers from 15 to 50 mm, contact belts of 6 or 30 mm width, polishing brushes, polishing disks and polishing belts.

Condition: used, Year of construction: 1975, functionality: fully functional, total height: 2,000 mm, total width: 1,200 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 3,800 kg, workpiece diameter (max.): 60 mm, input voltage: 400 V, LIDKÖPING 2C – Centerless cylindrical grinding machine (for through-feed and plunge-cut grinding), manufactured in 1975. Manufactured in 1975 · For through-feed and plunge-cut grinding · 14 grinding wheels and 4 regulating wheels, 28 support rails. Centerless cylindrical grinding machine from Lidköpings Mekaniska Verkstads AB (Sweden) for through-feed and plunge-cut grinding. Classic mechanical-hydraulic design without CNC: cast iron bed, grinding wheel and regulating wheel with a support rail in between, belt drive with two speed stages that can be switched using variable pulleys. The machine was in operation until recently at a Swabian precision manufacturing company and was used there approximately once a month; it was sold solely due to lack of space. An unusually complete set of accessories is included: 14 grinding wheels and 4 regulating wheels, 4 mounting flanges, and 28 support rails – making the machine ready for use without any further procurement. For the 2C series, service, spare parts, and overhauls are still available today in Germany and from the brand owner in Sweden. EQUIPMENT - Regulating wheel spindle with support rail - Feed trough for through-feed operation - Separate hydraulic unit (ASEA motor) - Separate control cabinet with relay control and compressed air maintenance unit - Variable pulley drive, 2 speed stages - 14 grinding wheels, 4 mounting flanges, 4 regulating wheels - 28 support rails in a wooden crate TYPICAL APPLICATIONS - Pins, bolts, dowel pins, and drift pins – through-feed grinding to final diameter - Shafts, axles, and round bars in series, also as preparation for centerless grinding - Rollers, sleeves, and bushings – external cylindrical grinding in one pass - Tubes and bar stock to size and roundness - Parts with a flange or shoulder – in plunge-cut operation Kodozvh Ulspfx Ai Rodr - Rework and repair of precision parts in tool and contract manufacturing operations

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller Kdjdpfxev Sqy Ts Ai Ror -Puller: groove width 12 mm -Dimensions: see drawing in the photos -Dimensions: 150/130/80 mm -Weight: 2.0 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Kjdpfx Ajw Dn Siji Rjdr -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 62-69 mm / Left thread. -Grinding wheel: Ø 450 x 40 mm -Transport dimensions: Ø 450 x 140 mm -Total weight: 30 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Kjdpfx Aewux Shei Redr -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 40-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.8 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 34-43 mm / M50 -Type designation: not available Kedpfx Aewux Ucji Rjdr -Dimensions total Ø 180 x 80 mm -Weight: 7 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm Kdodowvp H Eepfx Ai Rer -Mounting: Hole shaft cone Ø 56-59 mm -Type designation: not available -Dimensions total Ø 260 x 120 mm -Weight: 14.3 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-49 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.6 kg Kdsdjwux S Ispfx Ai Rjr

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Kdsdpfx Aiewuyags Rer -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 46-59 mm / M50 -Type designation: not available -Dimensions total Ø 180 x 80 mm -Weight: 7,1 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Kjdpfewux Snsx Ai Rjdr -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 7,3 kg

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos Kodpfxsrxw E Ne Ai Rodr -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Puller: Grinding wheel puller -Dimensions: see photos Kjdpfxewuyc Uj Ai Rodr -Dimensions: 195/105/H90 mm -Weight: 2.9 kg

Condition: good (used), Year of construction: 1970, functionality: fully functional, Data : Tip width 300 mm Kdjdpfx Aszu Incji Rsr Tip height 150 mm External grinding spindle 4.0 kW Grinding wheel max. 400 x 80 x 127 mm Spindle cone MK4 Workpiece headstock 0.55 kW Workpiece speeds 30 - 450 rpm Internal grinding spindle 1.5 kW

Condition: ready for operation (used), Year of construction: 1989, Gear grinding machine NILES ZSTZ 10 H Table diameter: 1000 mm Max. working diameter: 1250 mm Module: - Min.: 2 - Max.: 25 Max. helical angle: 45 degrees Max. workpiece weight: 4000 kg Number of teeth: 10-250 mm Kdodpfx Aiszk E U Ej Rsr Dimensions: 7700x4540x3320 mm Machine weight: 30 tons A set of change gears is available. Video of the machine in operation is available!