Used Okuma Lb 3000 Exii for sale (7,357)

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 01224, turning diameter over cross slide: 520 mm, turning length: 750 mm, turning diameter: 380 mm, spindle bore: 60 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 20 rpm, overall weight: 5,000 kg, bar diameter (max.): 60 mm, Equipment: documentation/manual, rotational speed infinitely variable, CNC control Fanuc 10 TF Turning diameter: 380 mm Swing over bed: 520 mm Turning length: 750 mm Dodpfxjy Irfze Ad Nocg Turret: 12 stations Spindle speeds: 20 - 3500 rpm Chuck incl. hard and soft jaws Tailstock Including various toolholders Monitor new: flat screen Year of manufacture: 1987 Machine under power. Data sheet, documentation and manuals available Data transfer possible with laptop.

Condition: good (used), Technical data for the shelving rack: Racking system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 piece Shelf row length: 3,290 mm Number of bays per shelf row: 02 pcs Included in delivery: 03x upright frames for shelving racks, used Material finish: sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pcs.: approx. 8.92 kg Including cross bracing and footplates (Uprights are pre-assembled) 2,490 mm high 600 mm deep 12x shelf panels, used Material finish: sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / pcs.: approx. 8.12 kg Max. load per shelf: 75 kg with evenly distributed load. 48x shelf supports, used Suitable for smooth uprights Material finish: sendzimir galvanized 01x cross brace, used Dcjdpfjy Hpn Rjx Ad Nsg Type designation: KV31313 Weight / pcs.: approx. 0.405 kg / pcs. Material finish: sendzimir galvanized 01x load capacity sign with field and shelf load data, manufacturer and order number Dimensions: 297 x 210 x 2 mm Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transport or shipping of this item is subject to additional costs, which can be provided separately based on the delivery location and scope. Please contact us for individual transport quotations.

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Dcsdpey Drunsfx Ad Neg Okuma OSP 7000L Control

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Dcsdpfx Aex Tuyxed Nog

Condition: good (used), Technical Data for Shelf Rack System: Dcjdoy E S Htopfx Ad Nsg Racking System: SSI Schäfer Type: R 3000 Technical Data for Installation: Number of rack rows: 01 pc. Rack length: 4,920 mm Number of bays per rack row: 03 pcs. Scope of delivery includes: 04x shelf rack upright frames, used Material finish: sendzimir galvanized Version: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimension: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Including cross beam and base plates (upright frames are pre-assembled) 2,490 mm high 600 mm deep 18x shelves, used Material finish: sendzimir galvanized for frame depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / piece: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 72x shelf supports, used Suitable for plain uprights Material finish: sendzimir galvanized 01x cross brace, used Type designation: KV31313 Weight / piece: approx. 0.405 kg / pc. Material finish: sendzimir galvanized 01x load sign Including information on bay and shelf load, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Any additional shipping or transportation of this item is subject to extra costs, which can be provided upon request depending on the delivery location and/or scope of delivery.

Condition: good (used), Technical data for shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for configuration: Number of shelving rows: 01 unit Shelving length: 6,560 mm Number of bays per row: 04 units Djdpfx Adsy E N Nxj Nscg Scope of delivery includes: 05x upright frames, used Material finish: sendzimir galvanized Design: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / unit: approx. 8.92 kg Including bracing and base plates (uprights are pre-assembled) 2,490 mm high 600 mm deep 24x shelves, used Material finish: sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 594 mm Height: approx. 30 mm Weight / unit: approx. 8.12 kg Maximum load per shelf 75 kg, with evenly distributed load. 96x shelf supports, used Suitable for smooth upright frames Material finish: sendzimir galvanized 02x cross braces, used Type designation: KV31313 Weight / unit: approx. 0.405 kg Material finish: sendzimir galvanized 01x load capacity sign with information on bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. If transport or shipping is required, this will incur additional costs, which can be requested separately depending on the delivery location and scope.

Condition: good (used), Technical Data for the Shelf Rack System: Rack System: SSI Schäfer Type: R 3000 Technical Data for Installation: Number of rack rows: 01 pc. Rack row length: 8,190 mm Number of bays per rack row: 05 pcs. Scope of delivery includes: 06x shelf rack uprights, used Material finish: sendzimir galvanized Version: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Including gusset brace and base plates (Rack uprights are pre-assembled) 2,490 mm high 600 mm deep 30x shelf panels, used Material finish: sendzimir galvanized for upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Dcjdpfxsy E Hm Us Ad Neg Weight / pc.: approx. 8.12 kg Max. load per shelf panel: 75 kg, with evenly distributed load. 120x shelf supports, used suitable for smooth uprights Material finish: sendzimir galvanized 02x cross braces, used Type designation: KV31313 Weight / pc.: approx. 0.405 kg/pc. Material finish: sendzimir galvanized 01x load capacity sign with specifications for bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be individually requested from us depending on the place of delivery and scope of supply.

Condition: good (used), Technical data for the shelf panel: Racking system: SSI Schäfer Type: R 3000 Dcodpfsy Ex Rlex Ad Njg Included in the scope of delivery: Shelf panels, used Material color: sendzimir galvanized Total width: approx. 994 mm Total depth: approx. 594 mm For frame depth: approx. 600 mm Height: approx. 30 mm Weight per unit: approx. 5.16 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Delivery or shipping of this item is possible at extra cost, which can be specified upon request depending on the place of delivery or delivery scope.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC Turning and Milling Center Okuma Multus B300II-W Control: OSP-P 300SA Year of manufacture: 2022 Djdpfey Ewy Ssx Ad Nocg Internal machine no. 55 X-axis: 580 mm Y-axis travel: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° increments W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40 positions Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. 20 bar pump - Preparation for in-process measurement - Tool height adjustment in Y-axis for turning tools - Hi-Cut Pro high speed control

Condition: good (used), Technical data for the shelf rack: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelving rows: 01 pc Shelf length: 47,330 mm Number of bays per shelving row: 29 pcs Scope of delivery: 30x shelf upright frames, used Material finish: sendzimir galvanized Design: slotted Adjustment grid: 26.5 | 26.5 mm Dcsdpfey Enpqex Ad Nsg Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Incl. cross braces and base plates (upright frames are pre-assembled) 2,490 mm high 600 mm deep 174x shelves, used Material finish: sendzimir galvanized for upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / pc.: approx. 8.12 kg Max. load per shelf 75 kg, with evenly distributed load. 696x shelf supports, used Suitable for smooth uprights Material finish: sendzimir galvanized 10x cross bracing, used Type designation: KV31313 Weight / pc.: approx. 0.405 kg Material finish: sendzimir galvanized 01x load sign with information on bay and shelf loading, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: excellent (used), OSP P200M Control Working travels 1000 x 1000 x 900 mm Tool changer with 200 Positions Spindle speeds 50- 12'000 rpm Spindle taper SK50 6 paletts 630 x 360 mm B-axis Table 360 ° Cooling through spindle Tool breakage control Clamping cubics 3D measuring taper Chip conveyor Misc. accessories Dcsdpfx Aey Hqv Nsd Neg MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine Dedpfx Adjyvfhde Nocg - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Dcjdjh D Anajpfx Ad Neg

Condition: good (used), Year of construction: 2004, Opportunity to buy a 5 axis OKUMA machining center with EROWA automation. Including: EROWA Robot Easy automatic loading cell Chip conveyor Heavier coolant pump Higher Spindle speed Dcodpfx Ajyfht Ued Neg Automatic measurement system for tool length, diameter setting, and tool breakage detection with a Renishaw laser Automatic measurement function, Renishaw MP10, BT40 Full technical specifications in the attached document. This machine is in very good condition and can be inspected under power upon appointment. Availability: 03/2026 CNC control Okuma OSP-E100M X-axis 762 mm Y axis 460mm Z axis 460mm C axis 360° Table size 400 mm Table load 300 kg Spindle mounting BT40 Big plus spindle Tool changer capacity 32 positions Spindle speed 50-15,000 rpm Spindle hours approx 42000h Cutting hours approx. 38000h Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned Dcsdpsyt Nvtofx Ad Nsg - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Dcjdex D S Ekepfx Ad Njg Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 22 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1250 / 660 / 540 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 32 [mm/min] Dcsdpfsy Er Hysx Ad Njg - Cutting feed rates (X/Y/Z) : 32 [m/min] A ROTARY AXIS - Travel : [°] - C ROTARY AXIS - Speed : 1000 [rpm] - Travel : 360 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 48 TABLE - Maximum workpiece diameter : 730 x 500 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 127 - 660 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.940 x 3.367 [mm] - Machine height : 3.541 [mm] - Machine weight : 13.000 [kg] MACHINE HOURS - Number of hours under power : 57.114 [h] - Number of working hours : 23.087 [h] EQUIPMENT - CNC : OSP-P200M - Turning option - Coolant tank * with paper filtering unit - Coolant through spindle - Chips conveyor - Oil mist extractor : LOSMA - Spindle cooling unit - Tool probe : RENISHAW TS27R - Workpiece probe : RENISHAW OMP60

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Dcjdsy Ed Ayjpfx Ad Neg Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: good (used), Year of construction: 2015, FOR SALE: OKUMA MILLAC 852VII Vertical Machining Center (2015) Description: High-performance OKUMA CNC vertical machining center for sale, model MILLAC 852VII. Japanese-designed machine, renowned for its exceptional rigidity and surgical precision. Ideally suited for machining complex and heavy prismatic workpieces. Dcedpfoyr Id Hex Ad Neg Technical Specifications (Source: Manufacturer’s Plate): - Brand: OKUMA Corporation (Made in Japan) - Model: MILLAC 852VII - Year of manufacture: March 2015 (2015.03) - Power supply: 380 V / 3 phase / 50 Hz - Rated power: 44.3 kVA (High-power spindle motor) - Compliance: CE Marked (Certified for the European market) Working Capacities (Standard for model 852VII): - Travels (X / Y / Z): 2,050 mm x 850 mm x 750 mm (Very large capacity) - Table dimensions: 2,200 mm x 850 mm - Maximum table load: 3,000 kg - Spindle speed: Up to 6,000 or 10,000 rpm (depending on configuration) - Spindle taper: BT 50 (High rigidity) - Automatic Tool Changer (ATC): 36 positions (or more, depending on configuration) - Machine weight: approx. 17,500 kg (Ultra-heavy-duty frame) Key features: - Recent machine (2015), still complies with current technology standards - Robust box ways for perfect surface finishes

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13/15, Equipment: documentation/manual, DRYER FOR FRESH PASTA, FRUIT, NUTS ESC100 Dryer that allows the wrapping, pre-dressing and drying of short, long and stuffed pasta, as well as the drying of pasteurized pastes before a possible packaging. Capacity for drying cycle: 100 kg approx Panels injected with hot injected polyurethane foam, with high thermal stability, in white pre-painted sheet Electric heaters for air heating (1,2 Kw x 3 = 3,6 Kw) 500 mm axial fan for forced air circulation (1 Kw approx.) Electrical panel with PLC board for setting and checking drying phases N ° 2 Butterfly valves controlled by Belimo electric actuator Probe for internal humidity control Dcsdpfjtrd N Ejx Ad Neg Instrumentation for checking drying and temperature times controlled by an EC-compliant electrical panel with programmable digital electronic card N ° 25 frames in fir wood 600 x 1200 mm, with polyester mesh and aluminum sealing bars N ° 1 Stainless steel trolley on wheels Technical data Voltage: 400 V – Three-phase Total power: about 5 Kw Dimensions Depth: 1000 mm (+ 300 mm above the door) Width: 1670 mm Height: 2260 mm (+ 400 mm humidity extractors)

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 1,670 mm, travel distance Y-axis: 505 mm, travel distance Z-axis: 190 mm, total height: 2,950 mm, total width: 2,960 mm, overall weight: 13,700 kg, product length (max.): 5,110 mm, number of axes: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, Helical Interpolation • Distance between centers: 1500 mm • Max swing diameter over covers: 550 mm • Max turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" Big Bore • Sub-spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with motorized tools • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 divisions • Coolant/pump pressure: 15 bar • Working hours (as provided): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 Dodoy Ddiwspfx Ad Necg • 9497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min Dcsdpoy Dc Nisfx Ad Nsg • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment Dcedpfx Aoxxifkod Neg # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven Dodpfxsxxh Udo Ad Nscg - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: MW130, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis positioning accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Counter-Spindle: - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis positioning accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-station lower turret, all positions driven - Maximum milling speed: 4,500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V, 3-phase, fuse: 151 A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm - Weight: 5,500 kg Main Features and Capabilities: - Horizontal construction: Optimal chip evacuation, parts catcher + custom parts conveyor belt Dcodpfxjxxrbbe Ad Nsg - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q SETTER) - Broken tool detection system: Load monitoring auto-learning analyzer controlled by OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and as a hard copy Machine status: Operative only with main spindle – sub spindle requires repair Optional Equipment - Bar feeder: TopAutomazione model FU352 - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm - Weight: 1,500 kg