Used Gleason-Pfauter Gear Hobbing Machine for sale (71,118)

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Nedpfxsrtrzdj Agrodb Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Year of construction: 1940, condition: used, Automatic universal gear hobbing machine for manufacturing spur gears and helical gears. Largest milling diameter: 120 mm Smallest milling diameter: 5 mm Smallest tooth pitch: Module 0.30 Largest tooth pitch: 2 mm Largest milling length: 100 mm Ndsdpfx Ajkw T Rmogrjb Complete with all accessories.

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Ndedex Szm Ajpfx Agrsb Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125

Condition: refurbished (used), functionality: fully functional, Refurbished milling head from Pfauter PE150. Ndsdpfjzr Hc Tsx Agrsb

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm Ndodpfx Agocrd Nmoreb

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: Nedpfxsw Hquxe Agrodb • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: like new (used), functionality: fully functional, workpiece weight (max.): 3 kg, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 200 mm, workpiece diameter (max.): 180 mm, milling length: 200 mm, overall weight: 5,000 kg, rotational speed (max.): 3,000 rpm, rotational speed (min.): 400 rpm, tool diameter: 80 mm, Equipment: documentation/manual, rotational speed infinitely variable, This machine is completely dismantled and rebuilt from the ground up. During the overhaul, it undergoes comprehensive modernization with state-of-the-art technology and the latest premium-quality components. Following refurbishment, the machine is presented in a technical and visual condition equivalent to new – reliable, high-performance, and future-proof. The equipment and configuration can be tailored individually to your requirements, ensuring maximum productivity in your production environment. Ndedpfxsx Af A Hs Agreb

Condition: excellent (used), Year of construction: 2008, Siemens Sinumerik 840 D, 5 axes controlled. Nsdpfx Agjza Egbsrjdb Wheel diameter max 2000 mm 700 mm wheel width Machine weight 35,000 kg Space requirements approx. 6.9 x 8.4 x 3.7 m

Condition: ready for operation (used), Year of construction: 1981, Stankoimport gear hobbing machine 5K328A Year of manufacture: 1981 Max. diameter of the gear wheel: - with counterbeam: 800 mm - without counterbeam: 1250 mm Max. module: 12 mm Max. width of the gear wheel: 560 mm Min. number of teeth: 20 Helix angle: +/- 60 degrees Table diameter: 935 mm Max. weight on the table: 2000 kg Hob arbor taper: Morse 6 Hob arbor speed range: 32 - 200 RPM Working feeds: - vertical: 0.5 - 5.6 mm/rev - radial: 0.22 - 2.6 mm/rev - tangential: 0.07 - 2.58 mm/rev Njdpezq Sq Hsfx Agredb Main electric motor power: 10 kW Net weight of the machine: 14 tons Change gears, arbors, and support available! Video of the machine in operation available!

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 Ndsdpfx Ajv U T Dyegrjb spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 weight of the machine ca.: 15 t table turning speeds: 100 U/min table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Ndedpfoyz Sd Rsx Agrjb Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion *

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING Ndjdpfx Ajxupg Togreb See document

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 130 mm max. module: 3 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Njdey Nk Hgepfx Agrodb Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor *

Condition: like new (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: AC, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 115,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, milling spindle motor power: 82,000 W, The machine has been in service for many years. The ZFWZ 5000 comes from Modul's Chemnitz gear machine construction division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that holds the Modul design archive. Proven kinematics, new electrical components, new drives, and new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. The machine mills external gears, both straight-toothed and helical, up to module 40 using the hobbing process and up to module 50 using the single-indexing method. With the internal milling attachment, internal gears are produced for gear rings for large rolling bearings, rotary couplings, and planetary hollow gears, as required in wind power, mining, crane, and shipbuilding technology. Workpieces with a diameter of up to 5000 mm can be accommodated on the 4000 mm table. The milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for both roughing with high material removal rates and finishing with precision. Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance between milling spindle axis and table axis 300–1800 mm, distance between milling spindle axis and table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full spare parts and support availability, in a climate-controlled switch cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without requiring in-depth G-code knowledge. Geometry acceptance is performed according to manufacturer's standards or DIN standards with a protocol, jointly with you in Chemnitz. The scope of supply also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss-lubrication systems, a hydraulic unit, a coolant system, and the operating manual. Nsdpfx Aez Etmpjgrjdb

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Nedpsxwlthefx Agrsdb Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: used, Year of construction: 2006, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW Nedpfx Aovxwr Ajgrsdb weight of the machine ca. 10,00 to dimensions of the machine ca. 6,10 x 4,40 x 3,30 m coolant filtering unit Hoffmann HSF 100 V

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Ndsdev Ehbbopfx Agrsb Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156# Ndsdpfx Agsruakgereb

Condition: ready for operation (used), Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible. Nsdsxl Upzjpfx Agrodb

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 280 mm max. module: 7 weight of the machine ca.: 13 t table turning speeds: 100 U/min table diameter: 250 mm min. number of teeth: 4 hob turning speeds: 1500 U/min max. hob diameter: 160 cutter length max.: 230 mm Ndodpfx Ageyzxbcoreb Machine in good condition. Available 01.08.2024 *

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Nodey Rgm Espfx Agrjdb Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: used, Year of construction: 2007, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm diameter of tools min 69,85 mm tooth width max. 58 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control 160 i - MB FANUC total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI With EWAB robot cell (KUKA robot) without coolant filter system Nsdjynbdlopfx Agrodb Fire extinguishing system without CO2 bottles Cooling oil return with various pumps / collecting basins Threading device A1/B2 axes with measuring probe Clamping device for a pinion shaft External spindle oil cooler Extraction system "pinion shaft"

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 13230, wheel width: 25 mm, wheel diameter: 130 mm, controller model: Siemens 840D, spindle diameter: 85 mm, stroke rate (max.): 2,500 1/min, TECHNICAL DETAILS Wheel diameter max.: 130 mm Wheel width: 25 mm Module max.: 3 Module min.: 0.5 Ram spindle diameter: 85 mm Stroke rate: 500 - 2,500 strokes/min (continuously adjustable) Stroke: 30 mm MACHINE DETAILS Control model: Siemens 840D Total power requirement: 48 kVA Dimensions & Weight Space requirement (L x W x H): 4,700 x 3,000 x 3,300 m Machine weight approx.: 11.5 t EQUIPMENT Tailstock with point Chip conveyor Hydraulically actuated tailstock arm and linear guides Ndodjzb Dtcopfx Agrob

Condition: used, Year of construction: 2005, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm Ndsdpfxjynmm Ee Agrjb diameter of tools min 69,85 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available

Condition: used, Year of construction: 2003, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Ndodpfx Aoza Tyvogrob The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane The equipment will be available for sale starting March 2027, as it is currently still in use within the production process