Used Homag Drillteq V-310 for sale (37,405)

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. Lrsdpfx Aeyx N Hqjgret This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. 5-speed manual transmission. 127 km/h. Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Unladen weight: 2370 kg. Permissible total weight: 3200 kg. Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Condition: good (used), Year of construction: 1998, functionality: fully functional, Equipment: CE marking, Processing line for solid wood and MDF boards, including rotary tables and 2 Weeke 500 drilling machines, with stacking units. The line has been dismantled due to the company ceasing its solid wood operations. The line can be divided, and the machines can be purchased separately. Lrodpfx Agjzb D Nkoret

Condition: used, mileage: 563,000 km, power: 228 kW (309.99 HP), first registration: 12/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro3, Year of construction: 2005, Equipment: ABS, soot filter, Manufacturer Scania Model P310 4x2 Hvidtved Larsen Flexline 207 Year 2005 Condition Good Serial Number YS2P4X20002012270 Ref. nr. 698111 Reg. date: 14-12-2005 Last seen: Hk: 310 Km: 563000 Gearbox: Opticruise Eurotype: 3 + particulate filter Diesel tank: 1 Tank liter: 350 Rear view camera: ? Cabin type: CP16 Radio: ? Disc brake: ? ABS: ? Ledpsy Ek Uvefx Agrsrt Engine brake: ? Tire Size: 315/80R22,5 Cover% left 80 - 80% Front suspension: Air Suspension rear: Air Wheelbase: 4500 Toolbox: ? Hydraulic system: ? Total weight: 18000 kg. Net weight: 12550 kg. Load capacity 5450 kg. Manufacturer: Hvidtved Larsen Tank capacity: 7000 l High pressure pump: Uraca KD 716G High pressure capacity: 330 l/min 170 bar. High pressure pump hours: 1471 Vacuum pump: Wittig RFW200 Vacuum capacity: 20.600 l/min Vacuum pump timer: 3060 Remote control: ? Water heater: ?

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW Lodsyyvttspfx Agrort No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper Lrjdoyxgxwepfx Agrjt type: LW560 serial number: 10172/4184 year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: Ledpfszg Epuox Agrjrt SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-43-0070, functionality: fully functional, operating hours: 2,731 h, power: 10 kW (13.60 HP), input voltage: 300 V, input current: 32 A, year of last overhaul: 2026, Equipment: documentation/manual, 3-AXIS (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable machining head Vertical table (workpiece) Cec Ard Uoyywcvspnjrd Control system: POWERCONTROL + POWERTOUCH Software: woodWOP Safety cabin for the machining head No. 1 locking system for workpiece clamps in the working area Workpiece drive with transport chain Ljdpezi Ul Refx Agrert Minimum workpiece dimensions (X-Y-Z) mm 200 x 70 x 12 Maximum workpiece dimensions (X-Y-Z) mm 3050 x 850 x 60 Total connected power (kW): approx. 11.5 WORKING GROUPS: No. 1 drilling unit (Power (kW) 2.3) with vertical spindles: - No. 13 independent vertical drilling spindles (V13 High Speed) - No. 6 independent horizontal drilling spindles (4 in X + 2 in Y) No. 1 grooving saw unit (for operations in the X-axis) diameter (mm) 100 No. 1 vertical main spindle (milling unit) HKS63 (Power kW 5) Automatic tool changing system - magazine positions (No. 4 tool positions)

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 Lrsdpfx Ageyv Ev Asret No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: reconditioned (used), functionality: fully functional, Flat- or glue joint scraping unit Used unit, not reconditioned, without warranty - For removing of glue residuals or leavings from the panel surface in the area of the glue joint. Specification: - consisting of one top and one bottom unit, individually adjustable. - top unit synchronized with top pressure in vertical direction Lrodpfx Agjtywukjrot - version with 3 small tracer rollers, individually adjustable, for smooth passage at front and rear edge of panel. IMPORTANT ANNOTATION: version with pneumatic cylinders for lateral cut-in/out controlled by selection of the individual unit in the main control is currently not available. But it is possible to retrofit this feature. Please ask for our quote. Installation and set-up of the unit at your machine is also possible.

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) Lrjdpfxegwbbqo Agret N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" Lrsdpfx Agsdt Rgverst VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: refurbished (used), Numerical Control Type Power Control Professional Software woodWOP / TopDrill BST No. 2 Through-feed motorized conveyoring belts (4 x Kw ?) No. 2 Horizontal units/supports (with Digital quota/axes display) Lrodpedz Uk Tefx Agrst No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the top vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 36

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 3.0/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm Lrsdpfjb R Ua Ejx Agret -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1100/600/H1330 mm -Weight: 340 kg

Condition: good (used), Aggregate carrier, clamping plate, traversing table, for modular aggregate system, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG aggregate carrier for milling units -with heavy leadership -movable laterally -with counter Ledpfx Agsb R Ua Hersrt -Table height: 285 mm -Table surface: 1210 x 295 mm -Table thickness: 18 mm -Dimensions: 480/1210/H290 mm -Weight: 172 kg

Condition: good (used), Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang Lsdeb Sc Stspfx Agrsrt -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x Perske motors -Engine Type: Lodjb Sgzaepfx Agrjrt -Power: 0.75 kW -Voltage: Volts -Frequency: 300 Hz -Speed: 8,600 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 940/620/H350 mm -Weight: 54 kg

Condition: good (used), Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable Lsdpfjb Uhn Usx Agrjrt -with counter -Table height: 278 mm -Table surface: 1600 x 295 mm -Table thickness: 18 mm -Price: per piece -Number: 2x available -Dimensions: 1600/295/H278 mm -Weight: 170 kg

Condition: good (used), Unit carrier, clamping plate, travel table, for modular units, format processing unit, chipping unit, milling unit, profile milling unit, jointing milling unit, cross-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine Lrjdsb Uhpcspfx Agrjt -HOMAG unit carrier for milling units -with heavy guidance -laterally movable -with counter -Table height: 275 mm -Table surface: 3575 x 295 mm -Table thickness: 20 mm -Price: per piece -Quantity: 1x available -Dimensions: 3575/295/H275 mm -Weight: 356 kg

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table Lrodpfxob Uhple Agrst -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Condition: good (used), Control card, input card, control system, edgebanding machine, edgebander Lodocc Ap Ujpfx Agrort -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083015102/5103 -Number: 1x control card available -Dimensions: 20/190/H260 mm -Weight: 0.28 kg

Condition: good (used), Control card, output card, control unit, edgebander, edgebander Lodpfx Agecc Aqcjrert -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083015403/04 -Number: 1x control card available -Dimensions: 20/190/H260 mm -Weight: 0.34 kg

Condition: good (used), Conversion processor, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: Homag Homatic -Type: 2Type: 2083027420 -Number: 1x control cards available -Price: per piece Ljdocc Aqnspfx Agrort -Dimensions: 20/195/H265 mm -Weight: 0.36 kg

Condition: good (used), Control card, input card, control, edge banding machine, edge banding machine Lsdpfx Ajcc Aqpogrjrt -Manufacturer: HOMAG HOMATIC -Type: 4-008-39-0002 -Type: 4008390002 -Number: 2x control cards available -Price: per piece -Dimensions: 135/65/H200 mm -Weight: 0.5 kg

Condition: good (used), Power supply, control board, input board, control unit, edgebander, edgebander -Manufacturer: Homag Homematic -Type: 2Type: 2083027013 -Number: 1x tax card available -Dimensions: 20/195/H265 mm Ljdjcc Aqqepfx Agrsrt -Weight: 0.5 kg

Condition: good (used), Control card, output card, control, edge banding machine, edge banding machine Lsdpfx Aocc Aquegrert -Manufacturer: HOMAG HOMATIC -Type: 2Type: 2083015406/07 -Number: 1x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.31 kg