Used Daub Bread Roll Press for sale (19,666)

Condition: new, Year of construction: 2022, color: grey, overall weight: 15,000 kg, maximum load weight: 13,230 kg, empty load weight: 1,770 kg, loading space volume: 10 m³, loading space width: 2,380 mm, loading space length: 5,500 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: en route/in transit, steel body, doors. Bdodpevhizhjfx Afwog Body: Roll-off container with double-wing door, approx. 10m³, ARCHIVE IMAGES. Roll-off container according to DIN 30722-1, external rollers greaseable, floor 5mm, walls made of 3mm steel, spar spacing 750 mm, double-wing door with reinforcement and Dutch door latch, all-round lashing and netting hooks, galvanized climbing irons according to UVV on the front end, price per unit, with 8 lashing points per side and 2 lashing points on the front wall. Painted in anthracite gray RAL 7016! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. Bjdpfx Aeff Huwofwodg With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg Bdodpsh D If Hefx Afwog

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm Bdedpfx Afeiidm Newsg The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Bsdpfxsb Eln De Afwsdg Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Bedpfx Aedwh E Asfwodg Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading Bdjdpfxjdx R Tfe Afwsg - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Bdodpfx Aev Akmzefweg Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: used, Year of construction: 2015, machine/vehicle number: 663462, functionality: fully functional, Specification: Min./max. air pressure: 0.4/0.6 MPa; 4/6 bar Max. pressing force: 50 kN Total stroke: 150 mm Power stroke: 7 mm Bedpfswtgpxjx Afwjdg Type: STE341-7210 SF device Power: 0.5 kW Power supply: 230/3/50-60 V/A/Hz Control voltage: 24 VDC Protection rating: IP54 Pre-fuse: 16 A The TOX Pressotechnik hydropneumatic press EEB 008.061.A.001 is a versatile and powerful solution for precise forming and assembly operations in industrial manufacturing. It combines the advantages of hydraulics and pneumatics to ensure consistent force transmission and high accuracy. The robust design ensures long service life and reliable operation, while the user-friendly control system enables easy handling.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the Konica Minolta Bizhub PRESS 2250P. Item for sale: 1 x Konica Minolta Bizhub PRESS 2250P with the following equipment: Includes 2x paper decks Includes LS-505 stacker Not the right equipment for you? We can easily configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 34,784,268 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Bdodpfx Afoyamw Uowsg Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW Bdedpfexuhzcox Afweg - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,250 mm, brakes: constant throttle, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Croatia, Kz. Haus, 1 air seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, automatic transmission, differential lock, fog lights, leaf-air suspension, air and light connections for trailer hitch, aluminum tank, 2-axle front-wheel steering, hydraulic transverse locking, green environmental badge. Wheelbase: 4250 mm, Body: 26t Hyva T26-55-S roll-off system for containers from 4.3m to 6.6m, frame height approx. 1160mm! Frame length approx. 6200mm! Location: Trgo-Auto d.o.o. Matoseva 86 0 Solin Hrvatska / Croatia / Kroatien Bdodpjxb Ek Isfx Afweg ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Bsdew Sgnkjpfx Afwedg Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: refurbished (used), DKV III continuous press with braking unit Completely overhauled Optional with original hydraulic motors or with servo motors Options: - Chain threading - Co-rotating cut-off saw Function: For pressing the dovetail joint without stopping (in a continuous process). The upper and lower plate chains generate the feed force. Downstream braking plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite a relatively slow feed rate - Absolutely no vertical displacement of the dovetail joints Technology: Heavy-duty plate chain 2", pneumatically adjustable Braking elements are floating Press force measurement via contact manometer Height adjustment electrically Maximum press force adjustable and dependent on feed rate and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed rate adjustable 10-70 m/min Drive power Adjustment of infeed unit 1 kW Adjustment of brake 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Ratio thickness - width 6 : 10 Wood cross-section with 15/16.5 mm tenon max. 90 cm² Bsdpjv T Aqyjfx Afwodg

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. Bdedpfxewqr R As Afweg The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Bedpfey Dfclex Afwsdg Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,690 kg, empty load weight: 2,310 kg, loading space volume: 20 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 1,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Bsdpezbm Ngsfx Afwodg Body: Roll-off container with double-wing door, approx. 20m³, ARCHIVE IMAGES! Roll-off container according to DIN 30722-1, external rollers greaseable, floor 5mm, walls made of 3mm steel, spar spacing 750 mm, double-wing door with reinforcement and Dutch door latch, all-round tarpaulin and net hooks, galvanized ladder rungs according to UVV on the front, RAL 7016! with 2 lashing eyes on the front wall and 4 lashing eyes per side. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,050 kg, empty load weight: 2,950 kg, loading space volume: 36 m³, loading space width: 2,300 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors. Bdsdpfx Afozbm Nmowog Superstructure: Roll-off container with double-wing door, approx. 36 m³, with lashing eyes. ARCHIVE IMAGES. Standard roll-off container, external rollers can be lubricated and replaced, floor 5mm, walls made of 3mm steel, stringers 750, double-wing doors with reinforcement and Dutch door latch, circumferential tarpaulin and net hooks, galvanized ladder rungs according to UVV regulations on the front, warning markings, RAL 7016 anthracite gray, with 2 lashing eyes on the front wall and 4 lashing eyes on each side! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, Year of construction: 2019, machine/vehicle number: 269913, functionality: fully functional, power: 0.5 kW (0.68 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, total length: 1,140 mm, total width: 1,380 mm, total height: 1,440 mm, overall weight: 230 kg, Equipment: CE marking, PONY BP-B Professional Garment Press (2019) Industrial Steam-Pneumatic Press for Trousers, Waistbands & Structured Garments The PONY BP-B is a professional industrial garment pressing machine manufactured by PONY S.p.A., Italy in 2019. Designed for continuous production environments, this steam-pneumatic press delivers high-quality finishing for trousers, waistbands, jackets, coats, and other structured garments. The machine combines steam, compressed air, and an integrated vacuum system to produce consistent, wrinkle-free finishing results with high productivity. The machine has been used in professional garment manufacturing and remained fully operational until the factory shutdown. Technical Specifications • Manufacturer: PONY S.p.A. • Model: BP-B • Year: 2019 • Serial Number: 269913 • Country of Manufacture: Italy • Power Supply: 230 V, Single Phase, 50 Hz • Power Consumption: 0.5 kW • Working Steam Pressure: Up to 5 bar • Pneumatic Operation: External compressed air required • Vacuum System: Integrated Lowara vacuum unit • Weight: Approximately 230 kg Bjdpfjzkhy Rex Afwsdg Key Features • Professional steam-pneumatic garment press • Integrated vacuum extraction system • Steam-heated pressing head and buck • Designed for trouser tops, waistbands, jackets, and structured garments • Adjustable pneumatic pressing pressure • Foot pedal operation • Dual safety hand controls • Emergency stop button • Heavy-duty industrial construction • Suitable for continuous production environments • Includes • PONY BP-B garment press • Integrated Lowara vacuum system • Steam and pneumatic connections • Foot pedal controls • Industrial cabinet base • Safety guards • Electronic controls Applications • Trouser finishing • Waistband pressing • Jacket finishing • Coat finishing • Workwear production • Garment manufacturing • Commercial laundries • Textile finishing departments Condition • Fully functional • Previously used in professional garment production • Serviced on 27.02.2026 • Video recorded in operation on 05.03.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, compressed air, and electrical connections, dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's industrial utility connections. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters Bdjdpfx Afozn H Rvowsg - Drive: 400 V / 17 kW - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg

Condition: used, color: green, loading space width: 2,400 mm, loading space length: 6,500 mm, loading space height: 1 mm, mileage: 1,001 km, first registration: 06/2015, gearing type: other, driver cabin: other, Vehicle location: Croatia Body: Roll-off platform with front wall, lower roll-off platform; the year of manufacture was estimated as no identification plate is available! Location: Bjdpszk Rk Ejfx Afwedg Trgo-Auto d.o.o. Matoseva 86 0 Solin Hrvatska / Croatia / Croatia ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2026, color: green, overall weight: 15,000 kg, maximum load weight: 12,990 kg, empty load weight: 2,010 kg, loading space volume: 12 m³, loading space width: 2,380 mm, loading space length: 6,500 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors. Superstructure: Several roll-off containers with double-leaf doors, approximately 12 m³, available. Roll-off containers according to DIN 30722-1, external rollers with grease fittings, 5 mm floor, 3 mm steel walls, spar spacing 750 mm, double-leaf doors with reinforcement and Dutch door latch, all-around tarpaulin and net hooks, galvanized ladder rungs according to UVV on the front end, price per unit, with 8 lashing eyes on each side and 2 lashing eyes on the front wall. Painted in foliage green RAL 6002! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Bodpfx Aeyrhxwofwedg

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, number of digital displays: 1, Equipment: cone bending device, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1050 x 1.8 mm – Bending capacity 1050 x 1.5 mm – Roll diameter 70 mm – Electrically adjustable rear roll – Digital display – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor Bjdeyp E Siopfx Afwedg – Foot control – Emergency stop – Documentation – 400V

Condition: used, mileage: 202,092 km, power: 290 kW (394.29 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, color: orange, emission class: euro6, total length: 7,700 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, soot filter, MB 2640 Multilift Roll-off Truck 6x4 Suspension: Leaf-air Wheelbase: 3.60 m Payload: 14,565 kg HIAB Hooklift Type: XR21S46 - W - IT2B- Year: 2016 4.80 m to the center of the rollers Special Equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Step with handrail on the roof, Exhaust to the lower right, Brake connection standard and DuoMatic, Air horn, Suspension: Front springs 8.0 t, 3 leaves, Transmission: 12-speed - Type: G 230-12, Rear lights, construction site version, Info display 10.4 cm with additional display, Interior filter for construction vehicles, Fuel tank: 290 L steel, left, Air intake from the front, Parameterizable special module, Rotating beacon left/right, Reversing warning audible (warning signal outside), Bedpozf Sg Dsfx Afwedg Rear cross member reinforced, Protective plate under main tank, Seats in the cab: Driver's seat, sprung comfort seat, Sun visor outside, Sunshade for side window, driver's door, Additional stabilizer, Rear axle / trailing axle, Storage flap outside left, 24V socket in the passenger footwell, additional, Stone chip protection grille Additional Equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2-line, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Battery 170 Ah, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Cab: Width 2.30 m, Cab: Cab entry movable, Cab: Tilting device hydraulic, Cab: M ClassicSpace, Cab: steel sprung, standard, Cab floor with engine tunnel 170 mm, Suspension: Leaf / air, Window lifters electric, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Lift roof manual (steel), Rear axle bevel gear 233, Interior filter: Pollen filter, Steering power pump unregulated, Air compressor 2-cylinder, Air dryer heated, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine brake, Engine compartment encapsulation, Auxiliary drive MB 131-2c, Frame lowering without air spring residual pressure control, Ramp mirrors, Waste heat recovery, Rear window, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger multi-adjustable seat, Stabilizer front axle, Socket cab 24V, Tachograph / EG control device, Rear underrun protection fixed, Front axle straight, Water pump regulated, Permissible total weight 26.0 t, Oil cooler transmission We will also be happy to support you in the area of financing/leasing with our partners. All information without guarantee. Subject to change and prior sale.

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: 8071, functionality: fully functional, pressing force: 100 t, stroke length: 400 mm, overall weight: 21,000 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,000 mm, bending force (max.): 100 t, control type: CNC control, degree of automation: automatic, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, finger protection, Used Warcom Dinamica 3000 x 100-ton press brake, year 2008, an industrial machine designed for complex and large-format bending operations thanks to its advanced configuration with 8 controlled rear axes (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. With a bending length of 3000 mm and a bending force of 100 tons, this machine is ideal for medium and high-volume applications, with the ability to handle complex geometries and structural components. Key features: Bending force: 100 tons Bending length: 3000 mm 8 controlled rear axes: Y1, Y2, Z1, Z2, X1, X2, R, X → superior flexibility for complex bending operations Model: Opera Robust and reliable construction Year of manufacture: 2004 A highly versatile press brake, suitable for metalworking workshops and manufacturing companies that require power, precision, and multi-axis control in a single solution. Bsdpszqtb Tjfx Afwsdg