Used Weipert Vario 180 V for sale (40,156)

Year of construction: 2022, condition: new, New! Roof cutout dimensions: 2,350 x 13,000 mm Godelrtdbopfx Afujkc Light panel order dimensions: 2,550 x 13,311 mm

Condition: used, mileage: 150,351 km, power: 100 kW (135.96 HP), first registration: 01/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Equipped as a bus (group transport vehicle) with a raised roof, full air conditioning, auxiliary heater, ABS, driver airbag, and a differential lock on the rear axle, as well as a retarder – an electrically powered, wear-free eddy current brake for speed adjustment. The body only has minor surface rust on the lower edges of the sills – no holes are present. Gsdpszmqnpjfx Afujkc There is a slight bulge on the rear wheel arch, but this is not relevant for the TÜV (technical inspection). Technically, this Vario is in excellent condition and does not require any immediate repairs – it has been consistently maintained according to the service schedule. We have already replaced both starter batteries, and before the sale, we will replace the windshield with a real glass one, making it suitable for private registration. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. The air conditioning and auxiliary heater are functional and very effective: 1) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2) The auxiliary heater is a hot water circulation heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to documentation: 120 km/h. A total of 11 seats, with the seats in the passenger compartment designed as reclining armchairs – with adjustable backrests and armrests. Furthermore, the left inner seats can be moved forward by approximately 10 cm on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH). For an additional charge of €750, we can carry out a technical modification to convert it into a camper van by removing some seats. Due to space constraints, a maximum of 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. +++Errors, changes, and prior sale are subject to change.

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm Gsdjxaau Ejpfx Afuokc turning speeds 25-220/220-1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 185 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2420 kg. range L-W-H 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change tool holder with 4 inserts - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: like new (used), operating hours: 12 h, KILIA 65 Liter Meister Plus – factory-reconditioned by HELTEK | KILIA For sale is a KILIA 65-liter high-speed cutter / Meister Plus, which undergoes complete factory reconditioning at HELTEK | KILIA. This is not a simple repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently aligns with the current machine standards of HELTEK | KILIA. The 65-liter cutter is ideal for butcher shops, meat processing plants, and industrial food processing operations. Technical data: Manufacturer: KILIA Model: Meister Plus / High-speed cutter Bowl capacity: 65 liters Batch processing capacity: approx. 46 kg per batch Main motor: 22 kW Knife shaft speed: approx. 50–5,100 rpm Reverse / mixing speed: approx. 50–500 rpm Plate speed: approx. 7–20 rpm Knife and plate drive: continuously variable, frequency-controlled Voltage: 400 V / 50 Hz Total electrical connection power: approx. 28 kW Customer-side fuse: 50 A Control: modern PLC Operation: 7-inch HMI touch panel Central lubrication: yes Scope of the HELTEK | KILIA factory reconditioning The machine is completely disassembled, except for the base frame. As part of the reconditioning, the following work is carried out, among other things: new base plate, professionally welded in machine frame completely refurbished and blasted stainless steel areas refurbished or glass bead blasted base frame with high-quality new powder coating 22 kW main motor new or completely overhauled and certified by Siemens new motor tensioning device made of stainless steel plate shaft drive new or completely overhauled and certified by the manufacturer plate shaft bearing completely new new bearings and new bearing seats for the plate shaft bearing new knife shaft new knife shaft bearing new electronic central lubrication system new wear parts new scrapers, guides and sliding elements made of food-grade blue POM electrical system and control completely new The electrical equipment is also comprehensively modernized: new PLC control new 7-inch HMI touch panel new frequency inverters new contactors and relays new cables and wires new or revised sensors modern safety technology complete rewiring Gkodpfxjz A Ufze Afuoc This gives the machine modern control and drive technology with good spare parts availability and high serviceability. Factory-reconditioned instead of just used You will receive the extremely robust basic structure of a proven KILIA cutter, combined with modern control, drive and safety technology. Proven KILIA quality. Modern HELTEK technology. Ready for many more years of production. After completion of the factory reconditioning, the machine is completely inspected and subjected to a FAT – Factory Acceptance Test. Warranty We provide a 6-month warranty on the factory-reconditioned machine in accordance with our terms and conditions. The knife shaft bearing is excluded from the warranty. Inspection and machine acceptance / FAT can be arranged at HELTEK | KILIA. Transportation, installation and commissioning can be offered on request.

Condition: new, bore capacity in steel (diameter) 16 mm throat 185 mm bore stroke 50 mm 20 mm spindle taper MK 2 spindle diameter mm spindle turning speed range 100-1500 / 200-3000 U/min 175 mm 280 mm table surface area 500 x 180 mm connected load frequency 230 V total power requirement 0,85 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 0,86 x 0,6 x 0,9 m Drilling and milling machine Gkedpjurznwofx Afuec - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 Gkjdpfx Afszrpr Deujc with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: excellent (used), Vötsch VC³ 7018 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7018 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 190 liters For sale is a used Vötsch VC³ 7018 climate testing chamber for performing temperature and climate tests. The unit is suitable for environmental simulation, material testing, Godpfx Aezm Ni Eofuskc quality assurance, electronics testing, and research and development. Before delivery, the device was inspected in our workshop, the heating, cooling, and humidity functions were tested, and the humidity wick was replaced. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7018 Test Chamber Volume: approx. 190 liters Test Chamber Dimensions (W × D × H): approx. 580 × 450 × 750 mm External Dimensions (W × D × H): approx. 875 × 1,545 × 1,805 mm Weight: approx. 460 kg Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 4 K/min Temperature Change Rate (Cooling): approx. 3 K/min Humidity Range: 10 to 98 % RH Climate Range: +10 °C to +95 °C Power Connection: 3/N/PE AC 400 V / 50 Hz Rated Power: 4.9 kW Rated Current: 14 A Refrigerant: R404A (2.5 kg) Refrigerant: R23 (0.75 kg) Operating Hours: 35,800.6 h Equipment: Touch Panel Control Programmable Controller Temperature and Humidity Control Stainless Steel Test Chamber Viewing Window with Interior Lighting LAN/Ethernet Interface Air-Cooled Refrigeration System Test Protocols Operating Manual Accessories as shown in the pictures Application Areas: Temperature Testing Climate Testing Environmental Simulation Material Testing Electronics Testing Quality Assurance Research and Development Condition: Used Workshop Checked Optical condition as shown in the pictures. Scope of Delivery: Vötsch VC³ 7018 Climate Testing Chamber Test Protocols Operating Manual Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: new, grinding wheel diameter 250 mm connected load frequency 230 V 90 - 180 U/min weight of the machine ca. 18 Kg dimensions 470 x 300 x 440 m Knife sharpening device with variable speed Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm Gjdpfxjupxhce Afujkc

Condition: used, Year of construction: 2003, Zusammentragmaschine / Broschürenfertigung Watkiss - SlimVac Vario 10 Booklet Maker / Brochure Finishing Watkiss - SlimVac Vario 10 Zusammentragmaschine / Gatherer Watkiss SlimVac Vario 10 collator Baujahr / Year 2003 - Serial-No. ASF 1092 Format / Size min. 120 x 160mm Format / Size max. 364 x 520mm Paper weight: 40 to 240 gsm. Gedstpkwyjpfx Afuskc Geschwindigkeit / Speed 2.500 - 5.000sets/hr. Auslage / Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Vötsch VC³ 4018-M climate testing chamber for leather goods, -40 °C to +180 °C, 190 l, 10–98 % RH, Vaisala and SIMPATI® Modified special version for leather testing Temperature range: -40 °C to +180 °C Test chamber volume: approx. 190 liters Humidity range: 10–98 % RH Cooling: water-cooled For sale is a used Vötsch VC³ 4018-M climate and temperature testing chamber with humidity function. The device is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Special version "-M": Gkjdpfxezna N Ee Afuoc The model suffix "-M" designates a modified version for testing leather and leather goods. Extended climate range up to +120 °C at 10 % RH. Capacitive Vaisala humidity measuring system Compressed air connection / GN2 K3000 3.5-inch touch panel instead of the standard 8-inch panel Touch panel in the test chamber door Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018-M Test chamber (W × D × H): approx. 580 × 450 × 750 mm External dimensions (W × D × H): approx. 870 × 1,550 × 1,800 mm Weight: approx. 470 kg Heating: approx. 4 K/min Cooling: approx. 4 K/min Max. heat compensation: approx. 2,300 W Temperature deviation: ±0.1 to ±0.5 K Temperature homogeneity: ±0.5 to ±1.5 K Climate data: Standard climate range: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity deviation: ±1 to ±3 % RH Heat compensation, climate operation: approx. 400 W Special climate range for leather testing: up to +120 °C at 10 % RH Refrigeration and connection data: Refrigerant: R404A, filling quantity: 1.6 kg ND max.: 22.5 bar g, HD max.: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW, rated current: 14 A Equipment: 3.5-inch ControlPad Vaisala humidity measuring system Compressed air connection / GN2 K3000 Connection for demineralized water Viewing window and stainless steel test chamber Test chamber lighting 2 × 24 V / 50 W Cable glands Ø 125 mm and Ø 50 mm 3 insert racks SIMPATI® software version 2016 with 2 device licenses Certificate of authenticity and original operating manual Test documents and accessories as shown in the pictures Condition and scope of delivery: Used, optical condition as shown in the pictures. Scope of delivery: Vötsch VC³ 4018-M, 3 insert racks, operating manual, SIMPATI® license documents, certificate of authenticity Accessories as shown in the pictures. Items not explicitly mentioned are not included in the offer. Shipping by freight forwarder possible by arrangement. Subject to change, errors and prior sale.

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Thread cutting max.M42 Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Gkodpjrivbvefx Afujc Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Working surface base plate 435 x 445 mm Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Digital drilling depth display Height-adjustable protective cover

Year of construction: 2018, condition: used, current intensivity 400 A weight of the machine ca. 125 kg dimensions of the machine ca. 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 IP protection class 23 Gkedpfenf Ir Asx Afusc Insulation class H

Condition: used, mileage: 141,000 km, power: 90 kW (122.37 HP), first registration: 07/1998, fuel type: diesel, overall weight: 5,990 kg, gearing type: mechanical, emission class: euro2, Year of construction: 1998, * Mercedes Benz Vario 612 D beverage truck * First registered: 07-1998 * Manual transmission * Leaf spring suspension Gksdpozx Nurefx Afujc * 3 seats * More pictures and videos available via WhatsApp * Information provided without warranty and subject to prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: WDB6703231N090712, mileage: 242,000 km, first registration: 04/2000, fuel type: diesel, empty load weight: 4,320 kg, maximum load weight: 3,170 kg, overall weight: 7,500 kg, tire condition: 85 %, axle configuration: 4x2, wheelbase: 4,300 mm, next inspection (TÜV): 09/2027, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, suspension: parabolic leaf (spring), number of seats: 2, total length: 7,200 mm, total width: 2,500 mm, total height: 3,300 mm, loading space volume: 27.5 m³, loading space length: 5,100 mm, loading space width: 2,450 mm, Year of construction: 2000, operating hours: 242,000 h, Equipment: ABS, cruise control, tachograph, tail-lift, I have a Mercedes Benz Vario 814 truck for sale, in good condition. Godpfxezxzd So Afuekc Original mileage, ZEPRO 1.5t loading lift, tow hitch. Please contact me directly via WhatsApp.

Condition: used, mileage: 147,717 km, power: 100 kW (135.96 HP), first registration: 04/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Configuration as a bus (group transport vehicle) MR / high roof with full climate control and auxiliary heater, ABS, driver airbag, and differential lock on the rear axle, as well as a retarder, which is an electrical, wear-free eddy current brake for adjusting the speed. Before sale, the windshield will be replaced with real glass. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. Furthermore, before sale, the bases and deflector shields of the former roof-mounted rotating lights will be removed from the roof. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Also, before sale, we will dismantle the rear wooden cabinets. This also creates space for a motorhome interior. Technically, this Vario is in good condition and does not require any immediate repairs; it has been consistently maintained according to the service schedule. During the last service, the engine oil pan was also replaced. All components such as the engine, transmission, and rear axle are dry. The air conditioning and auxiliary heater are functional and very effective: 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulating heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to the vehicle registration document: 120 km/h A total of 11 seats, the seats in the passenger compartment are designed as reclining seats - with adjustable backrests and armrests, and the left inner seats can also be moved approximately 10 cm forward on the console to provide more room for movement. A total of three effective roof vents. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH) For an additional charge of €750, we can carry out a technical modification to convert the vehicle into a motorhome by removing some seats. Due to space constraints, up to 8 seats are possible. Gjdpfszr Ayhex Afuekc In this context, the Vario will also receive a 220V external power connection. However, the Vario would also be roadworthy without these body modifications; it drives well, and the transmission shifts precisely. +++ Errors, changes and prior sale are reserved.

Condition: excellent (used), Vötsch Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With temperature change rate of 5 K/min Gjdjziyx Nspfx Afujkc Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation in the center of the usable space: ±1% to ±3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) Exterior dimensions (W x D x H): 870 x 1700 x 1775 mm Test chamber dimensions (W x D x H): 580 x 765 x 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm and 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-side fuse: 63 A slow-blow Refrigerant: R404A / R-23 Weight approx. 570 kg For your security as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) Further questions can be answered by phone.

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: Gkjdpfx Aszizl Defusc 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Vötsch VCS³ 7034-5 Climate Chamber / Temperature Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Machine Type: Climate Chamber / Temperature Chamber Test chamber volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate chamber with water cooling and a temperature change rate of 5 K/min. The test chamber is suitable for professional temperature and climate tests, environmental simulation, material testing, quality assurance, electronics testing, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Test chamber volume: approx. 335 liters Temperature range: -70 °C to +180 °C Temperature change rate heating: approx. 7.0 K/min Temperature change rate cooling: approx. 6.7 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg Maximum system pressure (ND max.): 21 bar(g) Maximum head pressure (HD max.): 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site fuse: 63 A slow-blow Dimensions: External dimensions (W × D × H): approx. 870 × 1,700 × 1,775 mm Internal dimensions / test chamber (W × D × H): approx. 580 × 765 × 750 mm Weight: approx. 570 kg Equipment: S!MPAC control Touch panel operation Stainless steel interior Temperature and humidity control Ethernet interface Godpfxjzpihas Afuekc USB interface Cable gland 50 mm Cable gland 125 mm Test specimen protection function Accessories as shown in the pictures Shipping data: Dimensions (W × D × H): approx. 870 × 1,700 × 1,775 mm Weight: approx. 570 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Vötsch VCS³ 7034-5 climate chamber Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: new, Year of construction: 2026, CORMAK Z5020 BF Vario Column Drill Press is a versatile and modern metal drilling machine designed for intensive operation in industrial plants, locksmith workshops, and maintenance departments. The machine provides excellent stability, precision, and high working comfort thanks to stepless spindle speed adjustment and an ergonomic design. Main advantages of the machine Stepless spindle speed adjustment – a range of 190–2700 rpm allows optimal adjustment of parameters to the type of material being processed. Rigid machine body construction – minimizes vibrations and improves drilling accuracy. Height-adjustable worktable – precise rack adjustment and the possibility of tilting within a range of ±45°. Electronic speed indicator – provides real-time control of drilling parameters. Laser pointer and LED lighting – facilitate tool positioning and improve visibility of the working area. 100 mm machine vice included – the machine is ready for operation immediately after setup. Construction and technology The CORMAK Z5020 BF Vario column drill press is equipped with a stable 70 mm diameter column and a wide 480 × 290 mm base, ensuring excellent support and rigidity of the entire structure. The standard MK2 spindle features a 120 mm stroke, allowing deep drilling without the need to reposition the workpiece. The worktable design enables rotation and tilting, allowing the operator to precisely adjust the position of the workpiece according to the machining operation. Precision and work efficiency The powerful 750 W motor and maximum drilling capacity of 20 mm enable effective machining of most metal materials. The electronic speed indicator and drilling depth stop provide full control over the process. The long column and large table height adjustment range (660 mm) allow machining of taller workpieces and the use of tools with larger reach. Applications The Z5020 BF Vario model is a metal column drill press recommended for: mechanical and locksmith workshops, maintenance departments, light and medium industry, prototype work and single-piece production. Standard equipment 100 mm machine vice Laser drilling pointer LED work light Electronic speed indicator Three-arm spindle feed lever Drilling depth stop Worktable with rack height adjustment Technical specifications Parameter Value Maximum drilling diameter 20 mm Spindle speed range 190–2700 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 120 mm Spindle-to-column distance 170 mm Spindle-to-base distance 1060 mm Table height adjustment range 660 mm Column diameter 70 mm Gsdpfx Asvuf Ikjfuekc Table dimensions 280 × 280 mm Base dimensions 480 × 290 mm Motor power 750 W Machine height 1650 mm Weight 75 kg

Condition: new, Year of construction: 2026, CORMAK TYTAN 210 × 400 VARIO Universal Conventional Lathe (230 V) The CORMAK TYTAN 210 × 400 VARIO 230 V is a compact universal conventional metal lathe designed for precision machining in workshops, toolrooms, maintenance departments, and small manufacturing facilities. Featuring infinitely variable spindle speed control, a rigid machine construction, and extensive threading capabilities, it delivers excellent machining accuracy and everyday operating convenience. It is a reliable conventional lathe suitable for single-piece production, maintenance work, and prototype manufacturing. Powered by a 750 W motor combined with an electronic variable-speed drive, the machine provides smooth and stable performance even when machining demanding materials. The spindle speed range of 50–2,500 rpm allows operators to select the optimum cutting speed for both rough turning and precision finishing operations. Key Features Infinitely variable spindle speed from 50 to 2,500 rpm 750 W / 230 V motor providing smooth and reliable operation Rigid machine construction for high machining accuracy 4-way tool post for quick and convenient tool changes Capability to cut both metric and imperial threads MT3 spindle taper with 21 mm spindle bore Forward and reverse spindle rotation for increased versatility Hinged spindle safety guard for improved operator protection Integrated chip tray for easy cleaning and maintenance Standard Equipment 3-jaw self-centering chuck Internal and external chuck jaws Change gears for thread cutting MT2 dead center Oil can Chip tray Gkodpozqzi Eofx Afuoc Chuck key and tool post wrench Open-end wrenches and hex keys Spare fuses Operating manual CE Declaration of Conformity Optional Equipment Lathe stand 4-jaw independent chuck Tool holders Live centers Turning tools Tailstock drill chucks Technical Specifications Specification Value Swing Over Bed 210 mm Swing Over Cross Slide 135 mm Distance Between Centers 400 mm Bed Width 100 mm Spindle Bore 21 mm Spindle Taper MT3 Spindle Speed Control Variable Spindle Speed Range 50–2,500 rpm Metric Threads 14 Metric Thread Range 0.3–3 mm Imperial Threads 10 Imperial Thread Range 10–44 TPI Longitudinal Feed Range 0.089–0.198 mm/rev Tool Post Type 4-way Compound Slide Travel 65 mm Cross Slide Travel 80 mm Carriage Travel 276 mm Tailstock Quill Travel 50 mm Tailstock Taper MT2 Main Motor (S1/S6) 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Machine Length 900 mm Machine Width 400 mm Machine Height 1120 mm Weight (with stand) 63 kg

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The powerful centrally located motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. Gkjdpjztc Twofx Afujc TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Weight (kg): 33 Cable length (m): 12 INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: new, functionality: fully functional, NEW & UNUSED VACUUBRAND PC 3004 VARIO SELECT CHEMISTRY PUMP STATION For sale is an absolutely new, unused VACUUBRAND VARIO® chemistry pump station, type PC 3004 VARIO select (purchased from HUBERLAB Switzerland, new price / list price: CHF 10,590). The unit comes from a project design / incorrect allocation and has never been put into operation or brought into contact with any media. HIGHLIGHTS & BENEFITS: - Integrated graphic touch controller VACUU·SELECT with pre-defined and freely programmable vacuum processes - Highly efficient, speed-controlled VARIO diaphragm pump for precise vacuum control and extremely quiet operation - Highest chemical and solvent resistance due to fluorinated plastics in the media area - Integrated suction-side separator (AK) and pressure-side emission condenser (EK) for optimal solvent recovery TECHNICAL DATA: • Type: PC 3004 VARIO select • Power connection: 200–230 V~, 50–60 Hz (with CH power cable) • Vacuum controller: VACUU·SELECT (touchscreen) • Cylinders / Stages: 4 cylinders / 3 stages • Max. pumping capacity: 4.6 m³/h (2.7 cfm) • Ultimate vacuum (abs.): 1.5 mbar (1.1 Torr) • Ultimate vacuum with gas ballast (abs.): 3.0 mbar (2.2 Torr) • Max. back pressure (abs.): 1.1 bar • Motor rated power: 0.53 kW • Speed range: 30 – 2400 min⁻¹ • Protection class: IP 40 • Suction side connection: hose nozzle DN 6–10 mm • Pressure side connection: hose nozzle DN 8–10 mm • Dimensions (L x W x H): 419 x 243 x 457 mm • Weight: 21.1 kg CONDITION: Gkedpfozv H Ukex Afuoc 100% factory new, unused, with complete accessories. PAYMENT & LOGISTICS: • Invoicing: Sale is made against invoice (excluding VAT / tax-free intra-community delivery for companies in the EU with a valid VAT ID). • Currency & Payment: Billing in EUR. Bank transfer (SEPA) before collection or shipment. • Shipping / Transport: - Self-collection at the location (zip code 4226 Breitenbach / Basel region, Switzerland) is preferred. - Secure shipping via courier or freight forwarder (well-padded and packed on a pallet) within Switzerland and to the EU after consultation and upon assumption of costs.

Condition: as good as new (ex-display), Year of construction: 2025, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2170 mm Year 2025 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 Godpfx Afsxaabrjuekc - Digital speed display - Height-adjustable protective cover

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Gkodpfxszg Twgj Afusc Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2026, CORMAK Z7016 Vario Bench Drill Press for Metal – Compact and Functional Precision Drilling Machine The CORMAK Z7016 Vario metal bench drill press is a compact and functional column drilling machine designed for precise drilling operations in professional workshops and industrial applications. Thanks to stepless speed adjustment, a robust construction and versatile equipment, this model provides maximum control over the drilling process and high work efficiency. Main advantages of the machine Stepless speed adjustment – a range of 350–2400 rpm allows optimal adaptation to the processed material. Solid cast iron construction – ensures high rigidity and reduces vibrations during operation. Height and angle adjustable worktable – tiltable from -45° to +45° with rack-and-pinion height adjustment. Laser pointer and LED lighting – provide maximum drilling accuracy and improved operator comfort. Electronic speed display – enables real-time control of operating parameters. 65 mm vice included – the machine is ready for operation straight after unpacking. Construction and technology The Z7016 Vario metal bench drill press is built on a solid Ø60 mm column and a rigid cast iron base measuring 400 × 232 mm. The machine body and worktable are made from precisely machined castings. The MK2 spindle taper allows the use of a wide range of tools, while the 90 mm spindle stroke enables machining of deeper holes. With an overall height of only 910 mm, the machine is an ergonomic and mobile workshop solution. Precision and work efficiency Equipped with a 550 W (S1) / 700 W (S6) motor, the CORMAK Z7016 Vario column drill press allows efficient drilling in metal up to 16 mm in diameter. The stepless speed adjustment eliminates the need to change belt positions, significantly reducing machine setup time. The ergonomic three-arm feed handle, depth indicator and precise spindle guidance system ensure high repeatability and accuracy of drilled holes. Applications The Z7016 Vario metal bench drill press is recommended for: locksmith and service workshops, maintenance departments, technical schools, Gkodpfx Ajrif H Eofujc small production lines and prototyping workshops. Standard equipment 65 mm machine vice Laser drilling pointer LED work area lighting Electronic speed display Three-arm spindle feed handle Tilting table with rack-and-pinion height adjustment Technical specifications Maximum drilling diameter 16 mm Spindle speed range 350–2400 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 90 mm Spindle-to-column distance 150 mm Spindle-to-base distance 430 mm Table height adjustment range 335 mm Column diameter 60 mm Table dimensions 240 × 240 mm Base dimensions 400 × 232 mm T-slot width 14 mm Motor power (S1 / S6) 550 W / 700 W Overall height 910 mm Weight 46 kg