Used Cpu for sale (238)

Condition: excellent (used), Year of construction: 2007, Amada EM2510NT electric punch, 45 Station Turret with 4 Auto indexing units 2008 Year of manufacture Country of Manufacture: Japan Bridge Type 20 tonnes (196kN) Giedeyylm Nspfx Ahvsu High speed AC servo direct twin drive 1270 x 2500mm 1270 x 5000mm 3.2mm mild steel 150Kg max sheet weight mm 45 Stations Turret Turret Stations: 24 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm) 128 m/min

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 4,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Cjays Tig 200E ACDC – Gas-cooled TIG ACDC 3 Months Warranty Specifications: 5-200 AMP 230 Volt 2/4 Step Pulse / Pulse Frequency Pre gas / Post gas Start current / End current Up slope / Down slope AC Balans Elektrode option Including: SR17 Welding torch, ground cable with clamp, gas cable, and manual. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Gsdjyzpc Depfx Ahveiu The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: ready for operation (used), A surface cooler with various small appliances is available. 1) Surface cooler Heatcraft Europe FC PU06DL02D3 1C4 33 B, volume flow: 62dm³. 2) KSB pump, year of manufacture: 2020, output: 4kW. 3) Lifting machine for coil holder Oerlikon HM-2529. 4) Blower Ferrari FR 1001 N04S/3RD 90, year of manufacture: 2019, speed: 1500 rpm, max. temperature: 100°C, power: 75kW. Documentation available. On-site inspection is possible. Gsdpfxsuanr Do Ahveiu

Condition: ready for operation (used), EWM Phoenix 351 Basic Plus KW welding machine For technical specifications, please refer to image no. 2. You are welcome to visit and inspect the machine. We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you supply a valid VAT identification number. Subject to prior sale. Giodpfx Ahsyh Az Aevju Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations from the technical specifications as well as errors in the item description may occur and are subject to change.

Condition: used, Year of construction: 1982, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card boardUV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Online-Video-Inspection by Skype-Video Giodpfxoh Ayfpj Ahvou We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Output module, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: BuR Giedpfxecc Huue Ahvsu -Type: CPU10 -Number: 1x control cards available -Price: per piece -Dimensions: 220/140/H40 mm -Weight: 0.47 kg

Condition: like new (used), Exceptional machine for professional TIG welders WELDKAR The TIG 320 AC/DC Pulse features a 320 Amp power source (60% duty cycle) at 400 Volts. Under continuous operation, the maximum welding current is 250 Amps. This TIG welder is perfectly suited for (medium to) heavy industrial work and series production. - WK TIG 320 AC/DC Pulse power source with EMC - WK MIG 5040F / WK TIG 320 AC/DC water cooler – 5 liters - Chassis for WK TIG 320 AC/DC Pulse - Tig welding torch WK 18 – 4 meters, water-cooled - Inline water unit WK MIG 5040F / WK TIG 320 AC/DC - Wireless remote control for WK TIG 320 AC/DC Pulse - Foot pedal for WK TIG 320 AC/DC Pulse - Welding cable set 300A WKP 35-70, 35mm² Gsdsxf Nvpspfx Ahvsiu - Ground cable set 300A WKP 35-70, 35mm² NET PRICE: 10,500 GROSS PRICE: 12,915

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, The new price of the machine was €650,000! TECHNICAL DETAILS Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump operation Ambient temperature: above 10 °C Belt System Belt direction: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel transverse belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Airflow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manual with air or hot gas Evaporator surface: 311 m² each Airflow rate: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heating: 4 x 0.72 kW Defrost interval: sequential Heating in the basin: hot gas Control System and Control Cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to refrigeration system: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Control cabinet: Stainless steel on stainless steel base Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm lamp: visual, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guides for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Gjdpfxezardts Ahveiu Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Maintenance-friendly accessibility SEW main drive with Danfoss frequency inverter SEW overdrive with Danfoss frequency inverter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel base Freezer LED lighting controlled via the touch panel Welded stainless steel floor pan with slope and drain outlets Underfloor protection heating with reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator tubes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the block Sequential defrosting Inspection hatch in the fan box Remote maintenance Ethernet

Condition: new, Schleicher UCN2 (B) No. 31309121 120 Master CPU Numerical Control, serial number, unused in opened original packaging, 100% functional, scope of delivery as per photos. Gedpfx Asx Eub Tjhvjiu

Condition: repair required (used), Year of construction: 2011, functionality: limited functionality, machine/vehicle number: 82141121, measuring range X-axis: 505 mm, measuring range Y-axis: 705 mm, measuring range Z-axis: 405 mm, workpiece weight (max.): 180 kg, total height: 2,200 mm, total width: 1,080 mm, total length: 1,460 mm, input voltage: 220 V, table width: 638 mm, table length: 1,160 mm, table load: 180 kg, pressure: 0.4 bar, clearance between the columns: 680 mm, Equipment: type plate available, *The machine has a non-functional sensing module – investment required. The module malfunctioned shortly before being taken out of service. We prefer to purchase the entire machine without any warranty on defects, but we can also provide spare parts for the same type of machine. Measuring system/position control: type CMMC-J, optoelectronic glass scales, and speed control using a pulse generator. Operating modes: CNC operation and/or joystick control. Measuring software: MCOSMOS-3. v4.1.R4 HW key options: GEOPAK, CAT1000P, CAT1000S, SCANPAK, Laser Probe support, Special statistical output, STEP, Scanning touches, Run MiCAT part program PC system: Windows 7. Processor: Intel(R) Core(TM) i5 CPU 660 - 3.33GHz, 3.47 GHz. Installed memory: 4 GB RAM Sensing system: RENISHAW SP25M, RENISHAW SM25-1. Rotary/tilting head: RENISHAW PH10M Giodpfxszcpkve Ahvsu Interchangeable magazine with 3x FCR25. A total of 9 touch probes with diameters ranging from 5mm to 0.3mm. Granite measuring table Annual maintenance and calibration performed by an accredited company/CZ

Condition: ready for operation (used), Year of construction: 2020, total height: 2,220 mm, overall weight: 14,000 kg, controller manufacturer: BOSCH, controller model: MTX, number of axes: 6, This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic Motor Power: 11 kW • Axes Drive Type (C1 and C2): Direct drive • Hydraulic Punching Force: 30 tons • Portable CNC Control Panel • Work Chute: Automatic system to take out cut parts • Mobile Storage Box for Cut Parts • Waste Box • Light Barriers Machine Benefits Technical Machine Benefits • Ce conformity • Maximum sheet thickness: 6. 4 mm • Maximum punching rate: 1 mm nibbling: 900 hits/min 25 mm nibbling: 580 hits/min • Maximum punching diameter (for 6. 4 mm thickness): 25 mm • Number of clamps: 3 • Tables: movable in y axis • Table height: 980 mm • Movable table: 1300 × 5200 mm with ball transfers Gsdpfx Ajzbiybshvjiu Extra Information The machine is in excellent condition, has only a few hours of operation, and is like new. Control Unit Control: Bosch MTX Operating System: Windows Hard Disk: 150 GB CPU: 2 GHz RAM: 2 GB Data Transfer: USB stick memory Display: 12" TFT LCD color screen Movement Axes: 6 (X, Y, Z, C1, C2, T) Axis Speeds: X: 100 m/min Y: 80 m/min X + Y combined: 128 m/min C1 / C2 rotation: 300 rot/min T axis: 20 rot/min Repositioning: Available Positioning Accuracy: ±0.1 mm Repeatability: 0.04 mm CAM Nesting Software: Lantek Turret Tool Rotation: Indexable Multitools Support: Available (3 or 8 tools) Total Number of Tool Stations: 20 Indexable Tool Holders: Standard 4 (option up to 10) Tool Change Time (multitools): 0.3 s Maximum Tool Change Time (turret): 3 s Dimensions Machine Depth 6370 mm

Condition: like new (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 800 mm, workpiece weight (max.): 1,600 kg, total height: 3,073 mm, total width: 2,652 mm, total length: 1,624 mm, overall weight: 2,570 kg, Equipment: documentation/manual, Our company offer for sale CMM COORD3. This rarely used machine was used by our company as a DEMO machine for technician education or at trade shows. The machine has a granite worktop. The individual axes are mounted on air bearings. Our company is able provide all necessary steps for moving and commissioning. COORD3 Universal 10.15.08 Measure dimension: X 1 000 mm; Y 1 500 mm; Z 800 mm Measure accuracy: MPEe = 2,0 + L/333 (L in mm) MPEP= 2,1 µm. Machine dimension: length 1 624 mm width 2 652 mm high 3 073 mm Measuring plate dimension: 1 000 x 2 330 mm Probing components: probing head RENISHAW PH10M measuring probe RENISHAW TP20 CMM controller: Metrologic ME5010 CMM keyboard: Metrologic ME471 PC with minimal configuration: Windows 10, 64 bit, CPU - i7, RAM - 8 GB, HDD - 250 GB, graphic card NVIDIA FX QUATRO supporting Open GL 2.1, ports - USB, LAN (RJ45), VGA a HDMI. Display 1920 x 1200 DPI, VGA, HDMI. Measuring software: Gsdpfx Ahswrm Tuevsiu Metrolog X4 CNC

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: Kühlmitteleinrichtung, Coolant system for cooling lubricant RUEZ coolant tank with integrated sludge scraper, chip conveyor - Coolant cleaning system for cooling lubricant - Including two-part RUEZ lamella separator. - Including RUEZ safety sump in accordance with WHG with 100% collection space - Including clean tank & RUEZ magnetic roller filter - Year of construction 2022, unused & as good as new - RAL 7035 light gray - Superstructure for chip cart - No belt filter, sediment system - Available immediately - Price VB Description Coolant system: - Capacity approx. 34,720l - Filling volume approx. 32,710l - Useful volume approx. 22,020l + approx. 6,017l (clean tank) - L/W/H approx. 7,341mm/2,800mm/2,000mm - Tank walls 4mm/S235JRG2 - Walk-on, split tank cover - Tank supports approx. 100mm - Level indicator OWE 2/C as leakage protection - Inlet/distributor with strainer basket - 2 supply pumps - Type: NB100-25/4-15kW - 2000 l/min at 2.1 bar - Pipe - DN150/125 - Return line - DN 100 - PN 16 - RUEZ float switch RB 200 - 3 / 1900 - Level indicator FTL31-CA4M2AAWBJ as overfill protection (clean tank) - RUEZ control unit - Siemens TIA - SPS: SIMATIC S7-1200, CPU 1215C - Visualization: KTP700 control panel - Indicator light red-yellow-green Gsdpfstwpttex Ahveiu

Condition: used, Year of construction: 2006, Technical details: workpiece weight: 1,1 t Gijdpfx Ahovzq Hreveu control: RobAssist über makro-Technik / VME-Bus-CPU Rotary-table: Ø 800 mm rotary table tiltable: 370° Grad table - tiltable: 115° Grad total power requirement: 35 kVA Total weight, approx.: 4000 kg dimensions L x W x H: Roboter: ca. 2,5 x 4,5 x 3,8 m dimensions electric cabinet: ca. 600 x 800 x x2200 mm dimensions L x W x H: Absaufanlage: ca. 0,7 x 0,8 x 2,7 m dimensions L x W x H: Drehmodul: ca. 1,4 x 1,4 x 1,1 m The system is currently in the technical department. Welding robot system consists of: -Gantry with robot: Reis Robotics, RVL20-16.3 kVA, stroke radius max. approx. 1600 mm, speeds = axis 1: 3 m/sec, axis 2: 185°/sec. Axis 3: 150° / sec., axis 4: 450° / sec., axis 5: 450° / sec., axis 6: 500° / sec, -2x columns: Column spacing 3300 mm, columns on base plate 900x900mm; columns Ø 350 mm -Turntable/tilt and turn module: Model RIS, type RDK11 Torque max. tilting axis = 4,200 Nm and turning axis 2,200 Nm Speed of tilting axis = 19° / sec. and turning axis 45° / sec. -Welding unit: Fronius, type TPS 2700; welding current range: MIG/MAG 3-270 A and electrode 10-270 A as well as TIG = 3-270 A; protection class IP 23 -Welding fume extraction: Teka, type DUST Buster DB-302 R, air volume flow max. 300m³/h, filter class Kategori C, filter area 2.2 m² -Cooling unit: Type FK 4000 R, power 2 kW, protection class IP 23, pressure 4 bar Equipment: -safety light barrier with transmitter and receiver Hand-held programming device *

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Gsdpjy Dtpmsfx Ahvjiu Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Gsdpfx Ahexwaz Hsvsiu

Condition: used, Year of construction: 2011, functionality: fully functional, overall dimensions 1128x798x1657 mm; hopper 90 ltr; power supply 400 V, 50 Hz; power 5.0 kW; stuffing capacity up to 2700 kg/h; stuffing pressure 40 bar; twisting device; Gsdpey Txlxsfx Ahveiu casing holding device; weight 450 kg. There is an additional new controller Standalone CPU, CP321/X.

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Gijdpfoy Nd T Hox Ahveu Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending • Programmable blank holder Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Gsdpfjh Dwqhsx Ahvsiu Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Friction welding machine from MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315 - Rexroth hydraulics - German user interface Godpfx Ajv Uzf Eshvsiu - CE Upon request, this machine can also be converted for many other welding tasks.

Condition: used, functionality: fully functional, The 16-channel FT2M control system from MTS was in use until recently and is now for sale. All 16 system cables for 16 control channels—force, displacement, and servo valve—are included. PC and system software are included. Equipment: 16 pcs: Dual Valve Driver Board 497.26 Gsdpfx Ahswv Uqieveiu 16 pcs: AC Amplifier Board AC Cond 497.13B 16 pcs: Dual DC Amplifier Board 497.22C 4 pcs: 497.01 Analog Chassis (19" rack) 4 pcs: Power supply +-15V/+5V 4 pcs: Station Control Card 497.34 4 pcs: RS232 Communication Card 497.36 1 pc: Hydraulic Control Panel 497.05 for 4 stations 1 pc: Global Resources III Card 498.71B 4 pcs: ADDA Card 498.65 2 pcs: PROC CPU 498.96-3

Condition: like new (used), Year of construction: 2021, machine/vehicle number: KA 8, 2/33/008/21, VO-DA, 2/06/009/21, For sale: one automatic carton erector with volume optimizer. The machines are still in their original packaging and have never been used. Carton Erector: Machine specifications: Machine no.: KA 8, 2/33/008/21 Year of manufacture: 2021 Dimensions (LxWxH): 3,500 x 2,380 x 2,450 mm Weight: 2,100 kg Electrical connection: 400 V, 50 Hz, 12 kW Output: 13 cartons/minute Carton processing: Carton sizes (LxWxH): 385 x 285 x 200 up to 590 x 385 x 350 mm Tolerance for carton sizes: +/- 5 mm Carton quality: single-wall B or C flute Suitable for blanks according to FEFCO 0200 Machine components: Frame Carton magazine (LxWxH): 1,700 x 800 x 1,000 mm, weight 80 kg Carton conveyor Folding unit Gluing station Glue applicator Automatic hot melt supply: 120-litre drum Control and technology: PLC: Siemens S7, ET 200 SP with CPU Operator panel: Simatic HMI TP 700 Comfort on the control cabinet Profinet coupler and Ewon router technology for remote maintenance Gjdjyxmdgjpfx Ahveiu Volume Optimizer: Machine specifications: Machine no.: VO-DA, 2 Year of manufacture: 2021 Dimensions (LxWxH): 5,600 x 2,200 x 2,960 mm Weight: 2,900 kg Electrical connection: 400 V, 50 Hz, 32.5 kW Output: 11-12 cartons/minute Carton processing: Carton sizes (LxWxH): 400 × 300 × 200/300 mm Tolerance for carton sizes: +/- 15 mm Processing of carton blanks according to FEFCO 0200 Use of lid blanks according to FEFCO 0458, glued onto the carton Machine components: Magazine (LxWxH): 1,700 x 800 x 1,000 mm, weight 200 kg Indexing/transfer station, minimizing station, folding station, and lid application Frame and safety guarding (LxWxH): 1,400 x 1,300 x 1,200 mm, weight 150 kg Automatic hot melt supply: 120-litre drum Control and technology: PLC: Siemens S7, ET 200 SP with CPU Operator panel: Simatic HMI TP 700 Comfort on the control cabinet Profinet coupler and Ewon router technology for remote maintenance

Year of construction: 2010, condition: excellent (used), Complete euroblock cheese production line designed for efficient processing of milk into Euroblock cheeses. The system can be easily expanded to produce various sizes of round cheeses with a weight of approximately 4–5 kg. It can process 6.000 liters of milk per batch, up to 4 batches a day. The line exists out of: Milk reception (by a mobile centrifugal pump) Milk receiving pump from the truck or truck with pump unloaded itself. 1. 2 pieces raw milk storage tanks (refrigerated), 6.000 liter per tank. • Manufacturer: Mueller • Year of make: 2012 • Horizontal, insulated and cooled milk storage tank, cip cleanable. • Cooling compressor Freon 2. Milk reception valves • Valve manifold to automatically send the milk to the selected tank, to pump the milk from the tank into the pasteurizer and to CIP (cleanable). • Set of 4-way butterfly valves with controls. • Manufacturer: GEA – Tuchenhagen 3. Complete pasteurize installation • Manufacturer: C van ’t Riet • Year of make: 1996 • Capacity: 6.000 liter • Complete on a skid. • With Balance tank, pumps, heat exchanger, holding tube, hot water control, valve interconnecting piping. Control system with temperature recorder. • In 4-65/75°C Holding tube -> 25/35°C cheese-making temperature. 4. Buffer tank for pasteurized milk 6.500 liter. • Manufacturer: Zero • Top insulated • Function: To store/ buffer warm milk so that the pasteurizer can continue running and two batches can be processed more quickly directly after each other. 5. Cheese vat • Manufacturer: Damrow (Gea) Double 'O' • Volume: 6.000 liter per batch • Closed cheesevat with whey extraction sieve from above. • Self-priming pump for cip and whey. • Placed on a stainless-steel frame for a free fall to the drainage tank. • Separate control system. • Valve manifold (Tuchenhagen) for importing milk from a pasteurizer or buffer tank, valved design so buffertank can independently be cleanded. 6. Automatic prepressing and cutting vat • Manufacturer: C van ’t Riet • Year of make: 2010 • Including CIP-pump • Capacity of the curd mixture 6.000-liter vat (for curd processing) • Transfer from curd vat: by gravity • Number of cheeses from 6000 liter: 42 cheeses of 15 kg (approximately) 7. Pressing system • Tunnel press, 42 positions for euroblock. Gsdpfx Ajyzxdkjhvsiu • Pall lane system by pneumatic cylinders to convey the moulds automatic in and out of the press. With controls and press program. 8. Moulds • Micro-perforated LAUDE moulds, 15 kg euroblock. • Molds have been partially replaced and are only a few years old. 9. Mould washing • 2 pieces of mould washing bassins 10. Brine • 8 pieces brine cages/racks (without brine boxes, those are cast in concrete) • 2 pieces brine cooling compressor and tanks (on top) 11. Whey tank • Horizontal whey tank (+/- 7.000-liter capacity) 12. CIP-system (fully automatic Siemens S7) • Consisting one tank with three compartments • Heat exchanger • Automatic valves • CIP pressure pump • The entire pre-factory has a fully automatic CIP and automatic control CPU Siemens S7 (support from the original supplier is possible/delivered by Gea)

Condition: used, overall weight: 600 kg, Equipment: type plate available, Modular assembly and testing cell with X-Y-Z handling using the Schneider Lexium 32 axis module - Schneider handling travel distances: X = 500 mm, Y = 420 mm, Z = 175 mm - Integrated Siemens CPU 315-2DP/PN and HMI MP177/3 - Functional basic software, flexibly expandable - Operable via Sick safety light curtain C4000 eco or can be used independently as an automatic station - PLC program and circuit diagram available - LXM motion controller included for expansion functions such as path travel, etc. System dimensions: 1300 mm wide Giodpjy A Ri Isfx Ahveu 1600 mm deep 2200 mm high System weight: approx. 600 kg If you have any questions, please feel free to contact us. We will get in touch with you.

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Gedpexhgfgsfx Ahvsiu Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .