Used Max Kettner Gmbh Bottle Packer for sale (81,285)

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. Tsdpezl Shzjfx Ahmjc The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: new, Year of construction: 2025, functionality: fully functional, Pneumatic punching press HPA, 8 to 60 kN, available upon request. Direct-acting punching press with a pressing force of 17 kN. Pressing force 17 kN. Working stroke 40 mm. Overhang 100 mm. Table size W 300 x D 200 mm. Ram bore 20 mm. Weight 41 kg. Two-hand control panel. Two-hand operation: both buttons must be pressed simultaneously with both hands. Complies with the requirements of EN 574, Class IIIB 1. • Ram with anti-rotation feature. • Simple height adjustment of the press head via a threaded spindle and bevel gear. • Side-mounted measuring tape for quick reproduction of settings when changing tools. • Virtually maintenance-free, double-acting cylinder. Tjdpjzn Nqfefx Ahmec

Condition: new, Year of construction: 2025, Features: - Overband Neodymium Magnetic Separator - HP - Dust suppression - Conveyor belt speed control - Self-propelled chassis for semi-trailer Tjdpfx Ajw Elbdohmsc

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2808, total height: 2,400 mm, total length: 3,300 mm, total width: 2,200 mm, feed length X-axis: 450 mm, feed length Y-axis: 250 mm, feed length Z-axis: 350 mm, overall weight: 7,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, CNC grinding center for external, internal, and profile grinding with three linear axes and a swiveling grinding head. Modularly configurable for various grinding tasks, featuring automated dressing cycles, modern control system, tool management, and options for measurement systems as well as peripherals such as coolant treatment and extraction. Tedpfxoxuichj Ahmoc

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) Tjdpfxsxt H Hho Ahmsc > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: new, empty load weight: 9,600 kg, Year of construction: 2026, Gas tank semi-trailer for CO2 Carbon dioxide New gas tank semi-trailer for CO2 Carbon dioxide Manufacturer: CRYOBASE GmbH Volume 23 m3 Working pressure 22 bar Pump Tare weight 9600 kg First registration: year 2026 Todpfxoymza Dj Ahmjc We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Tedpfx Ahezr T Dkjmjc Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. The set includes: - CAB label printer - Feed hopper - Acceleration conveyor - Weighing machine - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Product weight: up to 1 kg (possible calibration) Tjdpfx Ahjy Hiyajmoc Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51N292010-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are suspended by injected air and consequently float downwards. The application areas include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two eccentric motors and a fan with a motor. Nominal width: 1000 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, oscillation amplitude, inclination, speeds, etc. Design: dust-proof Control cabinet: in an IP 55 housing with a frequency converter for motors and fan, included as standard. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in the Netherlands. Tedpfxszkvaxj Ahmec The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: like new (used), TECMA SEALED CUPS DUAL PACKER x2, x4, x6 PACK CARTON YOM 2013 AS NEW CONDITION MADE IN FRANCE Tsdeyrx Uvepfx Ahmsc

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 serial number: 10172/4184 year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm Todpfx Ahjyxgxwomjc

Condition: good (used), functionality: fully functional, Year of construction: 2021, 3 units of driverless transport systems, SAFELOG. AGV M4 – used: Price per unit: €12,500.00 (net)! Manufacturer: SAFELOG GmbH Type: AGV M4 Year of manufacture: 2021 Includes inductive charging station and wireless station Manufacturer data: Forward and reverse travel possible Wear-free charging during the process using an inductive charging system Scalable battery capacity with LiFePo4 batteries to adapt to process requirements Flat design with only 220 mm height – ideal for driving under 7” touch display for easy operation Todpszpf Rwjfx Ahmjc Agent-based control for communication between AGVs and their environment Electric lifting pin for automatic pickup and release of trailers up to 1.5 t Travel speeds from 0.02 m/s to 1.6 m/s Hybrid navigation consisting of magnetic track, contour navigation, camera navigation, and odometry Safety laser scanner in each direction of travel Technical data Designation SAFELOG AGV M4 Article number 106148 Electrical data Operating voltage AGV [V] 24 DC Charging time with inductive charging system (with 1 / 2 / 3 / 4 batteries) [min] 30 / 40 / 60 / 80 * Capacity (with 1 / 2 / 3 / 4 batteries) [Ah] 21 / 42 / 63 / 84 Operation Temperature operating range [°C] 5 - 35 Positioning accuracy [mm] + / - 5 * Min. turning radius [m] 1 Maximum speed (with trailer/without trailer) [m/s] 1.0 * / 1.6 * Continuous operating time without load (with 1 / 2 / 3 / 4 batteries) [h] 4 / 8 / 12 / 16 * Mechanical data Housing material Steel Dimensions (L / W / H) [mm] 1460 / 450 / 220 Weight AGV [kg] 235 Max. payload AGV (top load) [kg] 200 * Max. towing weight (trailer) [kg] 1500 * Condition: good Available: immediately Location: Erfurt area, later warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely robust mechanical design and is ideally suited for production facilities, workshops, or as a perfect base for a modernization project. Technical specifications (according to nameplate): Tjdpfx Ajzni Rxohmoc Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: 08/2000 Electrical connection: 380 V (CEE plug included) Pneumatic connection: 6 bar "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Special drive concept Tsdpfoznkz Sex Ahmec Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Height (mm) = 2680 Weight (kg) = 5700

Condition: new, Year of construction: 2026, machine/vehicle number: K00628, functionality: fully functional, operating hours: 2 h, power: 1.8 kW (2.45 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 300 mm, cutting width (max.): 1,000 mm, control type: manual, actuation type: manual, total height: 2,300 mm, total length: 1,400 mm, total width: 600 mm, Equipment: CE marking, documentation/manual, The BAUER 1000 V is the ideal vertical bandsaw for companies that want to process large workpieces with precision, efficiency, and reliability. With a cutting width of 1,000 mm and a cutting height of 300 mm, it offers ample capacity for demanding applications in steel construction, mechanical engineering, toolmaking, and industrial production. Tsdpfx Aezqdphjhmjc Whether it's contour cutting, straight cutting, or processing large-format components, the BAUER 1000 V combines maximum stability with the highest cutting accuracy and long-lasting quality.

Condition: like new (used), functionality: fully functional, machine/vehicle number: ST 1005-8/2 1/1, Year of construction: 2021, lifting height: 8,000 mm, chain length: 9,000 mm, load capacity: 500 kg, lifting speed: 133 mm/s, fine lifting speed: 33 mm/s, type of input current: three-phase, The overhead crane is in like-new condition and has been used very little. The chain is well-maintained and greased. Manufactured and calculated by Ralf Brinkmann GmbH. Transport within Switzerland and export can be arranged; the buyer bears the costs. Technical data: Load capacity: max. 500 kg Runway type: IPE runway beam Runway length (fixed): 12,000 mm Runway length (movable): approx. 9,595 m of which 4,615 mm (extending from the building) System consisting of: 12.00 m IPE runway beam for attachment to the existing concrete ceiling (2 pieces of 6,000 mm each with connecting elements) - Mounting plate on top - Tsdpfx Ajzn H Twehmjc 9.59 m IPE runway beam, for movement on the "ceiling rail". intended for attachment via the following travel units. Additionally, it has two counter-pressure rollers, at the rear. Eyelet for attaching the hand trolley to be able to retract the telescopic rail, at the rear end of the telescopic rail. 2x hand travel unit for manual movement of the telescopic rail 4x set of end stops (stoppers) designed as bolted angles 2x C-rail system / cable management system for supplying power to the electric chain hoist / electric travel unit (no ideal control!) 1x hand trolley, for retracting the telescopic rail. 1x STAHL Crane Systems electric chain hoist ST 1005-8/2 1/1 Manufactured according to the rules of the EC Machine Directive, Device Safety Act, and BGV. Lifting mechanism operating mode according to DIN EN 13001-2: HD1 Motor classification (FEM/ISO): M4 Load-bearing component classification (FEM/ISO): M5 Protection type EN 60529: IP55 Designed for operation in an indoor environment, ambient temperature -20 to +40°C Lifting mechanism load capacity 500 kg Lifting height 8.00 m Lifting speed 2.00 / 8.00 m/min Power (nominal) 0.20 / 0.80 kW Design data, see product information / motor data sheet Duty cycle 20 / 40 % Load chain galvanized Travel unit electric travel unit, short overall height Travel speed 5.0 / 20.0 m/min Power 0.07 / 0.32 kW Duty cycle 20 / 40 % Flange width 200 mm Electrical system Contactor control Operating voltage 400 V Control voltage 48 V System frequency 50 Hz Control unit STH incl. 6.80 m control cable Paint finish Hoist - Topcoat polyurethane 80 µm Topcoat lifting mechanism in RAL 7021 color, black gray Topcoat control box and fan cover in color RAL 6018, yellow-green Note: Overload protection and emergency lowering by slip clutch (must not be operated under normal conditions) Equipment - Travel switch on both sides - Lifting end switch for upper hook position - Guide for cable-mounted power supply, 505 mm - Radio remote control with emergency control unit STH (transmitter Quadrix, receiver FSE308 with integrated horn (91 dB) and signal light, charger, replacement battery, belt clip, adhesive symbols) Documentation: - Installation declaration according to Directive 2006/42/EC for machinery - Test book - Load capacity labeling according to UVV standards - Operating manual for cranes Currently, the crane is disassembled and stored in a hall in Switzerland, near the German border.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 11H82290, Exercise Book Manufacturing Machine E.C.H. WILL GmbH / Model Alpha RF (manufactured in 2012) For the production of finished exercise books with pre-printed covers Technical Data Mechanical paper web speed/minute: max. 300 m Working strokes/minute – converting section: max. 60 At 4-up production – books/hour: max. 14,400 Reel width: max. 960 mm / min. 580 mm Reel diameter: max. 1,200 mm Printing length (cylinder circumference): max. 670 mm / min. 300 mm Cut-off length – cross cutter: min. 300 mm For exercise book production: max. 500 mm For skid production: max. 670 mm Tjdpfxjzq Av Ts Ahmjc Adjustment steps: 5 mm Number of cuts/minute – cross cutter: max. 1,000 Finished article size range (unbound side x bound side): max. 245 x 480 mm min. 145 x 145 mm Sheet count: min. 5 / max. 50 Article thickness (unfolded): max. 5 mm Main Equipment Reeling Units • 2 x shafted reeling units Ruling Tower • 1 x ruling tower for a maximum of 4 ruling inkers Note: The ruling tower is equipped for either: • 2-color ruling from 1 web, or • 1-color ruling from 2 webs Longitudinal Perforating Unit (for 1 web operation) • 1 x longitudinal perforating unit Cross Cutting Unit • 1 x 1-knife cross cutting system allowing quick and easy knife exchange and adjustment Anti-Static System • Anti-static equipment for paper handling Sheet Overlapping Device • 1 x sheet overlapping device Sheet Counting and Collating Unit • Sheet counting and collating system Cover Feeders (1st / 2nd / 3rd / 4th Cover Feeder) • Will automatic feeder for pre-printed covers Deep Pile Delivery • Deep pile delivery unit, in-line system for collecting large size sheet sections Stitching Unit • Wire size: No. 24–26 • 9 x stitching heads Sectional Folding Unit • 1 x sectional folding unit Square Back Pressing Unit • 1 x square back pressing unit Trimmer • 1 x fore-edge trimming knife • 3 x separating knives • 2 x lateral trimming knives Corner Rounding Device • Corner rounding unit for finished exercise books Book Turning Unit • Book turning station for even stacking Book Stack Discharge • Book stack delivery • Book flipping & title design mixing delivery table (retrofitted) Electrical Equipment • Device for maintaining suitable temperature for electronic components in switch cabinets Pneumatic Equipment • Pneumatic system for machine operation

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm Tedezl U Uwepfx Ahmoc The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb - Counter comb in new condition - Two hoppers - Long discharge conveyor Tsdpfxsw S Iiis Ahmoc - CAT engine C9.3 - Emissions standard EPA Tier 4 final - Only 980 operating hours

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Tsdpfxsznr Sxj Ahmjc Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, We offer a galvanized air receiver – 5000 liters. Manufacturer – OKS Otto Klein GmbH Maximum working pressure – 11 bar Year of manufacture – 2019 Todozt Icqjpfx Ahmsc Dimensions: Diameter – 1400 mm Height – 3570 mm Weight – 1050 kg Air receiver with data plate. Air receiver including fittings – overpressure valve, pressure gauge + flanges. Air receiver, air tank, pressure vessel.

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Tjdpfx Aozt Ip Rehmec Identification No. 950672. Year of manufacture probably around 1995.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Tjdjzpzbfepfx Ahmjc Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Tjdpfozp Iqmox Ahmec Control of a conveyor system Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Areas of application: Training for electronics technicians for automation technology AP2 examination preparation Vocational schools and technical training centers In-house training and further education Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Condition: Very good condition, year of manufacture 2022, fully functional. Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Condition: new, Year of construction: 2026, machine/vehicle number: K00627, functionality: fully functional, operating hours: 2 h, power: 1.8 kW (2.45 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 240 mm, cutting width (max.): 450 mm, control type: manual, pivoting range: 45,060 °, actuation type: manual, total height: 1,300 mm, total length: 2,000 mm, total width: 850 mm, Equipment: CE marking, documentation/manual, The S 320 DG from Sägemaschinenfabrik Bauer GmbH is a powerful double-miter band saw designed for demanding applications in metal construction, mechanical engineering, steel construction, as well as in locksmith shops and manufacturing companies. Thanks to its robust industrial design, high cutting accuracy, and well-thought-out construction, it is ideally suited for economical and precise cutting operations in daily continuous use. Todezqdmmepfx Ahmsc With a generous cutting capacity of Ø 320 mm for round stock or 450 x 230 mm at 90°, the S 320 DG offers high flexibility for a wide range of workpieces and material cross-sections. Miter cuts from 45° to the left to 60° to the right enable versatile applications in the cutting of profiles, pipes, and solid materials.