Used Newmix Atmi Life Sciences for sale (1,430)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: Hjdsw Iqumjpfx Amgen -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence Hjdpfx Asw N S E Aemgsn - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Hjdpfxeyfh Ixj Amgen Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,020 mm, feed length Y-axis: 540 mm, feed length Z-axis: 510 mm, nominal power (apparent): 33 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 3,750 mm, total width: 2,285 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 500 Vertical Machining Centre – 2012 Fanuc i-Series Control | 12,000 RPM | BT40 | Spindle Rebuilt 2024 2012 Doosan DNM 500 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle (rebuilt 2024), 1200×540 mm table, 30-tool ATC, 20 bar TSC & data server. Available now. Manufacturer: Doosan Model: DNM 500 Machine Type: 3 Axis Machining Centre Control: Fanuc i Series Control Year: 2012 Condition: Very Good - spindle rebuilt in 2024 We are pleased to offer this 2012 Doosan DNM 500 Vertical Machining Centre, a robust and highly accurate CNC milling machine designed for precision engineering, subcontract machining, and production environments. Equipped with a Fanuc i-Series CNC control and a 12,000 RPM BT40 spindle, this machine delivers excellent cutting performance across a wide range of materials. The spindle was professionally rebuilt in 2024, ensuring reliability, accuracy, and long-term service life. Key Specifications Manufacturer: Doosan Model: DNM 500 Year: 2012 Control: Fanuc i-Series CNC Axis Travels X Axis: 1020 mm Y Axis: 540 mm Z Axis: 510 mm Table Table Size: 1200 × 540 mm Maximum Table Load: 800 kg Spindle Spindle Speed: 12,000 RPM Spindle Taper: BT40 Spindle Motor Power: 15 kW Spindle Condition: Rebuilt in 2024 Toolchanger Automatic Tool Changer: 30 Tool Stations Machine Dimensions & Weight Overall Length: 3750 mm Overall Width: 2284 mm Hodpfx Amjyfh H Ujgen Overall Height: 2703 mm Machine Weight: 6,500 kg Features & Equipment Fanuc i-Series CNC control 30-station Automatic Tool Changer (ATC) 20 bar Through-Spindle Coolant (TSC) Data server / networking capability Fully enclosed, rigid Doosan construction Ideal footprint for busy workshops Please Note No swarf bin included No tool holders included No vices included Ideal Applications Precision CNC milling Subcontract machining Automotive, aerospace & general engineering Small to medium batch production The Doosan DNM 500 is renowned for its rigidity, accuracy, and reliability, making it a proven and popular choice for machine shops seeking dependable CNC performance. Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2012, operating hours: 75 h, This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Hsdpfx Amjtvz Rfsgsn Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: used, This listing is for a Cole Parmer Masterflex L/S 7554-95 Peristaltic Pump. The unit is in full working condition and is ready for immediate release. This unit is supplied with no pump head. The Cole Parmer MasterFlex L/S 7554-95 is a high-performance peristaltic pump designed for precise and reliable fluid transfer across a range of applications in laboratory, pharmaceutical, and industrial settings. Its versatile design and robust features make it an essential tool for any fluid handling needs. Features: Hodpfx Asxxx U Usmgen - Versatile Applications: Ideal for transferring a wide range of fluids, including delicate biological fluids, viscous materials, and corrosive solutions. - User-Friendly Interface: Easy-to-read digital display and intuitive controls for straightforward operation and adjustment. - Durable Construction: Built for longevity with materials resistant to wear and chemical damage, ensuring reliability in demanding environments. - Quiet Operation: Designed to run quietly, making it suitable for laboratory settings without disrupting workflows. - Safety Features: Includes built-in protection against overload and dry running to extend pump life and ensure safe operation. Key Specifications: - Flow Rate: 0.6 to 3400 mL/min, adjustable based on tubing size - Speed Range: 6 to 600 RPM for precise flow control - Pumping Method: Peristaltic pumping action for gentle and accurate fluid transfer - Reversible Pumping: Supports easy priming, purging, and efficient fluid transfer - Tubing Compatibility: Compatible with a variety of tubing materials and sizes for flexibility Ideal For: - Laboratory fluid transfer, pharmaceutical production, process scaling, and industrial fluid handling.

Condition: used, This listing is for the Cole Parmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features Hsdpfx Aoxuqh Eemgsn New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Flow Rate Range The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications.

Condition: excellent (used), Year of construction: 2004, Technical Specifications – ZS 130 T Gearwheel Shaving Machine Gear Specifications: * Gear diameter: 20 – 145 mm * Tooth width: 40 – 45 mm * Module range: 1.25 – 3.5 Working Area: * Swivel range of the shaving head: -23° to +90° * Taper adjustment (B-axis): +2° / -2° * Horizontal adjustment (X-axis travel): 160 mm * Swivel range of rotary table (E-axis): ±20° * Input resolution for all NC axes: 0.001 mm / degree Slide Travel (Z-Axis): * Travel range (Z-axis): 300 mm * Input resolution: 0.001 mm Shaving Cutter Dimensions: * Outer diameter: 230 – 256 mm * Bore diameter: 63.5 – 100 mm * Shaving cutter width: 50.8 – 0.2 mm Workpiece Parameters: * Outer diameter: 20 – 145 mm * Module: 1.25 – 3.5 * Gear width: up to 40 mm Hodskwc Tfopfx Amgon Rotational Speeds: * Tool spindle speed (infinitely adjustable): up to 600 rpm * Workpiece speed (machining): up to 3000 rpm * Workpiece speed (spin): up to 4500 rpm Feed Rates: * A-axis: up to 3.3 rpm * B-axis: up to 0.5 rpm * C0-axis: up to 60 rpm * X-axis feed: 10 – 10,000 mm/min * Z-axis feed: 10 – 10,000 mm/min Machine Weight: * Approx. 5,600 kg --- Machine Description: The ZS 130 T is a high-performance gearwheel shaving machine designed for the precise finishing of cylindrical gears after hobbing or shaping. Shaving is a crucial process in gear manufacturing, used to correct profile and lead deviations and to improve surface finish, ensuring quiet operation and extended gear life. This machine is capable of processing gears with modules from 1.25 to 3.5 and diameters up to 145 mm. With its CNC-controlled axes and flexible swivel and taper adjustment capabilities, the ZS 130 T allows for a wide range of gear geometries and high production efficiency. The machine is ideal for manufacturers requiring high precision, consistency, and productivity in gear finishing processes. Typical Applications: * Finishing of gears for automotive transmissions and gearboxes * Shaving of helical and spur gears * Volume production in automotive and industrial gear manufacturing * Correction of tooth profile and lead errors before heat treatment The ZS 130 T combines robust construction, high-speed capability, and flexible adjustment options, making it a reliable solution for demanding gear shaving applications.

Year of construction: 2023, operating hours: 25 h, condition: like new (used), Type: GREMAC e2+ Year of manufacture: 2023 Location: Velbert (NRW) Operating hours: approx. 25 h Available from: at short notice, by arrangement Electrically powered drum screening machine for screening excavated soil, earth, stones, construction debris, or other screenable materials. Optional petrol or diesel generator available. With a maximum trailer weight of 3.5 tons, the unit is towable by passenger car. Drive: Electric motors, alternatively via generator (petrol/diesel) Supply voltage: 380 - 420 V / CEE-16A Drum length: 3,000 mm Drum diameter: 1,000 mm Screening area: 9.3 m² Hsdjygk Iwopfx Amgjn Hopper: 1.3 m³ Weight: 3,250 kg - max. 3,500 kg Towing device: Ball coupling, towing eye (40/50 mm) Mesh size: 20 mm² Screening technology Made in Germany. Engineered for longevity. The GREMAC e2+ screening plant impresses with its hot-dip galvanized frame and high-quality materials, ensuring a long service life. Condition: As new Incl. petrol generator MOSA GE 13054 HBS, 3-phase nominal output 12 kVA / 400V Warranty The seller guarantees that the machine is free from defects according to the state of the art for a period of 6 months or 350 operating hours, whichever comes first. Natural wear and tear, or damages caused by improper use, are excluded from warranty.

Year of construction: 2024, condition: like new (used), For sale due to process change: Compact, semi-stationary, electrically driven drum screening machine for screening excavated material, soil, stones, construction debris, or other screenable material! Type: GREMAC eZero Hodpjv Iyx Rsfx Amgen Year of manufacture: 2024 Location: North Rhine-Westphalia Operating hours: approx. 200 hours Available from: Short-term, upon request Drive: Electric motors, alternatively by generator (gasoline/diesel) Supply voltage: 380 - 420 V / CEE-16A Drum length: 2,000 mm Drum diameter: 1,000 mm Screening area: 6.2 m² Bunker: 1.3 m³ Weight: 1,500 kg Mesh size: 20 mm² Screening technology Made in Germany. The GREMAC eZero impresses with its hot-dip galvanized frame and high-quality materials, ensuring a long service life. Machine Condition: - As new - Very well maintained The machine is sold in its original condition at the time of delivery. The seller assumes no liability for defects. Subject to prior sale and technical changes. All information is subject to change without notice.

Condition: used, mileage: 287,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Hsdpfxjzamu Hj Amgsn Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Condition: used, mileage: 49,221 km, power: 125 kW (169.95 HP), first registration: 07/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1253. NU58753 ----EQUIPMENT - Airbag (passenger side) - Exterior mirrors electrically adjustable, heated, and foldable - LED lighting in cargo area - Cargo area floor: vinyl covering - Package: Cargo protection package 1 - Package: Smoker - Tire pressure monitoring system - Side wall paneling up to the roof - 6-speed gearbox - ABS, EBD, and DRIVER ASSISTANCE - Airbag driver's side - Exterior mirrors electrically adjustable and heated - Battery: Extended battery life - On-board computer - High roof - Rear double doors/180° (without windows) - Tachometer - Third brake light - Front power windows - Ford Easy Fuel - High-output alternator - Halogen headlights with daytime running lights - Glovebox with lockable lid - Interior lighting with delay function - Front air conditioning - Fuel tank 70 l Hsdpfx Amezam U Hegon - Paint: Solid paint - Cargo area lighting - Steering wheel: synthetic leather - Adjustable steering column - MyKey key system - Fog lights - Emergency assistance - Package: Technology package 9 - Particulate filter: diesel particulate filter - Radio: audio system, radio and DAB+ - Sliding door entry light automatic - Sliding door: sliding door, right - Rear mud flaps - Side protective strips - Power steering - Seat belts - Seats: Seat package 13 - Start-stop system - Partition (plastic) at B-pillar height - Rear step - Recirculation mode - Lashing eyes - Immobilizer - Heat-insulating, lightly tinted glazing - Central locking with remote control - Overhead storage compartment, front ... and much more. ----The vehicle is not prepared! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to take your vehicle in trade. Financing / leasing is also possible with no down payment! Do you have any questions? We will be pleased to advise you!

Condition: new, The DSB 200 D is a robust tool grinder in the Tool Grinders category by KNUTH, designed for sanding, grinding, and deburring metal parts and tools with precision. This heavy-duty machine features a rigid cast-iron body and a maintenance-free motor, ensuring durability and optimal performance. With a balanced rotor and premium bearings, it operates quietly, providing excellent results while prioritizing safety with an emergency stop switch and a safety observation shield. The DSB 200 D comes standard with a sturdy base and includes two universal corundum wheels, making it ideal for industrial use with a motor rating of 0.9 kW and a speed of 2,950 1/min. This tool grinder is engineered to withstand the rigors of workshop conditions, ensuring long tool life. For those looking for a reliable tool grinder, the DSB 200 D is the perfect choice. Request a quote today to learn more about the Tool Grinders and the unparalleled performance of this product group. Hedewub Hnepfx Amgsn

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 360 mm, spindle bore: 105 mm, turning diameter: 500 mm, center width: 1,500 mm, rotational speed (max.): 1,600 rpm, New conventional lathe DLZ 560x2000 with extensive accessories. Main Technical Data: Max. turning diameter over bed: mm Ø500 Max. turning diameter over cross slide: mm Ø310 Max. turning diameter in gap: mm Ø720 Bed width: mm 405 Max. workpiece length (between centers): mm 1500 Max. turning length: mm 1350 Effective gap length: mm 230 Spindle Spindle nose: D8 Spindle bore: mm Ø80 Spindle taper: M.T. No.7 Metric Ø113 1:20 Spindle speed (steps): 12 speeds Spindle speed range: rpm 36–1600 Further technical details available in the attached document. Main Features: - All-inclusive price with 2-axis position indicator (SINO – General importer in Germany), installed, and powerful 7.5 kW drive - Heavily ribbed machine bed for excellent vibration absorption, even during roughing operations - Extra-wide, induction-hardened and ground guideways for long service life and high precision. Max. workpiece weight up to 500 kg - Electrically interlocked chuck guard - Equipped with adjustable micrometer stop and overload clutch - Hardened and ground gears with oil circulation lubrication for powerful and quiet spindle drive - Precision spindle bearings for high concentricity and accuracy - Clearly arranged, ergonomically designed controls - Single-lever operation for cross feed, longitudinal feed, and rapid traverse for X/Z axes on the carriage - Precise gearshift for speed and feed selection - Finely graduated feed rates and thread pitches - Main spindle gearbox with electromagnetic clutch Hedpfx Amoyak Evjgen - Major electrical components by renowned European manufacturers, e.g. Telemechanique - Comprehensive standard equipment including Multifix tool post, chuck, faceplate, 3-axis digital readout, steady rests and much more - All machines are tested by our service engineers prior to delivery Additional models (also with cycle control) available on request. Contact us today and discover the world of innovative turning technology! Our services for you: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Financing and support with subsidy applications via KFW, BAFA, and more

Condition: new, input voltage: 230 V, type of input current: AC, volume flow: 1.6 m³/h, total height: 20,000 mm, total length: 5,500 mm, total width: 6,600 mm, overall weight: 130 kg, Equipment: type plate available, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Hodpfeq Sttcsx Amgen Weight: 130 kg Manu´facturer: ISI: Industrieprodukte Scope of delivery: 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Condition: new, functionality: fully functional, machine/vehicle number: OVS10NEU, Year of construction: 2025, load capacity: 317 kg, lifting height: 4,600 mm, fuel type: electric, mast type: triplex, construction height: 1,660 mm, empty load weight: 1,350 kg, total length: 1,460 mm, drive type: Elektro, construction width: 800 mm, High-level order picker Chassis number: OVS10NEU Mast type: Triplex Transmission: PMSM Condition: New unit Technical condition: New Front tire type: Polyurethane Front tire condition: New Rear tire type: Polyurethane Rear tire condition: New Battery voltage: 24V Battery capacity: 150Ah Battery type: Lithium-ion Hjdpfsy Upiqox Amgsn Battery year of manufacture: 2025 Battery condition: New Description: - Maintenance-free PMSM drive motors with high efficiency - DC pump and steering units with extended service life and minimal maintenance requirements - Lithium battery: 24V / 150Ah - Maximum platform height: 4,600 mm - Maximum working height: 6,600 mm - Load capacity: 317 kg - 90 kg rear storage compartment - 100 kg front storage compartment - 127 kg operator platform - Drive units with suspension system for improved stability, safety, and comfort - Keyless PIN code panel with RFID card support - Electric lift and lower buttons - High-performance control grips with dual-hand safety operation - LCD display indicating speed, steering mode, operating hours, energy, error codes, etc. - Complies with EU and US regulations - Four different driving modes for various applications - Front-wheel steering for longer distances - Rear-wheel steering for tight and hard-to-reach areas - Lateral (parallel) travel possible - On-the-spot turning (very high maneuverability) possible - Automatic speed adjustment depending on lift height

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR810NEU, total length: 1,415 mm, sweeping width: 810 mm, empty load weight: 465 kg, construction height: 1,120 mm, drive type: Lithium-Ionen, construction width: 890 mm, Scrubber Dryer Chassis Number: NR810NEU Condition: New unit Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 24V Battery Capacity: 200Ah Battery Type: Waterless Battery Year of Manufacture: 2025 Battery Condition: New Description: - Delivers efficient cleaning performance of up to 4,860 m² per hour. - Compact design with a low center of gravity, tight turning radius, and flexible operation. - Integrated waterproof touch panel with LCD display for showing operating parameters and error codes; facilitates parameter adjustment and fault diagnosis. - Three speed settings and adjustable water flow. - Proprietary controller featuring protection against motor overload and low battery, effectively extending the life of both motor and battery. - ECO mode to reduce suction motor power and noise level, ideal for noise-sensitive environments. - Electric one-touch lift function for brush and squeegee holders; squeegee holder is automatically lifted when reversing for safe and efficient operation. Hodpfsy Uph Hsx Amgjn - Dual brush/pad design with innovative quick-connect system for brushes or pads, making them easy to load and unload. - 120-liter fresh and dirty water tank capacity reduces the frequency of filling and emptying. Automatic alarm when clean water tank is empty or dirty water tank is full. - Large opening reversible dirty water tank with tool-free disassembly for easy cleaning and maintenance. - Seat equipped with safety switch, causing the machine to stop automatically when the operator leaves the seat. - Non-slip, durable tyres for reliable traction and optimal grip, even on smooth or wet floors.

Condition: new, functionality: fully functional, machine/vehicle number: Flowpack, Year of construction: 2023, - short delivery time, less than 10 weeks! - Model name: Rotection PU flow-wrapping machine Features: Steel frame/stainless steel construction, Fixing of the unwinder by hand without compressed air, Automatic roller centering for precise application, Automatic stop for empty products (no product - no bag), Simple touchscreen operation via color symbols Continuous feeding of products via sensor control, pressure mark sensor included, safety covers 3-sided welded seam packaging (fin seam), longitudinal sealing on the underside of the bag, rotating transverse sealing system Can be combined with upstream and downstream machines, Customer-specific modifications / designs on request Additional options (on request and at extra cost): Thermal transfer printer, e.g. best-before date, print width up to 60 mm, stainless steel finish/lacquering, cooling applications for ice cream packaging, zig-zag knife, Euro hole punch etc., applications for shrink films (flow shrink), gas flushing units for protective atmosphere (extend product shelf life), automatic product feed systems, intermittent insertion systems, perforation units (tear strip) for easy opening, length-dependent product processing by photocell scanning Horizontal production orientation Conveyor system either chain conveyor or belt conveyor, length as required Film feed from below Flexible and fixed forming shoulder Operator display 10" touchscreen with memory functions, swivel arm for convenient operator handling Drives & control 8 servo motors and PLC control Packaging length 120-600 mm Packaging width 70-250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25-100 bags/min Film width 200-600 mm Consumption approx. 7 KW Power supply 220-240 V / 50 Hz / 1-phase Machine weight approx. 1000 kg Hedpfxoq Ikfms Amgsn Machine dimensions approx. 5230 x 1380 x 1460 mm System material 304 stainless steel Pressure mark sensor Yes External compressed air required Yes Printer holder at extra charge Delivery time Current delivery time less than 10 weeks

Condition: new, functionality: fully functional, mileage: 30 km, power: 140 kW (190.35 HP), fuel type: diesel, number of seats: 21, gearing type: automatic, overall weight: 5,700 kg, empty load weight: 4,100 kg, fuel tank capacity: 93 l, emission class: euro6, color: black, wheelbase: 4,325 mm, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, spoiler, summer tires, traction control, trailer coupling, MB Sprinter 519 Bluetec - BusConcept Premium - Seats: 19+1+1 - (COC / 2007/46 for 5.7t) ABS, ASR, ESP, EBV, BAS Driver airbag Power steering Central locking Immobilizer Key with remote control Active service system "Assist" Electric windows and side mirrors (heated) AGM 12V 95 Ah battery + second AGM battery Additional pulley for second compressor (roof air conditioning) Factory-installed automatic air conditioning (4.5 kW, independent of the roof air conditioning) Fuel tank 93 liters Cruise control Additional water heating at the factory Additional battery Multifunction steering wheel with adjustment 5-inch color screen for the driver 10.25 MBux radio multimedia system LED lighting (front and rear) Additional PTC engine heater (positive temperature coefficient) Hedpfx Aowm Ev Demgjn Equipment package (reinforced front and rear suspension, Long-life battery, reinforced shock absorbers, reinforced front axle) Set of summer tires 205/75 / R16C (reinforced) Spare wheel Lane keeping assist Active brake assist Hill start assist Crosswind assist JA7 – Blind spot assist BA3 – Active brake assist RY2 – Tire pressure monitoring Speed limiter (up to 100 km/h) Digital tachograph (legalized) Suspended driver's seat, adjustable, with armrest First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), wedge SEGE passenger seats with full adjustment (backrest adjustment and two-part side extensions) Seats have: armrests, 3-point seatbelts, newspaper nets, handles, contoured headrests Seats made of artificial leather and perforated artificial leather, black with colored details, produced by Intap 19 + 1 +1 seating configuration Platforms over the entire length of the vehicle Partition/wall behind the last seat row Windows – double, tinted, FLOCK Curtains on rails – black Four convectors running the full length of the passenger compartment (approx. 3 m) Convectors heating the passenger compartment, controlled via potentiometer, product VEHTEC WEBASTO roof air conditioning 10.5 kW, controllable via climatronic panel, with individual distribution to each passenger via X-Line panels White LED at the entry step Ncjbn I Dsibu U Iog H Dst White LED ceiling lighting White LED lighting in the passenger compartment LED platform lighting - orange Contour LEDs Luggage compartment LED lighting white Audio/video kit: an additional DVD player LCD monitor, roof-mounted at the pilot seat height Microphone on cable Speakers in the passenger compartment Rearview camera Recessed hull Luggage racks on both sides of the passenger compartment Non-slip, waterproof PVC floor Safety hammers - 3 units Sliding roof with end cap, allows emergency exit Belt fastening marking (sticker) Ergonomic handle at the vehicle entrance Interior upholstery made of eco-leather and soft material – easy to clean Interior thermal insulation Electric door – panorama – heated Delivery, leasing, or financing possible. Immediately available. Contact us: Irenäus Wardenga also WhatsApp Auto-Wardenga

Condition: used, Plasma Cutting & Grooving with Hand Torch, from 3 to 45 mm Simple and cost-effective technology for any cutting application Hjdpfx Amey U Urkogjn The PA-S45 W plasma cutting system is suitable for manual and mechanized cutting in the material thickness range of 3 to 45 mm. By using different plasma gases and gas mixtures, electrically conductive materials can be cut and grooved cleanly. As a mobile system, it can be used in workshops, training centers, and on construction sites. Advantages: Optional use of hand or machine torch Suitable for 2D & 3D guidance systems Robust and simple design Mobile systems for flexible use Reliability even under difficult production conditions Cutting current can be pre-selected in three stages Effective cooling of the plasma torch and its wear parts Quick changeover from cutting to plasma grooving and vice versa Angled torch heads and special shank designs for optimized cutting of 3D parts Wide range of applications thanks to optional equipment Liquid-cooled plasma torches The proven design of the torch components, cathode, and nozzle, is a prerequisite for the quality of the cut surfaces. The liquid cooling of the plasma fine-jet torches guarantees their long service life. Plasma cutting with the systems in the PA-S series is therefore efficient and increases the user's productivity. When cutting construction steel with the PA-S45 W, a swirl gas torch often allows for more frequent piercing. Plasma Grooving Both machine and hand torches can be quickly converted for plasma grooving. This requires changing the nozzles and attaching the ceramic cap (if necessary, with a protector). By using different plasma gases and gas mixtures, all electrically conductive materials such as construction steel, stainless steel, aluminum, and brass can be processed. Plasma grooving is ideally suited for removing welding defects, cracks, porosity, and inclusions, as well as for preparing for counter-welding. Advantages: No carbonization of the material No post-grinding required Low heat input Good observation of the process Reduction of noise levels and smoke generation

Condition: new, overall weight: 31,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 7,100 mm, Year of construction: 2026, Equipment: ABS, Technical Information: Weights • Perm. gross vehicle weight: 31,000 kg • Perm. axle load: 20,000 kg (technical 20,000 kg) • Fifth wheel load: 11,000 kg • Unladen weight approx.: 6,800 kg (+/- 5% according to DIN 70020) (depending on equipment) Dimensions • Saddle height approx.: 1,150 mm • Overall width approx.: 2,500 mm • Overall length approx.: 7,100 mm • Roller height (device) approx.: 1,500 mm • Our vehicles are designed and manufactured to meet the highest demands in transport, waste management/landfill, and agricultural applications. • Thanks to many years of experience, we guarantee you a robust vehicle with long service life. Steel Frame • Frame construction in welded steel design, made of longitudinal and cross members using high-quality steel with mounting brackets for the installation of the hooklift system • 2'' kingpin, bolted and replaceable, 2 positions Axles/Suspension • Low-maintenance SAF axles, 2 x 10,000 kg, disc brakes • Incl. air suspension with lifting and lowering device • Axle spacing: 1820 mm Lift Axle • 1st axle as lift axle with dual-side lift Braking System • Load-dependent dual-line air brake system in accordance with directive EC 71/320 (WABCO), automatic load-sensing brake regulator Hedpswxi Ihsfx Amgsn • EBS electronic braking system • Smart Board • Parking brake as spring-loaded type • Automatic lowering during hydraulic operation • Supply via Duomatic coupling Tyres • 4 x 425/65 R 22.5 tyres mounted on 10-hole steel rims, offset 120 Support Legs • 10 t gearbox support winches with single-side operation, variable speeds Body • Hooklift system, telescopic design • Hook height: 1,570 mm • Roller height approx.: 1,500 mm • Container external length approx.: 5,000 mm – 7,000 mm • Lifting/tilting capacity: 25,000 kg • Tipping angle: 50 degrees • Data and dimensions according to DIN 30722 • Working pressure: max. 350 bar

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm Hodpfovxkv Ujx Amgsn - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, Hedpfsu T Hrpsx Amgon usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: new, Year of construction: 2026, power: 80 kW (108.77 HP), temperature: 230 °C, inner dimension length: 3,200 mm, inner dimension width: 1,400 mm, inner dimension height: 2,370 mm, total length: 3,960 mm, total width: 1,880 mm, total height: 3,370 mm, control type: PLC-controlled, Equipment: CE marking, Powder coating Oven (Oil/Gas) Internal dimensions LxWxH: 3200 x 1400 x 2370 mm External dimensions LxWxH: 3960 x 1880 x 3370 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 80 kW (1 burner) Maximum working temperature: 230C; Heat resistant recirculating fans: 1 x 1,1 kW 10""Touch screen“ control Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Two wing doors on one side Ready for 4 rails (rails not included) Key features: Solid construction Hjdpsy Uxrnsfx Amgjn Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Stores multiply curing recipes Integrated safety features HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality Delivery in 2 weeks after payment WARRANTY: 12 month We can organise delivery accross the EU for speacial price. PRICES are EXCLUDING VAT. WE ARE LOOKING FOR SALES PARTNERS

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: V 453572, functionality: fully functional, operating hours: 1,770 h, power: 6 kW (8.16 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: AC, spindle diameter: 30 mm, pivoting range: 90 °, rip fence adjustment: motor-driven, actuation type: electric, rotational speed (max.): 9,000 rpm, rotational speed (min.): 3,000 rpm, table width: 900 mm, table length: 2,405 mm, total length: 3,000 mm, total width: 1,260 mm, total height: 1,800 mm, overall weight: 1,300 kg, year of last overhaul: 2026, Equipment: CE marking, Martin T26 DuoControl Spindle Milling Machine 5/6 kW (6.8/8.2 hp) - 400 V, 50 Hz with neutral conductor in CE configuration with 2-axis control for spindle height and milling fence, electromechanical swivel adjustment with digital display, incl. swiveling control panel with safety device type CPS Gamma V *with milling arbor 40 mm / 160 mm length //Table size: 2405 mm x 900 mm //Table height: 900 mm //Table openings: electric 70 mm - 220 mm //Weight: 1300 kg //Speeds: 3000/4500/6000/9000 rpm with belt quick-change system //Displays: electric speed display Digital (LED) for spindle height (absolute and relative) and swivel angle automatic display of the correction value for the milling depth Dual operating hour counter for total and batch run time //Milling spindle: electrically swiveling via push button +/- 45.50° electrically adjustable in height with rapid and creep feed, with steep taper SK 40, Dornfix quick-change system incl. torque wrench wear-free, electrically braked Electro-pneumatic locking via selector switch //Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm //Milling fence: Aigner integral fence Milling jaws made of aluminum, hard-coated, with mounts for groove board or guide strip Handwheel adjustment with mechanical digital counter Infeed jaw adjustable separately Maximum WZ diameter 250 mm //Extraction: Extraction port 120 mm diameter on the milling fence Extraction port 120 mm diameter under the table //Maintenance equipment Central lubrication via pump Lubrication of the milling spindle via grease volume regulator 1 x open-end wrench 1 x torque wrench for Dornfix system 1 x oil pump 1 x grease pump filled with long-life grease 1 x ball bearing for guide ring 62 mm 1 x arc milling guard FRS95 for milling operations on the guide ring, with extraction port and feed strip //Electrical equipment: Lockable main switch, automatic star-delta start, electric brake wear-free Contact for controlling the extraction, undervoltage protection, CEE torque connection for feed unit (= 5-pin socket) Operating push button for direction of rotation selection, motor circuit breaker and winding protection BG test certificate No. 991002 GS wood dust tested No. 991001 EC type-tested No. 991003 Hjdpfx Aozamwuomgjn Additionally: 1 x Electrically adjustable table opening 1 x Support for feed unit mount, swiveling with motorized height adjustment with control panel 1 x extendable table extension