Used Heraeus Oven For Surfaces for sale (10,888)

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. Nodpjuxmt Tefx Abzecw In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: used, Thermo Multifuge 1S-R cooled centrifuge Centrifuge centrifugal machine Voltage: 230V, 50/60Hz Current: 9,2A Power: 1520W Temperature range: -9 °C to + 40 °C Speed: 15000 rpm depending on rotor Bucket 4x type: Heraeus 75002001 L Maximum load: 540 g Maximum speed: 4700 rpm Inserts 4x red: 12 holes of approx. 16 x 60 mm External dimensions (W) x (D) x (H): 68 x 65 x 36 cm For technical data, see type plate. Ncsdpfxjt Eurij Abzjw You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Nedpfxogqr A Dj Abzocw

Condition: excellent (used), The Thermo Scientific Heraeus Biofuge Primo R centrifuge enables high-throughput and low-throughput processing with optional rotors and accessories and a maximum speed of up to 15,000 rpm. This compact, high-performance refrigerated centrifuge provides efficient and flexible sample processing. The Primo R features automatic rotor recognition and unbalance detection with uniform temperature control. The Primo R is ideal for small medical laboratories, biochemical and molecular biology research, and routine analysis in industrial laboratories. Typical applications include sedimentation of cells (algae, yeast, bacteria, etc.), sedimentation of cell organelles and cell fragments, preparation of DNA samples and protein precipitates, blood and urine analysis, and centrifugation of standard test series in microliter tubes. This refrigerated centrifuge is equipped with a fixed angle and tiltable rotor. Technical specifications: Voltage: 220-240 V Current: 2.9 A Power: 490 W Maximum centrifuge speed: 15,000 rpm (adjustable in increments of 10) Minimum centrifuge speed: 300 rpm Maximum RFC Weight: 21855 g Temperature range: -9...40°C Noise level at maximum speed: < 60 dB Rotor recognition: automatic Unbalance recognition: electronic Safety features: lid lock and interlock Rotor specification 1: Number: 7591 Type: swinging bucket rotor Maximum speed: 4000 rpm Maximum RCF: 2585 g Maximum capacity: 4 x 100 mL Nedpfxst Eva Is Abzjcw

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Ncodpsuq Sb Sofx Abzsw

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars Nodstvdcyspfx Abzjcw 🔹 cables The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Nedpfxswfq T Se Abzjcw Discharge of scrap from under the machine directly to the container.

Condition: good (used), Conveyor belt for scraps from guillotine M-Fordersysteme Production Germany Year of manufacture 2015. Working width 46 cm, conveyor length approx. 250 cm. Discharge of trimmings from under the machine directly to the container. Nodpfxjwxtdgo Abzjcw Material pressing roller, upper cover preventing spillage of the excavated material.

Condition: used, Separator element for pallet racking system. Suitable for frames with a depth of 1000-1050-1100 mm. Arm length: 500 mm For a 2700 mm bay with 6 arms, 24 pieces – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms, 46 pieces – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms, 4 pieces – 51 EUR + VAT/piece If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available include: Frame, corner, and impact protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code, location, and the desired quantity of items. Further service offerings: Planning, shelving assembly/disassembly, purchase/sale Ncjdpfx Abjk Tzzljzsw Subject to changes and errors in technical data, specifications, and prices, as well as prior sale!

Condition: like new (used), The Heraeus Primo R Refrigerated Centrifuge is the perfect centrifuge solution when performing routine analysis in different types of labs. This unit brings you flexibility, efficiency and functionality in a compact, high-performance system all designed to accelerate your sample processes. The Primo R features an imbalance recognition system for improper loading, an EASYcontrol® II control panel for user comfort and user-friendly technology with automatic rotor recognition system. To complete this instrument, we offer a complete selection of rotors and adapters to meet the needs of any lab. Product Features: Touch keypad microprocessor control (EASYcontrol II) Digital display shows all run parameters Variable speed/RCF/time control QUICK RUN key for short spins Choice of 2 acceleration and 9 braking curves for sensitive samples Memory retains current settings With optional rotor/adapter combinations, accept tubes from 0.2 to 100mL Specifications: Nsdpfx Absii Ahxszjcw Capacity: 400mL (4 x 100mL) Max RCF: 21,885 x g Max Speed: 15,000 rpm; adjustable in increments of 10 Max Noise Level:

Condition: excellent (used), Sound insulating cabins. For Bruderer high speed automatic presses. On stock available cabins for machines: BSTA 25 BSTA 41 BSTA 50 BSTA 60 Ncodpoiw Icbjfx Abzjw BSTA 80 Cabins sold refurbished, carefully disassembled and packed for transport. Painted in white and anthracite (or colors requested by customer). Cabin is equipped with all needed holes for easy use of a Bruderer press. Front and rear doors with inspection glass. Air ventilator for climate control on top cover. For more information don't hesitate to contact us. We have on stock Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, also Mabu and Schaal automatic punching machines.

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Nodpfxsxiv Uge Abzscw Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Ncjdpfexlfwpex Abzow Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Nedpfxjxliguj Abzocw Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, functionality: fully functional, The ASM 6-30 is a high-speed tooth setter for band saw blades, making it perfect for companies that use different volumes of bandsaw / sawmill blades per day. The machine is very user-friendly and easy to set up, making it the ideal solution for a wide variety of customers with different experiences in the industry. Voltage - 220V Frequency - 50Hz Power - 220V Secondary voltage - 24V Blade width - 15mm-60mm Tooth pitch - 6-30mm Accuracy - +- 0.04mm Njdexivgcepfx Abzscw Blade thickness - 1.2mm Possible types of tooth set - left, right,straight/right,left,straight The machine is very user-friendly and easy toset up, making it the ideal solution for a wide variety of customers withdifferent experiences in the industry. Achieving precise tooth setting isessential for straight cutting and extended blade life, and our advancedclamping system delivers an impressive accuracy of 0.04mm. Capable of setting80-120 teeth per minute, the ASM 6-30 enhances your company's efficiency andensures a smooth workflow.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Ncedpfx Abjq Nf U Eezow Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: Ncsdpfx Abeq Nw Uqszow 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Njdpfx Asq Ngafjbzjcw Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc Ncodpfevn D I Nox Abzsw +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 Nodpoq Igyvefx Abzscw 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 432.07.383.14, functionality: fully functional, planing width: 410 mm, number of blades: 4, overall weight: 510 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Planing width: 410 mm Planer cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm MACHINE DETAILS Motor power: 5.5 kW Ncodpfozkt Itox Abzew Motor voltage: 400 V Chip removal: 5 mm Dust extraction connection: 120 mm Weight: 510 kg EQUIPMENT Cutterhead with 410 mm planing width Infeed table with table length of 1,080 mm Fence with ruler 1,300 x 170 mm Fence guard, EURO standard 4-knife Felder system cutterhead

Condition: used, Antares Vision AV6630.0 PSA Mini Linear for Case Unit was removed from the stores of "blue chip" pharma company in Ireland. Very good condition Nsdpfx Aeznw Tnjbzocw

Condition: used, REF: MM6452 3 x Baker Perkins travelling ovens with 15m long x 1580mm wide belt. NOTES: One of the ovens has a belt missing 12 x sections/lines. Ncsdpfezccfgsx Abzjw All equipment to be removed from the factory by the Buyer.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, fuel type: gas, Equipment: CE marking, GAZ HEIN ECOSTONE LR1 86H bakery rotary oven, 2024 model Nodpfxjzpflus Abzecw In very good condition and has only been in operation for a few months.

Condition: used, functionality: fully functional, input voltage: 400 V, overall weight: 2,500 kg, Equipment: CE marking, Zuchelli gas-fired rotary oven for bakeries Ncodozpfhvjpfx Abzow Double trolley, 60x80 or a single trolley, 80x120 4 ovens available, with 20 trolleys, 80x120