Used Mubea Punching Press for sale (12,791)

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Bodju Icw Hepfx Afwodg Punching Press *

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site. Bsdpjzb Iihefx Afwsdg

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load Bdedpfxehlnzkj Afwsg - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm Bodpfjiqhgqox Afwsdg -Weight: 6.6 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, Bdjdpfx Afoiqhguewjg -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg Bdsdoiqhg Uopfx Afwjg

Condition: used, Year of construction: 2001, machine/vehicle number: 008147801, Offer 26176 Bdsdpfx Afozhamdjwjg Technical data: - Dimensional stop with digital display 6000 mm - Jaw feed adjustable by handwheel with clamping function - pneumatic stop clamping - Pneumatic connection 6 bar - Space requirement approx. L 7700 x H 1350 x D 900 mm - Weight approx. 1200 kg

Condition: excellent (used), Year of construction: 2008, Mossini press Drive: Servo Bsdpfx Afezl R Hvjwsdg Pressing force: 2,000 kN Stroke adjustment: 20 - 100 mm Stroke rate: 30 - 90 strokes/min Ram adjustment: 100 mm Tool installation height: 455 mm Year of manufacture: 2008

Condition: used, Hydraulic punching machine, punching frame for use with JOKA HP-S punching units Hydraulic hole punching machine, hydraulic press for punching tools Year of manufacture approx. 1995 Pressure capacity: 5 tons Stroke: 155 mm Bdjdpfx Asltrmusfweg Stroke length: approx. 20 mm Punching unit width: max. 54 mm Punching unit height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Mains connection: 230 volts, 50 Hz - for universal use with JOKA SW 20 or SWD 20 punching units - The outreach of the punching units can be larger and can be pushed back - Stroke activation via electric two-hand operation - Hydraulic unit HAWE, type HCW 4 / 2.5-B 1/400-1 - mounted on a frame base, mobile Space requirement L x W x H: 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Camam Punching Machine Bdodpfezkaquox Afwsg

Condition: used, Year of construction: 1984, Punch power 400 kN table surface area ca. 1250 x 700 mm throat 500 mm hole punching press: capacity (dia. x thick.) 100 x 3 mm Bedovb I Imopfx Afwodg hole punching press: capacity (dia. x thick.) 75 x 4 mm hole punching press: capacity (dia. x thick.) 30 x 10 mm x-travel 700 mm y-travel 470 mm total power requirement 4 kVA weight of the machine ca. 2 t dimensions of machine L x W x H 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK AEM-1080Q is a fully automatic, high-performance die-cutting machine with a stripping station, specifically designed for the precise processing of cardboard, solid board, and corrugated board. It is ideally suited for the production of high-quality packaging with exact die-cut contours and clean removal of the die-cut waste. Thanks to its robust construction, high die-cutting force, and modern automation, the KMK AEM-1080Q offers maximum productivity while maintaining the highest precision. It is the perfect solution for packaging manufacturers who rely on speed, reliability, and first-class quality. ### Highlights * Fully automatic die-cutting machine with integrated stripping station * Die-cutting force up to 350 tons * High production speed of up to 6,500 sheets per hour * Precise die-cutting accuracy of ±0.1 mm * Suitable for cardboard, solid board, and corrugated board * Automatic feeder and delivery system * High production reliability and ease of operation * Robust industrial design for continuous operation * Short setup times and high cost-effectiveness ### Applications The machine is ideally suited for the production of: * Folding cartons * Food packaging * Cosmetic packaging * Pharmaceutical packaging * Shipping packaging * Displays * Packaging made of cardboard and corrugated board * Labels and special packaging ### Technical Data * Maximum paper format: 780 × 1,080 mm * Minimum paper format: 360 × 400 mm * Maximum die-cutting format: 770 × 1,075 mm * Internal dimensions of the die: 790 × 1,100 mm * Die plate format: 780 × 1,080 mm * Minimum gripper margin: 8 mm * Die-cutting accuracy: ±0.1 mm * Maximum die-cutting force: 350 t * Production speed: up to 6,500 sheets/hour * Feeder stack height: 1,550 mm * Delivery stack height: 1,400 mm * Material thickness, cardboard: 0.1 – 2.0 mm * Corrugated board: up to 4 mm * Main motor: 11 kW * Total power: 17.8 kW * Machine weight: approx. 17,600 kg * Machine dimensions (L × W × H): 5,880 × 2,100 × 2,350 mm (plus pre-feeder and operator platform) ### Standard Equipment * Automatic high-stack feeder * Precise die-cutting system * Integrated stripping station * Automatic delivery system * Robust die plate * User-friendly machine control * High-quality safety and monitoring systems ### Included in the Scope of Delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ Machine commissioning on site ✅ Free instruction and training for your operating personnel ✅ Comprehensive after-sales service and technical support, even after installation ### Delivery Time Approx. 6–8 weeks after order receipt ### Machine Type Fully automatic die-cutting machine with integrated stripping station KMK AEM-1080Q Bdsdozg E Sijpfx Afweg

Condition: used, Single-column – Eccentric press PELS - RICHTER, type PEKR 125 Machine no. 20684, year of manufacture 1967 Pressing force: 125 tons Reach: 430 mm Table size: 1100 x 750 mm Bdsdpfx Afsfim Thoweg Ram surface: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 450 mm Arbor hole: Ø 50 mm Stroke rate: 60 strokes/min Table height above floor: 900 mm Motor power: 7.5 kW Power connection: 380 volts, 50 Hz - Overload protection by shear plate in the ram - Compressed air coupling-brake combination DESCH - Ram weight balancing cylinder - Manual ram adjustment - Two-hand operation - Cam indexing mechanism - Central grease lubrication system Vögele - Stroke counter Space requirement L x W x H: 2300 x 1450 x 3030 mm Weight: approx. 10 tons Good condition

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Bdodpfxju S Ny Ts Afwsg Very good condition

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm Bjdsk S Htxepfx Afwodg - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Year of construction: 1994, Technical details: Bdsdpfx Asu Icyhjfwog air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: - for Schüco alloy window frame, post and beam profiles S65 - for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 - for Schüco alloy door profiles Royal S65 door base profiles - foot operation - pneumatic air gun AND - drilling automat for window construction application: - drill automat for door hinge - drill taper: for 8 pcs, usable tools 6 pcs, countersink drills with dia. 11/15mm approx. 80mm long - clamping operation via foot control and drilling via manual - accessories: diverse installation parts i.D. *

Condition: good (used), Hoza EMU punch This machine is ideal for punching out small molded parts from paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged blades or steel rule blades can be used in the machine. Knife stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Color: hammer blow blue Dimensions: 450 x 360 x 600 mm Further items in other sizes - new and used - can be found in our store! International shipping costs on request! Bdodpfx Afeuzhmtswsg

Condition: excellent (used), Year of construction: 2001, HELMERDING Press KDH 400/2600/2 Bdodpfxszlpmzo Afwog Pressing force 4,000 kN Stroke rate 15-60 strokes/min Stroke adjustment 80-250 mm Slide adjustment 175 mm Installation height 550-800 mm Table area 2,500x1,600 mm Slide area 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Weight 106,000 kg Lorenz Strip Line EWH 600/150 Strip width 80-600 mm Strip thickness 0.6-6.0 mm Max. coil weight 7,500 kg

Condition: used, Year of construction: 1992, machine/vehicle number: 9802, pressure:80 t Bdsdpfjh Ra N Rex Afwog no. of strokes:100 - 1000 Hub/min stroke:16-63 mm table surface area:970 x 920 mm hole in the table:740 x 100 mm ram surface:760 x 510 mm distance between table / ram:280 mm compressed air:6 - 10 bar :43 kw weight of the machine ca.:15,5 t dimensions of the machine ca.:232 x 125 x 326 m

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Bdsdpfx Afoul S Easwog Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamping devices Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 22726

Condition: used, Year of construction: 1971, machine/vehicle number: 1967, pressure:30 t no. of strokes:100 - 600 Hub/min stroke adjustable from - to:8 - 40 mm ram adjustment:40 mm inlet width:198 mm mould height - Max./min.:230 - 270 mm roll surface width:110 mm hole in the table:310 x 80 mm distance between columns (le-ri):330 mm distance between columns (vo-hi):280 mm table height over floor:990 mm column diameter:50 mm voltage:380 V frequency:50/60 Hz control voltage:24 V table-size:475 x 450 mm ram diameter:190 mm total power requirement:0,96 - 5,5 kW weight of the machine ca.:2,5 t Bdsdocxxxmopfx Afwog dimensions of the machine ca.:1,2 x 1,16 x 2,15 m

Condition: used, Year of construction: 1995, machine/vehicle number: 1830977, pressure:32 t no. of strokes:30 - 1100 Hub/min sheet width:0 - 120 mm table-size:760 x 580 mm feed::SANKYO V76 stroke adjustable from - to:3-50 mm distance between columns (le-ri):800 mm :200 dayligth:235 mm feed length:0 - 76,2 mm Bdjdpocxxrlsfx Afwjg hole in the table:670 x 110 mm ram adjustment:50 mm surface area of ram:710 x 410 mm plate thickness:0 - 3 mm band speed:max. 70 m/min control:OP 15 SIEMENS SPS Feeding Angle:165 ° total power requirement:18 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,6 x 1,7 x 2,6 m precision machine in 4-column design, Sanyo V76 precision cam feeder, feed direction right to left, with Siemens CNC control OP15, noise reduction cabin, Herion press security valve, central lubrication, emergency cut-off

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Description WEOFFER AN BEAUTIFULL CONDITION REIS PRESS YEAR: 2004 WITH SIEMENS OPERATIONAL PANEL. Description Press force: 1000 KN Press closing speed: 50 mm/s Press opening speed: 50 mm/s Installation height: 1400 mm Maximum table distance: 1700 mm Tables: 1600×1300 mm Allowable weight 12000 kg Bdjdpfxjxu Ddte Afwsg No.1 clamping table Translation 1500 mm speed 200 mm/s Maximum load 6000 kg Nr.1 Tilting table Angle 60° Maximum load 7500 Kg Overall dimensions: 3900 x 2400 x 3045 mm FOR TRANSPORT WILL BE DISASEMBLED -CILINDER AND HYDRAULIC UNIT TO FIT ON MEGA TRAILER 3000mm height is required. Weight: 17000 Kg

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min Bjdpfx Afot Hwz Newodg sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Bdodpfx Afswag Risweg Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany