Used Ideal 7225-55 Ec3 Lt for sale (16,479)

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos Bdedpsw Dnx Nsfx Ahmoh -Grindstone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm -Weight: 31.1 kg

Condition: used, Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor clamping rail: 2 pieces -Groove width: 16 mm, length 370 mm -Hole spacing: 460 mm / Ø 16 mm -Dimensions: 505/55/H70 mm Bdedpfxet Rl U Es Ahmeh -Delivery/Price: complete -Dimensions: 505/55/H70 mm -Weight 3.4 kg/piece

Condition: good (used), Year of construction: 2023, operating hours: 159 h, Used, oil-free, variable 55 kW screw compressor Immediately available! (Subject to prior sale!) ALMIG LENTO 55 WK (water-cooled) with Air Control Premium controller The compressor is in very good condition and has only run for 157 hours so far. Year of manufacture: 2023 Operating hours: 157 h Technical data Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min Bedpfx Aexud Eqohmodh at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Year of construction: 2012, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit Bdjdpfjh I Ez Djx Ahmoh -Manufacturer: SAB, Power generating unit type D-4107 F -Previous use: Ship -Power: 44/55 kW/kVA 50 Hz -Engine: Deutz type BF 4M 2012 60 kW -Generator: Marelli type MJB 200 MA 4 -Note: without control, without cooling -Individual components: see photos -Dimensions: 1630/710/H1060 mm -Total weight: 840 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Bdjdpfx Ajgv Digjhmeh -Steering cylinder: stroke 144 mm -Piston rod: Ø 55 mm -Piston rod mounting: Ø 20 mm -Receiving holes: see photo technical drawing -Cylinder: outer Ø 105 mm -Dimensions: 510/155/H115 mm -Weight: 18 kg

Year of construction: 2023, condition: ready for operation (used), WHEEL CUTTING MACHINE FOR PALLET BLOCKS. MACHINE WORKING ON OCCASION. MINIMUM 50X50mm MAXIMUM 150X150mm Bsdpfxok Nf S Rj Ahmsdh

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 Bedperb E Hqsfx Ahmsdh -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Condition: used, variable speed geared motor, variable speed geared motor, electric motor -Manufacturer Motor Nord Type: SK63L/4 -Manufacturer of variable speed gear North type: SK01-R080U-63-L/4 -Motor power: 0.18 kW -Speed range: 55-275 rpm -Motor: adjustable -height shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 1 piece available Bdedscvvy Aspfx Ahmoh -Dimensions: 350/175/H305 mm -Weight: 13.9 kg

Condition: good (used), Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm Bodpfxjb A Nluo Ahmodh -Weight: 110 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Bdjdpfxjb A Nm Uj Ahmsh -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -Dufix: Nr/Var 46616 -Socket: Ø 50 mm -Weight: 6.8 kg Bsdpfx Ajb A Np Nshmodh

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Bedpfx Aheb A Nx Esmsdh -Motor: 0.6 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 16 mm L 10 mm -Number: 2x motors available -Price: per piece -Weight: 3.3 kg

Condition: good (used), Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder Bdedpfx Ahob A Sx Hemsh -Inner diameter: 55 mm -Outer diameter: Ø 110 mm -Width: 22 mm Price: per piece -Number: 12 available -Weight: 0.7 kg

Condition: used, functionality: fully functional, Air Liquide Arpege 55 Liquid Nitrogen Container With Storage Racks. Main characteristics include: - Aluminum vessel for both the long holding time and large capacity line: Bdsdpfx Ahsupttgjmjh - Long holding time - Large capacity - Light weight and resistant - High quality polyurethane paint - On wheels Good working condition. Please check out our other listings as well.

Condition: used, Used Envites model K800/55-50/30 chamber type filter press. Filtration surface: 49,5 sqm Chambers & Plates: 50 chambers, thickness 30 mm, (49) polypropylene 800x800 mm recessed plates and (2) end plates Cake volume: approx. 673,5 litre Others: max. filtration pressure 16 bar, closed delivery, (5) eyes per plate, double acting hydraulic ram with hydraulic agregate, plate shifter, CE Marked, ES Declaration of Conformity, Comprehensive technical documentation included. Specifications: Material: Carbon steel/polypropylene Plate Size: 800 x 800 # of Plates: 49 Delivery: closed Eyes: 5 Cake Capacity: 670 Plate Type: recessed Plate Thickness: 60 Bodpfx Ajzun Dwshmjdh Surface Area: 49,5 Closure: hydraulic Operating Pressure: 16 Weight: 5500

Condition: ready for operation (used), Year of construction: 2000, We offer Atlas Copco compressors: Type GA 55 Pressure: 10 bar Motor power: 55 kW Year of manufacture: 2000 Compressor with documentation Bdsdpfezvx Trsx Ahmoh

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 6,472 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,600 mm, drive type: Diesel, Side loader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Heater, fully enclosed cabin Bedpfxjzwzcxe Ahmsdh

Condition: used, Year of construction: 2013, Year of manufacture: 2013 240 V, IP 65 Operating pressure: 6-8 bar Bdodpfx Ahozrglzjmoh

Condition: ready for operation (used), X-travel: 500mm, y-travel: 250mm, z-travel: 145mm, table dimensions: 885x320mm, max. load: 250kg, rotational speed: 50-10,000/min, controls: HEIDENHAIN TNC 407, weight: 2.4t, operational hours counter: ca. 39,900h. Bdjdpehcxfpofx Ahmeh

Condition: ready for operation (used), Year of construction: 1999, Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement. Bdedpfoylbqysx Ahmjh

Condition: ready for operation (used), Year of construction: 2011, A modified MECO internal keyway slotting machine is available. Keyway width range: 4mm-45mm, max. square keyway diameter: 36mm, max. hexagonal keyway diameter: 36mm. The machine was modified and can now slot square and hexagonal keyways. Documentation available. An on-site inspection is possible. Bjdpfx Ahjy Hvqremedh

Condition: good (used), Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Reamers: machine reamers 36 pieces -Mount: Ø 16/22 mm Bdjdpfx Aoiay Hhohmjh -Diameter: 31.75 to 55 mm, see photo parts list -Transport dimension.: 240/230/H80 mm -Total weight: 18.5 kg

Condition: good (used), Year of construction: 2000, Miwe Ideal chamber furnace - Model 600/6 R - Used - Year of manufacture 2000 - Area 6 m² - Manual control Bdedpfxeznwtho Ahmeh - 6 chambers, 0.6 x 1.6 m - Hood with fan - Oil or gas burner - Industrial furnace - Good technical condition - Price upon request

Condition: used, mileage: 110,769 km, power: 96 kW (130.52 HP), first registration: 04/2001, overall weight: 5,600 kg, fuel type: diesel, color: yellow, gearing type: mechanical, emission class: euro1, loading space width: 2,100 mm, loading space length: 3,450 mm, loading space height: 390 mm, total length: 6,330 mm, total width: 2,180 mm, total height: 2,450 mm, number of seats: 3, Equipment: ABS, crane, Equipment: * Body/Superstructure: Platform with crane * Harms Body Construction * Platform with aluminum sideboards * Internal dimensions: 3,450 mm x 2,100 mm x 390 mm * Trailer hitch Varioblock Crane: * Palfinger PK 2.800 A * Year of manufacture: 2000 * Auxiliary drive for motor * 2-point outrigger system * Load hook Bdjdjzqhzhjpfx Ahmoh * No 5+6 control circuit available. Reach/Lifting capacity: * 3.15m = 830 kg * 4.35m = 600 kg * 5.60m = 460 kg Other: * Formerly a VW IAA trade fair vehicle * 2 previous owners (1x VW) * Originally delivered in Germany * Engine: 2.8 L - 96 kW * Payload: 2,495 kg Since 1972, we have been your reliable partner for everything related to cars/commercial vehicles in 28832 Achim, near Bremen. Behnke Commercial Vehicle Center constantly has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We offer attractive financing options at favorable special rates. If you are interested, we will be happy to prepare a customized offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: used, Barloader FMB Turbo 5-55 / 3200 A Bdodey Umvbjpfx Ahmsh