Used Chilled Water for sale (6,763)

Condition: used, Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m3 - Mixing and equalisation tanks 2, 40 m3 - Mixing and equalisation tanks 3, 80 m3 - Bioreactor 1, 240 m3 - Bioreactor 2, 240 m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m3 - Secondary sedimentation tank 2, 100 m3 - Thin sludge tank, 70 m3 - Thick sludge tank, 90 m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25 m3 - Various process water pumps Rjdsvcql Rjpfx Ad Ast Bioreactor capacity 2 x: 240 m3 Operation / Control: Siemens Simatic S7 Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x sludge dewatering; thick sludge tank

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. Redpfx Aoy D Rk Iod Ajt The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, functionality: fully functional, power: 7 kW (9.52 HP), fuel type: diesel, color: yellow, overall weight: 1,600 kg, empty load weight: 550 kg, first registration: 11/2001, Year of construction: 2001, Trailer with Water Tank: + Blanchard + First registration: 12.11.2001 + Height-adjustable drawbar + Car coupling + Single axle + Unladen weight: 550 kg; Perm. total weight: 1,600 kg + 1,000 L water tank + 2x Hatz diesel engine with electric start -> 1B20, 4.2 hp with pump, hose reel, and hose -> 1B40, 9.8 hp with pump, hose reel, and lance + Municipal equipment, one owner Rjdoy D Smdjpfx Ad Aot Receive all newly listed vehicles via email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, Stainless Steel Heat Exchanger AGETHERMA Type FT-1.1-910/230/10-RS04-T10-ATWH Air-to-water, Air-to-oil Heat Exchanger Serial No. WT08-1065P-2 Year of Manufacture: 2008 Completely made of stainless steel (presumably 1.4571) Gas/air flow: 900 x 230 mm External connection flange: 1000 x 310 mm Max. permissible pressure: 10 bar Max. permissible temperature: 300 °C Volume: 27 liters Test pressure: 17.9 bar Net weight: 325 kg Manufacturer test date Flange size: Ø DN25 DIN 2635 PN 40 (2 pieces) - Tubes are stainless steel with aluminum fins for improved heat transfer Rsdpfxey Dvgus Ad Aet Available as optional accessories (at extra cost): 3 units heat exchangers with identical technical data and 27 liter capacity (weight per unit: 325 kg) 1 unit heat exchanger with identical technical data and 17 liter capacity (weight: 200 kg) 2x 90° bends with flange connection, made of stainless steel 2x adapters from rectangular flange to round pipe Ø 210 mm, made of stainless steel Price stated per heat exchanger The pictures show all 4 heat exchangers as one unit placed on a pallet. Total weight of all parts approx. 1,400 kg Sale of all heat exchangers as a package: 4,000 EUR

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 149, For sale is an Ekochem WG400 water ring pelletizer including a WP200 centrifugal dryer, both in very good condition. This system is suitable for pelletizing plastic melts and is particularly designed for applications involving PE, PP, and PS. However, it is also well-suited for pelletizing other types of plastics. The WG400 water ring pelletizer is designed for reliable, continuous operation and enables the production of consistent plastic pellets. The water ring process ensures a clean and efficient pelletizing process. The system is configured for a throughput of approximately 600 kg/h, but with parameter optimization via the control cabinet, higher capacities can be achieved. Technical data for the water ring pelletizer: - Motor: 2.2 kW by Siemens - 4-blade system - Max. blade speed: 3,000 rpm - Heating power: 2.5 kW - Max. temperature: 300°C - Blades are pneumatically pressed against the die plate Rodpfoy Av A Tex Ad Ajt - All main components are made of stainless steel Centrifugal dryer: - Motor: 4 kW - Motor speed: 1,500 rpm - 400 L water tank, stainless steel - Water pump: 2.2 kW - Filtration: 25-200 μm - Heat exchanger: 2 m² - Filtration volume: 15 L Additionally, we offer a second water ring pelletizer without dryer, priced at €8,000 net. The machine is sold as inspected. Viewing by appointment is possible. Further information, images, and technical details available upon request.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2022, color: grey, Year of construction: 2022, = Additional Options and Accessories = - Air suspension = Notes = Pezzaioli 1/2/3/4 deck livestock trailer - Water & Ventilation - Loadlift - Lifting roof - BPW Axles Manufacture Year: 19-8-2022 ZFJSBA32UNM008036 1/2/3/4 deck (Front: 3 decks / Rear: 4 decks) Front: 1st floor: 9.4 Rsdpfx Adey Aml Eo Ast 2nd floor: 8.8 3rd floor: 8.6 Rear: 1st floor: 23.9 2nd floor: 22.4 3rd floor: 21.9 4th floor: 21.4 Water & Ventilation Loadlift Lifting roof BPW Axles = Further Information = Axle Brand: BPW Rear Axle 1: Twin tires; Alloy rims; Max. axle load: 9,000 kg Rear Axle 2: Twin tires; Alloy rims; Max. axle load: 9,000 kg Rear Axle 3: Twin tires; Alloy rims; Max. axle load: 9,000 kg Unladen weight: 13,500 kg Payload: 25,500 kg Gross vehicle weight: 39,000 kg Technical condition: good Visual condition: good

Condition: excellent (used), mileage: 38,664 km, power: 162 kW (220.26 HP), first registration: 03/1992, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of gears: 6, suspension: steel, Year of construction: 1992, Equipment: trailer coupling, = Additional Options and Equipment = - Rear work lights Rsdpfx Aoy Ai U Nsd Aot - Front work lights - High beam - Enclosed cab - Radio/cassette player - Tow jaw = Further Information = General Information Cab type: double cab Technical Details Number of cylinders: 6 Axle Configuration Suspension: leaf spring suspension Front axle: steerable; tyre tread (left): 80%; tyre tread (right): 80% Rear axle: twin tyres; left inner tyre tread: 80%; left outer tyre tread: 80%; right inner tyre tread: 80%; right outer tyre tread: 80% Weights Empty weight: 10,236 kg Payload: 3,764 kg Gross vehicle weight (GVW): 14,000 kg Condition Technical condition: very good Visual condition: very good Warranty Warranty: Very well-maintained Mercedes-Benz 1222 fire engine (double cab), ideal for enthusiasts, collectors or for conversion (motorhome / promotional vehicle / expedition vehicle). Technical Data: • Mileage: 38,000 km • Pump hours: 580 hours • Engine: Mercedes 1222 (powerful and reliable) • Transmission: manual gearbox • Chassis: leaf spring suspension (very robust) • Tyres: approx. 80% tread Equipment: • Large water tank • Ziegler FP 16/8 pump (1,600 l/min at 8 bar) • Complete pump system with control panel • Multiple storage compartments • Light mast and blue light • Roof ladder • Original fire service version ✅ Advantages: • Low mileage • Low pump hours • Robust and reliable technology • Ready for immediate use or ideal for conversion • Unique appearance Viewing by appointment Price: negotiable If interested or if you have any questions, please get in touch! Further Information Contact Gerrit Haverhoek for more information.

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle stock, we offer you: TLF 4000/TLF 5000 All-Wheel Drive on all-terrain MAN TGS 18.510 4x4 Chassis Introducing our MAN Mountain Lion! With 510 hp and the all-terrain, single-tired all-wheel chassis, it thrives in demanding environments. Perfect for steep gradients, adverse conditions, and off-road areas far from any road. Chassis: - MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) - Automatic transmission - Single-tire off-road specification for maximum off-road capability Cab: - Standard crew cab (1:5) in RAL 3000 (fire red) - Air conditioning and auxiliary heater - 4 standard SCBA holders in the crew compartment Superstructure: - High-quality modular construction in rust- and corrosion-resistant materials - 4 flexible and spacious equipment compartments per vehicle side - Swing panels for maximum storage capacity - Foldable steps for each lateral equipment compartment - Custom-made stainless steel equipment mountings according to your specifications - Walkable, non-slip vehicle roof Vehicle Pump/Extinguishing Agent Tank: - Maintenance-free combined normal/high-pressure pump FPN 3000-10 - PUMP&ROLL capable - Output of over 3,000 l/min at 10 bar and 400 l/min at 40 bar - Integrated, infinitely adjustable foam proportioning system - Water tank 5,000 l with integrated 500 l foam agent tank - Auxiliary heater in the pump compartment Firefighting Equipment: - High-pressure rapid attack with 50 m form-stable hose - Remote-controlled foam/water monitor on the vehicle roof Rjdpsxl Ab Sjfx Ad Ast - Remote-controlled front monitor - Self-protection system with 4 spray nozzles in front of the wheels Safety & Lighting: - LED light bar on the roof / 2 LED front flashers - Additional blue lights on the superstructure - Pneumatic Martin horn special signal system - 100 W PA system with announcement unit - Rear view camera - Comprehensive LED lighting in crew and all equipment compartments - Perimeter LED lighting on the body and auxiliary headlights - Pneumatic LED light mast with remote control - Hygiene board on request We would be happy to provide you with a detailed offer and present the vehicle to you in Berlin. All details provided to the best of our knowledge without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear Rjdpfxjxk T Efs Ad Ajt • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: like new (used), Year of construction: 2025, operating hours: 320 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 ROK 09/ 2025 2800 BAR GWARANCJA PRODUCENTA Rodpfsvgrpxsx Ad Ast SILNIK DEUTZ TCD 6.1 ST5 140 KW DOSTĘPNY OD ZARAZ

Year of construction: 1996, condition: good (used), Offer drinking water treatment plant Rjdpfx Ajhr D Hnsd Ajt Water treatment plant 120 cubic meters/hour year 1996 functional in 6m container Control system, pumps available. Formerly used as supply for container village.

Condition: new, mileage: 1 km, power: 325 kW (441.88 HP), fuel type: diesel, tire size: 295/80 R 22.5, axle configuration: 6x4, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, color: white, driver cabin: day cab, gearing type: semi-automatic, number of gears: 16, emission class: euro3, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, loading space volume: 20 m³, Year of construction: 2023, = Additional options and accessories = - PTO = Further information = General information Year of manufacture: 2023 Technical information Number of cylinders: 6 Gross vehicle weight: 33,500 kg Axle configuration Tyre size: 295/80 R 22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 7,500 kg; Steered Rear axle 1: Max. axle load: 13,000 kg; Reduction: Outer planetary axles Rear axle 2: Max. axle load: 13,000 kg; Reduction: Outer planetary axles Functional Bodywork brand: EFEMMAK Number of compartments: 1 Pump: Yes Rsdpoxvz Sqefx Ad Aet High-pressure pump: Yes Water installation: Yes Hoses: Yes

Condition: used, Multicar M25 Year of manufacture: 1986 Redpfx Asv Dwraod Ast -with water tank (water truck body) -with spreader body

Condition: used, comprising: base frame, 2 storage tanks, stainless steel, tank vessel by WERIT, reverse osmosis unit, type: SILHORKO, year 1995, control cabinet by RITTAL, with piping system, filtration, pump and valve technology, as well as 2 tipping skips, wheeled/mobile Rjdpfx Adoy Aqchs Aet

Year of construction: 2026, condition: new, functionality: fully functional, ERFOR GR7 Granulator – Efficient Plastic Recycling Solution We offer the ERFOR GR7 granulator – a robust and efficient machine designed for producing high-quality regranulate from plastic materials. An ideal solution for companies looking to process production waste and reduce raw material costs. Key Information: Throughput: up to 700 kg/h Materials: LDPE, HDPE, PP (films, production waste, printed materials) Stable, continuous operation Rjdpfx Adjy Eyrds Aet High and consistent granulate quality Simple and reliable operation Equipment: High-performance plasticizing unit Automatic filtration system Granulation system Compact, industrial design Why GR7: Fast return on investment Reduced material losses Reliable and long service life Configurable to customer needs Condition: New / built to order Manufacturer: ERFOR / Koltex PRS Contact us – we will configure the machine for your material and required capacity.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Rjdpox H Ny Tefx Ad Ajt

Condition: used, tank capacity: 23,600 l, total length: 5,000 mm, total width: 3,000 mm, total height: 1,750 mm, with manhole and outlet; test pressure: 2.3 mWC; previously used as fresh water tank Rjdoycr Nnjpfx Ad Ast

Condition: new, Sand filters for salt water. 59m3 each tank prepared for cleaning with air and pressurized water. Rodpfjgtifqsx Ad Aot Occasion, unused.

Condition: new, functionality: fully functional, type of input current: three-phase, input voltage: 460 V, input current: 109 A, power of the servo motor: 73,500 W, input frequency: 60 Hz, power: 73.55 kW (100.00 HP), cable length: 1,000 mm, control voltage: 460 V, Equipment: type plate available, We offer you a new A-synchronous motor for KMT SLV 100 HP for sale. Please also visit our other advertisements with spare and wear parts, water jetting machines and pumps. Or visit our webshop. For the access data, please contact us by phone or e-mail. As your contact for all things waterjet with 25 years of experience, we can also offer you the following: - Used systems and pumps (used and reconditioned) - Machine relocations - Machine and pump overhaul or refurbish (at your site) - Fast spare parts supply (stock 24/7) - Special solutions in the waterjet sector - Technical and online support (XM Reality) - Qualified software training Rjdpfx Adorwxu Ie Aot - Service, training and maintenance work Calculate your annual requirements with us or secure your maintenance contract and we will guarantee you your TOP price for 12 months. We are already looking forward to making you an individual offer. No matter which application you require - you can count on us! Simply get in touch with us. Our team will be happy to help you.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. Redpoua Tbwefx Ad Ajt SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, This listing is for the Elga Veoli LA757 Labwater Purification The unit is in full working condition and ready for immediate use Designed to deliver high-quality purified water for laboratory applications, this system is compact, efficient, and suitable for analytical and research environments requiring consistent water purity. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Redpfx Asyyn D Dsd Aet • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Rsdpswqlmdofx Ad Ast

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale the CNC WATER JET INTERMAC Type: PRIMUS 184 MARMO Year: 2017 Very good working condition ! Rsdpjyzkh Ujfx Ad Ajt Working area: 2000 × 4000 mm , max. thickness 250 mm. Pressure booster BFT ECOTRON 40. 37 ,the sand filter and the safety light barriers included.The water jet cutting machine is ideal solution for kitchen countertops, as well as for cutting a wide variety of materials, natural and sintered stone, and ceramic materials.

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request Rodpfxewnidhs Ad Ajt - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Condition: Used Invoice: I issue a VAT invoice Rsdpfx Aey Amr Sod Aot Brand: unbranded Type: hydraulic pump Model: Type-CBL 80-200/211 Manufacturer code: 2 Packaging condition: no packaging