Used Biomérieux Mass Spectrometer for sale (737)

Condition: used, The scope of delivery includes: 01x stacking container, used Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm usable width: approx. 780 mm Itsdpfxjk Nlppo Anwoh Total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Useful height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside - outside) Frame depth: approx. 480 mm Useful depth: approx. 400 mm stackable: yes crane eyes: 4 pieces diameter of crane eyes: approx. 40 mm Remark: The stacking or transport containers may be bent. Furthermore, they may have dents or other damages. other damages. The above price refers to the Pickup price per piece!

Condition: good (used), The scope of delivery includes: 03x stacking container, used Manufacturer: Thyssen Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm useful width: approx. 780 mm Total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Useful height: approx. 400 mm Underride height: approx. 100 mm Itsdpsm Sgmyefx Anweh Total depth: approx. 560 mm (outside - outside) Frame depth: approx. 480 mm Useful depth: approx. 400 mm stackable: yes crane eyes: 4 pieces diameter of crane eyes: approx. 40 mm Remark: The stacking or transport containers may be bent. Furthermore, they may have dents or other damages. other damages.

Condition: used, Year of construction: 2023, operating hours: 800 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tire size (front): 600/70 R30, tire size (rear): 710/70 R42, operating hours: 800, initial registration: 19.12.2024. Initial registration: 19.12.2024, operating hours: approx. 850. Standard equipment/technical data: ENGINE: Max. power 224/305 kW/hp (ISO 14396), max. torque 1280 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, electronic engine control with Vistronic fan control, engine speed memory, Powercore engine air filter with coarse dirt pre-filter, EasyCare cooler package, additional fuel pre-filter with water separator, 500-liter fuel tank. Itsdpfjw E N Tdjx Anwsh

Condition: used, Technical details: Itsdpfxeu N Atws Anweh measuring range X-axis: 3000 mm indexing: 0,1 mm weight: variable kg No. 1 Caliper/caliper gauge made of stainless and hardened steel Make INOX Measuring range 0 - 3000mm Reading 0.05mm via vernier Leg length approx. 280mm without measuring tips for internal measurement No. 2 Caliper/caliper gauge made of stainless and hardened steel Make Massi according to TGL Measuring range 2000mm Reading 0.1mm via vernier *

Condition: used, Year of construction: 2021, operating hours: 1,120 h, power: 53 kW (72.06 HP), Equipment: all wheel drive, front linkage, * German-made machine, first owner, in very good condition * TABMC040VK5115005 * Full service history * Road approval, 40 km/h * 4x4 all-wheel drive * Year of manufacture: 2021 * Operating weight: 6,200 kg * Tires: 340/85 R24 (front), 420/85 R34 (rear), approximately 80% tread Itedpfxey Ubguo Anweh * * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: [Phone number] * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, total length: 1,450 mm, total height: 1,800 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 3,000 kg, warranty duration: 12 months, table width: 1,450 mm, tank capacity: 19 l, table length: 1,100 mm, workpiece weight (max.): 150 kg, PRICE 95,000 EUR (excl. VAT) SERVICES INCLUDED IN THE PRICE: Wooden crate suitable for international container shipping Inspection and demonstration under power prior to payment, at our facility in Belgium Sample print during inspection, upon request On-site installation and commissioning by personnel with previous certified experience on Massivit systems, included for EU destinations. (For non-EU installation, availability is subject to location and prior agreement — please enquire.) On-site operator training by personnel with previous certified experience on Massivit systems at the buyer's premises (EU destinations included; non-EU subject to prior agreement), or alternatively at the seller's facility in Belgium (max. 2 persons, max. 5 days) — available for all buyers 6-month warranty on refurbished mechanical components: dispensers (stators, bearings, couplings), pump stator, dispenser seals, gel filtration system 12 months remote technical assistance via WhatsApp, email or video call, including operation support, g-code guidance, print parameter optimisation and general technical advice DESCRIPTION Large-scale industrial 3D printer Massivit M1800 Pro, model year 2018, professionally refurbished and operational and testable under power. The machine can be inspected and tested under power by appointment at our facility in Belgium. Sample prints available upon request. On-site installation and operator training are included for EU destinations and delivered by personnel with previous certified experience on Massivit systems, supporting setup, calibration and commissioning. For non-EU destinations, please enquire. Training at the seller's facility in Belgium is available for all buyers (max. 2 persons, max. 5 days), covering installation procedures, operation, routine maintenance, software usage and basic troubleshooting. Post-sale remote technical assistance included for 12 months. The machine is equipped with dual independent printheads and offers a build volume of 145 × 111 × 180 cm, making it suitable for the production of oversized parts, moulds, master models and display elements. The system operates with GDP (Gel Dispensing Printing) UV-cured technology, enabling high-speed manufacturing of large components with reduced support requirements, lower material consumption and reduced post-processing time. Itedexx S Diopfx Anweh REFURBISHMENT DETAILS Dispensers refurbished: new stators, bearings and couplings Hydraulic pump refurbished: new stator installed Dispenser seals and rubber wear components replaced Gel filtration system refurbished: new filters installed UV curing modules tested and calibrated XYZ belt tensioning and full table alignment performed DisplayPort cables and left head camera replaced Software updated to Massivit Smart Printer v5.0.3, BIOS/OS verified Complete system alignment, calibration and functional testing performed before sale Standard equipment included: 2 × nozzles 2.6 mm, 2 × nozzles 1.8 mm, grease gun Software license dongles included (Massivit Printer + Massivit Slicer) Machine available for collection in Belgium (EXW — Ex Works). Loading, handling and transport are at the buyer's cost.

Condition: used, Various cantilever racking systems 4x racking unit: Dimensions: 6,125 x 2,400 x 3,000 mm Approximate weight: 8,000 kg 2x racking unit: Dimensions: 5,650 x 2,400 x 3,000 mm Approximate weight: 7,380 kg Static load calculations available !! Image 1 shows the racking system in its assembled state !! Itsdpfsyrq Nljx Anweh ä3626

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Itjdjui Ifcopfx Anwjh

Condition: repair required (used), functionality: not functional, fuel type: diesel, Year of construction: 1995, operating hours: 8,700 h, Equipment: adjustable boom, cabin, Extendo, 3 backhoe buckets, converter needs repair. Itsdpfx Aney Ex Evewjh

Condition: good (used), Scale Make Massi Ijdpfjdx D T Ejx Anweth Measuring length 500 mm Schnabelänge 150 mm GES. Length 670 mm

Year of construction: 2024, condition: refurbished (used), functionality: fully functional, Steel gauge block set, accuracy class 1 according to DIN ISO 3650, with 103 pieces, supplied with a new calibration certificate bearing the accreditation symbol (DAkkS), issued to the buyer. Iedpfx Ansyyd Eqewsth

Condition: excellent (used), To automatically turn up-side-down (180°) the workpieces (stack of panels) Entry and exit of the panels in the longitudinal direction Manages one stack of panels per time Min/Max thickness of the stack mm 1000 / 1600 Working width (min/max) mm 300 / 1300 Useful working length (min/max) mm 500 (min) / 3000 Separate electric and command panel Total installed motor power Kw 4,3 Itodpfx Aogvpn Isnwjh

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Iedpfx Anoyvmq Iewoth Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Rear window washer/wiper Automatic battery isolation switch, 12

Condition: excellent (used), Year of construction: 1968, operating hours: 4,331 h, fuel type: diesel, first registration: 10/1968, color: red, Technical condition: very good Visual condition: very good Itjdpfx Ansyr Ayvsweh Contact Thierry Leemans for further information.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 70 h, total length: 2,200 mm, total height: 2,600 mm, total width: 1,600 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 230 V, input current: 10 A, compressed air connection: 6 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, volume flow: 15 m³/h, We are offering this used 5000 Massivit 3D printer (only 70 operating hours), year of manufacture 2023. Supply voltage: 220/380-240/415 V Iedpfjyvhubsx Anwsth Connection type: 3W+N+PE Rated current: 10 A Frequency: 50/60 Hz Short-circuit current: 5 kA Air pressure: 6-8 bar Air flow: 250 L/min Weight: 2500 kg If you have any questions or require more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1970, operating hours: 6,594 h, fuel type: diesel, first registration: 08/1970, color: red, WORKS PERFECTLY WITH DOCUMENTATION = Further Information = Permissible total weight: 654,926 kg Technical condition: very good Visual condition: very good Contact Thierry Leemans for further information. Itjdpeymtgijfx Anweh

Condition: used, Year of construction: 2018, functionality: fully functional, The DL 45 transfer pump is a must-have solution for companies seeking to optimize liquid transfer in various sectors such as agriculture, the food or chemical industries. Thanks to its robust design, it guarantees reliable, long-lasting performance, ensuring efficient transfer of liquids between different containers. In fact, this pump adapts perfectly to the requirements of industrial environments, offering a versatility that makes it indispensable. What's more, its easy integration into existing production systems reduces downtime, boosting overall operating efficiency. With its simplified maintenance, operators save time and can concentrate on other critical tasks. What's more, the DL 45 pump is ideal for high-volume transfers or more specific operations, guaranteeing optimum performance with every cycle. In short, this transfer pump is the perfect tool for professionals looking to improve the management of their production processes, while ensuring a continuous, uninterrupted workflow. With its proven reliability, it's a wise choice for maximizing efficiency and productivity. Technical specifications: Iodpfxju H Uvxe Anwoth Manufacturer : Massilly QHA 00022 A used transfer pump Year of manufacture: 2018

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Furthermore, a variety of materials is available for the machine. Itedpfexwpvgjx Anwoh

Condition: good (used), Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment according to TGL 9252 Itsdpfsg Si I Ssx Anwoh -Measuring range: 0-2000 mm -Dimensions: 2260/302/H17 mm -Weight: 7.4 kg

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/75/H130 mm -Weight: 4.8 kg Itsdpfsv Ac Uksx Anweh

Condition: good (used), Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment according to TGL 9252 Iedpfeg Si Iysx Anwoth -Measuring range: 0-750 mm -Number: 2x calipers available -Price: per piece -Dimensions: 950/242/H13 mm -Weight: 2.2 kg/pc.

Condition: good (used), Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment -Measuring range: 0-500 mm -Dimensions: 670/185/H13 mm -Weight: 1.4 kg Iodpfsg Sn Ahex Anwjth

Condition: good (used), T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove Iedpfocbqqxex Anwjth -Weight: 156 kg

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 10,350 h, power: 91.94 kW (125.00 HP), motor manufacturer: Perkins, gearing type: semi-automatic, fuel type: diesel, maximum speed: 30 km/h, color: red, machine/vehicle number: N 350065, Equipment: air conditioning, cabin, lighting, power shift gear, Dynashift gearbox Front linkage Itsdjx Tcu Rjpfx Anwjh Front axle and cab suspension

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Workpiece Diameter: 620mm Iodpfxsyazc Ss Anwjth Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Pneumatic Connection: not required Colour: Blue RAL 5001, Grey RAL 7035 For further details, please see the PDF description in the attachment.