Used Reis Tus115 Ok-100 for sale (26,225)

Condition: used, Manufacturer: Heraeus Fgsdpfx Akjz I Rbiomjh Model: NTU 100/50 Max. temperature: 250°C Internal dimensions: 1000 x 1500 x 1000 mm Weight: 690 kg

Condition: like new (used), Year of construction: 2016, IVECO EUROCARGO 100-19, year 2016, Euro 6, 330,000 km, refrigerated body, dimensions 5.80 x 2.25 x H2.30 (internal measurements), movable partition wall, dual evaporator, Carrier Supra 850 refrigeration unit, ATP FRC -20°, valid until 03/2028, independent diesel operation, DHOLLANDIA tail lift, air conditioning, manual transmission. Financing or leasing options available on-site. Fedpfsz Ny H Ssx Akmjgh

Year of construction: 2026, condition: new, 1 x AK Ramon double chamber vacuumn packer with gas facility. Model - VP-700 TB 100 Fedpfsz A Dk Tsx Akmogh Year of manufacture 2026

Condition: used, Digital overpressure measuring device Digibar Fgjdjcf Rb Tjpfx Akmjh suitable for measuring static and quasi-static liquid and gas pressures. PE 100 is the battery-powered version.

Condition: used, Year of construction: 1996, Table 1250 x 800 mm X/Y/Z - 1000/800/500 mm Spindle speeds 15.000 rpm Spindle taper SK 40 No. of stations in tool changer 24 Control: Grundig dialog 112 Equipped with: Fjdpfoz D Smljx Akmjgh 12 tool holders 1 vice

Condition: excellent (used), Scanning head (28260) Manufacturer: Heidenhain Fedpfxeh D Ry Ns Akmjgh Type: LIDA 20/100

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge Fgjdpfoy Ipbmox Akmjh 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Fjdpfx Aeu N E Htekmjgh Both pumps = 7.5 kW Weight 164 kg *

Condition: used, maximum load weight: 2,641 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2025, Year of construction: 2025, Henra MT 353517 Machinery Transporter for construction equipment, etc. – new New, immediately available from stock. Permissible gross weight 3500kg. Transport area 3500 x 1700mm. Standard features include: * Bolted tubular drawbar with 2 different heights for overrun brake installation * Recessed lashing hooks in V-grooves in the loading area * Very low loading floor for easy driving on and off * 115 cm long loading ramp with sturdy drive-on aid and adjustable spring system * Loading ramp equipped with a robust and practical rotary latch (prevents tailgate rattling) * Heavy-duty bucket holder, also serves as a spare wheel bracket * Integrated LED side marker lights in side rail * LED front lights and LED contour lights * Sealed front section with tubular frame * Heavy-duty 18 mm plywood/wooden floor with anti-slip surface Fgodsz Hd Adspfx Akmjh * Wheels 185/60R12 * Approved for 100 km/h * Despite the utmost care, errors in this listing cannot be excluded. We reserve the right of prior sale and to make changes!

Condition: excellent (used), Year of construction: 2018, VPS 100/2500 cardboard cutting machine – fully functional Fully automatic production of outer packaging from continuous cardboard Application: Packaging of high-quality aluminum rims with precisely fitting packaging to prevent slipping Working width: up to 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.5–7 mm Tool width: approx. 45 mm Operating hours: 13,072 in a single-shift operation Accuracy: Longitudinal cuts: ±0.2 mm Length tolerance: ±1.5 mm/m Packaging size: 600 × 600 × 300 mm Output: approx. 55 s per packaging unit Bottom/lid construction Production of individual packaging for exclusive forged wheels. Bottom with corner locks to hold the rim upright Lid according to FEFCO 0331 If required, development of tightly fitting packaging concepts in consultation with the customer Packaging design Integrated software for creating your own packaging designs Database with approx. 250 packaging designs The machine processes continuous cardboard fully automatically. The patented multi-tool performs creasing, scoring, perforating, and cutting using the single-point principle. The material-friendly creasing technology prevents the cardboard from splitting. Perforations are performed using an oscillating knife with a freely adjustable perforation level. Cuts are made with a toothed knife on a rubberized roller, creating clean, fiber-free cut edges. All tools are adjustable by servomotor. Machine construction Welded construction 6 multi-function tools for longitudinal processing (optional up to 12) 1 transverse processing tool 2 rubberized rollers Segment-controlled overpressure Control: Industrial PC Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) Windows 10 IoT Enterprise Beckhoff TwinCAT 3 21" multi-touch panel Control cabinet integrated Software functions: Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Monitoring of residual lengths Production data acquisition (CSV) Plain text error messages Automatic cardboard changer Automatic selection of the optimal cardboard web width. Standard with two positions, expandable to six or, with side-by-side function, to up to twelve web widths. Additional cardboard magazines expand the system with additional web widths and have their own sensors and residual length management. Box designer Programming software for customer-side workstations for the free creation and programming of individual cardboard designs. General condition The system is in good overall optical and technical condition. The machine cladding, safety devices and conveyor components are complete and intact. No visible damage, corrosion or significant signs of wear can be detected. Fjdszmbi Djpfx Akmegh Maintenance performed internally by the company via SAP-PM Every 6 months electrically Every 3 months mechanically

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: NE100230E50133, protection type (IP code): IP55, overall weight: 2,100 kg, input voltage: 400 V, belt width: 950 mm, STEINERT NE 100 220 E50 Eddy Current Separator | Non-Ferrous Metal Separator | Fully Refurbished Fodpezd Srwsfx Akmjgh For sale: a STEINERT eddy current / non-ferrous metal separator, type NE 100 220 E50, used for recovering non-ferrous metals (aluminum, copper, brass, etc.) from bulk material streams such as shredder residue, Zorba/shredder NE-mix, slag, or similar feedstocks. The unit has been fully refurbished – new conveyor belt, new control system – and is in excellent, ready-to-run condition (see photos). Solid steel frame base, compact footprint, available immediately. Technical data: Manufacturer: STEINERT Elektromagnetbau Type: NE 100 220 E50 Feed width: 950 mm Belt speed: 0.5–2.0 m/s (mechanically adjustable via handwheel) Belt drum drive: 2.2 kW, IP 55 (variable gearbox IP 44) Magnet system drive: 4.0 kW, IP 55 Magnet system: fixed field frequency, adjustable up to 45° Particle size range: 5–140 mm (version E5013: 5–100 mm / E5005: 25–140 mm) Rated throughput (datasheet): approx. 10 m³/h Field-tested throughput: Zorba / shredder NE-mix 20–100 mm: approx. 5–8 t/h light, loose material: approx. 3–6 t/h heavy, uniform material: approx. 8–12 t/h Protection class (overall unit): IP 55 Permissible ambient temperature: -10 °C to +35 °C Total weight: approx. 2,100 kg Condition: fully refurbished – new belt, new control system

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. Fgsdpfxezuuimo Akmsh * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Brand: ALESAMONTI Model: MCS-100 Category: CNC Boring Machine Year of manufacture: 2010 CNC Control: HEIDENHAIN TCN-530M Machine weight: 17,500 kg Fgedpsz Iappjfx Akmeh Machine Dimensions Length: 4,500 mm Width: 4,200 mm Height: 3,700 mm Spindle Boring spindle diameter: Ø 100 mm Spindle nose: ISO-50 Tool holder type: DIN 69871 A50 Gear range change: Automatic, 2-speed Maximum spindle speed: 3,000 rpm Spindle motor power: 22 kW Spindle support: 350 mm Spindle extension support included Axis Travels X-axis – Longitudinal: 2,500 mm Y-axis – Vertical: 1,500 mm Z-axis – Transverse: 1,500 mm W-axis – Quill travel: 600 mm B-axis – Table rotation, continuous: 360° Minimum B-axis increment: 0.001° Rotary Table Usable table dimensions: 1,550 × 1,300 mm T-slots: No. 9 – 140 × 22 mm H7 Maximum permissible load: 5,000 kg Table rotation (B-axis): 360° continuous Angular resolution: 0.001° Feed Rates Working feed rates for axes X / Y / Z / W: 20,000 mm/min Rapid feed rates for axes X / Y / Z / W: 15,000 mm/min Measuring Systems HEIDENHAIN optical scales on linear axes Rotary encoder on the table Measuring system for axis positioning control Coolant and Chip Management Coolant collection tank Chip conveyor External washing pumps Coolant pump through the spindle Air system through the spindle Accessories 350 mm spindle support Spindle extension support Various ISO-50 tool holders Square Magnetic chuck Chip tank and conveyor External washing pumps Coolant system through the spindle Air system through the spindle HEIDENHAIN scales on linear axes Rotary encoder on the table Documentation Machine manuals Electrical diagrams CE Declaration of Conformity Main Features ALESAMONTI MCS-100 CNC Boring Machine HEIDENHAIN TCN-530M Numerical Control Ø 100 mm boring spindle ISO-50 spindle mounting Automatic 2-speed gear change Maximum spindle speed 3,000 rpm Spindle power 22 kW X-axis travel of 2,500 mm Y-axis travel of 1,500 mm Z-axis travel of 1,500 mm W-axis quill travel of 600 mm 1,550 × 1,300 mm rotary table Table load capacity up to 5,000 kg Table rotation 360° continuous Table resolution 0.001° HEIDENHAIN scales on linear axes Rotary encoder on the table Coolant and air through the spindle Chip conveyor and washing system Complete with ISO-50 tool holders, square, and magnetic chuck Complete with manuals, electrical diagrams, and CE Declaration.

Condition: ready for operation (used), Year of construction: 1992, Arburg Dryer Fedpfxowuvg Nj Akmogh Thermolift 100 100 L Year of manufacture 1991, 1992

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Fsdpovx N Shefx Akmsgh Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: used, Year of construction: 1998, Serial No. 174520, control unit, manufacturer Arburg, closing force 400 kN, screw diameter 20 mm, sprue picker, manufacturer TecnoMatic, type micro cnc, vacuum separator, manufacturer Piovan, type DPA20, year of manufacture 2016, microprocessor control, 2 temperature control units, internal numbers 14 and 19, F, drying cylinder, desiccant dryer, manufacturer Piovan. Fgodpfxjz Hl H Re Akmeh

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass, or a drying container with an air volume that you set yourself, instead of running a fan at full speed and paying for it. This Karl Barth AG Ventomat SE-1-100-4p was purchased in December 2025 and used for approximately four months. It operates perfectly and is offered as a complete, ready-to-use system, not just the fan: it includes a factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reduction, plus a free 10m Ø400mm fabric hose. The original purchase price was approximately CHF 8,507. Only one unit is available – sold as a complete set with the inverter, ducting accessories, and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers, and agricultural ventilation where you want to control air volume rather than running at full speed. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specifications mean in practice: • 5.5 kW motor, 4 kW rated fan output – sized for continuous hay/biomass drying, not short bursts. • Factory-configured Invertek Optidrive E3 inverter – set the air volume to match the crop and its moisture content, reducing energy consumption. • Inverter in IP66/NEMA4X housing with disconnect switch – can be mounted in a dusty barn without a separate control cabinet. • Duct cone 222/563 to D400mm and D750/D600mm reduction – connects to existing ducting, eliminating the need for custom fabrication. • 10m Ø400mm flexible fabric hose included – place the fan where it fits, and duct air where needed. • Painted sheet metal, single-suction Swiss-made (Karl Barth AG) – serviceable and locally supported. The complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reduction D750/D600 with flange ring, and a 10m Ø400mm fabric hose, all at no extra charge. Purchasing/configuring the inverter alone is a significant separate expense. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP – Duct connection: 222/563mm to D400mm, plus D750/D600mm reduction Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 incl. VAT. Location: Stanserstrasse 50, 6064 Kerns (self pick-up; transport can be arranged). Buy with confidence: purchased in Dec 2025, used for ~4 months for hay drying/drying container, technically flawless. The inverter can be demonstrated running under load; photos of the nameplate and a video of it running are available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as one complete set – fan, inverter, cone, reduction, and hose stay together. Once sold, this configuration will not be available again at this price. Fsdpszrzizsfx Akmsgh First-buyer bonus: free functional test with the inverter under load, plus loading assistance, at no extra cost. Valid until October 10, 2026, or until sold. Action: send your intended application, required capacity, and destination – we'll confirm suitability and provide a transport estimate.

Condition: new, weight max. 100 t Fgsdpsfv A Elofx Akmoh workpiece diameter 1000 - 6300 mm drum diameter 500 x 240 mm feed 100 - 1000 mm/min total power requirement 7,5 kW

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 Fjdpfxsz H Aw Ho Akmegh Elektrischer Eckenrunder / Electric Corner Rounder Pescha EK 100 mit 3 Werkzeugen / with 3 Set of Blades Serial-No. 202 076 Geschwindigkeit / Speed max. 50 cycles/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- Fgodpfx Aoz Hcz Sskmoh HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: excellent (used), Year of construction: 2009, Arburg 370S 700-100/100 / 2K machine / operating hours: 33.544 in automatic mode / very good technical condition Year of manufacture: 2009 injection unit: Screw diameter: 30 mm injection weight: 65 g Injection pressure: 1390 bar Metering volume: 71 ccm Clamping unit: clamping force: 70 t tie bar distance: 370x370 mm size of clamping platens: 510x510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: 2K machine Operating hours: 33.544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Machine with the built-in conveyor belt Arburg and original sorting flap There is a possibility to buy an original Weber turntable It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer Dimensions: Weight: 4440 kg Length/width/height: 3.48x1.58x2.97 m Drive: Pumps/motor: 15 kW Fgjdpfx Akoz Iq A Tomeh Heating power: 4,9 kW Total power: 19,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2006, condition: like new (used), Zum Verkauf steht ein hochwertiger Posten pneumatischer Industrie-Zylinder des Herstellers SMC. Gesamtmenge: 5 Stück Serie: C92 (ISO-Standardzylinder) – robuste Heavy-Duty Ausführung – geeignet für höhere Kräfte und industrielle Anwendungen – standardisierte Bauform (ISO), universell einsetzbar – kompatibel mit gängigen Ersatzteilen und Dichtungen Die Zylinder stammen aus industrieller Anwendung und wurden fachgerecht demontiert. Optischer Zustand gut, mechanisch intakt wirkend. Eine vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Industrieautomation – Maschinenbau – Produktionsanlagen – Wartung und Ersatzteilversorgung ISO-Standardzylinder der SMC C92 Serie sind weit verbreitet und langfristig verfügbar. Neupreis vergleichbarer Einheiten: ca. 250–450 € pro Stück. Sehr interessanter Posten für Industrie oder Handel. Verkauf vorzugsweise komplett als Set. Preis: 790 € VB Standort: Slowakei (EU) Versand europaweit möglich 🇬🇧 PREMIUM VERSION For sale: high-quality lot of pneumatic industrial cylinders by SMC Total quantity: 5 units Series: C92 (ISO standard cylinders) – heavy-duty industrial design – suitable for higher force applications – standardized ISO construction (universal compatibility) – spare parts and seals readily available The cylinders originate from industrial application and were professionally dismantled. Good visual condition, mechanically appear intact. Full functional testing has not been performed. Suitable for: – industrial automation – machinery – production lines – maintenance and spare parts SMC C92 ISO cylinders are widely used and remain standard in industrial systems. Estimated new price: approx. 250–450 € per unit. Very attractive lot for industrial users or resellers. Preferably sold as a complete set. Price: 790 € negotiable Location: Slovakia (EU) Fsdpfey Nf Dmox Akmogh Worldwide shipping available

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 Fedpfx Aez Ipi Sskmegh 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Bizerba GLM-I Evo 1T1B machine after a general overhaul. With the installed licenses as per the attached list: Installed licenses: Upper labeling unit (Master): [+] ONLINE [+] BRIDGE+MC_BUFFER [+] ETHERNET [+] SOFTCONTROL_1 [+] WS_FOOD [+] STATISTICS [+] WEIGHT_CLASSES [+] CODE_PART_PRINT [+] EURO [+] LOADABLE_FONTS [+] KEY_LOCK [+] 2D_CODE [+] PLUGIN_LABEL Lower labeling unit (Slave): [+] ONLINE [+] ETHERNET [+] CODE_PART_PRINT [+] EURO [+] LOADABLE_FONTS [+] KEY_LOCK [+] 2D_CODE [+] PLUGIN_LABEL Fgjdpfxoz Nlp Ee Akmsh

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 3,400 mm, total width: 1,650 mm, total height: 2,550 mm, overall weight: 6,000 kg, Equipment: CE marking, ORMA NPC 6/100 Veneer Press Shelf length: 2500 mm Shelf width: 1300 mm Number of loading cycles: 3 Automatic pressure increase Fedpfx Aoz Nvd Tokmegh Safety cable (“breakaway” cable) Hydraulic press with heating via water from the central heating system Working pressure: 350 bar Press with 6 cylinders Cylinder diameter: 85 mm CE certified Machine dimensions: 340x165x255 cm (H) Machine weight: 6000 kg