Used Biesse Left Head 7 Points for sale (47,271)

Condition: used, Year of construction: 2018, machine/vehicle number: 1000023651T, functionality: fully functional, power: 50 kW (67.98 HP), input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 3,200 mm, Equipment: documentation/manual, Selco WNAR 6 miter saw center. Lodpfjzl T Hlex Ahajah

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, TECHNICAL SPECIFICATIONS: Working area (x,y,z): 2900 x 1130 x 110 mm No. 6 work bars with vacuum cups, each with 3 cups BECKER vacuum pump, 90 m3 capacity Separate electrical cabinet + control console Software: BIESSEWORKS Safety mats DRILLING UNIT BH 17L No. of vertical drilling spindles: 10 Laodpozfi H Uefx Ahajh No. of horizontal drilling spindles: 2 + 2 on the X-axis 1 + 1 on the Y-axis No. 1 blade unit for grooves on the X-axis CLAMPING UNIT: 7 kW electrospindle - ISO30 10-position tool changer

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Ljdpsxncrvsfx Ahaoah Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Ledjxraimjpfx Ahaoah Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1000017221, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, controller model: BSuite3, number of spindles: 17, TECHNICAL DETAILS Working area X-axis: 2,500 mm Working area Y-axis: 900 mm Working area Z-axis: 60 mm Number of axes: 3 Tool: ISO 30 Spindles Lajdpfoyzpcdjx Ahash Total number of spindles: 17 6 vertical in X-axis 5 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis MACHINE DETAILS Numerical control: BSolid Software - BSuite3 EQUIPMENT Automatic unloading device Integrated blade for groove insertion Front protective and safety systems with mats Perimetric protective grids External reference: MME002

Condition: ready for operation (used), Year of construction: 1984, Brand: Biesse Laedperiutksfx Ahaeh Model: Forecon 51 Machine no: 401/83 Year model: 1984 Tech data: 1 horizontal drilling unit with 21 spindles 2 swivel drill units with 15 drill chucks each Center distance between spindles: 32mm Horizontal unit motor: 2Hk 2 vertical motors: 2Hk Spindles: 2800rpm Air pressure: 6-7 atm Air consumption per cycle: 17 l Total engine power: 5.5Kw Comes with fence, see picture. Machine size: 1500x3140x1500mm Weight: approx. 590 kg Stock no: 2001355

Condition: excellent (used), Electronic programmer RT 483 No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Max. working width (mm) 3200 Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Total power installed (Kw) 35,1 Laodpjfz Nanjfx Ahaoh The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Lajdpfx Asv R Nk Uohajh Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Ljdjvwgizopfx Ahasah Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Laodpfxsu Tg Uqe Ahaoh Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling Lasdpfx Ajcr U Urjhash “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Lajdst N Ix Rjpfx Ahajh Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 2 pcs. SARG Vibration dowel inserting device. 1 pc. vacuum underpressure pump Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Lodpfxot N Rkvo Ahajah Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 21090, functionality: fully functional, feed rate X-axis: 25 m/min, overall weight: 3,800 kg, controller manufacturer: SINTRA, Dismantling and loading can be carried out by the seller! Lsdpfx Aheydc Scsajah TECHNICAL DETAILS Feed speed: 25 m/min 2nd pass: 18 m/min MACHINE DETAILS Control: SINTRA Weight: 3,800 kg Air supply: 7 bar Extraction volume: 30 m/sec EQUIPMENT - CNC-adjustable working height - Infeed fence controlled by CNC - Side fence with idler rollers for panel support - Upper pressure unit with motorized belt - Anti-adhesive unit - Pre-milling unit - Panel edge pre-heating unit with lamps - EVA adhesive application system - EVA glue premelter - Pressure rollers 1 + 5 - End trimming unit with 2 motors and automatic angle adjustment - Rough milling - Fine milling unit with 2 tilting motors and automatic adjustment via CNC servo motors - Multifunction unit (fine milling + corner rounding) with 2 motors and automatic CNC adjustment - R1 R2 edge scraping unit (NC pneumatic positioning) - Groove unit - Glue scraping unit with anti-adhesive spray system - Polishing unit with 2 motors for panel cleaning

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 77503, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 25 m/min, overall weight: 6,510 kg, controller manufacturer: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Lodjydidrjpfx Ahasah Solid wood: 20 mm PVC / ABS: 3 mm Max. feed speed: 25 m/min MACHINE DETAILS Control: Sintra Weight: 6,510 kg EQUIPMENT - Sanding unit - Coil holder magazine with 2 positions and automatic edge change via CNC - Adhesive unit for EVA hot-melt glue with preheating device and glue pot - Preparation for adhesive unit for PUR glue - Pressure group for straight profiles with electronically adjustable pressure rollers via CNC - End trimming unit with 2 motors and automatic tilt adjustment - Filler unit with 2 vertically aligned motors - Edge smoothing unit with 2 swivelling motors - Multifunctional 4-motor corner rounding unit (smoother + corner rounder) with numerical control in automatic adaptation - Anti-stick unit - Adjustable edge scraper unit - Glue-saving unit - Oscillating brush unit - Electronically adjustable working height - Motorized rubber belt with increased pressure - Motorized and electronically adjustable panel guide - Side roller conveyor with idler rollers for panel support

Condition: good (used), Machining center composed of: 2 drilling heads (one upper and one lower) for vertical and horizontal drilling 1 upper milling unit and 1 lower milling unit 1 upper saw unit and 1 lower saw unit STANDARD CONFIGURATION Lasdpfxjy E Ir Eo Ahaeh

Condition: excellent (used), 1 used, very well-maintained universal milling head system "HURON" with hydraulic tool clamping and electric tool release signal Model: KFU-2-45, version 021 Lsdpfxsy Uby Io Ahaeah Technical data: Spindle mount, DIN 2079: ISO 50, for tools according to DIN 69871 + 69872, Type A Overhang: 377 mm Max. speed range: 3500 rpm 3750 rpm 50% duty cycle/hour 4000 rpm 30% duty cycle/hour Max. drive power: 15 / 22 kW Operating pressure for tool release: 80 + 5 bar Dimensions L x W x H: 450 x 305 x 360 mm Weight: approx. 180 kg Accessories / Special features: • 2 manual swivel table systems "HURON" • Hydraulic tool clamping • Electric tool release signal • For retrofitting to conventional, NC or CNC milling machines or boring machines (e.g.: AUERBACH, UNION, MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, ARSENAL, ...) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" Mount ISO 40 Overhang 300 mm Centering flange diameter 125 mm Rated drive power 10 HP Max. speed 1800 rpm Milling head dimensions L x W x H approx. 375 x 245 x 300 mm Weight approx. 80 kg Accessories / Special features: • Manual tool clamping • 2 axes that can rotate relative to each other, allowing any setting angle! System "HURON" • Tapered interfaces are manufactured according to the "KLINGELBERG" system • The main spindle's roller bearings consist of tapered high-precision rollers • 1 tool clamping screw The spindle and gear bearings have been completely renewed! Design: standard, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any type Siegfried Volz Werkzeugmaschinen Lajdpez Adz Usfx Ahaeh Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), DECKEL High-Speed Milling Head No. 2021-2230 / FP 4 - 0199 This high-speed milling head is suitable for a DECKEL FP 1 / 2 / 3 / 4. When used on an FP 1, an intermediate plate is required. Laedpfxewg Rybo Ahaeh Spindle mount SK 40 Spindle speed range 40 - 2000 + 125 - 6300 rpm. Quill adjustment Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), 1 used, very well-maintained universal milling head for retrofitting to conventional, NC, or CNC milling machines or boring mills of any kind, "HURON" system, swivels across 2 axes, every angle adjustable. Spindle taper ISO 50 Reach approx. 360 mm Rated drive power 10 HP Max. speed 1800 rpm Weight approx. 82 kg Accessories / Special features: • Manual tool clamping • Main spindle and all shafts/gears are made from case-hardened and tempered chrome-nickel steel Lasdpfxsyc Ei Ue Ahajh • Two rotatable axes for infinitely adjustable angles! "HURON" system • Conical gears are ground according to the "KLINGELNBERG" system • The main spindle rolling bearings are high-precision tapered roller bearings • 1 pull stud for tool retention This high-quality milling head was used as a loaner head and only deployed for repair purposes when the main head was being serviced or overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, 1 brand-new universal milling head system "HURON" Manufacturer: EMENA Model: V 0, ISO 40, standard Lsdebpmv Sspfx Ahasah Technical data: Mounting: ISO 40 Overhang: 270 mm Nominal drive power: 5 HP Max. speed: 1800 rpm Weight: approx. 32 kg Design: Standard, with adapter plate / mounting flange, head side finished, machine side unfinished, for subsequent installation on conventional, NC or CNC milling machines or drilling machines of any type, "HURON" system Option: - Adapter plate, head side fully machined, machine side with allowance for machining - Extended version Delivery time: approx. 3 months, after order receipt and payment Images are similar! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, mileage: 927,000 km, power: 278 kW (377.97 HP), first registration: 10/2015, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: tail-lift, Reported prices exclude BPM and apply only to export. Laodpfx Ahszbpp Neash

Condition: excellent (used), mileage: 223,714 km, power: 132 kW (179.47 HP), first registration: 01/2020, fuel type: diesel, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: air, number of seats: 2, total length: 7,670 mm, total width: 2,320 mm, total height: 3,100 mm, permissible axle load (axle 1): 2,500 kg, permissible axle load (axle 2): 5,350 kg, loading space length: 5,240 mm, loading space width: 2,240 mm, loading space height: 2,090 mm, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, onboard computer, power mirror, sliding door, tachograph, tail-lift, traction control, General information Number of doors: 3 Year of construction: 2020 Cab: single Registration number: 77-BPF-4 Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Transmission Transmission: HI-MATIC, 8 gears, Automatic Axle configuration Tyre size: 225/75R16 Ledpfjy Dt I Nex Ahasah Brakes: disc brakes Front axle: Max. axle load: 2500 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 5350 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70%; Suspension: air suspension Weights Empty weight: 3.865 kg Carrying capacity: 3.135 kg GVW: 7.000 kg Functional Tail lift: DHOLLANDIA DHLM.15, tail lift, 1000 kg Make of bodywork: LAMBOO Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Camera 360 degree - Climate control - Heated door mirrors - Lane assist - Multifunctional Steering Wheel - Passenger seat - Radio/Cd/Audio system - Reversing camera - Side door - Twin wheel axle = Remarks = VIDEO: Very beautiful and neat Iveco Daily 70C18 3.0 D 180hp Euro 6D Hi-Matic 8-speed automatic GVW 7000 KG ( Driving license C1 / C ) Payload 3175 kg Internal dimensions Cargo space L. 5243 mm / W. 2236 mm / H. 2093 mm Electric sliding door 223000 KM Fully dealer maintained Technically and visually in very good condition

Condition: used, operating hours: 6,744 h, lifting height: 4,000 mm, free lift: 1,120 mm, fuel type: diesel, mast type: triplex, fork length: 1,300 mm, fork width: 1,180 mm, total height: 2,000 mm, total length: 2,930 mm, total width: 1,350 mm, color: orange, Year of manufacture: 2006 Empty weight: 6.400 kg Lifting capacity: 4.000 kg - Year: 2006 - Documentation available: Yes - CE marking present: Yes - Serial number: 10171 - Operating hours: 6744 - Lifting capacity: 4000kg - Lifting height: 4000mm - Overhead clearance: 2000mm - Free lift: 1120mm - Fork length: 1300mm - Maximum fork width: 1180mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Joystick, Half cabin, Free-lift - Mast: Triplex - Drive: Diesel - Motor brand: Toyota 14Z - Transport dimensions: 2930mm x 1350mm x 2000mm (l x w x h) Laodpfozkkd Eox Ahaoh - Transport weight [kg]: 6400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, power: 405 kW (550.65 HP), fuel type: diesel, tire size: 385/55-22,5, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control system - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - High beam - Low noise emission - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Leather interior - Alloy wheels - Air suspension - Air-suspended seats - Air horn - Driver fatigue detection - Particulate filter - PTO (Power Take-Off) - Radio / multimedia system - Beacon light - Reverse camera - Disc brakes - Sliding roof - Heated seats - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Pre-heating system - Toolbox - Windscreen NEW at PAVIC HEAVY-DUTY CRANE VEHICLES of the absolute highest class! No wishes are left unfulfilled here. Currently in the order planning stage, so customer requests for changes are still possible (e.g. cab color or equipment features). VOLVO FH540 HP 8X4 Air/Air with platform body and Palfinger PK 165.002 TEC 7 & FLY-JIB PJ 300L + TS (winch) TRUCK: Volvo FH 540 8x4 FH - Safety driver’s cab (low cab with bed) Engine 13 l, 551 hp, Euro 6 Step E I-Shift 12-speed automatic transmission I-Shift drive modes: Standard, Performance, and Economy VEB+ Volvo Engine Brake Retarder VDS (Volvo Dynamic Steering) Full air suspension Tires: FA 385/65 R 22.5, Drive RA 315/80 R 22.5 AHK ROCKINGER 400 G 150 or ø50mm Active Safety Package: ACC Adaptive cruise control, driver alert system, lane change support, lane keeping assist, reversing camera, turn assist, tire pressure monitoring system, Alco-lock preparation, etc. LED main headlights LED rear lights Driver’s seat: comfort, air-suspended, heated, seat belt integrated Automatic climate control Auxiliary heater Auxiliary air conditioning Cooler with freezer compartment 33 l High-level instrumentation with digital, fully-dynamic driver information display (4 views selectable) Palfinger PK 165.002 TEC 7 with Fly-Jib PJ300L + TS Winch (mounted behind the cab) An absolute superlative crane! 5-point support (1 in front of the vehicle cab and 4 laterally) Fully equipped Removable Fly JIB Winch 4.5t Scanreco radio remote control with linear lever Lifting capacity without JIB at 16.2m: still 6,800kg Laedpjylxw Rofx Ahaoh Lifting capacity with JIB at 35.9m: still 1,120kg Reachable height with JIB vertical/steep: almost 40 meters!!! Reachable height with crane inclined/steep and JIB horizontal: approx. 20 meters height and outreach nearly 25 meters. (See load diagrams) Platform body with drop sides Platform body with 400 mm side wall height Platform length approx. 4,500 mm Platform width approx. 2,550 mm Lashing options at 45° outer frame every approx. 200mm Forklift approach protection Support leg plates incl. holders Various toolboxes Chain box integrated in rear support leg Extensive number of work lights Financing, leasing, or hire purchase is possible. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes...