Used Cipsy 10/25 Saw And Cutter Grinder for sale (52,834)

Condition: good (used), Back off carbide saw grinder VOLLMER model NS700 Fsdpegqalcsfx Afuepn

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Fsdpevvlyiofx Afuspn Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: ready for operation (used), Manual spindle press / 25 tons Fpjdpfx Afozcxdlousn -Clearance between columns: 400mm -Spindle diameter: 80mm -Vertical clearance: 420mm -Various clamping jaws Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight: 700kg Errors and omissions excepted.

Condition: excellent (used), Carbide saw back off grinder VOLLMER model AS810 Fodpfx Aoiaca Sjfujpn

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Five-axis tool grinding machine in very good condition for sale due to lack of use! Fjdpfx Aoxw Sxkefuopn

Condition: excellent (used), Carbide saw grinder VOLLMER model CX100 Fpsdpfx Afoigaf Usuen

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Fpodpjd Hx Hmsfx Afuen Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: excellent (used), HSS saw grinder WERKO Fsdoipid Tjpfx Afuopn

Year of construction: 1966, condition: used, machine/vehicle number: 12558, Saw motor, 2.2 kW 40 mm spindle Fsdpfxjigab Ro Afujpn Sliding carriage with short Festo Superfix Milling stop with fine adjustment, without dust extraction port Dust extraction with slotted hood, 140 mm Cable + plug, 16 A

Condition: like new (used), Carbide saw side grinder VOLLMER Model MF600 Fpedjfu R Smspfx Afuen

Condition: good (used), Uchida BC 10 Business Card Cutter The UCHIDA BC-10 business card cutter is a business card cutting machine that works in conjunction with any high-quality digital copier or printer to automatically, easily, and quickly produce professionally cut business cards. Whether you are a small business or a large corporation producing hundreds of cards per day, the innovative features applied to the UCHIDA BC-10 will meet every need. • Designed exclusively for business cards from A4 paper • Up to 100 business cards per minute • Simple and fast operation Specifications Processing speed: 10 sheets per minute (100 business cards) Paper size: A4 Fpsdpfx Asivd Aiefuon Paper type: Offset, coated, glossy paper Tolerance: ±0.1 mm Item condition: used Scope of delivery: as shown in the picture (without sheet feeder & trash box) You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Continuously adjustable feed rate Automatic lubrication system Anti-recoil protection Fpjdpfezhulbox Afuen Culaga Dust extraction port: 215x120 mm Safety switch Power supply: 380 V Main motor power: 23.2 kW Overall dimensions: Length: 2300 mm Width: 1400 mm Height: 1350 mm

Condition: used, Technical specifications: Track width: 180 mm Max cutting height: 100 mm Max saw blade diameter: 350 mm Automatic lubrication system Anti-kickback protection Culaga (likely a specific brand or component – retain as is unless further context is provided) Safety switch Power supply: 380 V Main motor power: 18 kW Overall dimensions: Fpedpfx Afozhul Iouon Length: 1900 mm Width: 1000 mm Height: 1550 mm

Condition: refurbished (used), functionality: fully functional, IDEA SMH 060 Band saw blades weld grinding machine for deburring burr after welding with pneumatic holder of strip. Grind blades width up to 60 mm. Made in Germany. Fjdpfsz Hl Etjx Afujpn

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Fpodeq Dzi Tjpfx Afujn Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, machine/vehicle number: 13983, Year of construction: 2019, operating hours: 2,208 h, load capacity: 1,500 kg, lifting height: 3,000 mm, load center: 500 mm, fuel type: electric, mast type: simplex, construction height: 2,050 mm, fork length: 1,150 mm, front tire size: 18x7-8, rear tire size: 140/55-9, overall weight: 3,097 kg, Equipment: 3rd hydraulic function, cabin, Wartung und UVV-Prüfung neu Batterieladegerät inklusive Batterie NEU 10/2025 Serial Number: FN608467 Fpedpfx Aew R Ai Ijfuen Wartung und UVV-Prüfung neu Batterieladegerät inklusive Batterie NEU 10/2025

Condition: used, Technical specifications: Max. saw blade diameter: 400 mm Scoring blade diameter: 120 mm Fsdpfx Afjzd Ehfsuepn Scoring blade powered by a separate motor Manual saw blade height adjustment Tilting saw blade from 0° to 45° Manual saw blade tilt angle adjustment Table length: 3200 mm Table lock Table extensions Fence Guide rail with 2 stops Safety switch Power supply: 380 V Main motor power: 5 kW Overall dimensions: Length: 3260 mm Width: 3300 mm Height: 1000 mm

Condition: used, Max saw blade diameter: 400 mm Min saw blade diameter: 250 mm Saw blade spindle diameter: 30 mm Scoring blade diameter: 125 mm Scoring blade spindle diameter: 20 mm Scoring blade with separate motor Electric saw blade height adjustment Tilting saw blade from 0° to 45° Manual saw blade tilt angle adjustment Table length: Table lock Work table: Table extensions Dust extraction port diameter: Fpodszh Hcxspfx Afuen Dust hood: 3000 mm long fence with 2 stops Guard Safety switch Power supply: 400 V Motor power: 4.5 kW Saw blade speed: 5000/4200/3200 rpm Manufacturer: CASOLIN Overall dimensions: Length: 3420 mm Width: 3780 mm Height: 1600 mm

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Fodpozvmx Aofx Afuepn Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: excellent (used), HSS saw grinder LOROCH model KRD710 Fpjdpfx Afsyg Nxhoujn

Condition: used, Year of construction: 2016, Pneumatic press Manufacturer: Schmidt Type: 25-100-3K Year of manufacture: 2016 Nominal force: 12.5 kN Stroke: 100 mm Fodpjz Hlzhsfx Afujpn Includes SCHMIDT PressControl 75 in the two-hand safety version Weight approx.: 45 kg 51026ä

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2NT01193, total length: 1,800 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 220 V, product width (max.): 330 mm, Equipment: documentation/manual, double-sided, Canon imagePRESS'es C710, C650 and C910 – a reliable and high-performance digital production presses ideal for commercial print shops, in-house print rooms, and professional graphic environments. Features Outstanding image quality Fsdpfx Asurbwxofuopn Handles a wide range of media types and weights Suitable for brochures, flyers, booklets, marketing materials, and short-run production User-friendly touchscreen interface Condition Fully operational and well maintained, in excellent condition. The machines always serviced by Canon engineer with genuine parts, service history available if required Paper trays standard: 3 x sheet cassettes, Stack Bypass-C1: Multi-purpose tray/ for Long sheet) POD Deck Lite D: (A4/ A3/SRA3) Fiery Print Controller on board x 1 Prisma Sync x 2 Paper Size Length: 148 mm – 487.7 mm Width: 98.4 mm – 330.2 mm Up to 350gsm Duplex Colour Image Scanner with automatic document feeder Power Source 220-240 V Measurements Height 120. With touch control panel 145 Width 180 Depth 100 Machines always serviced by Canon. Discount offered if all 3 machines are bought. Available for inspection OPEN TO OFFERS

Condition: good (used), Year of construction: 1994, Arburg Thermonic Temperature controller (model SI FF 10 G250/300) Fpjdpfxezl Sbno Afujn The device features an analog rotary knob for setting the target temperature in Celsius and Fahrenheit (range 50°C to 450°C), as well as three LED displays for monitoring the temperature deviation.

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Fpodotyyn Hepfx Afuon

Condition: used, Technical specifications: Saw blade diameter: 300 mm Manual blade feed Angle cutting capability Power supply: 400 V Motor speed: 2800 rpm Motor power: 1.1 kW Overall dimensions: Length: 530 mm Width: 530 mm Fedpfozikmqsx Afujpn Height: 520 mm