Used Pre-Drawing Machine for sale (70,738)

Condition: used, Year of construction: 2006, Sodick AQ900L Premium Write-Cut EDM Machine, Serial No. 0006 (08.2006) LW33W Control, Travels: X = 900mm, Y = 600mm, Z = 400mm, U & V have the same displacement as X & Y, Max Workpiece Dimensions 1200 x 900 x 400mm Please Note: This Machine is located in Cheshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Please Note: There is a Strict Clearance date for this Auction of 16th September 2026. Psdozwnmdspfx Ab Ssgr

Condition: used, Hydromechanical, NC machine vise, VIS - HYDRAULIQUE Precision machine vise, spanner Type 20700 Year of manufacture approx. 2000 Jaw width 150 mm Jaw height 42 mm Clamping range 0 to 250 mm Opening width max. 253 mm Clamping force 6 tons Guide rail height 51 mm Guide rail length 450 mm - Hydromechanical machine vise Pjdpfx Ajzin Avob Sjgr - Quick adjustment with clamping ball lock in a hole grid, 8 positions - Sturdy base body, ground on all sides - Can be clamped horizontally, vertically, or laterally - Guide rail with 20 mm guide groove Dimensions L x W x H 480 x 150 x 107 mm Weight: 30 kg Good condition

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Pgodpfx Abezrptnj Sjr Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Year of construction: 1985, condition: ready for operation (used), Equipment: Base frame, pump drive, coolant system, central lubrication system, control panel channel, workpiece magazine, feeding unit, linear transfer system, hammer unit, stations I to IV, hammer unit HE0, station V, cutting tool, hydraulic feed unit VS29/200, version F and X, hydraulic control system, electrical control system, hydraulic oil capacity: 175 l, lubrication oil capacity: 60 l, operating hours: 55,349h. Documentation available. On site inspection is possible. Psdpfx Aezkvlnob Segr

Year of construction: 1985, condition: ready for operation (used), Equipment: Base frame, pump drive, hydraulic oil capacity, coolant system, lubrication oil capacity, central lubrication system, control panel channel, workpiece magazine, linear transfer system, hammer unit, cutting tool, hydraulic feed unit, hydraulic control system, electrical control system, operating hours: 77,107h. Documentation available. On site inspection is possible. Pgjdpfx Abezkvlho Sor

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Pjdsrmul Dspfx Ab Segr Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, functionality: fully functional, OMEC 450 Manual Drawer Joint Milling Machine – after technical inspection, ready for operation Specification: • Condition: Used, after comprehensive technical inspection • Manufacturer: OMEC • Total power: 1.1 kW • Max milling width: approx. 35 cm • Manual head feed • Pneumatic clamps – 4 pcs. • Overall dimensions: 90 x 60 x 128 cm (W x L x H) Additional information: • The machine is in good technical condition, ready for immediate use • Shown photos reflect the actual condition of the item for sale • Possibility to switch on and test the device on site • Free machine operation training (at the company headquarters) Pgedsy R Ewpjpfx Ab Ser • The price stated in the listing does not include VAT and transport costs Financing and transport: • We arrange transport via MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or lease loan

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Pedpfewbvmiox Ab Ssgr Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: excellent (used), Control system: Heidenhain TNC 124 Travel distances X/Y/Z: 450/260/120 mm Travel distance W: 450 mm Clamping area (L x W): 770 x 320 mm Permissible table load: 100 kg Distance table – spindle nose (min. – max.): 0 – 110 – 560 mm Feed rate X/Y: 1 – 2000 mm/min Tool – quick-change system: SF 32 Pgedpfxjipmmuj Ab Ssr Speed range, continuously variable: 100 – 9200 rpm Drive power: 5 kW Space requirement (W x D x H): 1500 x 1480 x 2330 mm

Year of construction: 1968, condition: used, Renz DPS Spiral Infeed Machine Psdsbq A D Repfx Ab Sogr Machine number: 50223

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Ram stroke, constant: 210 mm Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Ram adjustment: 100 mm Ram clamping area: 600 x 600 mm Pgsdpfx Aewy Sqzjb Ser Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Weight: 20 t

Condition: excellent (used), Year of construction: 1984, I sell the tenoning machine for drawer combs FOD Bydgoszcz DFPA-40 year 1984. Spindle length 220mm. Motor 7,6kW Made in Poland. Podpfx Aed Nzfisb Sogr

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Hydraulic table longitudinal movement: 650 mm Automatic transverse movement: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Grinding spindle power: 3.7 kW Spindle speed, frequency inverter max.: 2,100 rpm Machine bed: 780 x 750 mm MACHINE DETAILS Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg EQUIPMENT Pjdpezgux Sefx Ab Segr Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Enclosed splash guard with lighting Electronic handwheel

Year of construction: 1978, condition: used, pressure 40 t Pjdpfx Absq Rhkwe Sogr distance between columns 600 mm stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm table height 850 mm weight of the machine ca. 2,5 t

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides Pgodpfeh Uhq Djx Ab Ssr The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm Working height approx. 700 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one plate edge Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Pgsdpfezfimujx Ab Sjr Type LC 200 Jaw width 200 mm Base body type LC 160/200 Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2024, total height: 950 mm, total length: 880 mm, total width: 3,075 mm, type of input current: three-phase, DGUV certified until: 07/2027, Riehle Belma 2000 Icing Machine 3 icing curtains Stainless steel design, mobile with tilting device for rolls very robust technology DGUV V3 certified – only available from us Connection: 400V, 16A-CEE plug Dimensions: 3075 x 880 x 950 mm, L x W x H Used machine, cleaned & SAB inspected with warranty + spare parts service Pgjdpfx Abeyaf Eqe Ser Optional: Service package Maintenance contract Spare parts box Delivery service Training & commissioning We have other bakery machines in stock!

Year of construction: 1990, condition: good (used), machine/vehicle number: XXXX, Item No. 20314 Technical Data: Steel – Stainless steel – Aluminum – Plastic – Machining Deburring and chamfering process is performed with a milling cutter Support angle – Chamfer angle adjustable Chamfer angle adjustment 15 to 45° Pgsdpfx Aek H D Dfjb Sjr Chamfer width continuously adjustable from 0 to 7 mm Length of guide rail 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Approximate space requirement: W 650 x D 600 x H 950 mm Approximate weight 30 kg

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Pgodpjy Erzdsfx Ab Ssr Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: excellent (used), HEIDELBERG S B D 64 X 90 Heidelberg Cylinder S B D Paper Size 64 x 90 cm - Serial Number 34574 Psdpfx Abjzp Ri Ej Ssgr Converted for Die-Cutting Machine available immediately

Condition: used, Surface grinding machine, precision surface grinding machine BRAND (Switzerland) Type Mini 500 Machine No.: 505/86 Year of manufacture: 1986 Electro-magnetic clamping table 450 x 200 mm Grinding length 500 mm Grinding width 240 mm Cross travel 220 mm Table longitudinal travel 550 mm Distance between spindle center and magnet max. 350 mm Grinding wheel diameter 225 mm Grinding wheel width max. 25 mm Grinding wheel bore 50.8 mm Table longitudinal feed 0.5-24 m/min, stepless Table cross feed, pulse 0.05-30 mm Cross feed rate 10 - 1000 mm/min Vertical feed 0.001 - 0.05 mm Vertical feed rate 600 mm/min Grinding wheel speed 2820 rpm Pedpfx Aed Nrqfjb Segr Grinding wheel speed 33 m/s Motor power, grinding spindle 2.2 kW Motor power, hydraulics 1.1 kW Mains connection 400 V, 50 Hz, 9.5 kVA - automatic depth feed, vertical feed - mechanical handwheels for axis movements - hydraulic table longitudinal movement - electromagnetic plate WAGNER 450 x 200 mm, height 73 mm - central lubrication system - band filter system with coolant tank and pump, adjacent, L x W x H = 1300 x 500 x 650 mm - 2 additional grinding wheel arbors for grinding wheels with 50.8 mm inner diameter - 1 balancing mandrel and 1 grinding wheel puller - adjacent hydraulic unit, L x W x H = 700 x 300 x 750 mm Space requirement L x W x H 2000 x 1400 x 2250 mm Weight approx. 1600 kg Good condition

Condition: ready for operation (used), 2 units available. Podpjzuz R Refx Ab Sogr For sale is a high-quality GARANT LCV 125 G chuck for professional use on CNC machining centers. This chuck impresses with its high clamping force, precision, and optimal accessibility, making it ideal for 5-axis machining as well as complex milling operations. Technical features: Manufacturer: GARANT Type: LCV 125 G Jaw width: 125 mm High clamping force with a compact design Precise workpiece positioning Ideal for 5-sided and 5-axis machining Robust industrial design Advantages: High repeatability Optimal accessibility for milling tools Reduced setup times Safe and vibration-dampened workpiece clamping Suitable for single-part and series production Condition: Used, fully functional. Normal signs of wear from industrial use.

Condition: good (used), Year of construction: 1985, functionality: fully functional, HDB CORD Year of manufacture: 1985 Pedpfx Abozrvivj Segr Standard equipment

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, Caustic soda dosing machine Drautz RD 100 Compact and robust design One-person operation and easy cleaning Dual-curtain caustic soda application With stripping device Connection 400V, 16A-CEE plug Used machine With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Optional: Maintenance contract Service package Salting Delivery service Spare parts box for added security Training & commissioning Pgsdpfsxmrbdex Ab Sjr Visit our wide selection!

Condition: used, Thrust: 600 TON. Barbed points: no. 2 Model: AF 600 MB 30-60 Year of construction: 1994 Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Front passage: 3,000 mm. Pjdpfxeq N Etts Ab Sogr Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Weight: 110 ton.