Used Arburg Allrounder 270S-500-60 for sale (34,822)

Condition: excellent (used), Year of construction: 2015, Clamping unit: 50 tons Ijdpfxex H Nu Re Abbotf Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2500 bar Working hours: 7600 hours 1 x hydraulic core 1 x pneumatic core 6 x hot runners

Condition: excellent (used), Manufacturer: ARBURG Itsdpfx Absx Eirqebjf Model: Allrounder 370S-700-70 Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Screw diameter: 18 mm

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Itedpfxjxqdtao Abbef Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection

Condition: excellent (used), Year of construction: 2004, clamping force: 1,000 kN, Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 Itsdpfxsvt Rwus Abbsf CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE without hopper

Condition: excellent (used), Year of construction: 2004, operating hours: 76,085 h, functionality: fully functional, machine/vehicle number: 196531, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 49 cm³, injection pressure: 2,240 bar, injection weight: 45 g, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 2,300 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 15 W, power: 19.9 kW (27.06 HP), Year of manufacture: 2004 Clamping force: 50 tons Distance between tie bars: 320 x 320 mm Screw diameter: 25 mm Isdpfx Absx Rq Rnsbjtf Injection volume: 49 ccm Shot weight: 45 g for PS Equipment: 2 x core pull, handling interface, interfaces for hot runners After complete inspection!

Condition: good (used), Year of construction: 2004, operating hours: 29,461 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, injection weight: 140 g, For sale: a well-maintained Arburg 570C-2000-350 2K injection moulding machine from 2004, with only approximately 30,000 operating hours. The machine is in good technical condition and is immediately ready for production. Specifications: Model: Arburg 570C Clamping force: 2000 kN Screw diameter: 35 mm (350) Year of manufacture: 2004 Operating hours: approx. 30,000 Itodpfx Aboxyyxqebef Control system: Arburg Selogica Configuration: Standard injection moulding setup, reliable and versatile Condition & Maintenance Machine always serviced as per schedule No significant fault history Clean and fully functioning hydraulic and electrical system Extras (optional) Other screw sizes available.

Condition: like new (used), Year of construction: 2008, Arburg 320C 500-170 Year of construction 05/2008 Iedpfx Abownz D Tjbstf Control Selogica Operating hours: approx. 60,000h (pump) Screw diameter 35 mm Fuel weight: approx. 105gr/hp Distance between spars 320 x 320mm Extras: Core pull Paint dispenser interface Handling interface Machine weight: 2200kg incl. removal device from the company. Star Year of construction 11/2007

Condition: ready for operation (used), Year of construction: 2011, operating hours: 41,881 h, functionality: fully functional, machine/vehicle number: 217330, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen distance: 1,100 mm Min. mold height: 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Specific injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm Itjdpfew Suy Ijx Abbef MACHINE DETAILS Heating power (electric): 13.6 kW Motor power (electric): 30 kW Operating hours: 41,881 h EQUIPMENT Handling unit GEKU SR 500 SH, year of manufacture: 2011 Conveyor belt "16"

Condition: ready for operation (used), Year of construction: 2017, operating hours: 16,948 h, functionality: fully functional, machine/vehicle number: 239279, clamping force: 2,200 kN, screw diameter: 40 mm, injection pressure: 2,200 bar, mold height (min.): 450 mm, ejector force: 70,000 N, TECHNICAL DETAILS Clamping force (hydraulic): 2,200 kN Max. platen spacing: 1,100 mm Itjdew Su A Nopfx Abbsf Mould height: min. 450 mm Ejector force: 70 kN Ejector stroke: 200 mm Ejector length: 110 mm Number of hydraulic core pulls: 2 Injection volume: 201/215 cm³ Spec. injection pressure: 2,200/1,620 bar Screw diameter: 40/35 mm Nozzle radius: 15 mm MACHINE DETAILS Electric power heating/motor: 13.6/30 kW Operating hours: 16,948 h EQUIPMENT Handling industrial robot SEPRO Stäubli 6X 160

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. Itsdpfx Aexzklqebbof T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: used, Year of construction: 2007, Injection moulding machine Arburg 570C 2000 150/60 2 K, year of manufacture: 2007 Control: Selogica Clamping force [kN]: 2000 Screw diameter: 25 / 12+15 Core pull: 1 Itodpfsxuq Ufox Abbsf Integrated hot runner zones: 15 Total power [kW]: 44.3 Opening stroke [mm]: 650 Selector unit: no Max. mould height [mm]: Min. mould height [mm]: 300 Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 49 Tie bar spacing [mm x mm]: 570/570

Condition: like new (used), Year of construction: 2019, Arburg 375V 500-100 Drehtisch (2019) Clamping force: 50 t Screw diameter: 20 mm Itsdpfswzmdxex Abbjf Type: Vertical Drive: Hydraulic PVC material

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry Itedpfofu Nbbex Abbof

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters Itedpeq Ikgkjfx Abbjf 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) Itsdpfxox Imqle Abbsf • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: ready for operation (used), A complete punching system with a grid punch is available. 1) Reel Gebrüder Kemmerich 7VID, year of manufacture: 1981, max. load: 1000kg. 2) Straightening machine, max. material width: 300mm, max. material thickness: 2mm. 3) Feed unit Alba UVHY 300/0.1, feed speed: 6.5m/min, max. material width: 300mm, max. material thickness: 4mm, transport rollers: 2. 4) Punching grid HR 50/600 NL, stroke rate: 300/min, stroke: 30mm-80mm. On-site inspection is possible. Iodpsw Az R Asfx Abbotf

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Ijdpfxow Ni Ibs Abbjtf

Condition: excellent (used), Year of construction: 2002, Arburg 320S 350-150 (2002) Iedpfxswmqx Ro Abbotf Clamping force: 35 ton Plate size: 455x455 mm Tie bar distance: 320x320 mm Min-Max daylight : 575 mm Screw dia: 30mm (up to 30%glass resistant)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, • Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg Iodpfxswgamks Abbetf Euromap

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt roller: transport roller diameter 60 mm -Total length: 500 mm -Holes: 15/12 mm / Ø15 mm M10 see photos Iedperyx Tlofx Abbstf -Quantity: 1 piece available -Dimensions: Ø 60 x 500 mm -Weight: 2.2kg

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Transport width: 500 mm -Shots: M10 -2 sprockets: Ø 41 mm, 10 teeth Itedpforxgwmex Abbjf -Quantity: 4x transport rollers available -Price per piece -Dimensions: Ø 60 x 500 mm -Weight: 3.1 kg/pc.

Condition: excellent (used), Year of construction: 2002, Arburg 270 S-250 - 60 Itjdpox I Rdvjfx Abbof Clamping force: 25 tons Year of manufacture: 2002 Tie bar spacing: 27 x 27 cm Control system: S Includes conveyor belts

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Laser power: 550 W Mains voltage 100-264V +- 10% Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. Ijdpfodux Duex Abbotf In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

Condition: good (used), Pipe grab, round grab, laying tongs, round material grab, scissor grab, rectangular tongs, clamp, clamping pliers -Manufacturer: Siegert, rectangular pliers type GZ -Grasping range: 20 to 60 mm -Load capacity: 500 kg -Quantity: 1x gripper available -Price: per piece -Dimensions: 500/100/H350 mm -Empty weight: 17 kg/pc. Itodpfxslg H I Ij Abbjf

Condition: good (used), Stock number: 3051 Manufacturer: Schneider Year of manufacture: Model: 500-270 Machine number: 95118451 Operating hours: Pressure: 10 bar Output: 393 l/min Tank Manufacturer: Behälterbau Burgau Year of manufacture: Tank number: 538394 Capacity: 270 l Ijdpfxjxw H Uge Abbstf Pressure: 11 bar Temperature: -10°C to 50°C Connection: 3 kW Footprint: 650 x 700 mm Overall dimensions: 700 x 700 x 1,700 mm Weight: 150 kg