Used Potentiometer for sale (198)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Nedpfoyug R Rex Acfswh Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs Nwsdoyug Hxopfx Acfjh • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions - Coolant gun, including high-pressure pump - Work area lighting (LED) - Cooling system Nwodjvvwblepfx Acfoh - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button - Handwheel - Remote support on machine – allows remote diagnostics

Year of construction: 2024, condition: used, For inquiries regarding the crawler, Mr. Herden is available to assist you (by phone). Seppi M. MAX 75 HP / 75 PS / Radio-controlled crawler vehicle / Recovery winch / Seppi M. MICROFORST rc 155 forestry mulcher / Seppi M. H 5 rc 175 mulcher / In stock & immediately available Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard specification and features: Dimensions*: - Overall width, undercarriage retracted: 1,650 mm - Overall width, undercarriage extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Cross/longitudinal incline: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Output: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversing fan (automatic fan cleaning) Drive: Hydraulic system for attachments: - High-flow hydraulic circuit (closed circuit) for attachments (double-acting): - Capacity: 93 l/min max. at 2,750 rpm - Pressure: 380 bar Hydraulic system services: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: 15 l/min max. at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: 154 l/min max. at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and traction on slopes up to 55° under optimal conditions - Hydraulic adjustment of vehicle width 800 mm (2x400 mm) - AUTO TRACK TENSION: Active automatic track tensioning - Patented track derailment protection - Stability and traction thanks to robust tread and large track contact area Control: - Remote control with graphic display (machine vital data and tilt indicator) - Range: 150 m - Potentiometer for speed control with variable feed from 0 to 100% Lifting gear: - FLOAT: Lifting gear with float position (ground pressure control) Standard equipment: - Vehicle with roll bar - LED headlights - Internal components protected by heavy-duty steel covers - Skid plate to protect the engine and hydraulics - Color: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry protection with recovery winch Optional: SEPPI M. MICROFORST rc 155 – hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a very large selection of various Seppi M. products in stock and immediately available! Mr. Herden (phone) will be glad to assist you. We are happy to provide you with a financing offer upon request. We are an official Seppi M. sales and service partner. We supply the complete Seppi M. product range! Subject to error and prior sale! Nwodpfx Aeyfrpgecfjh Rental possible = Further information = New: Yes For more information, please contact Tobias Ebert.

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: Nedpfx Asv Ha Uiocfewh CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: refurbished (used), REKORD 400 MODIFIED WITH TANK AND COOLANT SYSTEM SHARPENING MACHINE FOR CIRCULAR BLADES IN HARD METAL (CARBIDE) AND HSS SAWS (FULL OIL PROCESSING.) Njdpfx Ash A N R Sjcfswh FEATURES Wheel diameter …………… ... 150. Wheel motor …………… .. HP 1 0.25 HP sharpening box movement motor Cooling system (FULL OIL) Electronic cam reading system (SLOW CONTROLLED BACK FINISHING) Magnifying glass lamp (FOR SMALL TEETH) Sharpening speed electronically adjustable by potentiometer. Manual cutting degrees setting by means of a graduated rod. N ° 1 copy disc N ° 1 diamond wheel diameter 150 x 4 - 60 ° degrees. N ° 1 Bakelite wheel for HSS Minimum blade diameter …………… ..mm. 30 (with small blade holder on request) Maximum blade diameter …………… mm. 400

Condition: repair required (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, CNC milling machine from Kunzmann for industrial machining tasks. Nwjdpfx Acoyyvnwofsh Condition: currently not fully operational - Motor spindle does not start. Suspected cause: controller board - Potentiometer defective - Gib strips need adjustment - Maintenance unit missing Manufacturer: Kunzmann Maschinenbau GmbH Model: BA1200 Machine no.: 120006 Year of manufacture: 2003 Machine type: CNC machining center Design: vertical Control: HEIDENHAIN Travel X: 1200 mm Travel Y: 600 mm Travel Z: 600 mm Table size: 1400 x 600 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 63 A Video available on request; the spindle still turns smoothly!

Condition: good (used), Year of construction: 2019, Professional packaging machine from a renowned European manufacturer for adhesive tape widths up to 50 mm. Maximum carton dimensions approximately: width 525 mm x height 505 mm; length unlimited. This is a robust machine designed for the highest demands. - Double-sided sealing of cartons top and bottom with adhesive tape. - Transport speed up to approx. 20 m/min. - Various carton formats can be adjusted continuously in height and width via a quick-adjustment system (no hand crank required). - Working height adjustable from 635 to 950 mm. Special features/options: Nodpfx Aceyywazefjwh - Delivery includes an infeed conveyor approx. 1 m in length and an outfeed conveyor approx. 1 m in length. The outfeed conveyor is equipped with a stop plate, which can be removed if needed. Both roller conveyors are adjustable in height and inclination. - The machine has an adjustable sealing device for carton flaps at the infeed. - Machine speed is adjustable via a potentiometer. The machine can be demonstrated under power.

Condition: good (used), Table size 420 x 250 mm. Speeds: electronically controlled, stepless via potentiometer, 132 - 4500 rpm. Nedeyywn Ejpfx Acfewh

Condition: new, Year of construction: 2023, Hydraulically adjustable tilting table Maximum load: 1,000 kg Turntable diameter: 850 mm Turntable speed: 0.05 - 1.0 RPM Length / Width: 1,800 mm / 1,450 mm Turntable height, horizontal: 800 mm - 1,275 mm Turntable height, vertical: 625 mm - 1,100 mm Control devices: 2-pedal foot switch / Rotate LEFT / RIGHT Nedpfjh T Dafox Acfswh Handheld remote control: Rotate LEFT / RIGHT / STOP, speed control (potentiometer) for stepless speed adjustment, buttons for tilting FORWARD / BACKWARD, buttons for raising UP / DOWN Operation on the control cabinet: Push button "MACHINE ON" Selector switch "HAND / FOOT OPERATION" Main switch "ON / OFF"

Year of construction: 2023, condition: as good as new (ex-display), Technical specifications: - Load capacity: 1500 kg - Tare weight: 300 kg - Insertable workpiece diameter: approx. 50 - 3000 mm Nsdjd Iuqlopfx Acfswh - Roller diameter: 250 mm - Roller width: 50 mm - Rotational speed: approx. 100 - 2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Year of construction: 2022, condition: new, Height-adjustable L-manipulator Load capacity: 500 kg Stroke: 640 mm, minimum height of the rotary table: 480 mm, maximum height: 1,110 mm Swiveling range: +/-185° Rotary table diameter: 800 mm Welding current: 400 A Torque of the rotary table: 900 Nm Torque of the swiveling arm: 900 Nm Overall length: 2,495 mm Height: 1,855 mm Width: 900 mm The rotary table is controlled via a handheld remote control with the following functions: • RAISE arm • LOWER arm • SWIVEL arm RIGHT • SWIVEL arm LEFT • Potentiometer for stepless SPEED adjustment of the rotary table A dual-pedal foot switch is available for controlling the rotary table, with the following functions: • Rotate rotary table RIGHT • Rotate rotary table LEFT Nodpfx Aoh Td Thecfjwh

Year of construction: 2022, condition: new, Height-adjustable rotary tilting table Load capacity: 500 kg Stroke: 1,015 mm, minimum table height: 345 mm, maximum tilting angle: 120° Table diameter: 800 mm Welding current: 400 A Table torque: 1,300 Nm Overall length: 2,365 mm Height (housing): 1,030 mm The rotary tilting table is controlled via push buttons on the machine housing with the following functions: • Raise arm • Lower arm • Potentiometer for stepless speed adjustment of the table A dual-pedal foot switch is available for controlling the table, with the following functions: • Rotate table to the RIGHT Njdoh Tfbzjpfx Acfswh • Rotate table to the LEFT

Year of construction: 2023, condition: as good as new (ex-display), Technical specifications: - Load capacity: 15,000 kg - Tare weight: 960 kg - Workpiece diameter: approx. 50 - 3200 mm - Roller diameter: 250 mm Nodpfx Asd Iuqaocfjwh - Roller width: 240 mm - Rotational speed: approx. 100-2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Year of construction: 2022, condition: new, Technical data: - Load capacity: 10,000 kg - Tare weight: 850 kg Nwedpfsfxw H Aox Acfjh - Workpiece diameter: 50 - 3500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotation speed: approx. 100-2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Year of construction: 2022, condition: new, • Load capacity of the rotary table: 1,000 kg Njdpfefxw Dcox Acfjwh • Machine body: Sheet metal construction made of high-quality steel • Length/Width: 1,000 mm x 1,180 mm • Height: 2,220 mm • Stroke of the rotary table (vertical): 700-1,400 mm • Diameter of the rotary table: 600 mm • Chuck: M-WPS500 • Machine weight (DSH): 1,400 kg • Rotary table speed: 0.1-2 rpm Operation at the control cabinet: Selector switch: Rotate foot switch or push button on the control cabinet Rotate: LEFT/RIGHT Lift: UP/DOWN Potentiometer for stepless speed control Foot switch: Rotate: LEFT/RIGHT Welding current transmission: 600A

Condition: good (used), Spindle diameter: 75 mm Spindle taper: MK 5 Table clamping surface: 900 x 710 mm Travel: X-axis (cross): 850 mm Y-axis (vertical): 750 mm Z-axis (longitudinal): 1050 mm W-axis (quill): 600 mm B-axis (table): 360° Table load capacity: approx. 3500 kg Infinitely variable spindle speed range: 20 – 1500 rpm Feed range: yes Rapid traverse: yes Drive power: 12 kW Dimensions (L x W x H): 3950 x 2200 x 2200 mm Weight: 5800 kg Accessories / Special features: • 3-axis digital readout, manufacturer FAGOR • Full machine control via swiveling operator panel • Machine bed cast in one piece • Infinitely variable spindle speed, adjustable via servo drive with potentiometer • Feed + rapid traverse • Coolant pump • Emergency stop switch Includes additional spindle mount DIN 55027 Gr. 8 on the drilling spindle, e.g. for mounting a 3-jaw chuck or a faceplate Nsdpfx Acsxtu D Uefswh At the end of the machine bed, a table guide with drive is mounted to accommodate a tailstock. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund – Wambel / Germany

Condition: new, Semi-automatic metal bandsaw with high cutting accuracy. This machine allows for stepless 90° cuts, as well as miter cuts, from left 45° to right 30°. (Swivel range: left 45° and right 60°) Standard equipment: - Large, rotatable support table – wear-free! (The saw blade channel rotates during miter cuts) - Belt tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via a short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – pipe) - Lowering of the saw arm via a hydraulic cylinder; stepless adjustment - Easy, manual movement of the clamping bar R/L - Electrical belt tension monitoring with saw blade breakage detection - Coolant pump with dual feed to the saw blade guides - Carbide saw blade guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data: Nodpfx Acoctgkzsfjwh ● Cutting range: 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° L round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° R round 180 mm / flat 205 x 160 mm / square 160 x 160 mm 30° R round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW // 400 V // 50 Hz ● Total connected load: 3.35 kVA ● Belt speed: 20-120 m/min, stepless ● Saw blade dimensions: 2910 x 27 x 0.9 mm ● Remaining piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request!

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1/10/2025, control cabinet height: 1,000 mm, Extruder FI 25, 3 heating zones in the barrel + 2 heating zones in the die head, designed for universal use with a nitrided plasticizing system. - Plasticizing unit fi 25 mm, nitrided - Barrier screw with mixing tip (for hard PVC) - Output torque on screw 636 Nm - maximum screw speed 80 rpm - Screw start interlock to prevent underheating - Barrel equipped with feed zone cooling (liquid cooled) - 3 barrel temperature control zones - Heating-cooling set (band heaters, cooling fan) - Lenze gearmotor with 5.5 kW motor - hopper - Stepless speed control via potentiometer and inverter - Temperature control with Omron controllers for full monitoring - Heater current measurement - heater burnout protection Nwedjxtf Hgjpfx Acfeh - PID heating tuning function - type J thermocouples - Die head with 2 heating zones, no cooling

Condition: new, functionality: fully functional, mileage: 20 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,700 kg, empty load weight: 3,740 kg, fuel tank capacity: 93 l, emission class: euro6, color: black, number of seats: 21, Year of construction: 2026, fuel: diesel, machine/vehicle number: NEW-12, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, spoiler, summer tires, traction control, trailer coupling, MB Sprinter 519 Bluetec - BusConcept Premium - Seating: 19+1+1 - (COC / 2007/46 for 5.5t) ABS, ASR, ESP, EBV, BAS Driver airbag Power steering Central locking Immobilizer Key with remote control Active service system “Assist” Electric windows and side mirrors (heated) AGM 12V 95 Ah battery + second AGM battery Additional pulley for second compressor (roof air conditioning) Automatic air conditioning as standard (4.5 kW, independent of the roof air conditioning) Nwjdjibu U Iepfx Acfsh Fuel tank 93 liters Cruise control Additional hot water preparation in the factory Additional battery Multifunction steering wheel with adjustment 5-inch color display for the driver 10.25 MBux radio multimedia system LED lighting (front and rear) Additional PTC engine heater (positive temperature coefficient) Equipment package (reinforced front and rear suspension, Durable battery, reinforced shock absorbers, reinforced front axle) Summer tire set 205/75 / R16C (reinforced) Spare wheel Lane keeping assistant Active brake assist Hill start assist Crosswind assist JA7 – Blind Spot Assist BA3 – Active Brake Assist RY2 – Tire pressure monitoring Speed limiter (up to 100 km/h) Digital tachograph (approved) Suspended driver's seat, adjustable, with armrest First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), wedge SEGE passenger seats with full adjustment (backrest adjustment and two-part side bolsters) Seats feature: armrests, 3-point seat belts, newspaper pockets, handles, contoured headrests Seats made of artificial leather and perforated artificial leather, black with colored details, manufactured by Intap 19 + 1 + 1 seat configuration Platforms across the entire length of the vehicle Partition behind the last row of seats Windows – double-glazed, tinted, FLOCK Curtains on rails – black Four convectors across the entire length of the passenger compartment (approx. 3 m) Convector heating of the vehicle passenger compartment, controlled via a potentiometer, product VEHTEC WEBASTO roof air conditioning 10.5 kW, controllable via climate control panel, with individual distribution to each passenger via X-Line panels White LED on the entrance step White LED ceiling lighting White LED lighting in the passenger compartment LED platform lighting - Orange Contour LEDs Luggage compartment LED lighting - white Audio/video kit: one additional DVD player LCD monitor, mounted on the roof at the level of the driver's seat Wired microphone Speakers in the passenger compartment Rear view camera Deepened body Luggage racks on both sides of the passenger compartment Non-slip floor, waterproof, made of PVC Safety hammers - 3 pcs. Sliding roof with end cap, which enables an emergency exit Seat belt fastening marking (sticker) Ergonomic handle at the entrance to the vehicle Interior upholstery made of eco-leather and soft material – easy to clean Thermal insulation of the interior Electric door – panoramic - heated Delivery, leasing or financing possible. Available for immediate delivery. Contact us: Auto-Wardenga Irenäus Wardenga, also via WhatsApp

Condition: new, Year of construction: 2026, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Njdpfev R Tgtjx Acfjwh Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Concept 70 Eco body press Year of manufacture 2025 including the following options: - Rapid traverse speed adjustment speed up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections when pressing bodies together, as well as when making drawers. Brief introduction: • With tried and tested tolerance compensation (GANNOMAT system) • 2 potentiometers for continuously adjustable pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco or Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco or Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds 5/10/25 mm/sec. (with fine positioning / creep speed) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simple operation via LCD display Universal application area: • Bodies e.g. for furniture and cabinets • Mitered bodies • Bodies with protruding lids • Drawers • Pressing several bodies / drawers Advantages: • Tried and tested tolerance compensation (GANNOMAT system) • Electromechanical body press with frequency-controlled gear motors • Independent vertical and horizontal press beam • Long service life thanks to tried and tested, high-quality components • Solid and robust construction • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple thanks to simple and practical control panel • Fast thanks to press beam positioning speed of up to 50 mm/sec (option) • Efficient thanks to precise pressing of a wide variety of body sizes Nodpfx Ajvxgrrscfjwh • Flexible thanks to adjustable parameters such as e.g. Pressing force, pressing time, travel speeds • Precise through precise angle pressing of furniture bodies and drawers • Professional production of bodies and drawers using modern body presses

Year of construction: 1990, condition: good (used), machine/vehicle number: 2ß90 522, Technical specifications: - Bending capacity: - Steel pipe: Ø 20 - 60 x 4 mm - Stainless steel pipe: Ø 20 - 50 x 3 mm - Max. bending moment: 6.2 cm Nwedpsfndg Esfx Acfeh - Max. bending angle: 180° - Max. radius: 125 mm - Bending speed: 8 sec - Drive: 400 V / 3 kW - Space requirement: approx. L 2400 x H 1600 x D 1000 mm - Weight: approx. 1400 kg - Includes: - Bending angle control via potentiometer with digital display - 6-fold preselection of bending angles - Internal + external pipe deburring tool - Bending tools Rx2.5D: Ø 38; Ø 50; Ø 65;

Condition: used, Year of construction: 2014, functionality: fully functional, pressure: 8 bar, temperature: 20 °C, type of input current: three-phase, input voltage: 400 V, overall weight: 1,250 kg, usable tank capacity: 90 l, rotational speed (max.): 758 rpm, Equipment: rotational speed infinitely variable, We are offering this used RESPECTA DB13A/20-30L mixing and stirring unit, year of manufacture 2014. Manufacturer: RESPECTA Model: DB13A/20-30L Year: 2014 Condition: used Machine type: Mixing and Stirring Unit Weight: 1,250 kg Voltage: 400 V Frequency: 50 Hz CE safety standards The machine is in perfect working condition. This machine can also be purchased together with other units for a complete production line. Technical Details - Mixing Unit: Nwsdpfoyxg Dgox Acfsh The mixing unit is designed for blending dry fillers with liquids. Maximum filler particle size: 2mm Mixture output rate: approx. 20 – 30 l/min Mixing tool: single-flight mixing screw, left-handed, equipped with wear-protection coating, robust cylinder design with high surface hardness Drive: 3-phase motor, 4 kW – 379 rpm, 400V / 50 Hz Speed range: adjustable from 0 to 758 rpm Screw overload protection: set at 80% of the rated current Quantity adjustment: potentiometer, stepless, without altering the mixing recipe Technical Details - Binder Premixer: Dynamic mixing of pure liquids without any solid content. Mixing performance: max. 5 l/min Mixing tool: single-flight mixing screw, left-handed System materials: stainless steel, Viton, PTFE Drive: three-phase motor, 0.55 kW, 2830 rpm, 230-400 V / 50 Hz Pressure monitoring: S-11 pressure transmitter, 0-4 bar G ½" Pressure display: control terminal at switch cabinet Technical Details - Filler Dosing System: Four dosing systems for volumetric dosing of free-flowing, non-bridging dry fillers. The dosing units are interchangeable with identical units and secured with quick-release clamps. All dosing units are equipped with level sensors. For fine fillers, a horizontal agitator is integrated in dosing unit 2 to prevent bridge formation as much as possible. Fillers with max. grain size 2mm Dosing rate: approx. 2 – 10 l/min Dosing tool: single-flight spiral, left-handed Dosing drive: geared motor, 0.75 kW – 91 rpm, 230-400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 182 rpm Quantity adjustment and display: control terminal at switch cabinet Storage vessel Capacity: approx. 90 l (4x) Technical Details - Resin Dosing System: Pump unit for volumetric dosing of pure liquids without admixtures of solid or reactive substances. Dosing rate: approx. 400 – 2000 ml/min Viscosity at 20°C: approx. 2,000 mPas Pump type: gear pump Pump pressure: max. permitted 8 bar Drive: three-phase geared motor, 0.37 kW – 291 rpm, 230–400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 582 rpm Quantity adjustment and display: control terminal at switch cabinet Dismantling and removal at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D Nedpfx Acsyrmzqsfjwh MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer