Used Pre-Drawing Machine for sale (70,518)

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm Iiodefxyh Aspfx Ab Neb work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 Iijdpsmck Ryefx Ab Njb 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Iisdpfsxpqy Dox Ab Nob Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Iiodpfx Abjw Iq Ugo Njb Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Technical specifications: Iiedpfoy R Sp Esx Ab Neb Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 900/1000 mm Hopper height: 930 mm Hopper capacity: 840 L Throughput: 60 kg/h Power supply: 400V Motor power: 7.5 kW Emergency stop switch Overall dimensions: Length: 1200 mm Width: 1600 mm Height: 1500 mm

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate Iedpfxoy Rumys Ab Nsib - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Iisdoy Rummopfx Ab Njb Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate Iiedpfx Absy Rumae Njb

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection Iijdpfx Ajy Rulvsb Njb – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: excellent (used), Year of construction: 1960, Format (cm): 54x72 Iisdey Nmhmjpfx Ab Nsb Number of Colors : 2 (round+flat)

Condition: used, functionality: fully functional, OMEC 450 Manual Drawer Joint Milling Machine – after technical inspection, ready for operation Specification: • Condition: Used, after comprehensive technical inspection • Manufacturer: OMEC • Total power: 1.1 kW • Max milling width: approx. 35 cm • Manual head feed • Pneumatic clamps – 4 pcs. • Overall dimensions: 90 x 60 x 128 cm (W x L x H) Ijdey R Ewpopfx Ab Noib Additional information: • The machine is in good technical condition, ready for immediate use • Shown photos reflect the actual condition of the item for sale • Possibility to switch on and test the device on site • Free machine operation training (at the company headquarters) • The price stated in the listing does not include VAT and transport costs Financing and transport: • We arrange transport via MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or lease loan

Condition: excellent (used), functionality: fully functional, The ULMA Taurus 570 traysealer is a high-performance packaging machine specially designed to meet the needs of manufacturers seeking to improve efficiency. Its ability to handle large packs, up to 510 mm, ensures fast, accurate packaging. What's more, its compact design makes it easy to integrate into existing production lines, optimizing space and workflow. In addition, this machine stands out for its sturdiness and reliability. In fact, it guarantees a perfect seal, ensuring product protection throughout the entire process. With this tray sealer, you can also reduce manual intervention, speeding up production while maintaining high quality standards. What's more, the machine's smooth, intuitive operation makes it easy for operators to get to grips with it, boosting productivity. Iijdpsu Nwyxofx Ab Neb In short, the ULMA Taurus 570 tray sealer combines efficiency, reliability and adaptability, offering a complete solution for demanding packaging lines while guaranteeing consistent, high-quality results. Technical specifications: Type: Taurus 570 Max. size. 510 mm Dimensions: 4700 x 1100 mm (L x W)

Condition: excellent (used), functionality: fully functional, The MATRIX compact pneumatic sealer is designed to improve the efficiency of packaging processes in production plants. Thanks to its innovative design, it enables rapid packaging of single products or batches, while ensuring simple handling. The operator places the film on the unwinder, adjusts the worktable, and manually inserts the product into the film, before transferring the assembly to the sealing frame. What's more, the frame's pneumatic descent ensures precise, even sealing, guaranteeing a flawless finish on every cycle. What's more, the MATRIX sealer is equipped with a height-adjustable conveyor, making it adaptable to a variety of product types. With its electronic control system, it offers optimum control of the welding process, avoiding common errors associated with incorrect temperature or pressure. What's more, its automatic ejection conveyor optimizes work flow by rapidly directing products to the shrink tunnel. Iedpfx Abou Nv Eyo Njib In short, the MATRIX pneumatic sealer is the perfect choice for companies looking to boost productivity while improving packaging quality. TECHNICAL SPECIFICATIONS : Model: MATRIX Power rating: 10 kW Weight: 340 Kg Maximum product height: 180mm. Height-adjustable sealing conveyor. Pneumatic lowering of sealing frame. Push-button or pedal control, or cyclic operation. 7.6 m/min fixed-speed ejection conveyor. Metal mesh tunnel conveyor with variable speed from 3 to 10 m/min. Impulse welding controlled by electronic regulator. Welding blade in high position. Tunnel temperature controlled by electronic thermoregulator.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, The Arol capper is an essential machine for companies looking to optimize their vacuum packaging process. It offers an effective solution for hermetically sealing 84 mm diameter jars, ensuring optimal product preservation. Thanks to its advanced technology, it ensures a perfect vacuum inside the containers. As a result, the shelf life of the food is extended and its quality preserved. Furthermore, the capper is equipped with a lid loading boom, which facilitates the process and increases productivity. Furthermore, the Arol capper stands out for its reliability and robustness, ensuring long-term use. Furthermore, it integrates easily into existing production lines, allowing for a smooth transition. On the one hand, its operation is simple and intuitive, reducing staff training time. On the other hand, it helps increase yield without compromising the quality of the final product. This allows companies to improve their market competitiveness. By choosing the Arol capper, you're choosing a machine that's been proven in numerous industries since 2011. As a result, it meets strict hygiene and food safety requirements. In short, this capper is the ideal tool for improving the efficiency of your packaging line while ensuring customer satisfaction. Technical specifications: Jar diameter: 84 mm Iodpou Nwiyofx Ab Njib Vacuum capper Lid loading boom Year: 2011 LVhRJ7/Y

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann Iiodpfx Abox Ry Tfo Nsb +++ Note: Machine is part of an online auction! +++

Condition: used, Year of construction: 1965, Make: MÜLLER, Model: BZE1600-35.2.1, Year of manufacture: 1965, Serial no.: 902, Max. press force: 1,600 t (ram 1,000 t + blank holder 600 t; can be coupled), Sliding table, 3,500 x 2,750 mm, Ram clamping area 3,500 x 2,750 mm, Ram stroke 1,400 mm, Ram adjustment 350 mm, Cushion force (table) 36 - 360 t, Cushion stroke (table) 250 mm, Hydraulic tool clamping on ram, Press control, Manufacturer: Siemens, Type: Simatic S7, Operator panel: Simatic OP37 Iedsx Rzkxjpfx Ab Nsib +++ Attention: Machine is part of an online auction! +++

Condition: ready for operation (used), functionality: fully functional, power: 2.2 kW (2.99 HP), empty load weight: 350 kg, planing from above, optimal surface quality, processing speed 50 m/min, no need for intermediate sanding, trouble-free machining even of damp wood, maximum working width 250 mm, maximum chip thickness 3/10 mm, clearance height 1-180 mm, tool adjustment 0°-60°, motor power 2.2 kW, weight 350 kg. Iijdpjy H Hkiefx Ab Nob

Condition: ready for operation (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, We offer this ready-to-use Heidelberg printing press, model SBB 570mm x 820mm 22 ½" x 32", year of manufacture: unknown. Heidelberg cylinder with hot foil stamping and die cutting attachment Heidelberg SBB 570mm x 820mm 22 ½" x 32 ¼" Aluminum heating plate from 2019 divided into 3 heating sections Temperature control: up to 200° C 2 independent foil feed tracks Option of foil feed in cyclic mode Single foil unwinder Power supply: 230 V / 400 V AC 50 HZ Total power consumption: 4.7 kW Heating plate power: 4.5 kW The removable heating plate allows the machine to be converted from gilding to die cutting Maximum mechanical paper handling speed: 2,500/hour Maximum sheet size: 570 x 820 mm Iiedsy Izl Depfx Ab Neb For questions or further information, please send a message or contact us by phone.

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure Isdpfx Absf Sqcyj Nsib ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Year of construction: 1985, condition: ready for operation (used), Compression spring making machine. Most of the Schenker range of machines, as well as some Bamatec equipment is available with us. Iijdpfef I Uumsx Ab Nsb

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Iiodpelf Ek Dsfx Ab Njb

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The MECA S4000 traysealer is an automatic packaging machine designed to ensure hermetic tray closure. Thanks to its high-performance sealing system, it effectively protects food products from air, moisture, and contaminants, while extending their shelf life. Indeed, this machine helps maintain food freshness and quality, making it an ideal choice for companies looking to improve their packaging processes. Furthermore, the MECA S4000 traysealer is designed for easy integration into various production lines. Furthermore, its versatility and quick tool changeover allow it to adapt to several tray formats, thus optimizing productivity. Furthermore, its ergonomic design and ease of use make it accessible to everyone, even less experienced operators. With easy maintenance and complete cleanability, this machine ensures high hygiene standards. In summary, the MECA S4000 is a robust and efficient solution for companies looking to improve their packaging processes while ensuring optimal product preservation. Iisdpfx Aou Nv Nrsb Nsb Technical specifications: Manufacturer: MECAPLASTIC Type: S4000 Year of manufacture: 2010 Speed (cycles/min): up to 6 Automatic Used machine. Pros: Sealing machine, easy to use. Quick tool change. Ergonomic operation. Complete cleanability. p3dpF1Eu

Condition: excellent (used), FDI manual punch press, Fredrich GmbH . Very good condition. Iodoum H Edjpfx Ab Neib

Year of construction: 1998, condition: ready for operation (used), A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible. Iiodpfx Ajy Hk S Reb Nob

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 200 mm, table width: 1,000 mm, table length: 2,000 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical press types operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety for large table and heavy die applications, thanks to their rigid frame construction. CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1000×2000 mm large table - Die/equipment protection with hydraulic overload safety - Controlled and user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection (LEUZE) - Fast production change-over with 99 die memory settings Areas of Application - Punching/cutting/forming applications requiring a large table - Serial production with automated feeding lines - Heavy-duty dies and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch–brake • Additional bolted T-slotted plate • 8-guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain protection • Enclosed oil reservoir with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety door at table front • Dies with custom specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Isdpjx N Ruqefx Ab Njib Max. shut height: 600 mm Min. shut height: 480 mm Side window dimensions: 600×600 mm Adjustment (ram adjustment): 120 mm Number of connecting rods: 2 pcs Number of eccentric shafts (cranks): 2 pcs Safety device: Hydraulic Switchgear brands: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 settings Mounting type: Floor standing Body type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.