Used Isgec 300T - 2500T for sale (199)

Condition: new, New High speed press from min. 63t up to max. 630t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Bwodjgayiajpfx Ahmsu

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm Bwodpfexdt Umox Ahmeu 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm Bjdpjdyynvefx Ahmswu

Condition: new, MVD Synchronized Hydraulic Bending Press Ready in stock unless sold out! Mod. I-Bend D 3100/320 Color Videographic Numerical Control ESA S875 W *dxf Controlled axes No. 8 ( Y1-Y2-X-R-Z1-Z2-X5_A1) WILA motorized compensation table Multi-beam barriers NEW ELECTRONICS DSP LASER UNIMEC high-speed motorized rear register (Made in Italy) GIVI MISURE optical scales (Made in Italy) Bending length mm 3100 Power exerted Ton 320 Bwsdpfxjrqvtms Ahmju Recess mm 510 Stroke mm 410 Opening mm 635 Upper tools and lower die ROLLERS supplied

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 252800 € 600 to 4050 mm Y1 / Y2 / X und R Achse 365 mm 3100 mm 410 mm 700 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 154 mm 280 l 5750 mm 2500 mm 4000 mm 40500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German Bwjdpeynmxnefx Ahmou ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S CNC control Delem DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, oil tank capacity: 400 l, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Bsdpfx Aoxwnqcohmowu

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data: AD-R 60400 Bending force: 400 tons Bending length: 6050 mm Bwedpfx Ajfin Hwohmsu Distance between uprights: 5100 mm Stroke: 365 mm Installed height: 630 mm Throat depth: 510 mm Optional throat depth: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y-axis rapid traverse: 120 mm/sec. Y-axis working speed: 8 mm/sec. Y-axis return speed: 100 mm/sec. X-axis working speed: 250 mm/sec. R-axis working speed: 140 mm/sec. R-axis travel: 250 Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight approx. 35 tons With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center offers you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would now like to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: used, Year of construction: 2017, * Dynapac R 300 TVE 2 fixed screed * Year of manufacture: 2017 Bwedpsyq A S Nsfx Ahmeu * Paving width: 11.75 m - 13.75 m * More pictures and videos available via WhatsApp * Specifications subject to change without notice and prior sale reserved.

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Bedpfofiqdcsx Ahmewu Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front supports for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with globally applicable standards Electrical equipment, in accordance with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional front sheet metal support system, sliding Special sea packaging 8-meter press brake, 320 tons. Bilk9emkq3 With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our mission is to be your direct contact on site and to offer you services related to training and customer support. We are happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always there when you need us to react quickly and efficiently. Here, we are your reliable partner for technologically high-quality solutions in sheet metal processing.

Condition: new, Year of construction: 2024, Bending force: 320 t Year of manufacture: 2024 (New) Control system: DT 15 Bending length: 4050 mm Distance between columns: 3600 mm Y rapid traverse speed: 100 mm/s Y working speed: 10 mm/s Y return speed: 100 mm/s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Overhang: 450 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 350 mm/s Travel in X-axis: 750 mm Travel speed in R-axis: (max.) 300 mm/s Travel in R-axis: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Motorized rear stop with linear guide and ball screw Rear stop finger with height adjustment (R-axis, manual) CE upper tool clamping system Bsdsff Hvlepfx Ahmjwu Front support arms for sheets, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with globally applicable standards Electrical equipment, in accordance with globally applicable standards Option: CE certified Motorized crowning and X & R rear stop Motor power 37 kW Oil tank capacity 250 liters Length 5300 mm Width 1910 mm Height 3230 mm Weight approx. 20000 kg

Year of construction: 2024, condition: new, Here, we offer a customized tandem press brake. Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Bwsdpod Tpy Nsfx Ahmou Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal processing machines worldwide and has established itself as one of the world's largest manufacturers of sheet metal processing machines with its headquarters in Turkey. With over 60 years of experience in research and production of machines for sheet metal processing, annually producing 8,000 machines in three technologically advanced production facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA Maschinen are now among the internationally renowned producers in its industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact locally and to offer you services relating to training and customer support. We would now like to support you from Germany – from consulting and purchasing to the entire service life of your machine. With our German branch, we are always on site to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: used, power: 221 kW (300.48 HP), fuel type: hybrid, Type of fuel: Hybrid (electric and petrol) Field of application: Mining Make of engine: Perkins MODEL PTC300 Cone Model HP300 METSO Head diameter 1 120 mm (44") Bsdsygk Abopfx Ahmewu Power 220 kW (300 hp) Weight (complete crusher) 18 100 kg (39 900 lbs) Feed opening 241 mm (9 1/2") Maximum capacity 440 Mtph (485 Stph) Max Feed Size 47 - 250 mm Weight 49,400 kg Transport Dimensions (mm) 16,250 x 3,450 x 3,650 Operation Dimensions (mm) 16,200 x 4,490 x 4,500 Drive Hybrid Motor Volvo-Cummins-Perkins Tier 3-4

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 144300 € 2727.27 € 320 to 3050 mm Y1 / Y2 / X und R Achse 365 mm 2600 mm 410 mm 630 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 2 x 11 kW 4300 mm 1820 mm Bwedpfx Ajwiqphjhmju 3330 mm 16500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa Bwedpod Ehh Rofx Ahmju We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel Bwedpfoz Hgb Ajx Ahmeu - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins

Condition: new, Everything is configurable on request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, complying with globally applicable standards Electrical equipment, complying with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional sliding front support system for sheet metal Bodpfsfiqa Rsx Ahmjwu Special sea-worthy packaging 8-meter press brake, 800 tons. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to provide you with services relating to training and customer support. We are happy to support you from Germany – from consultation to purchase and throughout the entire life cycle of your machine. With our German branch, we are always available locally to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, Press force: 300 t Bending length: 4000 mm Distance between uprights: 3250 mm Overhang: 400 mm Installation height: 590 mm Stroke: 220 mm Return stroke speed: 80 mm/s Working speed: 8 mm/s Bodpfxsgiudxj Ahmowu Retraction speed: 80 mm/s Drive power: 22 kW Dimensions L x W x H: approx. 4150 x 1850 x 3100 mm Weight: approx. 20,000 kg Accessories / Special features: • CNC control Cybelec Cybtouch 12 P for Y1, Y2, X + automatic crowning o Simple operation, more efficient bending, and powerful functions o Touchscreen with bright colors • 5 x 800 mm upper tool PM 1, slightly bent, R=0.8 mm, pressure load 100 t/m, tip 88° • Universal die 95 x 95 mm with multiple V-openings • Laser safety curtain FISSLER on the right and left on the front side panels • Automatic hydraulic crowning device in the lower beam • Back gauge with linear guides • 3 front support arms • Foot pedal • Painting: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 • Operating manual • CE conformity Delivery time: approx. 2-3 months after receipt of order plus pre-carriage costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Synchronized hydraulic bending press MVD Available in stock, subject to prior sale! Bsdsfh N Agjpfx Ahmowu Model: I Bend D 4100/320 ESA W660 color video CNC control Number of controlled axes: 7 (Y1-Y2-X-R-Z1-Z2-X5) Motorized WILA back gauge Multi-beam barriers with NEW DSP LASER electronics High-speed motorized rear stop UNIMEC (Made in Italy) GIVI MEASURES optical sensors (Made in Italy) Bending length: 4100 mm Tonnage: 320 tons Throat depth: 510 mm Stroke: 410 mm Opening: 635 mm Includes upper tooling and lower die from ROLLERI

Year of construction: 1992, condition: used, machine/vehicle number: 80076, pression: 400 t working width: 4100 mm Bwjdpobfk Anjfx Ahmsu clear support width: 3150 mm support throat: 330 mm electrical connection: 400 V, 37 kW weight: ca. 25 t space needed: 4100 x 2300 x 3910/530 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,974 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,318 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery capacity: 930 Ah, remaining battery capacity: 95 %, battery voltage: 48 V, fork carriage width: 1,400 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 45 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 559 / 254 - 406, overall weight: 9,420 kg, empty load weight: 6,920 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # COMBILIFT CBE2500 | ELECTRIC | TRIPLEX 4900 MM | FREE LIFT | FORK POSITIONER | FULL CAB | READY TO WORK ## ✅ FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY Are you looking for a forklift that starts generating value from day one, rather than creating unexpected maintenance costs? The COMBILIFT CBE2500 is fully serviced, thoroughly inspected, and ready for immediate operation. Whether you work in manufacturing, warehousing, steel processing, or timber handling, this machine is prepared to perform from the moment it arrives. --- ## ⭐ Key Advantages ✔ Fully serviced before delivery ✔ Start-up warranty included ✔ Brand-new super elastic tires ✔ Excellent mechanical and cosmetic condition ✔ Ready to work with no additional investment required ✔ Live online video inspection available ✔ Direct delivery to your facility anywhere in the world --- # 📋 Technical Specifications 🏭 Manufacturer: COMBILIFT 📌 Model: CBE2500 📅 Year of Manufacture: 2018 ⚡ Power Type: Electric 🏋️ Load Capacity: 2,500 kg ⏱ Operating Hours: 2,974 h ⬆️ Mast: Triplex 📏 Lift Height: 4,900 mm ↔️ Fork Positioner: 1,400 mm 📐 Fork Length: 1,150 mm 🚜 Cab: Fully Enclosed & Heated ⚖️ Operating Weight: 6,920 kg --- # 📐 Dimensions 📏 Overall Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,500 mm 📏 Lowered Mast Height: 2,250 mm --- # 🛞 Tires Front: 16 x 7 x 10 1/2 Rear: 559 / 254 - 406 ✅ Condition: 100% Brand New --- # 🔧 Equipment ✅ Fork Positioner ✅ Side Shift ✅ Free Lift ✅ Fully Enclosed Heated Cab ✅ Working Lights --- Bjdpsz H A Rmjfx Ahmswu # 🏭 Ideal Applications 🌲 Timber Industry 🏗 Steel Mills & Steel Service Centers 🏭 Structural Steel Manufacturers 📦 Handling Pipes, Profiles & Long Materials 🏢 Indoor & Outdoor Operations --- # 🌍 Why Choose FT LOGISTICS? When you buy from FT LOGISTICS, you are purchasing from a company specializing exclusively in: ✔ Forklifts ✔ Sideloaders ✔ Multidirectional Forklifts ✔ Warehouse Equipment Every machine undergoes a comprehensive technical inspection, professional servicing, and operational testing before delivery. We maintain an inventory of 100+ machines available for immediate shipment and deliver equipment to customers throughout: 🌍 Europe 🌎 South America 🌍 Africa 🌏 Asia 🌍 Middle East --- # 🤝 What We Offer 🔧 Complete Pre-Delivery Service 🛡 Warranty 👨‍🔧 Professional Technical Advice 💳 Leasing & Financing Solutions 🚛 Worldwide Transport 📄 Export Documentation & Customs Clearance 🤝 After-Sales Support --- # 📹 Need More Information? We can provide: 🎥 Live Online Machine Demonstration 📷 Additional High-Resolution Photos 🎬 Detailed Videos 📋 Customized Transport Quotation 🌍 Worldwide Shipping Solutions --- ## ⭐ Why Our Customers Choose Us Hundreds of companies across Europe and worldwide trust FT LOGISTICS for reliable, work-ready equipment. Our customers return because they know they receive professionally prepared machines backed by expert support and international logistics experience. --- # FT LOGISTICS ### 🚛 We Deliver Machines Ready to Work. Professional Forklifts | Sideloaders | Multidirectional Forklifts | Warehouse Equipment | Worldwide Export

Condition: new, neu ca. 4-6 Monate ab Auftrag Türkei 231900 € 400 to 6050 mm Y1 / Y2 / X und R Achse 365 mm 5100 mm 510 mm 630 mm hydraulisch 150 mm/s 9 mm/s 150 mm/s 750 mm 160 l 7500 mm 2110 mm 3810 mm 34600 kg Bodpjwir Avsfx Ahmjwu 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 292300 € 600 to 6050 mm Y1 / Y2 / X und R Achse 365 mm 5100 mm 510 mm 700 mm hydraulisch 80 mm/s 6,5 mm/s 80 mm/s 750 mm 280 l 2 x 11 kW kW 7600 mm 2650 mm 3950 mm 52500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S Bwodpjwiqmaefx Ahmeu CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered Bsdpfx Aou Ib Drjhmjwu - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,974 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,318 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery capacity: 930 Ah, remaining battery capacity: 95 %, battery voltage: 48 V, fork carriage width: 1,400 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 45 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 559 / 254 - 406, overall weight: 9,420 kg, empty load weight: 6,920 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # COMBILIFT CBE2500 | ELECTRIC | TRIPLEX 4900 MM | FREE LIFT | FORK POSITIONER | FULL CAB | READY TO WORK ## ✅ FULLY SERVICED | WARRANTY | WORLDWIDE DELIVERY Are you looking for a forklift that starts generating value from day one, rather than creating unexpected maintenance costs? The COMBILIFT CBE2500 is fully serviced, thoroughly inspected, and ready for immediate operation. Whether you work in manufacturing, warehousing, steel processing, or timber handling, this machine is prepared to perform from the moment it arrives. --- ## ⭐ Key Advantages ✔ Fully serviced before delivery ✔ Start-up warranty included ✔ Brand-new super elastic tires ✔ Excellent mechanical and cosmetic condition ✔ Ready to work with no additional investment required ✔ Live online video inspection available ✔ Direct delivery to your facility anywhere in the world --- # 📋 Technical Specifications 🏭 Manufacturer: COMBILIFT 📌 Model: CBE2500 📅 Year of Manufacture: 2018 ⚡ Power Type: Electric 🏋️ Load Capacity: 2,500 kg ⏱ Operating Hours: 2,974 h ⬆️ Mast: Triplex 📏 Lift Height: 4,900 mm ↔️ Fork Positioner: 1,400 mm 📐 Fork Length: 1,150 mm 🚜 Cab: Fully Enclosed & Heated ⚖️ Operating Weight: 6,920 kg --- # 📐 Dimensions 📏 Overall Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,500 mm 📏 Lowered Mast Height: 2,250 mm --- # 🛞 Tires Front: 16 x 7 x 10 1/2 Rear: 559 / 254 - 406 ✅ Condition: 100% Brand New --- # 🔧 Equipment ✅ Fork Positioner ✅ Side Shift ✅ Free Lift ✅ Fully Enclosed Heated Cab ✅ Working Lights --- # 🏭 Ideal Applications 🌲 Timber Industry Bwsdpfx Ahoz E Hxfjmou 🏗 Steel Mills & Steel Service Centers 🏭 Structural Steel Manufacturers 📦 Handling Pipes, Profiles & Long Materials 🏢 Indoor & Outdoor Operations --- # 🌍 Why Choose FT LOGISTICS? When you buy from FT LOGISTICS, you are purchasing from a company specializing exclusively in: ✔ Forklifts ✔ Sideloaders ✔ Multidirectional Forklifts ✔ Warehouse Equipment Every machine undergoes a comprehensive technical inspection, professional servicing, and operational testing before delivery. We maintain an inventory of 100+ machines available for immediate shipment and deliver equipment to customers throughout: 🌍 Europe 🌎 South America 🌍 Africa 🌏 Asia 🌍 Middle East --- # 🤝 What We Offer 🔧 Complete Pre-Delivery Service 🛡 Warranty 👨‍🔧 Professional Technical Advice 💳 Leasing & Financing Solutions 🚛 Worldwide Transport 📄 Export Documentation & Customs Clearance 🤝 After-Sales Support --- # 📹 Need More Information? We can provide: 🎥 Live Online Machine Demonstration 📷 Additional High-Resolution Photos 🎬 Detailed Videos 📋 Customized Transport Quotation 🌍 Worldwide Shipping Solutions --- ## ⭐ Why Our Customers Choose Us Hundreds of companies across Europe and worldwide trust FT LOGISTICS for reliable, work-ready equipment. Our customers return because they know they receive professionally prepared machines backed by expert support and international logistics experience. --- # FT LOGISTICS ### 🚛 We Deliver Machines Ready to Work. Professional Forklifts | Sideloaders | Multidirectional Forklifts | Warehouse Equipment | Worldwide Export

Condition: new, pressure: 320bending length: 3020column width: 2555daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 3785x2290x3100weight approx.: 14.4504 axes (Y1, Y2, X, R): Ja alle Achsen über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Bsdsd Ehikspfx Ahmjwu