Used Heuft Heuft Inline Ir Empty Bottle Inspector (2013) for sale (10,260)

Year of construction: 2013, operating hours: 36,800 h, condition: used, Svetruck 1260 with approx. 36800 hours. Runs great Kdedpfx Ajv E Al Uenwon

Condition: like new (used), Bought new in 2022 and only used for a few months before the factory went Bankrupt. As new condition. 1 year guarantee. Kdsdpfxeyivtqs Anwsn

Condition: used, Year of construction: 2012, machine/vehicle number: LV45, Technical Summary and Application Scope – ATES Giorgia 6000 bphThe ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections.Main Technical DataType: Industrial glass bottle washer and rinser, suitable for recycled and new bottles.Nominal output capacity: up to 6,000 bottles/hour depending on bottle format, contamination level, and line configuration.Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows.Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance.Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing.Installed electrical power: approx. 20 kW.Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley).Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar.Drainage: integrated rinse and tank drainage via 2″ pipeline.Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection.Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage.Filtration: internal filtration plus 0.2 μm microfiltration for process water.Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency.System Architecture and Process FlowReturnable bottle cycle (full washing and rinsing)Automatic loading into baskets via push bars.Pre-wash spray to remove dirt and label residues.Immersion in hot caustic bath to disintegrate adhesives and organic matter.High-pressure internal and external washing through jetting manifolds.Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water.Continuous label and debris extraction with filtration to prevent clogging.New bottle cycle (rinsing only)Spray pre-wash.Pre-treatment with detergent solution. Kdsdpfsxqmqzsx Anwon

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 300 mm, saw blade bore: 30 mm, Double saw with OMGA feeder Kodpfx Aozcv Iujnwsdn

Condition: used, Year of construction: 2013, total length: 3,050 mm, total width: 1,650 mm, total height: 2,350 mm, Colour: Grey Weight: 5.690 kg - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7304138524 - Drive system: CNC - Control system brand: Durma - Power [kW]: 7.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 60 - Max. working width [mm]: 2050 - Column gap [mm]: 1720 - Backgauge depth [mm]: 800 - Crowning system: Mechanical - Tools included: Yes - Options: Digital readout - Transport dimensions: 3050mm x 1650mm x 2350mm (l x w x h) - Transport weight [kg]: 5690kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kdsdpfxszbhy To Anwen Lukas van Rossum

Condition: good (used), IR thermography system, brand: Thermo Sensorik Kdodpfezcmldex Anwjn Model: Thermo Spector Year of manufacture: 12/09 Scope of delivery: 1x InSb 640 SM thermographic camera (serial number 0001983179, format 640x512 pixels) with power supply and temperature display 1x Light box with power distribution unit and vacuum distribution unit on a motorized table, height-adjustable stand with cable winch for the IR camera 1x Thermal test plate (temperature-controlled solar cells - contact unit) with vacuum suction, temperature control unit and electrical excitation (thermostat and vacuum pump not included) 1x Control system includes: - LED matrix control - power supply for 6 LEDs (Thermo Sensorik LED Control Unit, S/N 000207013) - Power supply (Thermo Sensorik Power Supply + Multi-I/O-Box, S/N 000196029) - Power source (Höcherl & Hackl NL Series Source & Sink Model NL20V20C20) - Hardware includes a PC-compatible computer with camera interface, MPS5 software and Lock_In Suite software - Monitor, keyboard, mouse, manual

Condition: used, Year of construction: 2013, Overview This high-performance can filling line was manufactured in 2013 by KHS and is designed for large-scale beverage production, particularly beer in aluminum cans. With a capacity of up to 48,000 cans per hour (500 ml), the line represents a modern, high-speed solution including depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The core of the line consists of a KHS Innofill DVD 92 volumetric filler combined with a Ferrum F708G high-performance seamer, ensuring precise filling and reliable closing at maximum output rates. The line has been well maintained and remained in production until February 2026, and is available from Q1 2026. The overall installation features a compact, high-density layout with advanced conveyor and process integration, typical for modern KHS canning lines. Technical Data Capacity: 48,000 cans per hour (500 ml) 41,000 cans per hour (568 ml) Container type: Aluminum cans Formats: 500 ml 568 ml Can dimensions: Diameter: 66.30 mm Height: 168 mm Lid specifications: Material: Aluminum Diameter: 59.44 mm Height: 2.07 mm Product: Beer Filling technology: Volumetric pressure filling with MID (magnetic inductive flow meters) Seaming technology: High-speed multi-head can seamer Pasteurization: Flash pasteurizer (KZE system) Condition: Very good condition, regularly maintained Availability: Q1 2026 Scope of Delivery Depalletizer | KHS | INNOPAL ASH-LD | Layer depalletizer with pallet lift; up to approx. 450 layers/h | 2013 Filler | KHS | INNOFIL DVD 92 | Volumetric pressure filler with MID technology; up to 48,000 cph | 2013 Seamer | Ferrum | F708G | High-speed can seamer with 8 stations; up to approx. 60,000 cph | 2013 Lid Feed System | NSM Magnettechnik | – | Automated lid feeding and distribution system | 2013 Flash Pasteurizer | KHS | INNOPRO KZE 250 | Continuous flash pasteurization with buffer tank | 2013 CIP System | KHS | INNOPRO CIP | Multi-tank CIP system (1,000 – 3,000 L) | 2013 Fill Height Inspector | KHS | Innocheck CUB | Fill level and closure inspection system | 2013 Checkweigher | Radwag | DWT/RC 30 HP | Dynamic weight control system | 2013 Shrink Packer | KHS | INNOPACK SP A-M | Film shrink packer; pad + film capability | 2013 Pack Conveyor | KHS | INNOLINE GTR | Pack transport system | 2013 Can Conveyor | KHS | INNOLINE BTR | Can transport system | 2013 Pallet Conveyor | KHS | INNOLINE PTR | Pallet transport system | 2013 Pallet Warehouse | KHS | INNOLINE MPH 1-1 | Pallet buffer and storage system | 2013 Palletizer | KHS | INNOPAL PB1N1 | Automatic palletizing system | 2013 Pallet Wrapper | ROBOPAC | Genesis Futura 40 | Automatic ring wrapper; up to 95 pallets/h | 2020 Kjdpfjyyviusx Anwsdn

Condition: excellent (used), Year of construction: 2007, - Capacity: 10,000 bottles/hour - Year of manufacture: 2007 - Equipped with an ozone generator - Manufacturer: PROMEC - Model: Rotonech - M1110-36 - 2 - Type: Two-channel sterilizer-rinser - With recirculation tank, pump, and filter - Nozzle heads: 36 pieces - With enclosed hood and ozone air extraction - Conveyor height: 1250 mm (including additional base supports) Kdjdpfx Aszb H Nmenwjn - Bottle formats: from 55 mm to 99.8 mm (total of 20 different bottle types) - Direction of travel: Left to right Dimensions: - Width: 1900 mm - Depth: 2200 mm - Height: 2250 mm - Machine available from the end of July 2026 - Machine in good condition

Condition: used, Year of construction: 2005, Overview The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs Capacity: 15,500 bph Cell Pitch: 95mm Bottles per row: 16 Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg YOM 2005 Formats: 0,5l 0,75l The Machine in Detail / Equipment Features Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included Rotating Spray nozzles Single End Machine Label discharge rear right Label press mounted to the machine Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Kjdpfszbha Hox Anwodn

Condition: used, Year of construction: 2003, Overview This Kettner Blitzpac Junior E 3T bottle packer, manufactured in 2003, is designed for the automatic packing of PET bottles into beverage crates. The machine is configured for the 20 x 0.5 l crate format and is equipped with 4 packing units, each with 4 x 5 positions, matching the required 20-bottle crate layout. The system uses an automated gripper head / matrix gripper assembly to pick bottles from the conveyor lanes and place them into crates. The machine includes stainless steel lane guides, modular chain conveyors, SEW-Eurodrive gearmotors, pneumatic components and safety guarding with protective fencing and transparent panels. The machine is identified as Kettner Junior E 3T / Blitzpac Junior E 3T. Technical Data Manufacturer: Kettner GmbH / Krones Group Machine Type: Bottle packer / crate packer Model: Blitzpac Junior E 3T Year of Manufacture: 2003 Application: Packing of bottles into crates Format: 20 x 0.5 l crate Configuration: 4 packing units, each with 4 x 5 positions Gripper System: Pneumatic matrix gripper for bottle handling Conveyor System: Modular chain conveyor with stainless steel lane guides Drive System: SEW-Eurodrive gearmotors Safety: Protective fencing, transparent guarding, safety / sensor equipment Electrical Supply: 230 / 400 V AC Current Type: 3-phase Frequency: 50 Hz Nominal Current: 13 A Condition: Used, installed in industrial bottling environment Kjdozbg T Eopfx Anwsdn

Condition: used, Year of construction: 2013, 29.000 hours since overhaul Kdedpfezaq Nzex Anwen Total hrs 62.568 KWe: 2000 Voltage: 11000

Condition: excellent (used), Year of construction: 2013, HT 665 MC plus TCMY - FANUC Multi-axis CNC turning machine for complete machining of turning/milling parts; Integrated spindle motors (ISM) on the main and counter spindle with thermocompensation system (liquid-cooled) Drive power: Main spindle - 29 kW Counter spindle - 22 kW Speed range: Main spindle 0 - 5000 rpm Counter spindle 0 - 7000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (max. bar diameter ø 65mm) Counter spindle: KK6 Y-axis: Travel range +/- 50mm The Y-axis is designed so that the resulting cutting forces are distributed across two axes. This results in extremely high rigidity for all machining operations. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology FANUC 18i TB with Manual Guide i dialog programming. Includes: ·Draw tube cylinder including draw rod ·Part ejector and flushing through the counter spindle ·2x 12-position tool turret VDI 30 radial with direction logic for up to 2x 12 driven tool stations! Swivel speed adjustable with feed switch. o Performance data: o Max. 6.7 kW at 2650 rpm o Torque constant 25 Nm o Speed range 0-5000 rpm o C-axis for main and counter spindle ·Part removal device for the finished parts ·Chip conveyor with a discharge height of 1200mm programmable (Type "hinged belt") ·Coolant system integrated into the chip conveyor 2 pcs. high-pressure pumps with 14 bar 2 pcs. flushing pumps with 3.7 bar ·Electrostatic oil mist separator Kodpfxozczgvs Anwjdn ·Hydraulic unit ·Machine light ·Documentation Year of manufacture: 2013 Includes: two Hainbuch chucks, collet chuck for collets 185E plus reduction is also included.

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data Line type: Returnable glass bottling line Application: Beverage filling in returnable glass bottles Formats: 0.33 L and 0.75 L glass bottles Packaging: Bottles in crates Filler capacity: 18,000 bottles/hour Premix capacity: 22,000 L/hour Closure type: Plastic screw caps Labelling: Wet glue labelling, 2 aggregates Main machine years: 1996 – 2016 Dismantling planned: February 2027 Scope of Delivery Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 Crate Decapper | RINK | KM 690/4K | 2012 Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 Empty Bottle Inspector | Krones | Linatronic | 2014 Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 Labelling Machine | Krones | Universella | 2012 Closure Inspection | Syscona | Expert FHK | 2016 Inspection System | Krones | Checkmat 731 | 2012 Crate Packer | Kettner | 1996 Crate Inspection | Krones | Checkmat 708 | 2011 Palletizer | Matec | Rotomat 3B | 2002 Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000 Kjdoza Tx Sopfx Anwodn

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AA1/017355 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 9.5 - Type milling table: Beam table - Drilling unit present: Yes Kjdownii Rjpfx Anwsdn - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - System/software: SCM Maestro - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Current consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, mileage: 878,129 km, power: 310 kW (421.48 HP), first registration: 05/2013, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special equipment: Axle load measuring device, front axle load 8.0 t, start-assist with timer control, work lights, exhaust downwards to the right, right-hand exterior mirror with manoeuvring position, CB radio, compressed air connection in cab, high-pressure air unit, air horn, electrical system and lighting for swap body frame, cab with steel suspension, standard, fire extinguisher, Fleetboard vehicle computer, fuel tank: 630 litres aluminium, air intake on side of cab, roof air deflector (latchable, without base trim), 2-cylinder air compressor, tyre pressure monitoring system, side spare wheel hoist, retarder, acoustic reversing warning (external warning signal), tail lift switch, drawers under the window sill, circuit breaker, sunblind for side window, driver’s door, extra 24V socket in front passenger footwell, Fleetboard preparation. Additional equipment: Axle configuration: 6x2, Actros, trailer brake 2-line system, connectors left, trailer socket 24V / 15-pin, audio system: radio with USB connection, electrically adjustable and heated exterior mirrors, functional passenger seat, rear axle differential lock, steel air tank, EURO 6 engine, cab width: 2.30 m, cab: L StreamSpace, cab floor with 170 mm engine tunnel, foldable driver's seat back, suspension: air / air (full air suspension), electric window lifters, tinted windscreen, 100 A alternator, 12-speed gearbox – Type: G 211-12, AdBlue tank: 60 litres, rear axle crown wheel 440, info display 10.4 cm with additional indicator, body/chassis: chassis frame, lower comfort bunk, comfort central locking, communication interface, radiator louvre, regulated power steering pump, liftable trailing axle, engine 12.8 L – 310 kW R6 diesel (OM 471), engine brake, engine compartment encapsulation, single-tyred trailing axle, ramp mirror, spare wheel, residual heat utilisation, disc brakes front and rear axle, standard air-sprung driver’s seat, seat cover/upholstery: fabric, voltage converter 24V / 12V 10A, front splash guard, front axle stabiliser, additional stabiliser, rear/trailing axle, external storage flap left, 24V socket in cab, tachograph / EC control unit, cab door extension, aerodynamically shaped underbody cladding, front underrun protection, toll system preparation, drop-centre front axle, regulated water pump, permissible gross weight 25.00 t, auxiliary heater (water). * WDB9630201L747236 * First registration: 15.05.2013 * Chassis length: 7.10 m * Wheelbase: 4600 / 1350 mm * Net price! * All information provided without guarantee or warranty. Kodpfxorx Ndto Anwsdn Tel./WhatsApp:

Condition: used, mileage: 1,050,000 km, power: 324 kW (440.52 HP), first registration: 07/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), Tel.: call (Contact · Telephone · Mobile · WhatsApp) Kdsdpextd Euefx Anwen Special equipment: Storage box, Aero kit, car phone antenna, exterior mirror and wide-angle mirror, electrically adjustable and heated, mechanical battery master switch, curb mirror right side, electrically adjustable and heated, CB radio roof antenna, aluminum air tanks, cab with air suspension, driver’s seat comfort version, air-suspended and heated, with lumbar support and shoulder adjustment, flame-start system, generator 28 V / 120 A, 12-speed gearbox – type: ZF 12 AS, Tipmatic, controlled rocker brake EVBec, single-cylinder air compressor 360 cc with Air Pressure Management (APM), heated air dryer, additional air heater Eberspächer Airtronic D2, PTO NH/4C without flange, cab door extension, additional high-beam/fog lights with cornering light Additional equipment: Axle configuration: 4x2, ambient lighting, maneuvering/front mirror, trailer socket 24V / 7-pin, trailer ABS socket, anti-slip regulation (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, battery 175 Ah, onboard computer MAN-Tronic, rear axle differential lock, electronic braking system MAN Brakematic, EURO 6 engine, cab: Nordic insulation, cab: XLX, suspension: leaf / air, electric windows, remote central locking, tinted windshield, manual sunroof, body/chassis: tractor unit, rocker brake EVB, automatic climate control, heated fuel filter, fuel tank: combo tank – 400 l diesel + 60 l urea solution (AdBlue), multifunction steering wheel, raised air intake, engine 12.4 l – 324 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side-mounted spare wheel carrier, fifth wheel: Jost JSK 37 C, rear axle disc brakes, front axle disc brakes, rear side windows tinted, seat cover/upholstery: comfort quality, sun visor for windshield, sun visor for side window, driver’s door, spray suppression, rear axle stabilizer, front axle stabilizer, externally accessible storage box, tinted door windows, viscous fan, central locking, permissible gross weight 18.00 t * WMA06XZZ3EM631143 * Connecting rod bearing defective * Crankshaft ground, all components reassembled * Net price! * All information without guarantee

Condition: used, maximum load weight: 26,700 kg, overall weight: 32,500 kg, axle configuration: 2 axles, first registration: 02/2013, * Schmitz Cargobull Gotha SKI 18 SL * Rear tipper (half-pipe) * 2-axle * VIN: WSK000001270258 * Unladen weight: 5,800 kg * Payload: 26,700 kg * Gross weight: 32,500 kg Kodpfslhp Rzjx Anwodn * Kingpin load: 26,700 kg * Axle load: 9,000 / 9,000 kg * Trailer length: 8,775 mm * Trailer width: 2,550 mm * Trailer height: 3,280 mm * Tyres: 385 / 65 R 22.5 * Price on request * All information subject to change, errors excepted * Internal number: 0376 Tel./WhatsApp:

Condition: used, mileage: 954,025 km, power: 260 kW (353.50 HP), first registration: 05/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, Special equipment: Front axle load 8.0 t, trailer brake 2-line system, connections on the left, audio system: CD radio, compressed air connection in driver's cab, air horn, electrical system and lights for swap body frame, cab floor with 170 mm engine tunnel, tinted windscreen, 10.4 cm info display with additional indicator, 3-piece mudguards, fuel tank: 500 L aluminum, reinforced engine brake, revolving beacon, acoustic reversing warning (external warning signal), tail lift switch, drawers under railing, seats in cab: driver's comfort air suspension seat, exterior sun visor, additional 24V socket in passenger footwell, Fleetboard preparation, preparation for cooler / refrigerator. Further equipment: EURO 6 emission standard, axle configuration: 4x2, Actros 4, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, rear axle differential lock, steel compressed air tank, medium compressed air unit, cab: width 2.30 m, cab: L StreamSpace, cab: steel suspension, comfort, suspension: air / air (full air), electric windows, generator 100 A, 8-speed transmission - type: G 140-8, urea tank (AdBlue): 60 L, rear axle crown wheel 440, body/chassis: chassis, lower comfort berth, comfort locking system, communication interface, unregulated power steering pump, 2-stage air compressor, engine 7.7 L - 260 kW R6 diesel (OM 936), engine compartment encapsulation, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat upholstery: fabric, seats in cab: passenger function seat, seats in cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, front splash guard, front axle stabilizer, external storage flap left, external storage flap right, 24V socket in cab, tachograph / EC control device, cab door extension, aerodynamically shaped underbody panel, front underrun protection, CB radio prep, toll prep, cranked front axle, permitted total weight 18.00 t, additional water heater. * VIN: WDB9630031L763095 * Sleeper cab * Vehicle length: 9600 mm * Vehicle width: 2550 mm * Vehicle height: 4000 mm * Tail lift * TÜV valid until 05/2022 * Net price Kedpoqnqy Tsfx Anwjdn * All information without guarantee Tel./WhatsApp:

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 23,000 h, load capacity: 9,000 kg, lifting height: 15,500 mm, fuel type: diesel, mast type: duplex, power: 179 kW (243.37 HP), total length: 6,700 mm, drive type: Diesel, construction width: 4,150 mm, Empty container handler Load centre: 1220 Mast type: Duplex Transmission: ZF WG210 Condition: Ready for operation and fully functional Technical condition: Normal Kdjdpozaxkmjfx Anwen Elme 594 ND double stacking 20-40ft side spreader Stacking height 6+1 96

Condition: used, Year of construction: 2022, Manufacturer : CDA Kdjdpjzak Idefx Anwsn Model : E-fill Year : 2022 Type: Monobloc bottle filling line   Output: 25 units per minute Available sizes: 20 mm and 25 mm   Dosing type: peristaltic (CDA K-one pump) Number of filling heads: 1 (a second one can be installed; this may be subject to an additional quote) Nominal dosing volume (min/max): 5 ml / 1 L   Rotary screw-on capper (VS500) Detection of missing or incorrectly fitted caps: yes   Self-adhesive label system on a roll Maximum chuck diameter = 75 mm Maximum roll diameter = 260 mm Maximum labelling height = 155 mm Label trim allowance = 3-5 mm Minimum weight of the ribbon used: 90 g   Feeding system for containers using a manual accumulation table (TRI) Output accumulation table   PLC-controlled HMI: Omron Sysmac CP1L Spare parts available Weight: approx. 300 kg A video showing the machine in operation in our workshops is available

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: FA58, Used TECMI - Smipack shrink wrapper - 2013Technical Specifications & Performance DataThis automatic shrink wrapper is engineered for reliable bundling and shrink packaging in high-demand beverage production and industrial packaging environments. Manufactured by TECMI, the model BP802ARV 380R delivers consistent throughput and robust construction suitable for second hand and used bottling line integrations.Manufacturer: TECMIModel: BP802ARV 380RYear: 2013Production speed: 8,000–12,000 bpmFormats: PET 0.38L bottles, 24-pack bundlesContainer types: PET bottlesDimensions (X × Y × Z): 4140 × 3230 × 2095–2255 mmWeight: 1400 kgElectrical data: 440 V, 60 Hz, 27.25 kW, 45 A, 3PH+PEAdvanced Automation & Control SystemsDesigned for automatic operation, the TECMI BP802ARV 380R streamlines pack formation and shrink-wrapping with minimal operator intervention. Its architecture supports precise film handling, consistent sealing, and stable oven performance for uniform pack quality across long shifts. The electrical system is configured for industrial-duty 440 V, 60 Hz power, with optimized energy usage at 27.25 kW. Safety-rated components and clear operator stations help ensure dependable performance with straightforward controls suitable for modern production standards.Production Line Integration CapabilitiesThis shrink wrapper integrates smoothly as a standalone machine or in-line with upstream and downstream bottling equipment, including conveyors, fillers, labelers, and case handling units. It is well-suited to beverage production lines that handle PET bottles and require regular format changes for multi-pack configurations. The machine’s layout accommodates standard conveying interfaces for efficient infeed and discharge, enabling flexible installation within existing packaging machinery cells on used bottling line upgrades.Machine Condition & Maintenance HistoryThe machine is currently in storage, presenting an excellent opportunity for facilities seeking a second hand shrink wrapper ready to be recommissioned. Its year of manufacture (2013) and industrial-grade build provide a solid foundation for reliable operation after standard installation checks and start-up procedures.Operational Performance & VersatilityOptimized for PET bottle bundling in 24-pack configurations, the BP802ARV 380R provides consistent throughput across the 8,000–12,000 bpm range, supporting high-volume beverage production. The shrink tunnel delivers stable temperature control for tight, visually consistent packs. Its design supports common beverage applications where durable film seals and stable packs are critical for downstream palletizing and logistics.Installation Requirements & Site PreparationPlan for a footprint consistent with the layout dimensions (X: 4140 mm, Y: 3230 mm, Z: 2095–2255 mm). Provide a 3-phase 440 V, 60 Hz electrical supply with appropriate protection for a connected load of approximately 27.25 kW and 45 A nominal current. Ensure adequate ventilation around the shrink tunnel and safe access for operators and ma... Kjdpfxjyhbh Ds Anwedn

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls Ksdpfx Ajy Dvlksnwodn asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: used, Year of construction: 2015, machine/vehicle number: LC445, Technical Specifications & Performance Data The Used Complete Bottling Line Krones, from the year 2015, is engineered for high-efficiency operations within the beverage production industry. Designed to process up to 48,000 bottles per hour, this second-hand machinery is ideal for medium to large-scale production needs. Production Speed: 48,000 bottles per hour Compatible Bottle Formats: 0.38 L, 0.55 L Container Types: PET Neck Type: 30/25 Machine Components: 12 items Advanced Automation & Control Systems This used bottling line is equipped with advanced automation capabilities and a user-friendly control panel, ensuring high precision in filling, labeling, and capping processes. The line includes integrated safety features, adhering to stringent industrial packaging standards, making it a reliable asset for operators. The electrical systems and automation technologies ensure streamlined operations while maintaining optimal safety and efficiency. Production Line Integration Capabilities Built for flexibility, this bottling line seamlessly integrates with existing production setups, increasing overall efficiency across the board. Its format change capabilities allow for quick adaptation to different bottle sizes and types, ensuring continuous production with minimal downtime. The line supports multi-product flexibility, including various flat drinks and still products, enhancing its versatility in beverage production applications. Machine Condition & Maintenance History This bottling line is in a READY FOR OPERATION condition, expertly maintained to ensure peak performance. With comprehensive manuals available, the transition to operation is smooth and straightforward. Its reliability and operational readiness make it an excellent choice for those seeking second-hand machinery with proven performance history. Operational Performance & Versatility The line's design handles various flat drinks efficiently, with PET containers being the primary material. Its versatility extends to two main bottle sizes, delivering precision and quality across different product types. The machinery's capability to process both 0.38 L and 0.55 L bottles with consistent performance makes it an invaluable asset for beverage producers looking to expand their product range into still products. Installation Requirements & Site Preparation Kodpfx Aovlwpuonwsdn Proper space and utility setup are critical for the successful installation of this comprehensive bottling line. Adequate site preparation will ensure optimal performance, aligning with industrial standards for space utilization and utility support. Proper consultancy can aid in identifying specific spatial and operational requirements. Safety Standards & Compliance Certification Adhering to global safety standards, the bottling line includes extensive safety guards and protections to safeguard operators. Designed to meet high hygiene standards, it ensures that all bottling processes comply with necessary health and safety protocols, making it suitable for the most demanding industrial environments.

Condition: used, Year of construction: 2013, operating hours: 30,000 h, load capacity: 8,000 kg, fuel type: diesel, power: 85 kW (115.57 HP), gearing type: other, empty load weight: 13,460 kg, color: red, mileage: 30,000 km, first registration: 06/2013, suspension: other, driver cabin: other, emission class: none, fuel: diesel, Equipment: air conditioning, - Year of manufacture: 2013 Kdedozakuqepfx Anwsn - Approx. 30,000 operating hours - Incl. lifting frame, currently removed for transport, without forks - Inspection possible at any time in Bad Salzuflen, errors and prior sale excepted... Air conditioning, VAT deductible, from first owner, diesel

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Kdodjy Uimvspfx Anwjn Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feeding opening dimensions: 119.5 cm × 65 cm Condition: very good! Video of the machine in operation available upon request.