Used Beyeler Pr 3 1000 Kn X 4100 Mm for sale (115,871)

Year of construction: 1988, condition: good (used), 18 stations shaft Ø: 89 mm strip width: 600 mm Cedpfsbh H T Isx Aqterf strip thickness: 3 mm

Year of construction: 1983, condition: good (used), strip width 1.600 mm Cjdpfjbidg Ejx Aqtjrf strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length

Year of construction: 1980, condition: good (used), 5 (7) rolls, Ø 160 mm strip width: max. 1.750 mm strip thickness: 0,4 - 3 mm Crodpfx Asdnztwsqtjf

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm Csdeqw Aacopfx Aqtsrf strip thickness: 0,5 - 3 mm coil weight: 40 t coil ID: 508/610 mm

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm coil weight: 10 t Csdpfeqw Akmjx Aqtjrf

Condition: excellent (used), functionality: fully functional, working width: 2,060 mm, sheet thickness (max.): 3 mm, back gauge adjustment: motor-driven, Equipment: emergency stop, safety light barrier, Vimercati mechanical guillotine shear. Credpfx Aqexdr R Tstsf - Cutting width: 2060 mm - Sheet hold-down cylinders: 11 units - Maximum cutting thickness for steel with Rm 410 MPa: 3 mm - Maximum cutting thickness for steel with Rm 600 MPa: 2 mm - Pneumatic rear sheet support Machine is currently in operation and fully functional. Equipped with motorized back gauge with manual control and display showing cutting dimensions. Machine comes complete with added safety guards and an operation and maintenance manual.

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Crjdpovbquiofx Aqtjf Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available in stock subject to prior sale. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Crsdpfsvbqlhsx Aqtef Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Possibility of 2000 and 3000 mm distance between centers. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Csdpfxjvbqt Ss Aqtjrf Center height 330 mm Max. diameter over bed 660 mm Max. diameter over carriage 420 mm Max. diameter over pocket 870 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50 Hz 7.5 kW Coolant pump 400V 50 Hz 90 W Dimensions 3000 x 1400 x 1600 mm Net weight 3330 Kg Accessories included: Self-centering chuck with 3 reversible jaws Ø320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, HYDRAULIC SHEAR MVD MODEL iSHEAR B 06-4000 EQUIPPED WITH A PNEUMATIC REAR SUPPORT. CNC ESA S 625 TECHNICAL SPECIFICATIONS Cutting capacity for material 450N/mm2: 06 mm Crsdpfxjfh R Inj Aqtof Cutting capacity for material 700N/mm2: 04 mm Cutting length: 4100 mm Fixed cutting angle: 1.5° Clamp cylinders: 18 Strokes per minute: 10 – 14 Back gauge: 250 mm Motor power: 10 kw Graduated scale and two sheet metal supports: 1000 mm Rear gauge stroke: 1000 mm Approximate weight: 11000 kg

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Metric US Standard Minimum workpiece Ø 20 Ø Min. Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Codpfxsvt Tuij Aqtorf Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: excellent (used), strip width: max. 1.750 mm Credpfx Aqsy Nyugjtof strip thickness: 0,4 - 3 mm cross cut swivelling range: +/- 34° coil weight: max. 25 t Coil OD: max. 2.000 mm mandrel Ø: 508 mm year: 1971/2004/2020/2023

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm Crjdpfx Aqjy Nypkjtef No. of strips: max. 11 coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Condition: used, Używana klaryfikująca prasa filtracyjna produkcji Seitz Orion typ OF 100/150 w wykonaniu ze stali kwasoodpornej. Prasa posiada 154 płyty filtracyjne wykonane ze stali kwasoodpornej o wymiarach 1000 mm x 1000 mm, oraz dwie płyty końcowe. Powierzchnia filtracji ok 310 m2. Zamknięcie hydrauliczne. Prasa zamontowana na ramie ze stali KO. W zestawie z maszyną przyłącza podawania, manometry i lokalny panel sterowania. Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic Crodpeyi Eygefx Aqtsf

Condition: good (used), Offer 26013 Csdpoyi Ahnefx Aqterf Technical data: - Length approx. 1500 mm - Width approx. 1000 mm - Thickness of top plate approx. 50 mm - Plate thickness incl. ribbing approx. 200 mm - Table height approx. 870 / 900 mm - Table frame/base - Total weight approx. 550 kg

Condition: new, Bernardo Motorized Sheet Metal Shear MTA 2060 x 3 mm NCC Cutting length 2060 mm Max. sheet thickness * 3 mm Cutting angle 1° 30’ Strokes/min 31 Working height 810 mm Rear stop 0 – 750 mm Table width 390 mm Motor power 4.0 kW Width 2600 mm Depth 2100 mm Height 1260 mm Weight approx. 1710 kg * Material strength 400 N/mm² Features Equipped as standard with a sheet metal holding device, ideal for thin sheets Crsdpfx Aqed Hxnhjtof Support arms on the front for easy processing of large sheets Motorized rear stop, precise adjustment via ball screws Clearly designed control panel with integrated control Robust steel sheet metal construction for vibration-free operation Support table with a right-angled stop on both sides High operator safety thanks to a protective cover and photocells on the rear of the machine 2-blade cutting knives made of high-quality steel guarantee clean and burr-free cutting Automatically acting clamping device for fixing the sheet Scope of supply Cutting line illumination Motorized NC rear stop Front sheet supports Side stops Protective plate with photocells NC control BRL 401.2 Pneumatic sheet metal holding device Foot pedal with emergency stop Knives made of tool steel

Condition: new, weight max. in kg 1000 kg arm length 4000 mm Crjdsxak Hxspfx Aqtjf height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Year of construction: 1979, condition: excellent (used), 4 x aluminum silos, resting on a base ring, year of manufacture 1979 – used – designed for a specific weight of 0.6. Capacity approx. 53,000 liters Diameter approx. 2,400 mm Overall height approx. 14,250 mm Weight approx. 1,410 kg Documentation: yes, drawing Tank with upper conical bottom and lower 60° cone. Connections: on the top: 1 flange stub DN 80 for filling 1 flange stub DN 100 on the shell: 1 manhole DN 500 2 sockets 1 ½“ the cone ends in a flange DN 150 otherwise, see drawing and photos. Csdpef D Hv Ijfx Aqtjrf The silos have already been disassembled and can be inspected at any time in 76694 Forst.

Condition: excellent (used), functionality: fully functional, Aluminum silo with extended support ring - used - Volume: approx. 48,000 liters Container type: silo Condition: used Suitable for food: yes Construction: vertical Internal diameter: approx. 2,400 mm Cylindrical height: approx. 13,750 mm Overall height: approx. 15,000 mm Specific gravity of medium: 0.8 t/m³ Operating pressure: non-pressurized Material / Design Shell material: aluminum Features Support structure: foot ring/stand collar Top end plate: conical top Slope: approx. 15% Bottom end plate: cone Cone angle: 60 degrees Top: 1 x flange DN 100 PN 10 (filling) 1 x flange DN 150 PN 10 (vent) 1 x flange DN 150 PN 10 (level measurement) 1 x flange DN 100 PN 10 (spare) 1 x threaded socket 1 1/2" (sensor technology) 1 x roof edge railing with handrail 2 x crane lugs Shell: 1 x stand collar door (approx. 880 x 1800 mm) 5 x pipe brackets for filling pipe 5 x pipe brackets for overflow pipe 1 x filling pipe DN 100 (filling lines and connections for silo trucks may need to be retrofitted in part) 1 x overflow pipe DN 80 1 x threaded socket 1 1/2" (measuring probe) Bottom: 1 x cone (60°) 1 x flange DN 80 (overflow pipe) Crsdox Stccjpfx Aqtof Fittings: The measuring and control equipment currently installed (where present) is included in the scope of delivery. However, no warranty is provided for its functionality! Otherwise as shown in the photos and drawing. Documentation: Drawing

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 4,100 mm, warranty duration: 12 months, controller model: CutLink, back gauge: 750 mm, control type: NC control, stroke rate (max.): 35 1/min, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Demonstration machine motorized guillotine shear Producer CIDAN Year of manufacture 2023 Cutting length 4100 mm Sheet thicknesses 1.50 mm at 400 N/mm² Sheet thicknesses 0.60 mm at 700 N/mm² Sheet thickness 2.2 mm at 200 N/mm² Up to 35 strokes per minute Equipment: Touch control CutLink Backgauge range 5-750 mm Pneumatic sheet holding device forward depositing Sheet chute forward depositing (return to sender) Extendable table support range 800 mm LED cutting line lighting Machine is available in our showroom in A- 6800 Feldkirch Codpfowxu S Eex Aqtsrf Delivery time: immediately

Condition: new, Year of construction: 2026, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. Credpjmhhn Esfx Aqtjf - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. - Add vacuum grippers to make work lighter, more precise, and automated!

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape Crodehqnl Tepfx Aqtef aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Crsdpfx Aqjd Ab Uustof Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 10,000 kg, number of straightening rollers: 6, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 255 mm, sheet thickness copper (max.): 3 mm, inner diameter: 510 mm, outer diameter: 1,500 mm, mandrel diameter: 510 mm, mandrel length: 1,500 mm, coil width: 1,500 mm, coil outer diameter: 1,500 mm, number of blades: 8, warranty duration: 12 months, straightening roller diameter: 140 mm, total width: 1,500 mm, Slitting line model 1,500 x 3 mm, comprising: - Decoiler Aspo mod. 1500/5Ton (customizable) - Loading table - Feeder and straightener with 6 rollers, diameter 140 mm - Rotary cutter with 4 pairs of circular blades Crjdpfxsx Hr S Sj Aqtef - Automatic punching unit with 20 customized punching stations - Mechanical shear - Aspo recoiler

Condition: new, sheet length: 1360sheet thickness: 3Standard Accessories: NC control system Crsdpfoxx D Efex Aqtjf Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards