Used Potentiometer for sale (202)

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 170 mm 2 units: 1) metal grooved roller for calibration 2) grooved rubber roller + shoe + metal roller – from above: - slip rubber roller - unit (two units on one motor) 15 kW - slip rubber roller - take-off rubber roller - tape blowing – from below: - 2 slip metal rollers - conveyor belt - 2 slip rubber rollers - pneumatic tape oscillation - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 feed speed types - working pressure 6-8 bar - dust extraction nozzle diameter 2x140 mm - overall dimensions L/W/H 1830x1670x1950 mm - weight 1160 kg ADVANTAGES - Made in Italy - 2 grinding units - Unpainted - Used sander, in perfect condition Bdsdpfx Afozruttowog Net price: 72900 PLN Net price: 17357 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Bdjdpex R Uw Ssfx Afwsg Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions - Coolant gun, including high-pressure pump - Work area lighting (LED) - Cooling system - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button - Handwheel Bsdpfxevvwble Afwjdg - Remote support on machine – allows remote diagnostics

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Distance between centers: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg cantilevered, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, stepless speed control 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill travel 45 mm Quill force: 200-600 N manual, (up to 2500 N possible, adjustable = Option) Table inclination: 10 degrees Travel of the infeed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor external: 4 kW / (5.5 kW = Option) Stepless speed adjustment of the grinding wheel with potentiometer Grinding spindle motor internal: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor 1.5 kW Lubrication motor 0.1 kW Bedpfxeh Rimmj Afwjdg Hydraulic tank 80 liters Machine weight: Net 3800 kg Infeed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle head for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, infeed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, infeed stop, incremental infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with steplessly adjustable drive with a rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, infeed increments, feeds, dwell times, clearance strokes, compatible with the old Karstens infeed control, with a color Siemens touch panel similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: used, Year of construction: 2003, 1 used, very well-maintained universal milling machine with 3-axis digital display FAGOR, stepless feed and overarm drive Manufacturer: ARSENAL, Bulgaria Model: FUV 321 M Year of manufacture: 2003 Technical data: Spindles: Spindle mounting, vertical + horizontal ISO 50 Speed range, vertical, stepless 30 – 2000 rpm Speed range, horizontal, stepless 30 – 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Overarm adjustment approx. 600 mm Table swiveling ± 45° max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm Table adjustment: Feeds, longitudinal and transverse, stepless 12.5 – 630 mm/min dito, vertical, stepless 5 – 262 mm/min Rapid traverse, longitudinal and transverse 2.5 m/min dito, vertical 1.04 m/min Drive Drive power 7.5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: • 3-axis digital display, manufacturer FAGOR, model NV 300 M • Universal milling head system “HURON”, adjustable manually over 2 levels • Stepless feed via joystick and potentiometer in all 3 axes • Stepless speed for vertical + horizontal via potentiometer with 2 servo drives, manufacturer TELEMECANIQUE, model Altivar 28 • Stepless feed and stepless speed with digital display each • Overarm with motorized drive of the universal milling head • Increased speed range up to 2000 rpm • Automatic machining cycle for the X-axis • Horizontal milling device with 2 opposing bearing blocks • Coolant system • Central lubrication system • Swarf drawer • Machine feet • Machine light • Operating manual • Electrical equipment CE • CE compliant Original new price: 65,800.00 € net The machine can be inspected and demonstrated at our warehouse at any time after prior appointment. Bdodpfxsbpmuro Afwog Siegfried Volz Werkzeugmaschinen Ruüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Center distance: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg unsupported, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed adjustment 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table tilt: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW / (5.5 KW = Option) Infinitely variable speed adjustment of the grinding wheel with potentiometer Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor: 1.5 KW Lubrication motor: 0.1 KW Hydraulic tank: 80 liters Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle stock for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with infinitely variable drive with a rotating and lockable spindle. New digital feed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feeds, dwell times, rapid traverse distances, compatible with the old Karstens feed control, with a color Siemens touch panel, scale in X and Z axis, manufacturer HEIDENHAIN. Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna Bdjdpfx Aoiv Au Esfwsg

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output Bsdpfx Afsyug Hxowjdg • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, functionality: fully functional, mileage: 30 km, power: 140 kW (190.35 HP), fuel type: diesel, number of seats: 21, gearing type: automatic, overall weight: 5,700 kg, empty load weight: 4,100 kg, fuel tank capacity: 93 l, emission class: euro6, color: black, wheelbase: 4,325 mm, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, spoiler, summer tires, traction control, trailer coupling, MB Sprinter 519 Bluetec - BusConcept Premium - Seats: 19+1+1 - (COC / 2007/46 for 5.7t) ABS, ASR, ESP, EBV, BAS Driver airbag Power steering Central locking Immobilizer Bsdpswm Ev Defx Afwodg Key with remote control Active service system "Assist" Electric windows and side mirrors (heated) AGM 12V 95 Ah battery + second AGM battery Additional pulley for second compressor (roof air conditioning) Factory-installed automatic air conditioning (4.5 kW, independent of the roof air conditioning) Fuel tank 93 liters Cruise control Additional water heating at the factory Additional battery Multifunction steering wheel with adjustment 5-inch color screen for the driver 10.25 MBux radio multimedia system LED lighting (front and rear) Additional PTC engine heater (positive temperature coefficient) Equipment package (reinforced front and rear suspension, Long-life battery, reinforced shock absorbers, reinforced front axle) Set of summer tires 205/75 / R16C (reinforced) Spare wheel Lane keeping assist Active brake assist Hill start assist Crosswind assist JA7 – Blind spot assist BA3 – Active brake assist RY2 – Tire pressure monitoring Speed limiter (up to 100 km/h) Digital tachograph (legalized) Suspended driver's seat, adjustable, with armrest First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), wedge SEGE passenger seats with full adjustment (backrest adjustment and two-part side extensions) Seats have: armrests, 3-point seatbelts, newspaper nets, handles, contoured headrests Seats made of artificial leather and perforated artificial leather, black with colored details, produced by Intap 19 + 1 +1 seating configuration Platforms over the entire length of the vehicle Partition/wall behind the last seat row Windows – double, tinted, FLOCK Curtains on rails – black Four convectors running the full length of the passenger compartment (approx. 3 m) Convectors heating the passenger compartment, controlled via potentiometer, product VEHTEC WEBASTO roof air conditioning 10.5 kW, controllable via climatronic panel, with individual distribution to each passenger via X-Line panels White LED at the entry step Ncjbn I Dsibu U Iog H Dst White LED ceiling lighting White LED lighting in the passenger compartment LED platform lighting - orange Contour LEDs Luggage compartment LED lighting white Audio/video kit: an additional DVD player LCD monitor, roof-mounted at the pilot seat height Microphone on cable Speakers in the passenger compartment Rearview camera Recessed hull Luggage racks on both sides of the passenger compartment Non-slip, waterproof PVC floor Safety hammers - 3 units Sliding roof with end cap, allows emergency exit Belt fastening marking (sticker) Ergonomic handle at the vehicle entrance Interior upholstery made of eco-leather and soft material – easy to clean Interior thermal insulation Electric door – panorama – heated Delivery, leasing, or financing possible. Immediately available. Contact us: Irenäus Wardenga also WhatsApp Auto-Wardenga

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Bdodpfx Afst Hwzpewsg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm Bodpfxoyzzh Es Afwedg dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition Bedpfsrwq Urox Afwedg

Condition: excellent (used), Power resistor, wire potentiometer, resistor, potentiometer, dual potentiometer -Manufacturer: Siemens, unused potentiometer in original packaging Bedpfjgh Ixhsx Afwedg -Type: ASZ12.803 Quantity: 1 piece available -Dimensions: 65/50/H30 mm -Weight: 0.05 kg

Condition: used, TECHNICAL DETAILS Bsdpfx Ajuhbxasfwodg - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: new, functionality: fully functional, machine/vehicle number: NEW-12, mileage: 20 km, power: 140 kW (190.35 HP), fuel type: diesel, empty load weight: 3,740 kg, overall weight: 5,700 kg, fuel: diesel, fuel tank capacity: 93 l, color: black, gearing type: automatic, emission class: euro6, number of seats: 21, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, spoiler, summer tires, traction control, trailer coupling, MB Sprinter 519 Bluetec - BusConcept Premium - Seating: 19+1+1 - (COC / 2007/46 for 5.5t) ABS, ASR, ESP, EBV, BAS Driver airbag Power steering Central locking Immobilizer Key with remote control Active service system “Assist” Electric windows and side mirrors (heated) AGM 12V 95 Ah battery + second AGM battery Additional pulley for second compressor (roof air conditioning) Automatic air conditioning as standard (4.5 kW, independent of the roof air conditioning) Fuel tank 93 liters Cruise control Additional hot water preparation in the factory Additional battery Multifunction steering wheel with adjustment 5-inch color display for the driver 10.25 MBux radio multimedia system LED lighting (front and rear) Additional PTC engine heater (positive temperature coefficient) Equipment package (reinforced front and rear suspension, Durable battery, reinforced shock absorbers, reinforced front axle) Summer tire set 205/75 / R16C (reinforced) Spare wheel Lane keeping assistant Active brake assist Bedpfx Afjibu U Iswjdg Hill start assist Crosswind assist JA7 – Blind Spot Assist BA3 – Active Brake Assist RY2 – Tire pressure monitoring Speed limiter (up to 100 km/h) Digital tachograph (approved) Suspended driver's seat, adjustable, with armrest First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), wedge SEGE passenger seats with full adjustment (backrest adjustment and two-part side bolsters) Seats feature: armrests, 3-point seat belts, newspaper pockets, handles, contoured headrests Seats made of artificial leather and perforated artificial leather, black with colored details, manufactured by Intap 19 + 1 + 1 seat configuration Platforms across the entire length of the vehicle Partition behind the last row of seats Windows – double-glazed, tinted, FLOCK Curtains on rails – black Four convectors across the entire length of the passenger compartment (approx. 3 m) Convector heating of the vehicle passenger compartment, controlled via a potentiometer, product VEHTEC WEBASTO roof air conditioning 10.5 kW, controllable via climate control panel, with individual distribution to each passenger via X-Line panels White LED on the entrance step White LED ceiling lighting White LED lighting in the passenger compartment LED platform lighting - Orange Contour LEDs Luggage compartment LED lighting - white Audio/video kit: one additional DVD player LCD monitor, mounted on the roof at the level of the driver's seat Wired microphone Speakers in the passenger compartment Rear view camera Deepened body Luggage racks on both sides of the passenger compartment Non-slip floor, waterproof, made of PVC Safety hammers - 3 pcs. Sliding roof with end cap, which enables an emergency exit Seat belt fastening marking (sticker) Ergonomic handle at the entrance to the vehicle Interior upholstery made of eco-leather and soft material – easy to clean Thermal insulation of the interior Electric door – panoramic - heated Delivery, leasing or financing possible. Available for immediate delivery. Contact us: Auto-Wardenga Irenäus Wardenga, also via WhatsApp

Year of construction: 2022, condition: as good as new (ex-display), 1 semi-automatic high-performance horizontal bandsaw with double column guidance and 2° cutting inclination to the table support surface Make:BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface Bdodpfx Afem Rg H Reweg - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform IMMEDIATELY AVAILABLE

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Bdodpfepu R Ncjx Afweg Weight: 285 kg

Condition: good (used), Spindle diameter: 75 mm Spindle taper: MK 5 Table clamping surface: 900 x 710 mm Travel: X-axis (cross): 850 mm Y-axis (vertical): 750 mm Z-axis (longitudinal): 1050 mm W-axis (quill): 600 mm B-axis (table): 360° Table load capacity: approx. 3500 kg Infinitely variable spindle speed range: 20 – 1500 rpm Feed range: yes Rapid traverse: yes Drive power: 12 kW Dimensions (L x W x H): 3950 x 2200 x 2200 mm Bdsdpextu D Usfx Afweg Weight: 5800 kg Accessories / Special features: • 3-axis digital readout, manufacturer FAGOR • Full machine control via swiveling operator panel • Machine bed cast in one piece • Infinitely variable spindle speed, adjustable via servo drive with potentiometer • Feed + rapid traverse • Coolant pump • Emergency stop switch Includes additional spindle mount DIN 55027 Gr. 8 on the drilling spindle, e.g. for mounting a 3-jaw chuck or a faceplate At the end of the machine bed, a table guide with drive is mounted to accommodate a tailstock. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund – Wambel / Germany

Year of construction: 1990, condition: good (used), machine/vehicle number: 2ß90 522, Technical specifications: - Bending capacity: - Steel pipe: Ø 20 - 60 x 4 mm - Stainless steel pipe: Ø 20 - 50 x 3 mm - Max. bending moment: 6.2 cm - Max. bending angle: 180° Bodefndg Ejpfx Afwjdg - Max. radius: 125 mm - Bending speed: 8 sec - Drive: 400 V / 3 kW - Space requirement: approx. L 2400 x H 1600 x D 1000 mm - Weight: approx. 1400 kg - Includes: - Bending angle control via potentiometer with digital display - 6-fold preselection of bending angles - Internal + external pipe deburring tool - Bending tools Rx2.5D: Ø 38; Ø 50; Ø 65;

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, operation weight: 4,200 kg, Year of construction: 2021, operating hours: 1,150 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Operating weight: 4,200 kg, Kubota D1803-CR-T Turbo Stage V - Tier 4 Final diesel engine, 32.8 kW/46 hp, water-cooled, Swivel arm and monobloc boom, zero tail, LOAD SENSING hydraulic flow sharing control block and electronically controlled load sensing pump with ECO - Standard - Power working mode, automatic speed reduction, dozer blade, rubber tracks, Bsdstt Dh Dspfx Afwedg foldable, cushioned cab ROPS/TOPS/FOPS level 1 with heating and radio preparation, Digging depth: 3,085 mm, Powertilt PT05 Additional equipment: Air conditioning, load holding valve on blade, rear camera, Plexiglas canopy, LEDs at the front, rear and on the boom, rotating beacon, Potentiometer on AUX1, electrical switching, Powertilt

Condition: used, Year of construction: 1999, Used capping machine AROL 4T up to 6500 bph Introduction to AROL 4T’s Versatility In the bottling industry, choosing an efficient capping machine is crucial. Indeed, the used AROL 4T capping machine represents an optimal solution. Companies seek high performance without compromising precision. Moreover, safety is a key concern. Four-Head Capping Mechanism Equipped with four heads, this machine is designed for both flat and mushroom cork caps. It offers indispensable versatility. Flexibility and adaptability are demanded in today’s market. Consequently, the head height adjusts electrically for quick adaptation. This is crucial to minimize downtime and, therefore, maximize efficiency. Durable and Hygienic Design The base, made entirely of stainless steel, ensures longevity and resistance to corrosion. Additionally, it facilitates cleaning and maintenance. Thus, maintaining hygienic standards in the food and beverage industry is key. Bedpfsvgt R Rox Afwodg Operator Safety Features Safety in the workplace is a top priority. Therefore, the machine is equipped with safety protections. These ensure the physical integrity of operators during production. Significantly, bottle entry is from the left. This detail is fundamental for optimizing integration within production lines. It, furthermore, facilitates logistics and space management. Adjustable Production Speed The production speed reaches up to 6500 bottles per hour. It is adjustable via a potentiometer. This demonstrates the AROL 4T capping machine’s ability to meet demanding production needs. Adjusting speed allows for flexible adaptation to different productions. Consequently, this maximizes operational efficiency. Proven Reliability and Efficiency Produced in 1999 and complying with CE standards, this machine has proven its reliability. It was used continuously until 2022. The power supply of 380 volts three-phase, 50 Hz, ensures operability. There is no need for particular adaptations from an energy perspective. Conclusion  In conclusion, the used AROL 4T capping machine up to 6500 bph is a high-level solution. It is perfect for companies needing a reliable and efficient machine. It ensures the highest quality of cap application. Its robust construction, combined with flexibility and safety features, makes it a valuable investment. Optimizing productivity and quality in every bottling process is assured. This investment significantly enhances the efficiency and quality of bottling operations.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: Bdsdpjyug R Rjfx Afwog • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2026, Equipment: cabin, Painting/Spraying Booth The Reinox 300x140 professional painting/spraying booth is designed for partial painting and spraying in production facilities where controlled filtration and safety measures are required in environments with explosive materials (ATEX). Thanks to its powerful extraction system and three-stage filtration, a clean working environment is ensured even during intensive operation. De Dsia Ta Hskryqzeci !! This is always a new machine (photo from customer installations). We are the manufacturer. !! Technical specifications: Bdsdozkfnrjpfx Afwsg - Fan is certified for ATEX zone 22 - Extraction area: 3,000 x 1,400 mm - Power supply: 400 V / three-phase - Control: frequency inverter – stepless power control via a potentiometer on the control panel. - Filtration: three-stage filter Certifications & documentation: CE, ATEX, complete technical documentation Warranty: 12 months It is possible to order machines in various individual configurations and sizes! Do not hesitate to contact us.

Year of construction: 2026, condition: new, machine/vehicle number: KVK 3 Automatik_1, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. Bdsdpfxezr Hl Ue Afweg If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Condition: new, Year of construction: 2026, Electric Pallet Truck with Electronic Scale The electric pallet truck with an electronic scale is an innovative device designed for modern warehouses, logistics centers, and companies involved in goods distribution. It combines the functionality of a traditional pallet truck with advanced weighing technology, allowing simultaneous transport and precise weighing of loads, significantly improving work efficiency. Main advantages of the electric pallet truck with electronic scale Load capacity of 2000 kg – the pallet truck enables the transport of heavy loads, making it an ideal solution for handling large goods in warehouses and distribution centers. Built-in electronic scale – allows simultaneous movement and weighing of loads, eliminating the need for additional stationary scales and streamlining logistics operations. Precise speed adjustment – potentiometers allow the operator to adjust driving speed, ensuring smooth and safe maneuvering in narrow warehouse aisles. “Turtle mode” – enables very slow and controlled movement, ideal for precise positioning of loads in confined spaces and providing additional safety in demanding working conditions. Ergonomic design – ensures operator comfort thanks to an intuitive control panel, making the pallet truck easy to operate and maneuver. High reliability – a robust construction and high-quality components guarantee long service life, even under intensive working conditions. Construction and technology The electric pallet truck with an electronic scale is equipped with a 0.75 kW drive motor, providing sufficient power to transport loads weighing up to 2000 kg. Thanks to the use of a 2x12V/40Ah battery, the truck offers extended operating time. An electromagnetic brake ensures safe operation, while the control system with potentiometers enables precise speed adjustment and easy maneuvering. The built-in weighing system with a digital display allows the operator to monitor the weight of transported goods at any time. Precision and work efficiency The pallet truck provides accurate weighing of transported loads through its integrated electronic scale. The operator can instantly check the weight of goods, improving logistics processes and enabling continuous load monitoring. The adjustable travel speed and “turtle mode” increase safety and allow precise positioning of the truck in narrow and demanding working areas. This makes the device an excellent solution for warehouses, production facilities, and distribution centers where efficiency and accuracy are essential. Standard equipment Built-in electronic scale with display Battery: 2x12V/40Ah Bodpsricv Nsfx Afwsdg Drive motor: 0.75 kW “Turtle mode” for precise maneuvering Ergonomic control handle Charger included Technical specifications Parameter Value Load capacity 2000 kg Turning radius 1300 mm Fork height when raised 200 mm Fork height when lowered 90 mm Fork length 1150 mm Fork width 550 mm Battery voltage / rated capacity 2x12V/40Ah Drive motor power 0.75 kW Lifting motor power 0.8 kW Brake Electromagnetic Travel speed with/without load 4.5 km/h Maximum gradient with/without load 3/5% Length / width / height 1620 x 570 x 1225 mm Weight 173 kg

Condition: new, Device designed for inclined transport of products over a specified distance and height * Modular, solid, food-grade conveyor belt with straight cleats * Discharge height: 3,830 mm * Discharge width: 700 mm Bdjdpfx Afjx A Iuxowsg * Straight cleats H=50 mm, spaced every 200 mm * Belt working width: Br=520 mm * Infeed height: 640 mm * Infeed hopper dimensions: 870 mm x 720 mm * Length of lower horizontal section: 800 mm * Length of upper horizontal section: 500 mm * Belt guided on steel sliding rails * Belt supported by sides on return * Belt speed adjustable via frequency inverter – potentiometer on control panel * Fixed plastic side guards * Covered idler roller * Device equipped with trays at the bottom * Structure mounted on height-adjustable feet * Swivel castor wheels for easy positioning * Drive via gearmotor suspended on the drive roller shaft * Acid-resistant (stainless) control panel