Used Cimec Monoblock for sale (246)

Condition: used, Year of construction: 2014, operating hours: 4,848 h, Liebherr Engine D934 A7 – 140 kW (EPA) Weight: 43 tons Undercarriage EW - Width: 3,800 mm - Track gauge: 4,500 mm - Track pads, triple grouser, 600 mm, D6C, 56 links - Two-piece track guide Industrial monoblock boom, straight, Z1, 9.10 m Industrial stick, tip slightly angled, 7.50 m Hoist cylinder damping Active lowering of hoist cylinder Rod protection for piston rods, energy recovery cylinder Auto-lift Engine automatic shutdown Travel alarm, acoustic, non-deactivatable Proportional control (left): medium pressure circuit Joystick hand rest (raised) Roof window wiper Hydraulic cab elevation LHC 255 (from 3.24 m continuously adjustable up to 5.25 m) Narrow platform for LHC 255 Comfort radio Lrjdpfx Akoyffm Seyjn Comfort driver's seat Cab floor window with armored glass Rear area surveillance with camera Work lights cabin front, 2 units, LED 1300 lumens Work lights cabin rear, 2 units, LED 1300 lumens Rotating warning beacon on cab, 1 unit Bypass filter, Liebherr

Condition: new, Year of construction: 2025, New machine Lredpfx Akjy D U A Isyen Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Condition: new, functionality: fully functional, color: orange, operation weight: 2,300 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, HITACHI 23U-6 MTC with an operating weight of approximately 2,360 kg and a FULLY HYDRAULIC 360° OILQUICK OQR30 quick-change system - Base unit 23U-6 MTC - Cab and blade - 230 mm rubber tracks - 970 mm boom - Monoblock boom, laterally adjustable - Leak oil line - Automatic release for hammer/grapple - Hammer/shears and grapple hydraulics > all operated via the joysticks - IFM monitor for switching the auxiliary circuit Attachments: Rotator OILQUICK OQR30-R02 Demolition and sorting grapple, 300 mm cutting width Rigid trenching bucket, 1,200 mm cutting width Grading bucket, 800 mm cutting width Clamshell – deep excavation grapple, 400 mm cutting width Lodpfx Aozg E H Hokyorn Manufacturer's warranty: 60 months or 3,000 operating hours, whichever comes first, in accordance with the manufacturer's guidelines. All wear parts are excluded. Inspection possible at any time. Financing and leasing available upon request.

Condition: used, Year of construction: 2000, Overview This filling monoblock was manufactured in 2000 by Germany MAG Schymanski. The machine is designed for the hot filling of juice and non-carbonated beverages. The system is equipped with 28 filling valves and 4 capping heads. The machine is already dismantled and stored. Technical data Capacity: approx. 3,500 – 6,000 bottles/hour Formats: 0.5 L / 0.7 L / 1.0 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: 28 filling valves / 4 capping heads Lrsdpfxozd S Ixs Akysn

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Lodpjy Dta Sefx Akyjrn

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Ledpox Twdysfx Akyjrn

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · X-Y travel: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm C-axis deactivated – 3-axis machine The base structure is a monolithic construction made of thick-walled steel. It is reinforced throughout the entire machine bed with welded-in triangular plates, which makes it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the key to lasting precision and stability. The machine layout allows the operator an optimal workflow despite minimal space requirements. The resulting base frame thus provides the machining unit with a balanced and secure foundation, ensuring excellent load distribution. The mobile unit carrier is built as a solid monoblock. It is positioned in X-direction on ground prismatic guides with recirculating ball carriages. The working unit is again mounted on ground prismatic guides and a recirculating ball carriage on this mobile unit carrier. Description of aggregates and accessories (basic equipment) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill interface: M 10 with 11 mm fitting Grooving saw unit in X: · Integrated in drill head · Grooving saw blade with max. diameter 120 mm Main milling unit (Position 2): · Tool holder HSK 63F · Speed: 1,500 - 24,000 rpm stepless via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation · Ceramic bearings · Includes: 4 pcs. tool holders (right) without collet Tool changer R8L: Automatic tool changer for 8 tools. Mounted on the rear unit carrier for quick tool access. · Number of tool stations: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total weight all tools: 22 kg · Holder for 1 angle gear Ledpfxex Twccs Akyern · Moves in X direction Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm stepless via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (for saw D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Work table: The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X direction · 12 round vacuum cups D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · Retractable reference stops are CNC controlled · Pendulum machining standard (2 work zones) --- other clamping systems available as options --- Axis movement: The drive system in X, Y and Z is via ground recirculating ball screws...

Condition: used, Year of construction: 2017, operating hours: 25,655 h, machine/vehicle number: LC642, Used KRONES filling glass line for beer 34000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for beer is a high-speed, second hand solution engineered by Krones for industrial packaging and beverage production. Designed for crown cap closures and glass bottle handling, the line delivers excellent throughput and quality control across multiple formats. It is an ideal used bottling line for breweries looking to increase capacity with proven equipment.Production speed: up to 34,100 bphFormat performance: 34,100 bph for 0.33L, 0.355L, 0.45L; 30,000 bph for 0.5L, 0.75LCompatible formats: 0.33L, 0.355L, 0.45L, 0.5L, 0.75L bottlesContainers: Glass bottlesClosure type: Crown capYear of manufacture: 2017Recorded operating hours: 25,655Key equipment: LAVATEC 318 bottle washer; MODULFILL HES 2.880-104-87 filling monoblock; LINAFLEX LB24.7-523-41 tunnel pasteurizer; SOLOMATIC 1.200-30 labeling machine; LINATRONIC M and CHECKMAT inspection systems; SYNCO S/MULTICO S/PALCO S conveyingAdvanced Automation & Control SystemsThe line integrates Krones inspection and control technologies to ensure stable operation and consistent quality. LINATRONIC empty bottle inspection and multiple CHECKMAT inspection stations monitor critical points including fill level, label presence, and crate quality. Network technology and IT hardware, together with UPS and electrical distribution, support reliable automation. Fast format transitions, centralized controls, and integrated cap feeding optimize uptime and reduce changeover times.Production Line Integration CapabilitiesEngineered as a fully integrated production line, this system includes depalletizing, unpacking, crate washing, bottle washing, rinsing/inspection, isobaric beer filling with crown capping, pasteurization, drying, labeling, case packing, full-crate inspection, and end-of-line palletizing. Comprehensive conveyor systems—SYNCO S for bottles, MULTICO S for crates, and PALCO S for pallets—ensure smooth material flow. The line handles multiple beer bottle sizes from 0.33L to 0.75L, enabling multi-SKU flexibility for beverage production.Machine Condition & Maintenance HistoryThe line remains powered and can perform a dry run, making it ready for operation upon installation. Operating hours are documented at 25,655. Manuals and the complete layout are available, supporting efficient planning, commissioning, and maintenance.Operational Performance & VersatilityOptimized for beer in glass bottles, the MODULFILL HES monoblock provides precise isobaric filling and reliable crown capping at high speed. Upstream, the LAVATEC bottle washer and LINATRONIC inspection protect product quality and packaging integrity. Downstream, the LINAFLEX tunnel pasteurizer, LINADRY bottle dryer, SOLOMATIC labeler, and CHECKMAT inspectors deliver consistent presentation and compliance. Integrated crate handling (unpacker, crate washer, magazine, full/empty crate inspection) and robust end-of-line systems (SMARTPAC packer, PRESSANT palletizer) complete an industrial packaging solution.Installation Re... Ledpfx Akozd Ufysysrn

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesThis second hand packaging machinery set integrates smoothly as a turnkey used bottling line. Infeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still... Ljdpfozd Ucxsx Akysrn

Condition: used, Year of construction: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data Manufacturer: Krones AG Machine Type: Filling and capping monoblock Model / Identification: Krones Modulfill Year of Manufacture: 2012 Application: Filling and closing of glass bottles Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) Filling System: Volumetric filling Filling Valves: 60 Capping Heads: 12 Closure Type Observed: Plastic screw cap Target Output: approx. 15,000 bottles/hour Operating Hours: 41,381 h Production Counter: 40,754 h Control Interface: Krones iPanel CD Electrical Supply: 400 / 230 V Current Type: AC 3/N/PE Frequency: 50 Hz Full Load Current: 36 A Construction: Stainless steel and glass safety enclosure Condition: Used, observed in operational production environment Lrodpfxozcga Ue Akyon

Condition: used, Year of construction: 2025, Overview This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Technical data Capacity: approx. 70 cans/min (500 ml) approx. 100 cans/min (250 / 330 ml) Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) Application: Filling and seaming of cans (beer, soft drinks, RTDs) Configuration: 10 filling valves / 2 seaming heads Filling system: Counter-pressure filling Filling pressure: approx. 0.15 – 0.4 MPa Filling temperature: approx. 1 – 4 °C CO₂ management: Pre-purging and undercover gassing, oxygen reduction system Seaming system: Lid size 202 (200 optional), manual lid feeding Control system: Siemens S7-1200 PLC with HMI touchscreen Drive system: Frequency inverter (Danfoss), unified drive Utilities: Power consumption: approx. 5 kW Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa CO₂ supply: ≥ 0.3 MPa Water consumption: approx. 0.2 m³/h Dimensions: approx. 3,153 × 1,980 × 2,350 mm Weight: approx. 5,500 kg Scope of Delivery Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer Control system | Siemens | S7-1200 | PLC with touchscreen HMI Drive system | Danfoss | Frequency inverter Filling valve cores | 1 set Seaming rollers | 1 set (#1 and #2) Seaming chuck | 1 unit Can mouth seals | 10 units Filling valve seals | 10 sets Ljdpfozbhi Ijx Akysrn

Condition: used, Year of construction: 2012, machine/vehicle number: LC647, Used Sidel complet filling line for water, PET 36000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-efficiency PET still-water production system engineered for industrial packaging and beverage production. Designed around a 0.55L format and the 30/25 PCO1881 neck finish, it delivers a nominal output of 36,000 bottles per hour. Major equipment includes a Sidel SBO20 blow molder with 20 cavities, a Sidel EUROPA WM filling monoblock configured with 60 filling valves and 15 capping heads, and a Krones Contiroll HS labeling machine for continuous high-speed labeling. The line is a robust second hand solution for producers aiming to scale PET water operations with proven reliability.Production speed: 36,000 bph (design format 0.55L)Primary format: 0.55L (550 ml) bottlesNeck finish: 30/25 PCO1881Containers: PET bottlesBlow molder: Sidel SBO20, 20 cavitiesFilling monoblock: Sidel EUROPA WM, 60 valves / 15 capping headsLabeler: Krones Contiroll HSCap feeding: Sidel Aidlin 24 cap feederLine year: 2012 (core filler unit 2011)Advanced Automation & Control SystemsThe line integrates synchronized control between the blow molder, filling monoblock, cap feeding, and labeling systems to maintain stable, high-speed operation. Central operator interfaces coordinate start/stop sequences, speed ramps, and fault diagnostics. Safety interlocks, guarding, and emergency stops protect operators while ensuring consistent uptime. Quick adjustments and recipe-based parameters support repeatable setups for the 0.55L format, minimizing changeover downtime and optimizing overall equipment effectiveness.Production Line Integration CapabilitiesEngineered for inline operation, this PET bottling equipment connects via conveyor systems with accumulation and transfer sections for smooth product flow. The configuration supports still water applications with the 30/25 PCO1881 neck finish, enabling efficient handling from preform feeding and blow molding through filling, capping, and wrap-around labeling. The system architecture allows integration with upstream and downstream equipment such as inspection, case packing, and palletizing to form a complete beverage production and industrial packaging solution.Machine Condition & Maintenance HistoryThe line is still in production, indicating maintained operability and continuous performance under real operating conditions. Components have been kept in working order to support ongoing output. This second hand PET water line benefits from active status, helping prospective users evaluate performance and plan for a smooth transition to new production requirements.Operational Performance & VersatilityOptimized for still water, the Sidel EUROPA WM monoblock combines precise filling with consistent capping torque control across 15 heads. The Sidel SBO20 blow molder provides reliable preform heating and stretch-blow performance across 20 cavities for stable bottle quality at high speeds. The Krones Contiroll HS delivers continuous, high-speed labeling accuracy suitable for demanding PET... Lrjdpfx Ajzc Hqmokysn

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK MEDIA The Minipack MEDIA is a compact, semi-automatic packaging machine featuring L-shaped sealing and an integrated shrink tunnel. Its monoblock design makes the machine particularly space-saving. – Teflon-coated sealing bars for reduced smoke emission – Production capacity up to 750 pieces per hour – Sealing bar dimensions: 540 × 400 mm – Max. film roll width: 600 mm Ledjx Ttbhopfx Akysrn – Max. film roll diameter: 350 mm – Tunnel entry dimensions: 440 × 240 mm – Working table height: 875 mm – Machine dimensions (closed): 2,780 × 730 × 1,400 mm – Machine weight: 286 kg (net) – Motorized waste rewinder as standard

Condition: used, Used bottling line Cortellazzi for CSD in PET bottles – 8000 bph General overview of the line The used Cortellazzi bottling line for carbonated soft drinks in PET bottles 8000 bph delivers an integrated solution for producing soft drinks and sparkling water in 0.50 L and 1.5 L containers. Specifically designed for industrial environments, the system provides a complete technical configuration. It maximizes production efficiency and ensures operational safety by including protection devices and quality control systems at every stage. Moreover, the layout supports continuous operation with minimal downtime. Filling unit and blow molders The Cortellazzi Fintec VEGA 40.70.10 isobaric filling monoblock 1998 handles carbonated products while maintaining constant pressure during the filling process. As a result, the system preserves CO2 content and prevents product loss. Two separate blow molding machines feed the containers. A Sidel SBO8 from 1999 ensures continuous high efficiency production, while a Kosme KSB-4000 from 1998 serves as a backup or support unit. In addition, both machines allow quick format changes and stable operation under load. Carbonator and CO2 management The Cortellazzi Kristal Mix 1998 controls carbonation and saturates the product with CO2. Consequently, the unit ensures consistency and stability throughout the filling phase. Notably, it also supports fine tuning of pressure and temperature parameters. Labeling and customization Ledpfx Aswukuzokyern Three labeling systems carry out specific functions. The Kosme Ekstrahotmelt 12TS1E1 1998 applies labels using hot melt glue. Meanwhile, the KHS Carmichael 1995 handles traditional label application. Furthermore, the Esleeve ESM 3200M 2004 applies shrink sleeves to PET containers in various formats. Together, these machines offer flexible labeling solutions for different product lines. Quality control and heat tunnel The Krones Miho module 2008 inspects containers and labels, detecting any defects or irregularities. If necessary, the system can reject non compliant items without interrupting the production flow. Then, the Krones Shrinkmatt 3000 tunnel 2008 uses steam to shrink the sleeves uniformly onto the containers. In particular, this tunnel guarantees even heat distribution, preventing sleeve distortion. Secondary packaging The Dimac Bluestar F30 2007 wraps products into shrink film with speed and precision. As such, this unit optimizes grouping and prepares the packs for palletizing. Additionally, it minimizes material waste and ensures a clean wrap. Handle and cap application The Twin Pack MGE 1997 applies handles to the grouped bottles. Simultaneously, the Bortolin Kemo 1997 feeds caps consistently and ensures uninterrupted sealing of containers. This way, the two systems maintain rhythm and alignment on the line. End of line and automation The Keber Meg Arm palletizer 1998 arranges the finished packs onto pallets.

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Lsdpfjcr S Ecsx Akyern Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Ledpsgf Sw Nofx Akyern Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: used, Year of construction: 2004, machine/vehicle number: SO137, Used Sidel blow molding Combiblock for PET 18000 BPHTechnical Specifications & Performance DataThe Sidel SBO 16 Series 2 Blow Molding Machine is a rotary PET blow molder engineered for reliable, high-quality container production within used bottling line and industrial packaging environments. Built in 2002, this second hand blow molder features 16 cavities for efficient, continuous operation. It is delivered with an air recovery system to improve energy efficiency and operating economy. A complete set-up for the Alaska neck finish is included, enabling fast start-up for compatible formats. Please note that molds are not included and a chiller is not supplied with the machine.Manufacturer: SidelModel: SBO 16 Series 2Year: 2002Machine type: Rotary blow molding machineNo. of cavities: 16 (molds not included)Container material: PETNeck finish set: AlaskaAir Recovery System: IncludedChiller: Not includedAdvanced Automation & Control SystemsThis rotary platform supports steady, continuous motion for stable heating and blowing cycles. Integrated machine controls streamline changeovers and monitoring, while the air recovery system enhances sustainability and lowers compressed air consumption during beverage production. Quick adjustments for the Alaska neck finish reduce downtime across multi-format industrial packaging operations.Production Line Integration CapabilitiesThe SBO 16 Series 2 is designed for seamless integration into a complete beverage production line. It pairs effectively with filling and capping equipment for high-throughput second hand bottling applications and can operate inline with conveyors, inspection, and downstream packaging machinery. The machine is well suited for PET bottle handling and can be configured for a range of bottle sizes depending on installed molds and process parameters. It is compatible with monoblock and combi configurations, including gravity filling solutions and pick-and-place cap distribution systems.Machine Condition & Maintenance HistoryThe overall combi configuration associated with this blow molder was refurbished at the end of 2024, supporting reliable, ready-for-operation performance for used bottling line projects. As a second hand unit from a reputable manufacturer, this machine offers proven durability and straightforward maintenance with widely available spare parts and technical support.Operational Performance & VersatilityWith 16 cavities and a rotary architecture, this blow molding machine provides the throughput and consistency required for beverage production and other PET packaging tasks. The included Alaska neck finish capability allows targeted format production, while additional neck finishes can be accommodated with the appropriate tooling. The air recovery system improves operating efficiency, making it a strong choice for cost-optimized industrial packaging operations seeking lower compressed air usage without compromising quality.Installation Requirements & Site PreparationInstallation typically requires utilities common to PET blow moldi... Ljdpjzccgdjfx Akyern

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Ljdpevbqv Hsfx Akysrn Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis Lrsdpfx Ajxxvp Njkysn + No foundation required + Glass scales in X, Y, and Z linear axes + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves Lrsdpfx Akecvkaloyjn The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit Lsdpowr T E Dsfx Akyorn In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: used, Year of construction: 2018, Are you in search of a bridge type milling machine? With X-travels ranging from 2-15m, Y-travels up to 4m, and Z-travels up to 2m, we offer a versatile selection of machines to meet various machining requirements. Whether it's CNC universal heads, W-axis, rotary table, tool changer, or controls from renowned manufacturers such as Siemens, Fanuc, and Heidenhain, our extensive range of accessories allows for maximum flexibility and efficiency. Take a look at the PDF catalog below! Discover the ultimate precision and robustness of our refurbished CORREA portal milling machines, meticulously restored by our experts in Spain. These machines have been meticulously inspected and tested according to the highest standards, guaranteeing top-notch machining quality. An outstanding example is our used CNC portal milling machine VM 2018, equipped with the proven Heidenhain control. With impressive performance data and detailed technical features, this machine has everything you need for precise and efficient machining. x-travel: 2300 mm y-travel: 2000 mm z-travel: 1000 mm Table size: 2300 x 1600 mm T-slots (width x spacing x number): 8x 22 x 180 mm max. table load: 8 t Distance between columns: 1840 mm Distance between spindle nose and table: 180~1180 mm Lredpfehx R Dkox Akyjn Spindle motor: 22/46 kW Spindle torque: 140.1/286.5 Nm (S6-25%) Spindle nose: 50 SK Spindle speed: 10000 (direct) rpm Rapid traverse X, Y: 20000 mm/min. Rapid traverse Z-axis: 15000 mm/min Milling feed range: 1~10000 mm/min Machine size (LxWxH): 7027 x 5217 x 4339 mm Total power requirement: 60 kVA Machine weight approx.: 25 t CNC control: Heidenhain TNC 620 Chip conveyor with chip container: 2 pcs spiral, 1 pc hinge belt Through-spindle coolant: 20 bar CE version: Certified by TUV Used CNC portal milling machine with HEIDENHAIN 620 TNC control and extensive accessories, featuring: - Monoblock cast iron machine bed and monoblock crossbeam provide highest rigidity for precise machining results. - The entire structure has been optimized for rigidity and precision through FEM analysis. - P-class feed roller linear guides allow maximum load capacity with a lower friction coefficient (0.003-0.006). They ensure smooth operation through optimized roller circulation and guidance, reducing energy consumption. - The double-nut C3 ball screws ensure precise milling even for heavy loads. - Spindle direct drive with 10,000 rpm and SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%). (22 kW continuous power, 46 kW for 30 minutes overload) - Spindle torque corresponds to 140.1/286.5 (S6-25%) Nm - Two spiral conveyors and one chain chip conveyor effectively remove chips. All essential components are sourced from reputable manufacturers in Europe, ensuring reliable, short-term, and long-term availability of spare parts. Don't miss the opportunity to optimize your production processes and invest in high-quality milling technology. Experience the difference that our portal milling machines offer - reliable, durable, and ready to tackle your most demanding tasks. Contact us today and let our experts guide you.

Condition: used, Year of construction: 2018, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 50, Used CNC portal milling machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Storage location: Germany Delivery time: short term Payment: 100% before loading Warranty: none Machine description The KRAFT VM-2018B is a precise and powerful CNC portal milling machine with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining processes. Thanks to its robust design and high-quality components, it is ideal for demanding milling tasks in tool and mold making as well as in series production. Highlights & features Monoblock cast iron bed and cross beam for maximum rigidity and precision FEM-optimized machine design BF gearbox with 26 kW motor for high torque (662 Nm) Feed roller linear guides P-class (very low coefficient of friction 0.003-0.006) C3 ball screws with double nut - high load capacity & accuracy Spindle: SK50, 10. 000 rpm, direct drive Heidenhain TNC 620 control Spindle cooling & IKZ 20 bar Coolant system, oil separator, air conditioning for control cabinet Full enclosure, TÜV-approved, CE-compliant Technical data Travel (X/Y/Z): 2,300 / 2,000 / 1,000 mm Table size: 2,300 × 1,600 mm T-slots: 8 × 22 × 180 mm Max. Table load: 8 t Ledpewkg T Sofx Akyorn Distance spindle nose - table: 180-1,180 mm Rapid traverse X/Y: 20,000 mm/min Rapid traverse Z: 15,000 mm/min Feed range: 1-10,000 mm/min Positioning accuracy (VDI/DGQ3441): 0.020

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration Lrjdpfx Ajy Uhxkekysn - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Lrodpfx Akoxy Tmnsyen