Used Micromill Challenger Mm430 for sale (284)

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, total length: 8,228 mm, total width: 3,077 mm, total height: 3,375 mm, Year of construction: 2026, Equipment: air conditioning, crane, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments Lsdezydk Rjpfx Aiqohl ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane, PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in difficult terrain ? Can be used on peatlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Gradient capability up to 60% ? Lateral inclination up to 40% ? Wade depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen operating terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing system ? Hydraulic six-stage boom extension Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m Ledpszdl R Tefx Aiqjhl ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pylon construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry special work ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-access terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road capability ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with a PALFINGER PK 23002 SH E Power Link Plus offers maximum off-road capability combined with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 1 kg, Equipment: documentation/manual, type plate available, For sale is a ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research, especially when measuring components in challenging environments. Fast application, easy operation. Condition: Lightly used, primarily for trade shows, exhibitions, and training purposes. Scope of delivery: · T-Scan Hawk 2 Lite · Blue Class 2 laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS calibrated) · Sensor cable · Transport case Lhsdpfx Aiozyp Stjqsl · Incoming inspection at our facility with sphere bars according to ISO 10360 · Acceptance certificate with proof of traceability · ZEISS INSPECT OPTICAL 3D Free · Sensor driver T-SCAN Hawk 2 ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing and processing of polygon meshes · Element construction: regular geometries, points, sections, curves, surfaces, dimensions · CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · Comparison against CAD with colored deviation display · Dimensioning and form/position evaluations according to ISO GPS and ASME Y14.5 · Report module Sensor driver T-SCAN Hawk 2 · Setup and calibration · User-guided calibration · Measurement data acquisition and project management · Configurable workflow assistant

Condition: used, Year of construction: 1999, Used Shrink Wrapper OCME VEGA S 60-2-F 48000 bph The used shrink wrapper OCME VEGA S 60-2-F is a high-performance and reliable packaging solution, ideal for wrapping bottles, cans, or other containers using shrink film. Designed for high-speed production lines, this machine can achieve an impressive output of up to 48,000 bottles per hour (BPH), making it suitable for large-scale production needs while ensuring accuracy and efficiency. Main Features Model: OCME VEGA S 60-2-F Maximum speed: Up to 48,000 bottles per hour Configuration: Operates on 2 tracks to optimize production capacity Supported formats: Various bundle configurations such as 3×2, 4×3, and 6×4, compatible with PET bottles, glass bottles, or cans Packaging material: Shrink film, with or without tray support Lhedpfxevgu Dxe Aiqjl The OCME VEGA S 60-2-F is engineered to support different formats, enabling flexibility in meeting various packaging requirements. With its dual-track setup, the machine maximizes production efficiency, ensuring consistent throughput even during intensive operation. Benefits of the OCME VEGA S 60-2-F High productivity: Thanks to its dual-track design, the machine is tailored to meet the needs of high-demand production environments, such as large beverage or food processing plants. Format versatility: It seamlessly handles multiple packaging configurations, whether you need multipacks for retail or bulk distribution. Energy efficiency: Designed with optimized thermal systems to reduce energy consumption while maintaining fast and reliable shrink wrapping. Robust and reliable: Built with industrial-grade components, the machine ensures long-lasting operation, even in challenging production settings. Easy maintenance: Features accessible components for fast, routine maintenance and minimal downtime, enhancing productivity on the production floor. Applications The OCME VEGA S 60-2-F is versatile and ideal for various applications, including: PET or glass bottles: Suitable for packaging water, soft drinks, beer, and oils. Cans: Designed to handle beverage cans for soft drinks, beer, or food products. Other containers: Handles a wide range of plastic, glass, or composite containers, making it suitable for both food and non-food industries. The ability to switch between different formats and configurations ensures that the machine is ready to adapt to changing production demands. Whether you are packing small retail units or larger multipacks, this machine guarantees flexible operation without sacrificing efficiency. Why Choose a Used OCME VEGA S 60-2-F? Opting for a used shrink wrapper like the OCME VEGA S 60-2-F offers businesses the opportunity to acquire premium packaging equipment at a fraction of the cost of a new machine. Each unit undergoes rigorous inspection, testing, and servicing to ensure full functionality and operational readiness before delivery.

Condition: used, Year of construction: 2004, Used case packer APE INCA 2000 year 2004 The APE Impianti INCA 2000 bottling machine optimizes filling processes in the bottling sector. It provides high performance and adapts to various production needs. APE Impianti manufactured the INCA 2000 model in 2004 with a focus on robustness and reliability. Its full stainless steel construction also ensures corrosion resistance, delivering long-lasting durability in high-demand environments. Lhjdpfx Aevgvdyoiqjl Capacity and Operating Speed of the Case Packer APE INCA 2000 The INCA 2000 operates at a rate of 6000 bottles per hour. It maintains high-speed standards without compromising filling accuracy. This capacity meets the demands of intensive bottling lines, improving production flow. Additionally, it minimizes machine downtime. Companies needing high daily volumes gain a particular advantage from this speed. Container Specifications The APE Impianti INCA 2000 bottling machine works with glass containers. This compatibility ensures both stability and durability during the bottling process. It supports 0.75- and 0.375-liter bottles, adding versatility for different product lines. Its precision meets the beverage sector’s standards, where filling uniformity and container integrity are crucial. Head Configuration and Structure The machine uses 12  heads, which provide stability and consistency. The heads are arranged in two sets of 6 or one set of 12. This flexible configuration optimizes flow based on specific production needs. The modular structure also allows easy maintenance and replacement of heads without reducing productivity. Operational Orientation The operator side is located on the left, making control straightforward during monitoring and adjustment. This layout enables easy access to key components during routine operations and maintenance. The left-side position reduces intervention times and increases operator safety. Construction Material and Durability The INCA 2000’s stainless steel structure provides resistance to corrosion and offers structural stability. This feature also ensures hygienic safety, crucial in the food industry. Stainless steel minimizes the need for extraordinary interventions, which adds maintenance value and longevity. This choice of material meets the mechanical and chemical resistance required for intensive production. Conclusion of the Case Packer APE INCA 2000 The APE Impianti INCA 2000 bottling machine offers both efficiency and durability. It provides a speed of 6000 bottles per hour, compatibility with different glass formats, and a modular head structure. These features meet the challenges of modern bottling lines. Its stainless steel construction and ergonomic layout deliver efficiency, precision, and durability. For companies focused on quality and productivity, this machine is a valuable investment.

Condition: new, mileage: 1 km, power: 180 kW (244.73 HP), fuel type: diesel, tire size: 10.00 R 20, axle configuration: 4x4, wheelbase: 4,160 mm, fuel: diesel, fuel tank capacity: 210 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, Year of construction: 2023, Equipment: air conditioning, - PTO English Mercedes-Benz Atego 1725 A 4x4 Chassis Cab | 245 HP | EURO-3 | STOCK | NEW The Mercedes-Benz Atego 1725 A 4x4 Chassis Cab is for sale and provides a versatile foundation for professional body applications requiring all-wheel-drive capability, compact dimensions and proven Mercedes-Benz commercial vehicle engineering. Powered by a 6.4-litre six-cylinder turbo diesel engine producing 245 HP (180 kW), this Atego combines a robust 4x4 drivetrain with front and rear differential locks, a Mercedes-Benz G 85-6 manual transmission and VG550 transfer case. Reinforced suspension components, mixed-use tyres and a heavy-duty platform chassis make the vehicle suitable for demanding on- and off-road operations. With factory PTO preparation, an extended S-Cab and GSO conformity documentation, this Mercedes-Benz Atego 1725 A 4x4 is a strong base for specialised bodies and worldwide export. QUICK HIGHLIGHTS ✔ Mercedes-Benz Atego 1725 A/42 4x4 ✔ All-Wheel-Drive Chassis Cab ✔ 6.4-Litre 6-Cylinder Turbo Diesel Engine ✔ 245 HP (180 kW) ✔ EURO-3 Emission Standard ✔ Mercedes-Benz G 85-6 Manual Transmission ✔ VG550 Transfer Case ✔ Front Differential Lock ✔ Rear Differential Lock ✔ Reinforced Front & Rear Suspension ✔ Heavy-Duty Platform Chassis ✔ Factory Mercedes-Benz PTO ✔ Extended S-Cab ✔ Air Conditioning ✔ Twin Rear Wheel Configuration ✔ Mixed-Use 10.00 R20 Tyres ✔ 210-Litre Fuel Tank ✔ GSO Conformity Documentation ✔ Suitable for Specialised Body Construction ✔ Available for Worldwide Export Built as a Versatile 4x4 Chassis Cab A specialised vehicle starts with the right chassis. The Mercedes-Benz Atego 1725 A has been configured as a robust 4x4 platform chassis, providing bodybuilders and fleet operators with a flexible foundation for a wide range of professional vehicle applications. Its 4,160 mm wheelbase creates a practical balance between body mounting space and manoeuvrability, while the reinforced chassis and suspension configuration provide the strength required for commercial body installations. Unlike a vehicle already dedicated to one specific application, a chassis cab allows the final configuration to be developed around the exact operational requirements of the customer. 4x4 Drivetrain with Front & Rear Differential Locks Off-road mobility requires more than increased ground clearance. The Atego 1725 A combines four-wheel drive with differential locks on both the front and rear axles, allowing the drivetrain to maintain traction when road conditions become challenging. A Mercedes-Benz VG550 transfer case distributes drive through the 4x4 system, while the G 85-6 manual transmission gives the driver direct control over power delivery. The strengthened rear springs, reinforced front stabiliser and rear stabiliser for extremely high loads further support the chassis when operating with specialised bodies or on difficult terrain. This makes the Atego particularly relevant for construction sites, utility operations, remote project locations and applications where conventional road-going chassis may not provide sufficient mobility. Lhodpfx Aiozpyfpeqjl Proven 245 HP Mercedes-Benz Performance Reliable commercial operations depend on a drivetrain designed for continuous use. The Mercedes-Benz...

Condition: used, Year of construction: 2021, operating hours: 9,564 h, Equipment: all wheel drive, Internal vehicle number: G400207 Ljdpfjzfuq Sex Aiqshl Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Volvo A25G Dumper | Year of Manufacture 2021 | 9,564 Operating Hours We offer a used Volvo A25G dumper, manufactured in 2021. This machine features all-wheel drive and is ideally suited for earthmoving operations, material transport, and use on challenging terrain. Technical Specifications: * Manufacturer/Model: Volvo A25G * Machine Type: Dumper * Year of Manufacture: 2021 * Operating Hours: 9,564 hours * Weight: 22,700 kg * Drive System: All-wheel drive * Vehicle Number: G400207 * Condition: Used * German Machine Inspection possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GmbH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,421 h, load capacity: 4,000 kg, lifting height: 9,300 mm, free lift: 3,250 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 4,250 mm, motor manufacturer: G.M., gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire size: 200/50-10, rear tire size: 27/10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,450 mm, total length: 2,450 mm, total width: 2,250 mm, color: red, Equipment: all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, sideshift, 🔧 Looking for a reliable forklift? We are specialists in the industry! We specialize in the sale of high-quality forklifts, offering thoroughly inspected machines in excellent condition. Check out our offer and find the perfect equipment for your company! 💼 🚜 In this listing we present: COMBILIFT C4000 – TRIPLEX 9300 mm – Year 2017 – GAS – EXTENDABLE FORKS – FREE LIFT – FORK SIDE SHIFT – CONDITION 5/5 This forklift is in excellent technical condition, fully serviced and ready for immediate use. ✅ 📊 Key Features & Technical Data: Model: COMBILIFT C4000 Year of manufacture: 09/2017 Load capacity: 4000 kg Mast type: Triplex Lifting height: 9300 mm Drive type: GAS Load center: 600 mm Engine manufacturer: G.M. Engine power: 74 HP Total weight: 6700 kg Lhsdpfxezzvnds Aiqjl Free lift: 3250 mm Tires: Solid, Superelastic, in good condition Front tires: 200/50-10 – 100% tread Rear tire: 27/10-12 – 100% tread Overall mast height (lowered): 4250 mm Technical condition: Fault-free, after full service 🛠️ Visual condition: Very good Fork length: 1200 mm / 2000 mm when extended Total height: 2450 mm Total length: 2450 mm Total width: 2250 mm Fork positioner width: 1320 mm ⚙️ Equipment: Extendable forks Work lights Adjustable boom Pallet forks Enclosed cabin Freelift Fork side shift This forklift is the perfect solution for industries requiring efficient handling of long loads in narrow spaces, such as wood, steel, or pipe manufacturing. Its multi-directional movement system ensures easy maneuverability and optimal use of warehouse space. 🏗️ 🛡️ Additional Features: Integrated multi-directional control system Comfortable operator cabin High reliability under intensive use Suitable for both indoor and outdoor operations ✅ Condition: Fully operational, regularly serviced, and ready to work immediately. 🚚 We offer delivery throughout Europe and a FREE initial inspection! 💶 Pricing & Financing: We offer complete support with financing, including fast leasing and credit decisions — even for new businesses or companies with a challenging financial history. Invoicing available in EUR or PLN Leasing options, including Start-Up programs We are an authorized supplier for most major leasing companies Leasing decision within 2 hours FAST / SIMPLE / AFFORDABLE FINANCING

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 30 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,800 mm, gearing type: automatic, battery capacity: 270 Ah, battery voltage: 24 V, fork carriage width: 815 mm, fork length: 1,010 mm, fork width: 100 mm, fork thickness: 30 mm, ground clearance: 30 mm, tire condition: 100 %, overall weight: 4,200 kg, empty load weight: 2,700 kg, total height: 2,800 mm, total length: 1,950 mm, total width: 1,512 mm, color: yellow, Equipment: pallet forks, 🔍 Looking for a Reliable Forklift? We Are Industry Experts! Lhsdpjzzvm Tefx Aiqel We specialize in selling high-quality forklifts, offering tested machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! 🚜💼 🔥 In this listing, we present: 🚀 COMBILIFT WR-4 - ELECTRIC ⚡ - DUPLEX 4500mm 📏 - Year 2017 🏷️ - ONLY 30 MTH ⏳ - FREE LIFT 🎯 - CONDITION 5/5 🌟 - LIKE NEW! 🏆 This forklift is in excellent technical condition, ready for immediate use. ⚙️🔧 📌 Key Features and Technical Data: 📍 Model: COMBILIFT WR-4 📍 Year of manufacture: 2017 🏗️ 📍 Lifting capacity: 1500 kg 🏋️‍♂️ 📍 Operating hours: 30 MTH ⏱️ 📍 Mast type: Duplex 🚜 📍 Lifting height: 4500 mm 📏 📍 Drive type: Electric ⚡ 📍 Load center: 600 mm 🎯 📍 Total weight: 2700 kg ⚖️ 📍 Tires: Solid, like new 🛞🔄 📍 Overall height (collapsed mast): 2800 mm 📐 📍 Technical condition: Fault-free, after a service inspection 🛠️ 📍 Visual condition: Very good 👌 📍 Fork length: 1010 mm 🔩 📍 Free lift: 1500 mm 📈 📍 Overall height: 2800 mm 📊 📍 Total length: 1950 mm 📏 📍 Total width: 1290 mm 📐 📍 Positioner width: 815 mm 🔧 🎯 Equipment Included: 🔋 Battery 🦾 Pallet forks This forklift is the perfect solution for industries that require efficient handling of long loads in narrow spaces, such as the wood 🪵, steel 🏗️, or pipe 🏭 industry. Thanks to its multi-directional movement function 🔄, the forklift ensures easy maneuverability and optimal warehouse space utilization 📦🚛. 🚀 Additional Features: ✔ Integrated multi-directional steering system 🔄 ✔ Comfortable operator cabin 🛋️ ✔ High reliability in intensive use 🔝 ✔ Suitable for both outdoor 🌞 and indoor 🏠 warehouse operations 🛠️ Condition: ✅ Fully functional ✅ Regularly serviced ✅ Ready for immediate work! 🚛💨 📦 We offer transport across Europe 🌍 and provide a FREE initial inspection 🆓! 💰 Pricing & Formalities: 💳 We provide full support for financing options, including quick leasing and credit approvals 💰, even for new businesses 🚀 or companies in challenging financial situations. ✔ Leasing decision in just 2 hours! ⏳ ✔ EUR/PLN invoicing available 💶 ✔ Leasing financing & start-up program for new businesses 🚀 ✔ We are an authorized supplier for most leasing companies 🏦 ⚡ FAST / SIMPLE / AFFORDABLE FINANCING 💼

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, type of input current: three-phase, volume flow: 9,000 m³/h, suction capacity: 9,000 m³/h, intake manifold diameter: 300 mm, filter area: 165 m², noise level: 70 dB, total height: 2,500 mm, total length: 1,980 mm, total width: 990 mm, overall weight: 450 kg, space requirement height: 2,500 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, warranty duration: 12 months, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally installable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium volume flows and offers high particle separation efficiency. Main Features: - Multiple filter cartridges arranged horizontally provide a compact and maintenance-friendly design. - Particularly suitable for industrial applications where constant and reliable dust extraction is required. Your Benefits - High filtration efficiency & air quality: The multi-stage filtration effectively retains fine dust particles, contributing to cleaner air and extending the service life of your production equipment. - Compact design: The horizontal layout saves space and simplifies integration into existing systems. - Low maintenance: Easy access to filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 11 kW blower ensures strong suction power and stable extraction performance even in challenging applications. Ljdjxx Ia Hopfx Aiqehl Delivery ex works / ex stock Installation and commissioning (optional): available on request by our trained technical staff. Spare parts (filter cartridges) as well as maintenance contracts can be offered separately to maximize system uptime.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 990 mm, total length: 1,800 mm, input voltage: 400 V, overall weight: 450 kg, warranty duration: 12 months, space requirement height: 2,000 mm, space requirement width: 1,000 mm, space requirement length: 2,000 mm, power: 5.5 kW (7.48 HP), filter area: 120 m², intake manifold diameter: 300 mm, noise level: 70 dB, suction capacity: 6,000 m³/h, volume flow: 6,500 m³/h, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally installable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium airflow volumes and offers high efficiency in particle separation. Key Features: - Multiple filter cartridges in a horizontal configuration for a compact and maintenance-friendly design. - Particularly suitable for industrial applications that require constant and reliable dust extraction. Your Benefits: - High Filtration Efficiency & Air Quality: Thanks to multi-stage filtration, fine dust particles are effectively retained, contributing to clean air and extending the service life of your production equipment. - Compact Design: The horizontal layout saves space and facilitates integration into existing systems. Ljdpfxjxxvpie Aiqehl - Low Maintenance: Easy access to the filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 5.5 kW blower ensures strong suction power and stable extraction performance even in challenging applications. Delivery ex works / from stock Installation and Commissioning (optional): Available upon request by our trained technical team. Spare parts (filter cartridges) as well as maintenance contracts can be offered separately to maximize your system’s uptime.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. Ljdpfxjy Evirs Aiqehl - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: new, Year of construction: 2026, power: 6.99 kW (9.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, Planer Casadei / SCM. Type PS63. NEW annual 2026. Planer width 630mm x height 300mm. Equipped with Tersa- cutter and rubberized challenge roller, which gives a perfect planing result. Electronic setting of planer height and feed speed 5-8-12-18m/min. Planer height setting is done with the push of a button. 9.5hp engine with y/d start. Promotional price: 10.900 euro. We arrange shipping all over Europe Lsdpfszwkukex Aiqehl

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,421 h, load capacity: 4,000 kg, lifting height: 9,300 mm, free lift: 3,250 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 4,250 mm, motor manufacturer: G.M., gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire size: 200/50-10, rear tire size: 27/10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,450 mm, total length: 2,450 mm, total width: 2,250 mm, color: red, Equipment: all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, sideshift, 🔧 Looking for a reliable forklift? We are specialists in the industry! We specialize in the sale of high-quality forklifts, offering thoroughly inspected machines in excellent condition. Check out our offer and find the perfect equipment for your company! 💼 🚜 In this listing we present: COMBILIFT C4000 – TRIPLEX 9300 mm – Year 2017 – GAS – EXTENDABLE FORKS – FREE LIFT – FORK SIDE SHIFT – CONDITION 5/5 This forklift is in excellent technical condition, fully serviced and ready for immediate use. ✅ 📊 Key Features & Technical Data: Model: COMBILIFT C4000 Year of manufacture: 09/2017 Load capacity: 4000 kg Mast type: Triplex Lifting height: 9300 mm Drive type: GAS Load center: 600 mm Engine manufacturer: G.M. Engine power: 74 HP Total weight: 6700 kg Free lift: 3250 mm Tires: Solid, Superelastic, in good condition Front tires: 200/50-10 – 100% tread Rear tire: 27/10-12 – 100% tread Overall mast height (lowered): 4250 mm Technical condition: Fault-free, after full service 🛠️ Visual condition: Very good Fork length: 1200 mm / 2000 mm when extended Total height: 2450 mm Total length: 2450 mm Total width: 2250 mm Fork positioner width: 1320 mm ⚙️ Equipment: Extendable forks Work lights Lhjdpfozzfnyjx Aiqol Adjustable boom Pallet forks Enclosed cabin Freelift Fork side shift This forklift is the perfect solution for industries requiring efficient handling of long loads in narrow spaces, such as wood, steel, or pipe manufacturing. Its multi-directional movement system ensures easy maneuverability and optimal use of warehouse space. 🏗️ 🛡️ Additional Features: Integrated multi-directional control system Comfortable operator cabin High reliability under intensive use Suitable for both indoor and outdoor operations ✅ Condition: Fully operational, regularly serviced, and ready to work immediately. 🚚 We offer delivery throughout Europe and a FREE initial inspection! 💶 Pricing & Financing: We offer complete support with financing, including fast leasing and credit decisions — even for new businesses or companies with a challenging financial history. Invoicing available in EUR or PLN Leasing options, including Start-Up programs We are an authorized supplier for most major leasing companies Leasing decision within 2 hours FAST / SIMPLE / AFFORDABLE FINANCING

Condition: used, Year of construction: 2022, Overview  This automatic bottle unscrambler was manufactured in 2022 by the German company Breitner Abfüllanlagen GmbH. The model BFA 8003 is a high-performance, fully automatic plastic bottle unscrambler designed for gentle handling and fast format changes with minimal change parts. It offers reliable operation even with challenging bottle geometries and lightweight PET containers. The machine is a trade fair model, never used in production, and is therefore in as-new condition. It was only showcased at exhibitions and comes with a 12-month manufacturer warranty. Technical data  - Capacity: Up to 150 bottles/min - Operation: Continuous from bulk hopper feed - Bottle types: Plastic (PET, HDPE, etc.) - Bottle dimensions: Ø up to 80 mm, length up to 100 mm, height up to 300 mm (larger possible upon request) - Bottle orientation: Bottom-first via pneumatic flipping device - Machine direction: Left to right - Working height: 900 mm - Frame: Welded, stainless steel (AISI 304) - Sort drum diameter: 1,500 mm - Control system: B&R industrial computer with 12.5” touchscreen, integrated diagnostics, remote access - Electrical supply: 3 × 400 V, N, PE, 4 kW Lhedpfexqpk Dex Aiqel - Compressed air: 400 Nl/min at 6 bar - Machine guarding: Polycarbonate panels - Safety: Error detection with clear text display - Condition: As new (used for demonstration only) - Warranty: 12 months manufacturer warranty

Condition: as good as new (ex-display), Year of construction: 2025, Semi-automatic under-table crosscut saw, including: - 2 meter roller conveyor to the left of the saw with 1 manual folding stop and 1 pneumatic folding stop - 2 meter roller conveyor to the right of the saw General Technical Data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction connectors: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Standard equipment: Automatic protection and pressure device Ljdpfx Aisw Rcibeqshl Two-hand operation and safety shield Carbide-tipped saw blade SAFE The ergonomically positioned two-hand control and safety guard around the saw blade ensure absolutely safe operation. Safe, protected, and reliable! ROBUST Legend saws are designed and built to work with challenging materials and hard wood even under tough conditions. The frame is made of thick-walled, fully reinforced and coated steel. Robust, compact, and durable. FAST Compared to a pull or radial arm saw, the LEGEND pneumatically guides the saw blade through the workpiece at extremely high speed. This significantly reduces the physical burden on the operator.

Condition: new, functionality: fully functional, Discover ultimate precision with the Trimos V4 height gauge, meticulously manufactured in Switzerland to deliver long-lasting performance in demanding workshop environments. Our commitment to quality spans over 50 years, providing instruments that excel in user-friendliness and production efficiency. Thanks to complete Swiss manufacturing, the V4 guarantees robustness, precision, and enduring reliability—making it ideal for the most challenging shop floor conditions. The user-friendly display unit features easily accessible functions represented by universally understood symbols. Its large, dual-line ‘Black Mask’ display delivers outstanding contrast in any lighting conditions, setting it apart in the market. Building upon the success of the V3, the V4 height gauge extends capabilities with a second probe and an air cushion for effortless movement across the measuring table. The ergonomic handle is equipped with programmable function keys, enabling quick access to frequently used features and ensuring efficient operation for both skilled and untrained personnel. Explore the extensive range of accessories that enhance the adaptability of the Trimos V4 height gauge to your specific measurement requirements. Invest in precision, reliability, and efficiency—choose Trimos for an outstanding metrology experience. Measuring ranges: 400 and 700 mm Exceptionally easy to use Electronically adjustable measuring force Battery life: 20 hours (lithium-ion battery) Standard probe up to 400 mm Comprehensive range of accessories All settings adjustable without tools RS232 and USB interfaces Wireless data transmission (optional) V4 Models: V4 – 400 Measuring range (mm): 407 Application range (mm): 719 Accuracy (µm): 2.5 + L/250 Repeatability (µm): 2 (Ø: 3) Deviation of frontal squareness (µm): 9 Resolution (mm): 0.001 Ledpfow R Ntgjx Aiqshl Measuring force (N): 0.75 ÷ 1.5 Battery life (h): 20 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 21 V4 Models: V4 – 700 Measuring range (mm): 711 Application range (mm): 1023 Accuracy (µm): 2.5 + L/250 Repeatability (µm): 2 (Ø: 3) Deviation of frontal squareness (µm): 13 Resolution (mm): 0.001 Measuring force (N): 0.75 ÷ 1.5 Battery life (h): 20 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 24

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Ledpsr Hr D Nofx Aiqohl Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net Ljdpfx Ajyr Aiwjiqohl 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: new, Year of construction: 2026, warranty duration: 11 months, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Lhedpfx Aijv Iqaxsqol Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: new, Year of construction: 2026, warranty duration: 12 months, Customizable Sawing Machine: The Ideal Solution for Small and Medium Sections Total Optimization, High Precision, and Maximum Speed in One Tool TRV 1200 is the perfect saw for tackling the daily challenges of processing single boards, whether raw or painted. With its advanced technology, this ultra-fast and efficient cutting system allows you to optimize each operation without stress for the operators. Whether for small or medium sections, the TRV 1200 is designed to meet all your needs, with a continuous work cycle that ensures flawless performance. Intelligent Operation and Full Automation With the innovative touch screen, you can easily upload cutting lists directly from the device or remotely, from your office. Once you select the desired optimization, the system autonomously handles all subsequent stages, including: Material introduction (*see Cursal accessories) Automatic advancement and positioning Immediate data transmission to the CNC and optimization Piece evacuation Quality, width, and length selection (*see Cursal accessories) Maximum Speed and Precision Without Compromise With TRV 1200, speed is exceptional: 195 m/min, self-limited by the Brushless servo motor. The synergy of a high-performance optimizer, an indestructible machine structure, and precise table control ensures flawless results. The CNC-driven motorized belts and pneumatic pressure wheels guarantee perfect material positioning. Total Versatility for Every Type of Processing The TRV 1200 perfectly adapts to various applications, from recovery work to defect cleaning, or even more complex tasks that require advanced software processing. It is the ideal partner for optimizing every phase of the process, ensuring maximum results with minimal waste. Advanced and Easy-to-Use Programming Software Over 100 preset cutting plans: customizable widths, quality, and cutting specifications Different optimization options: for commercial value, for scrap, for quantity, for length, and mixed optimization Optimization simulation to ensure the best material management Continuous monitoring of worked quantities Internal optimization within the machine body to simplify the process and save valuable space Lhsdpfx Aiov Ip Uzsqjl Advanced Numerical Control for Efficient Management The heart of the TRV 1200 is the powerful CNC, an industrial computer that ensures continuous production without stoppages. With the HD touch screen, you can easily import data via USB and access simple yet powerful software, quick to learn and easy to use. Moreover, you can rely on online remote assistance for real-time troubleshooting. Discover how TRV 1200 can transform your production: speed, precision, and optimization at your fingertips.

Condition: like new (used), functionality: fully functional, working width: 1,300 mm, grinding width: 1,300 mm, overall weight: 2,240 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, workpiece height (max.): 160 mm, table width: 1,300 mm, workpiece width (max.): 1,300 mm, VIET Challenge 211 B Wide Belt Sander – 2 Heads! LIKE NEW! Professional, Italian wide belt sander – VIET Italia Challenge 211 B calibrator. This machine is equipped with two sanding heads, enabling calibration and precise sanding in a single pass. Lhjdpfx Aezxz E Noiqol Head configuration: - First head – calibrating roller - Second head – hard rubber roller for precise sanding - Pneumatic oscillation and belt tensioning - Air blowing and cleaning system for the belts on both heads - Pressure rollers for processing shorter workpieces The machine is suitable for processing solid wood, laminated boards, MDF, plywood, veneer, and furniture components. Its heavy-duty construction ensures stability, high calibration accuracy, and excellent surface finish. Technical data: - Manufacturer: VIET Italia - Model: Challenge 211 B - Type: Wide belt sander / calibrator - Number of sanding heads: 2 - Maximum working width: 1300 mm - Material thickness range: approximately 3–160 mm - Adjustable feed speed - Control from the operator panel - Pneumatic belt tensioning - Pneumatic belt oscillation - Air blowing of sanding belts - Pressure rollers for short workpieces - Power supply: 400 V - Compressed air requirement: approximately 6 bar - Machine weight: approximately 2240 kg The machine is available immediately. It can be started and inspected before purchase. We offer assistance with loading and can arrange transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior arrangement. You can test the machine on-site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2022, operating hours: 359 h, Radio-controlled tool carrier with grass mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier that can also be used on particularly challenging and hard-to-reach terrains with inclines of up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections, ensuring compatibility with a variety of attachments. Features: * 150 m radio control range * Optimal maneuverability * Ground adherence in all directions up to 55° * Special oil sump for secure engine lubrication * Multifunctional application * High performance, fast completion of work * Excellent traction on any surface Optional equipment: * Hydraulic quick couplings "CEJN" * EU DUAL BAND radio control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator protection * Counterweights, approx. 70 kg * 12 Volt LED beacon with bayonet lock Attachment: Energreen Head 130 with hydraulic quick couplers "CEJN" and hammer flails Robust, reliable mulcher made from Strenx® steel, ideal for cutting grass and shrubs up to 3 cm in diameter. Rotor with hammer flails, adjustable cutting height. Technical data: Working width: 1300 mm Oil pressure: 290 bar Number of tools: 22 Oil flow: 52 l/min Hydraulic motor: 21 cm3 Weight: 220 kg We also have other grass mulchers, forestry mulchers, brush cutters, and a stump grinder in stock. Additional attachments such as double-blade mowers, boom mowers, and many other implements are available on request! We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new machines in stock, as well as additional units for demonstration purposes. Contact us! Lhjdozviypepfx Aiqsl We also rent out all machines with or without operator. Other information: * Trade-in and purchase of vehicles and machinery possible. * Sale price excludes transport. * No liability for printing and typographical errors. * Subject to error, change, and prior sale. * Non-binding offer. * Photos may differ. Price applies to current condition. * All information without guarantee.

Condition: as good as new (ex-display), functionality: fully functional, The Format4 creator 950 in a wide range of equipment variants - your CNC machine for individual woodworking challenges. Efficient CNC processing at a fair price - this principle is at the heart of the creator machine series. All models are attractively equipped with the latest CNC technology and can be customized to meet specific requirements. The creator 950 is not only an easy and safe entry into the CNC world, but also serves to relieve your CNC machining centers. Your advantages at a glance: Concentrated CNC technology on a footprint of just 5 m² All-inclusive: 4-sided formatting as standard Get started right away: Maximum productivity without set-up times No suction cup and console positioning Use from interior fittings to room doors Traditional processing from above - extremely simple loading Intuitive control via control panel Easy to understand software Best suction result High-end at the best price in every configuration Carcass processing with Lamello Clamex-P Additional equipment: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables front+rear - roller table C198 Pick-up space for tool and unit change C200 4-fold linear changer for use of units C233 Holder for crane transport C490 F4design (incl. 3-axis PP) 800 E-Learning F4Design Creator processing field: Travel of the axis X= 1475mm (bracket) Y=1550mm Z= 225 mm Working field Lsdpfx Aiju Eg A Ujqehl X= 3500 mm (infinite) or 130 kg maximum load Y= 950 mm Z= 80 mm Machinable workpiece Equipped with: High-performance PC 24" LED color display Keyboard, mouse and mouse pad 1 USB interface

Condition: new, empty load weight: 104 kg, maximum load weight: 646 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,526 mm, loading space width: 1,116 mm, loading space height: 777 mm, loading space volume: 1.8 m³, tire size: 13, wheelbase: 155 mm, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004173 Low-loader garden trailer 150 with high drawbar and high cover for cars, 150 x 106, 750kg This low-loader with high drawbar and high cover can be connected to any car with a class B driver's license. The low-loader has a tilting drawbar, which makes loading and unloading of goods, especially bulk goods, easier. The compact size of the loading area (150x106 cm) makes maneuvering with the low-loader attached to the hitch a breeze. Larger purchases, new furniture, or household appliances or consumer electronics will no longer be a challenge for you if you have a low-loader. If you buy a low-loader with a high drawbar and high cover from UNITRAILER, you will receive the following: * Fully foldable drawbar to store it on the rear panel in a low garage or under the house * Vehicle with very comfortable loading and unloading of goods, which is made possible by tilting the loading area Lhsdpfxsir H Sbj Aiqol * GVM documents adapted to your vehicle * Simple and problem-free registration process thanks to all the necessary documents - invoice, EC certificate of conformity, vehicle registration document, warranty booklet (2 years warranty) and our certificate * Possible additional equipment - support wheel, additional side panels, anti-theft device * Support from our experts, who are happy to answer any questions you may have. Possibilities of the low-loader Garden Trailer 150: * Storage on the rear panel - the low-loader in a vertical position takes up very little space, and the folded drawbar means that it does not need a high ceiling * High cover with high drawbar 80 cm - protect the load from rain, snow, wind and sun and ensure safety in all seasons * Mudguards made of plastic - very high durability without corrosion * GVM values up to 750 kg - loading area of the low-loader with compact dimensions * Corrosion resistance - made of galvanized sheet steel ensures the long-term corrosion resistance of all metal elements used in the low-loader * Transport independence - you can carry what you want and where you want, without having to rent a car or damage your own car Delivery costs will be charged separately.