Used Construction Circular Saw for sale (30,073)

Condition: good (used), Year of construction: 1985, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm Pgjdpsz Hwc Rjfx Ai Tsu -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Condition: used, Year of construction: 2018, saw blade diameter 550 mm weight ca. 650 kg Under-table saw for aluminum and PVC Pedpfjzvhm Uox Ai Tjgu Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition! The saw was rarely used; it served as a backup machine

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades Pgsdpow I Sg Djfx Ai Teu • Saw shaft fitted with new bearings • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting Podpfeuqk Azsx Ai Togu 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw

Condition: used, saw blade diameter 450 mm capacity 90 degrees: round 130 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 210 x 170 mm capacity 45 degrees: square 145 x 170 mm turning speeds 2900 U/min total power requirement 2,3 kW weight of the machine ca. 600 Kg dimensions 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine Pedpsyfwxaofx Ai Tegu - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue!!

Condition: used, Rip saw - Saw for lengthening boards. - Manufacturer: omega T55 300 - Year: 1996 - Electric motor Pjdpfx Aijtq Ebls Tsgu - Frequency counter

Condition: used, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop Pgedpforub S Uex Ai Tou - Machine feet

Condition: used, Year of construction: 1976, functionality: fully functional, Year of manufacture: 1976 Pgodpfxjz Ruhmj Ai Tou Machine was modernized in 2020.

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min total power requirement 2,2 kW Podpfey N D Nhjx Ai Tegu weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Pgodpfx Aiswrb U Tj Tju

Condition: new, Year of construction: 2022, Cutting length: 2500 mm Cutting width at the rip fence: 1250 mm Pgsdpfx Ajid Igqei Tou Cutting width at the crosscut fence: 2550 mm Cutting depth: 125 mm Scoring saw: yes Saw blade height adjustment: electric Saw blade swivel adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Dust extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1000 kg

Condition: new, saw blade diameter 400 mm capacity 90 degrees: round 125 mm capacity 90 degrees: flat 170 x 125 mm capacity 45 degrees: round 122 mm capacity 45 degrees: square 120 mm turning speeds 3000 U/min engine output 2,2 kW Pgedoz Ek Azepfx Ai Teu weight of the machine ca. 95 Kg dimensions 0,8 x 0,6 x 1,5 m Aluminum circular saw - Pneumatic workpiece clamping system - Micro-spray system

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Pgsdpfx Aevxi Ddji Teu Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: good (used), Year of construction: 1988, Saw blade dimensions: 275 x 3.3 x 40 mm Cutting capacity for straight cuts: Profiles and angles/pipes/solid material: 65 x 130/90/60 mm For miter cuts: Flat profiles and angles/pipes: 75 x 90/90 mm Psdpjzvw Uhjfx Ai Tjgu 2 saw blade speeds: 2000/4000 rpm Drive motor: 380 V, 1/1.2 kW Space requirement: 750 x 450 x 750 mm Weight:

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scoring unit: no Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Maximum saw blade diameter: 550 mm Saw blade diameter, fully retractable under table: 500 mm Motor power: 9 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3500 mm Machine width: 2000 mm Pgedpfx Ajwm Nrcoi Teu Weight: 900 kg

Condition: new, Year of construction: 2026, Cutting length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 1565 mm (telescopic extension up to 2550 mm) Cutting depth: 170 mm Scoring cutter: no Sawblade height adjustment: handwheel Sawblade pivot adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: - Width stop indicator: scale Crosscut ruler indicator: scale Sawblade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Pgjdpoqx Igqsfx Ai Teu Motor power: 9.2 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 2900 mm Machine width: 1800mm Weight: 800kg

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1811001, type of input current: three-phase, overall weight: 110 kg, input voltage: 400 V, Equipment: emergency stop, Abrasive cut-off saw manufactured by Vertex Machinery Works Co., Ltd. The unit was produced in 2018 in Taiwan. Pedpfx Ajz Sutxoi Tsgu The machine is mounted on a dedicated, blue workshop base. Technical data: Manufacturer: Vertex Machinery Works Co., Ltd. Country of manufacture: Taiwan Year of manufacture: 2018 Serial number (S/N): 1811001 Motor power supply: 400 V / 50 Hz Number of phases: 3 PH (Three-phase) Machine weight: 110 kg Compliance mark: CE Design and equipment: The machine has a manual clamping lever and a vise for securing the workpiece. The cutting part is equipped with an abrasive disc (a close-up photo shows a Tyrolit disc). The steel base is equipped with a lower shelf made of perforated sheet metal.

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm Pjdpfx Aod Iinysi Tjgu capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom!! Roller conveyors optional!! Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry

Condition: new, Year of construction: 2025, Slider length: 3200 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Rotational speeds: 3000 / 4000 / 5000 RPM Pedoiv Hdvjpfx Ai Tjgu Motor power: 7 kW Motor brake: yes / automatic Dust extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Straight cut, range 105 x 105 mm, round = 120 mm Motor: 1.7 / 2.2 kW Saw blade size: 350 mm Pgodpez S U R Rofx Ai Tju Saw blade speed: 1400 / 2800 rpm Pneumatic tensioning.

Condition: used, Technical details: saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 Pedpfju Nif Tex Ai Tegu feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) *

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head Pedpfsxaa Hnox Ai Togu - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: excellent (used), Catalog number: 7548 TECHNICAL DATA track width 250mm roller width 250mm max. blade diameter 350mm blade bore diameter 80mm max. cutting height 120mm table width with clearance 700mm table length 1790mm *from above: rollers pressure roller, smooth rollers pressure roller, smooth saw blade roller smooth pressure rollers 2 pcs from below: guide rail sliding roller, smooth rollers track central lubrication feed motor 1.1kW main motor 30kW electric lifting of the machine body manual lifting of the saw blade roller diameter of the extraction nozzle 160mm Pgodpfx Aiezwwuqs Teu overall dimensions L/W/H 2250x1700x2000mm approximate weight 3000kg – German made – electric lifting of the machine body and roller – smooth adjustment of feed speed – multi-blade saw, used, very good condition Net price: 68900 PLN Net price: 16023 EUR depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Professional sliding table saw in heavy-duty design Psdezlbq Sopfx Ai Tsgu - with scoring unit; externally adjustable with separate drive motor - format sliding carriage made of anodised aluminium with a proven and permanently smooth-running ball contact system on hardened guideways (10-year manufacturer's warranty from date of first commissioning) - saw rip fence with round-bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - table extension - table widening - with integrated on/off switch on the sliding carriage - with motorised height and tilt adjustment of the saw unit, digital display for tilt - programmed control of the saw blade height and tilt and the position of the rip fence - swivelling control panel at eye level - Made in Italy quality - Trimming length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Cutting-to-length width to the left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Tilt of the saw blade: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring saw blade: 120 mm - Speed main saw blade: 3500/5000 rpm - Speed scoring saw blade: 9200 rpm - Dimensions format sliding carriage: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Motor power scorer: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: at short notice Storage location: Röllbach

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1000 mm Pgjdpoxzfw Iofx Ai Tou Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade tilt display: Scale Cutting height display: - Rip fence display: Scale Crosscut fence display: Scale Maximum saw blade diameter: 550 mm Saw blade diameter fully retractable below table: 500 mm Motor power: 9 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3500 mm Machine width: 2000 mm Weight: 900 kg