Used Ital Form S200 for sale (5,333)

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling. Lrsdjx Utd Eopfx Akysk

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Ljdpfshbu E Hex Akysrk Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml Lrjdsn D Ew Ispfx Akysk 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 99331, total width: 2,500 mm, total length: 2,840 mm, type of input current: three-phase, Equipment: documentation/manual, For sale is a high-quality flow pack machine for the efficient packaging of a wide variety of products. The system is in very good used condition, fully operational, and immediately ready for use. The machine is equipped with a Videojet printer, model 6210. In addition to the machine, the scope of supply includes a separately driven rotary table with a diameter of 1500 mm as well as a conveyor belt with a passage width of 275 mm leading to the rotary table. Furthermore, wrapping film is included in the offer. The specifications and quantities are as follows: AVBE 70 µ, 480 mm Core: standard Ledpov Nakpofx Akyerk Pallets: 2 Total quantity: 16,800 Im, 25,600 Um, weight approx. 871 kg

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: Lredsq Nn Hcspfx Akysk -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] - Gross Weight : 4100 [kg] EQUIPMENT - Tooling as per photo - Positive ejection on 2 punches - Ejector retraction in die - Various spare parts Lredpfx Ajuhb T Dekyjk

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] Ledeuhb Twepfx Akyork - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] Lredpfjuhb Tqsx Akyek - Motor : 4 [hp/kW] - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] Lredpfjuhb Tkox Akyjk - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo

Condition: used, Year of construction: 2014, machine/vehicle number: 101453, functionality: fully functional, power: 368.5 kW (501.02 HP), pressing force: 4,000 t, stroke length: 1,600 mm, operating speed: 200 mm/s, ram plate width: 1,900 mm, ram plate length: 1,900 mm, clearance between the columns: 6,500 mm, overall weight: 480,000 kg, Fagor JBe-4000-2.5x2.5-2013 4,000T Hydraulic Forming Press (2014) Lrsdpsyzr Hfjfx Akyok 0–4,000 tonnes variable ram pressure 1,900mm ram diameter 2,500 mm x 2,500 mm T slotted top platten 2,500 mm x 2,500 mm T slotted bottom platen 6,500 mm distance between side columns 1,600 mm length of ram stroke 200 mm/s ram speed 12 mm/s pressing speed 368.5 kW total electrical power 480 tonnes total weight of machine 2x overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists Siemens programmable touch screen console for machine and cranes

Condition: ready for operation (used), functionality: fully functional, sheet thickness (max.): 1 mm, input voltage: 380 V, type of input current: three-phase, Used Ras 22.15 roll forming machine with 7 pairs of rolls, complete with rolls for Pittsburgh profile (thickness 0.6-1.0 mm) and rolls for 90° bending. The infeed and outfeed guides are hardened. Lredpfx Aksy E Ixfoyek

Condition: used, Year of construction: 2023, operating hours: 810 h, machine/vehicle number: 22-2261, overall weight: 97,500 kg, feed force X-axis: 2,750 N, feed force Z-axis: 3,500 N, input voltage: 380 V, Information will follow shortly. Lrjdpfxsy A Sccs Akyok

Condition: used, functionality: fully functional, total height: 3,700 mm, total width: 5,000 mm, total length: 7,700 mm, For sale: well-maintained Hassett International vacuum forming machine. The machine has a maximum working area of 3000 × 3500 mm and can form products up to 1100 mm deep. It is ideal for manufacturing spas, swimming pools, hot tubs, and other large-size products. Technical specifications: • External dimensions: 5000 × 7700 × 3700 mm • Can be disassembled into smaller parts for transport • Maximum sheet thickness: up to 8 mm (acrylic, ABS, etc.) • The control computer allows switching on only the required heating sections of the oven and adjusting their temperatures – for smaller products, the entire oven does not need to be in operation Included in the set: • Oven (with ceramic heating elements) Lsdpfx Akew Nhdheysrk • Hydraulic lift table • Vacuum pump • Vacuum tank • Computer and control electronics • Worktable • One mould (octagonal, black) The green rectangular mould is not included. The machine is in daily use. Testing on-site is possible, and training can be provided. Upon request, we can provide contact details of a reliable company that can disassemble, transport, reassemble, and maintain the machine in the future.

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT Ledpfx Ajxya Hzskyjrk MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: good (used), functionality: fully functional, total length: 690 mm, total width: 1,380 mm, total height: 1,620 mm, overall weight: 540 kg, type of input current: three-phase, input voltage: 400 V, power: 1 kW (1.36 HP), funnel diameter: 380 mm, DGUV certified until: 05/2027, ambient temperature (max.): 40 °C, Rheon Model KN100 Cornucopia Encruster Maximum output approx. 60 pieces per minute, depending on product. Ledpfjrhvu Asx Akyjrk Weight range from 10 to 90 grams. Large stainless steel feed hoppers Each equipped with (2) feed screws Wide discharge conveyor Digital touch control. Compact forming, filling, and portioning machine Machine is mobile Connection: 400V, 16A-CEE plug Used machine Delivery service More bakery machines in stock!

Condition: good (used), functionality: fully functional, total length: 400 mm, total width: 430 mm, total height: 380 mm, overall weight: 49 kg, type of input current: AC, input voltage: 230 V, year of last overhaul: 2024, product length (max.): 75 mm, power: 3 kW (4.08 HP), product length (min.): 75 mm, working width: 400 mm, DGUV certified until: 05/2027, ambient temperature (min.): 20 °C, ambient temperature (max.): 40 °C, TOP Varioback unit for 13 tartlets. Stainless steel countertop appliance. Temperature adjustable up to 300°C. +++ Robust technology +++. Connection: 230V. Dimensions: 430 x 400 x 380 mm (W x D x H). Used device. More bakery machines in stock! Lredpfeuat Abox Akyok

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm Lsdpfxed H Ur As Akyjrk - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Year of construction: 1996, condition: excellent (used), The line is an original American-made line for upgrading sections of rollers for drawing profiles. Lrodpfx Ajh Ni Dujkysk The American-made line has a plate and a huge number of additional rollers for pulling pipes! - Year - 1996 - Line use pulsed TIG welding for argon blowing and it can be upgraded by laser and resistance. - Electric consumers 30 kW. - Profiles - stainless steel profiles ellipse, D profiles, hexagonal, square and rectangular pipes. - In profiles of all dimensions from sheet metal width 125 mm and thickness 1 to 2.5 mm. - Speed - 30-90 m/h - Cutting unit - cross section by hand or with a band saw. - Line length 12 to 15 meters.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Lrjdsyx Na Rjpfx Akyjk

Condition: like new (used), Year of construction: 2022, operating hours: 170 h, functionality: fully functional, machine/vehicle number: 156-600, total height: 2,920 mm, total width: 1,480 mm, total length: 2,600 mm, type of input current: AC, overall weight: 2,500 kg, film width: 100 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (min.): 50 mm, product height (max.): 110 mm, product width (max.): 50 mm, product length (min.): 50 mm, product width (min.): 50 mm, product length (max.): 110 mm, nominal power (apparent): 8 kVA, filling weight (min.): 5 g, filling weight (max.): 20 g, air demand: 0.4 m³/h, input current: 12 A, roll diameter: 76 mm, Equipment: documentation/manual, safety light barrier, The FlexiBag Bi 260 was acquired as a test machine for processing polymer-bound phase change granules. All specifications regarding packaging width, package weights, and output rates refer to polymer granules with a bulk density of 550 kg/m³ and a density of 860 kg/m³. In principle, the machine can be used for all types of granulates, powders, etc. For dosing, a BW211 Micro belt weigher from DOWATEC is installed. This enables very precise dosing. Thanks to two dosing belts, a high productivity of 30 cycles per minute can be achieved by the packaging machine. Lredpfx Aeyi Eqxskyek The FlexiBag Bi 260 is suitable for impulse and heat-sealable films as well as nonwovens. The packaging machine has only been used as a test machine and has a low total operating time of 170 hours.

Condition: ready for operation (used), Year of construction: 1959, functionality: limited functionality, The two-roll precision rolling machine applies a pressure of 26,000 kg and features a roller core diameter of 125 mm as well as a total roller body length of 200 mm. The effective strip width is 175 mm, within which a uniform distribution is ensured. The commission number is 59024, which allows the manufacturer to retrieve the exact construction drawings. Ljdeyzh Tbopfx Akyerk After some time, the machine stops operating. It is suspected that the electrician should take the following into consideration: • Connection type: Three-phase current 380V/400V (3 phases + neutral + earth). • Power socket: Due to the current intensity (22.8 A), a CEE 32A socket (red industrial socket) is required. • Protection: The motor must be protected with slow-blow fuses (e.g., type C circuit breakers or Neozed fuses) to handle the high inrush current. A 32A (three-pole) protection is recommended. • Motor protection: A motor protection switch set to the rated current (here 22.8 A) is absolutely necessary to protect the motor from overload. Important note: The specifications (71.5 rpm, 5 Hz) indicate either a very slow-running special motor or a motor operated via a frequency inverter. Commissioning should only be carried out by a qualified electrician.

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc. Lredpfx Akou A U Uteyek

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1977, Tower crane 32/K/45 Crane with max jib of 30 m Lifting capacity from 1,000 to 4,700 kg Lredpfx Ajyy Rmnskysk Counterweight (concrete) 16,000 kg The slewing motor, hydraulic pump, cylinder seals, hoses, ropes, and contactors have been replaced on the crane. Spare parts list and operating manual available. With remote control.

Condition: good (used), Very high spec bagging machine. Large choice of forming sets including block bottom. Lodpfx Aksywpblsyjrk

Condition: used, Year of construction: 2018, functionality: fully functional, Roll forming machine, trapezoidal sheet roll former for roofing and facade sheets. Manufacturer - CONCEPT STAL Model - T-20 Year of manufacture - 2018 Number of working stands with shafts and rollers - 20 pairs Sheet metal forming/cutting thickness - 0.45–0.6 mm Working width of sheet input - 1250 mm Rotary shears for cutting flat sheet Guillotine for cutting profiled sheet Receiving trolley on wheels Lodpfx Akoww Nynsyjrk Decoiler for sheet coils 5000 kg / 1250 mm with hydraulic expander and inverter - WIEPOFAMA Poznań Line length - 26 m Width - 1.8 m Height - 1.7 m Technical documentation (DTR) - available CE certificate - available Machine connected to power supply, ready for inspection.