Used Gear Shaping Machines for sale (71,781)

Condition: used, Year of construction: 1996, workpiece diameter 240 mm Fodpfx Aet Hwvmjkhjgf centre distance 0 mm honing length max. 500 mm max. module 5 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, Fsdpfxet Hw D Re Akhsgf the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 Fodet Hw Hxspfx Akhogf min. module 4 total power requirement 15 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R Fgodpot Hw R Djfx Akhsf CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact Fedpfx Aexvdryekhegf • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. Fgodpfx Akot Hwnishof * Various small parts.

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm max. module 20 Fgodpet Hwptjfx Akhsf min. module 1,5 total power requirement 1 kW weight of the machine ca. 3 t dimensions of the machine ca. m

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Fgedpfx Ast Hwxhekhjf Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Fjdpfst Hwzpox Akhogf We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm max. module 5 min. module Fodpot Hw Ebjfx Akhogf total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Manual Two Flank Gear Tester

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm Fgsdpet Hwu Aefx Akhjf max. module 5 min. module 1 Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 Fodst Hwxbspfx Akhegf min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm Fedpfxjt Hwxzs Akhogf max. module 8 min. module total power requirement 7,5 - 22 kW weight of the machine ca. t dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: used, Year of construction: 1993, max. wheel diameter 330 mm gear width 180 mm Fgjdpfxot Hwyfs Akhsf total power requirement 12 kW weight of the machine ca. 7500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, NEXUS: Trusted by Professionals Fgedpfx Akszphlwshef Proven Performance in Contour Edge Banding A proven contour edge banding machine designed for easy operation by users of all experience levels. Continuously improved through real customer feedback, NEXUS incorporates innovative features that significantly increase the speed and efficiency of your production process. Key innovations include a 3D laser scanning system that accurately copies the panel contour and measures the required edge band length with millimetric precision, a chassis-integrated edge band roll feeding table, and convenient automatic or manual operating modes selected through the touchscreen control panel.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 100 m/min Engine power: 5.5 kW Control panel Accelerator Dimensions: 500 x 150 cm Hydraulic drive Year of manufacture: 2006 5 transverse chains Pneumatic pressure roller for the drive rollers Fsdpfxozlpuxe Akhjgf

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, Fgedjzkvvyopfx Akhsf TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: good (used), functionality: fully functional, in good condition Fgjdpozic H Nefx Akhsf comes with many accessories see photo

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5-K/500 Fjdov Dtmmepfx Akhogf -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm Accessories: Includes extensive accessories (see photos) -Not included: Template for helical gearing -Machine dimensions: 2300/1460/H1870 mm -Accessory dimensions: Pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: used, Technical details: z-travel: 1250 mm Fgedpev U Un Hefx Akhef swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM Superset NT four-sided planer Fedpfozk Ap Hsx Akhjgf Minimum working width: 25 mm Maximum working width: 240 mm Minimum working height: 6 mm Maximum working height: 120 mm Number of spindles: 4 1. Bottom 2. Right 3. Left 4. Top Chrome-plated work tables Automatic electronic adjustment of working dimensions

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling planer, net price €68,800 Technical specifications: Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle, 5.5 kW (7.5 HP) motor First right vertical spindle, shared motor with the left vertical spindle, 11 kW (15 HP) First left vertical spindle, shared motor with the 1st right vertical spindle Second right vertical spindle, 5.5 kW (7.5 HP) motor First upper horizontal spindle, 7.5 kW (10 HP) motor Second upper horizontal spindle, 7.5 kW (10 HP) motor Second lower horizontal spindle, 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable 5 - 30 m/min. 4 kW (5.5 HP) motor Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. All spindles have high rotational accuracy. Basic equipment for PowerLock. Surfacing table length 2 m (including a longitudinal guide) Marathon Coating for the machine table and fences Special coating for protecting table segments and fences against excessive wear. Recommended for processing abrasive materials (e.g. tropical wood, MDF, chipboard). OPTION TO PURCHASE THE FOLLOWING MACHINES AT SEPARATE PRICES: 1. Weinig Rondamat 960 Powerlock (automatic straight knife and profile grinder), net price €13,500 Specifications: Weinig Rondamat 960 Powerlock / HSK profile grinder. High-precision knife grinder for sharpening straight knives and profiling with a template. Sharpening straight knives in the cutting block. Manual grinder for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: ceramic 5 mm, borazon 10 mm Grinding wheel bore: 60 mm Tool circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1.1 kW Spindle speed: 1700/2000/2400/3000 rpm Clearance angle: Radial: (rear) 10 - 30 degrees, Axial: 0 - 20 degrees For rotary heads up to 60 degrees Coolant tank approx. 50 liters Table feed 0 - 240 mm Electrical connection approx. 2 kW POWER LOCK SYSTEM option For grinding Powerlock tools. Tool holder with manual quick-change HSK system. Radial table mounting with precise adjustment, max. tool width 240 mm. Fedpfsytd S Nox Akhegf 2. WEINIG OptiControl 970095 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 Tool diameter max. 300 mm Tool length 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R) and height (H) and display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools NEW PowerLock adapter HSK63, shank D=50 x 260 mm 3. Weinig Template maker Isel 3020 template milling machine, net price €1,700 Application: Profiling milling Creating templates for tools used for further processing on the machine, e.g. Weinig Rondamat 4. POWERLOCK MOUNTED CUTTING HEADS, price €7,500 Two cabinets full of cutting heads for various applications, approximately 45 pieces.

Condition: used, functionality: fully functional, Maximum diameter with counter support Maximum tooth width for axial milling Straight-tooth gearing Outer diameter 250 mm Outer diameter 50 - 100 mm Outer diameter 100 - 250 mm Fgodpfx Aszhhcajkhjf Helical gearing up to 45° Tooth helix angle Outer diameter 35 - 100 mm Outer diameter 100 - 250 mm Maximum tooth width for radial-axial milling Maximum module Maximum tooth helix angle Smallest number of teeth to be milled 190 mm 200 mm 140 mm 200 mm 240 mm 5 mm Any Tool Maximum diameter Maximum length Max. tangential feed movement of the milling cutter Max. vertical feed movement of the milling cutter Indexing table Distance between the center of the milling cutter and the center of the indexing arbor Diameter of the indexing table 140 m 165 mm 100 mm 260 mm 50 - 250 mm 300 mm 110 mm 350

Condition: excellent (used), functionality: fully functional, Working dimensions: 230x160mm Spindle configuration: 1. Lower 15kW – Powerlock 2. Right 15kW – Powerlock 3. Left 15kW – Powerlock 4. Upper 22kW – Powerlock 5. Lower 15kW – Powerlock 6. Upper 30kW – Powerlock 7. Lower 15kW – Powerlock Feed drive - 7.5kW Spindle speed 12,000 rpm Pneumatic pressure rollers for the infeed Feed drive on cardan shafts Fjdjzi Tz Repfx Akhogf Smooth feed speed adjustment 6/36 m/min Automatic lubrication of the table Table made with MaratonCoating technology Control system: PowerCOM with motor control in Polish Soundproof cabin VibroControl vibration sensor Year of manufacture: 2010 Highnech E1 feeder, 2010 Infeed rollers driven by a 7.5 kW hydraulic pump.

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine Fgsdpfepxmliex Akhef with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle