Used Hsd Electrospindle Es362 for sale (262)

Condition: used, machine/vehicle number: 008481, X axis working area: 6360 mm Gedpfxsy Edpmo Alxsit Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Y axis working area: 2185 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Gjdpfx Alsyngzvjxoit Total number of drilling spindles: 18 Total number of tool changer positions: 20

Condition: good (used), Year of construction: 2014, machine/vehicle number: 9911832, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: HSK F63, tool diameter: 20 mm, tool length: 150 mm, tool weight: 3,000 g, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: Giedpfx Alou Dl R Uexet - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm - Centralised lubrication

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Hybrid table, i.e. vacuum table, enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes Gjdpfx Alotu I Huoxsit The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard Drive transmission is via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation Manufacturer: TechnologieCNC Model: 1325 INDUSTRY 2.0 Electric spindle: 6kW, 24000 rpm. on full ceramic bearing Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1300x2500x300mm - Hybrid table (vacuum+T-slot) Control: NK-105 Controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz For transport - 307 / 190 / 220 Machine assembled and ready to work - 307 / 225 / 230

Condition: new, Year of construction: 2026, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Gsdpfotu H Tujx Alxeit Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Included with the Milling Machine Becker KVT 3.140 Vacuum Pump Manufacturer: TechnologieCNC Model: 1530 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1500x3000x300mm - Hybrid table (vacuum+T-slot) Control: NK-105 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Dimensions: For transport - 365 / 210 / 220 Machine assembled and ready to work - 365 / 245 / 230 Gjdpfx Aletu S Sroxoit Hybrid table, i.e. vacuum table enabling non-invasive element fixing, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller A tool height sensor is included A central oil lubrication system for trolleys and guides as standard The drive is transferred via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 ATC series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 ATC series CNC milling machine with a working surface of 2100x4000mm and a clearance in the Z axis of 300mm is equipped with a 9kW electrospindle and 24000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots allowing manual clamping of irregular shapes. ATC - The machine is equipped with an automatic linear magazine with a capacity of 8 tools. The automatic cutter changer does not require manual tool changing by the operator. Within one process, the machine can perform a multitude of operations such as surface planning, milling and drilling with various tools. Reinforced HEAVY DUTY construction - the machine body consists of profiles with a wall thickness of up to 10 mm. The frame is welded in its entirety, then subjected to a stress-relieving process in special conditions, and finally milled. This sequence of the process ensures the achievement of excellent results in stiffness, stability and vibration resistance. INDUSTRY 2.0 is a must-have in production plants requiring maximum machine efficiency. Worktable size - X - 2100mm, Y - 4000mm, Z - 300mm Drive - Leadshine servo drives with 1500W power and high holding torque (Double on the Y axis) Drive transmission - The most precise NIDEC SHIMPO planetary reducers Runner system - PMI 25mm linear guides and carriages with helical inclined strips with maximum contact surface Electric spindle - 9kW, 24000 rpm on full ceramic bearings Guide lubrication system - Automatic Tool length measurement system - Automatic Control system - NK-105 G3 controller Cables - Fireproof, adapted to bending and protected against deformation Manufacturer: TechnologieCNC Model: 2140 INDUSTRY 2.0 ATC Max. working speed in free passes: up to 33m/min Max. working speed in material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (ramp entry function, automatic NESTING) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz A German vacuum pump BECKER VTLF 2.250 of the renowned BECKER brand with a capacity of up to 244m3/h is included in the standard equipment of the machine. Gjdpfstvmcmox Alxjit

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Working area X: 4000 mm Working area Y: 1500 mm 5-axis electrospindle Secondary spindle Vertical drilling units: 14 Horizontal drilling units X: 6 Horizontal drilling units Y: 2 10-position tool changer on machining head 10-position tool changer 8-position linear tool changer Worktable with 8 beams Software: TPA Albatros Vacuum pump Chip conveyor belt Gsdsy Hqbljpfx Alxjit Safety mats Side protective nets

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Working area X: 3600 mm Working area Y: 1250 mm Maximum workpiece clearance: 70 mm 3-axis electrospindle SK30: spindle taper for tools Vertical drilling units: 13 Horizontal drilling units X: 4 Vertical drilling units Y: 2 Worktable: Nesting FT 18-position tool changer Control: PC Control Giedsy Hp Scspfx Alxjt Safety mats Protective nets

Condition: new, Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Max. working speed 30 m/min Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 4*5,5 kW(50/60 Hz), air cooled Electrospindle: Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Giodpfxodz Edqe Alxet Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Extraction air speed 25 m/sec Suction hood diameter 2x150 mm Made in China Weight 3500 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Working area X: 4970 mm Working area Y: 2120 mm Working area Z: 350 mm 5-axis electrospindle Linear tool changer with 12 positions Nesting worktable 3 vacuum pumps of 250 m3/h each Godpfx Ajy Hknrjlxjit Software: Xilog Plus Protection and safety system with bumper on processing head Automatic lubrication system Weight approx. 8,850 kg.

Year of construction: 2005, condition: used, CNC Machining Center 4 Axes – FOM (Aluminium/Steel Profiles) Configuration: 4-axis CNC Working length (X): 7,030 mm Condition: Working, maintained - Main Features CNC machining center designed for drilling and milling operations on aluminium and steel profiles, ideal for window and industrial profile production. 4-axis spindle (0° / 90° / 180°) for multi-side machining Electrospindle 4 kW – up to 12,000 rpm Tool holder: ISO 30 DIN 69871 6-position automatic tool magazine 6 pneumatic clamps (manual positioning) Gijdpfxeywhf Ns Alxet THK linear guides for high precision - Control & Software Software: FomCam + Prof2 (Windows XP) Easy programming with automatic CNC generation Movable control console (PC + display + keyboard) Barcode reader connection Remote control capability 📏 Technical Data X-axis: 7,030 mm Y-axis: 1,100 mm Z-axis: 425 mm Machine dimensions: 8,307 x 1,875 x 2,460 mm Weight: 3,200 kg - Equipment Forced air spindle cooling Inverter-controlled spindle Automatic lubrication Protected tool magazine with rotary system - Machine ready to work, ideal for aluminium profile machining and window production.

Condition: used, Year of construction: 2022, machine/vehicle number: EVE0800220Z700 1Z, BACCI ARTIST.TGV 6-Axis CNC Machining Center, Year 2022 BACCI ARTIST.TGV is a rigid double-table 6-axis CNC machining center designed for the production of chairs, furniture parts, tables, beds, stair components and other complex solid wood or composite elements. The machine features a robust gantry construction, independent TGV working tables and OSAI numerical control with Business PC interface. It is suitable for precise and flexible machining of complex parts in furniture and joinery production. Main technical data 6 interpolated axes X axis: 2600 mm Distance between columns: 2500 mm Y axis: 2200 mm Z axis: 830 mm C axis: ±400° A axis: unlimited Operating head type T2+2 2 electrospindles, double outlet, 7.5 kW, ER32 tool connection Spindle speed up to 18,000 rpm OSAI digital control with Windows Business PC Programming with PITAGORA, ALPHACAM post processor included Power supply: 380 V / 50 Hz Machine configuration Gedpfx Ajy D Uggolxsit 2 independent patented TGV working tables, 900 mm width each Steel TGV supports, prepared for vacuum connection 2 vacuum pumps, 100 m³/h each 3+3 clamps for jigless work 2 front supports in X direction for jigless clamping 12 vacuum cups 2+2 side reference supports 1+1 front supports Preparation for future turning unit installation UPS for PC Air conditioner for electrical cabinet Tele-service included BCK tool extension included CE safety guarding included Condition Year of manufacture: 2022 Real condition: very good Machine is still connected and can be tested CE certificate available Lightly used, approx. 2000 working hours Programming with PITAGORA, ALPHACAM post processor included Main advantages Rigid gantry frame for stable and accurate machining Double independent table solution for flexible production Suitable for complex 3D machining operations Efficient workholding with vacuum and clamp system Remote service capability Ready for demonstration under power

Condition: used, machine/vehicle number: 008088, X axis working area: 3700 mm Y axis working area: 2100 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Giedpfx Aex A Hbqolxjt Total number of tool changer positions: 14

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 159879, 🔥 PREMIUM LISTING – FISCHER MFV-1260 HIGH-SPEED ELECTROSPINDLE 🔥 50,000 RPM | HSK-C32 | TOP CONDITION | READY FOR PRODUCTION High-end FISCHER MFV-1260 electrospindle available for sale – a premium solution for precision grinding and high-speed CNC machining. Ideal for demanding industrial environments where accuracy and reliability are critical. ⸻ ⚙️ Key Specifications • Model: FISCHER MFV-1260 • Maximum speed: 50,000 RPM • Tool interface: HSK-C32 (Automatic Tool Change) • Type: High-frequency electrospindle • Built for high precision & high-speed applications ⸻ ✅ Condition & Performance • Professionally tested and verified • Excellent running condition – smooth operation • No abnormal noise, no vibration • Spindle is ready for immediate installation • No crashes, no hidden defects ⸻ 🎯 Typical Applications • Internal & external grinding • High-speed milling • Precision machining (aerospace, molds, tooling) ⸻ 📦 What’s Included • Complete spindle unit (as shown) • Carefully packed for safe transport ⸻ 💎 Why this spindle? • Premium Swiss/German engineering quality • High reliability at extreme speeds • Excellent value compared to new (save thousands €) ⸻ 💰 Price: [7000 € – negotiable] Giedpfx Aey Hpbwelxst 📍 Location: Romania 🌍 Worldwide shipping available ⸻ 📹 Extra • Running video available on request • Additional photos & technical details available ⸻ 📩 Serious inquiries only. Ready to ship – fast deal preferred.

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Gjdpfx Alsyqxxrexoit Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Year of construction: 2020, operating hours: 1,400 h, condition: excellent (used), functionality: fully functional, X axis 7435 mm Y axis 530 mm Z axis 410 mm A/A1 axis ± 125° Electrospindle power: 8.5 kW Max. speed: 24,000 rpm Tool holder: HSK F63 10-position tool changer 8 individually motorized standard vices Pendulum machining Four retractable standard stops Tool length measuring device Workpiece length probe Gedsy E S Rlspfx Alxsit

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 221/2-306, functionality: fully functional, operating hours: 207 h, type of input current: three-phase, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, workpiece length (max.): 1,000 mm, number of axes: 3, number of slots in tool magazine: 4, total height: 2,500 mm, total length: 1,500 mm, total width: 2,500 mm, overall weight: 3,000 kg, Equipment: CE marking, documentation/manual, HOLZ-HER EVOLUTION 7402 4MAT – Vertical CNC Machining Center Year of manufacture: 2023 Operating hours: 207 h Availability: Immediately High-performance industrial vertical CNC machining center suitable for milling furniture carcasses and other components from wood and laminated panels. Key Features - Vertical machining with highly accurate vacuum positioning system (including complimentary vacuum pads) - Rear clamping for processing all edges of the workpiece, enabling complete machining without repositioning - Laser length measurement system - Air-conditioned control cabinet - Uninterruptible power supply for computer unit Technical Specifications - Working length: 200–3200 mm - Working height (Y): 70–920 mm - Panel thickness: 8–70 mm - Maximum speed: - Vector: 68 m/min - Per axis: X 25 – Y 60 – Z 20 m/min Machining Unit Gsdpfsy Eygnox Alxeit - 10.3 kW electrospindle (air-cooled) - HSK-F63 tool holder - 4-position tool magazine - XL boring unit – 19 drilling spindles (13 vertical, 6 horizontal) - Groove saw in Y-direction Software and Control - Complete CAMPUS V7 EVOLUTION CAD/CAM software - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter, Scenes - Integrated 3D simulation - Intuitive programming and advanced machining management - Remote control console - USB port - Wifi Equipment - ECO vacuum system (8 m³/h)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Working area X: 4600 mm Working area Y: 1570 mm Working area Z: approx. 250 mm 3-axis electrospindle Vertical drilling heads: approx. 22 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Grooving saw blade in X direction Godpfx Aoy Exz Dolxsit Fixed horizontal motor for door lock mortising Chain-type tool changer with approx. 22 positions Worktable with 8 beams Vacuum pump 90 m³/h Software: BiesseWorks Safety mats Protective safety nets Weight: approx. 6100 kg Including vacuum suction cups and 1 tiltable aggregate for drilling-routing-sawing

Condition: excellent (used), Year of construction: 2015, 📌 Glass Processing Center – DENVER Krea / Krea Fit (CNC) General Description: A professional 3-axis CNC glass processing center by DENVER – model Krea (also commonly known as Krea Fit), designed for comprehensive processing of flat glass. The machine combines functions such as grinding, milling, drilling, edge shaping, and polishing, making it an ideal solution for glassworks, window manufacturers, producers of decorative elements, and appliance (white goods) manufacturers. ⸻ 🛠️ Technical Features and Functions 🔹 CNC Construction: 3 interpolated axes ensure precise tool guidance and high processing quality. 🔹 Spindle: powerful electrospindle with a power rating of approx. 6.6–9 kW (S6), optimized for glass working. 🔹 Automatic Tool Changer: 14-position tool magazine (standard), which speeds up operations and increases work flexibility. 🔹 CAD-CAM & CNC Control: an intuitive CNC control system with CAD-CAM support simplifies programming and 2D/3D model processing. 🔹 Automation: can be equipped with an integrated automatic loading and unloading system, handling trolley, and robot for glass sheet handling. 🔹 Vacuum Kit: additional vacuum tank and distributor for stable glass clamping during processing. 🔹 Helpful Accessories Included:  • various vacuum suction cups,  • tool sets, Gijdpfoy Edlbsx Alxst  • reverse osmosis system (e.g. IDROTECNICA IDRO RO 130 ST),  • tanks and auxiliary equipment. ⸻ Kdsboyk Dx Dsludqncok 📏 Working Range ✅ Supported Materials: flat glass of various thicknesses (typically from a few mm up to approx. 25 mm – depending on tool configuration and program). ✅ Possible Operations:  • edge grinding,  • drilling and milling holes,  • beveling and rounding edges,  • engraving and cutting shapes

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Giodpfxsyzyrvj Alxot Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008480, X axis working area: 4600 mm Y axis working area: 1935 mm Gsdoy Edqkjpfx Alxeit Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 5 axes Total number of drilling spindles: 31 Total number of tool changer positions: 58

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Gjdpfx Alsx A Hbkoxeit Total number of tool changer positions: 26

Condition: used, machine/vehicle number: 008200, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 21 Godpfx Alsx A Ti Usxjit Total number of tool changer positions: 5

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Godoygtcqjpfx Alxjit Total number of drilling spindles: 27 Total number of tool changer positions: 8