Used Kingway Concrete Power Trowel Smoothing Machine Blade Trowel for sale (82,803)

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Bedourkypepfx Aphjdf Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1300x1800 mm Weight 0 kg Total power requirement 2,2 kw Bjdpfxev A Hgks Aphsdf

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition Bdodpfx Apsd N E Rvshjf The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Bdodjyhq A Rspfx Aphef Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Year of construction: 2023, operating hours: 0 h, condition: new, MT900P is suitable for smoothing the concrete. Product information: - Motor: Honda GX200 - Power: 6,5 hp (Benzin) - Cubic Capacity: 196 cm³ - Power Diameter: 900 mm - Blade Diameter: 950 mm - Blade Qty: 4 - Blade Pitch Angle: 0-20° - Plate Weight: 16 kg - Length (Open Arm): 1910 mm - Length (Closed Arm): 1020 mm - Width: 950 mm - Height (Open Arm): 1100 mm - Height (Closed Arm): 930 mm - Fuel Consumption: 1,7 l/h - Fuel Capacity: 3,6 l - Oil Capacity: 0,6 L - Net weight: 100 kg Bjdpfom Tin Iex Aphedf Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: excellent (used), - maximum length of sharpened knives 600mm - largest working travel of tool slide 660mm - the largest traverse of the cross slide 160mm - largest horizontal travel of the grinding head 140mm - rotation of the grinding head in the horizontal plane 360 degreesni - rotation of the grinding head in the vertical plane ± 30degrees Bdodpfx Apetn Rn Nehof - the largest vertical travel of the grinding head 240mm - has liquid cooling

Condition: excellent (used), Year of construction: 2014, Manufacturer: Henrik WINTER HOLZTECHNIK GmbH (Leipzig, Germany) Model / type: SAWMAX 600 Year of manufacture: 2014 Serial number: 130705-28 Power supply: 3×400 V, 50 Hz Bdedpfx Apsw R E Slshef Maximum power: 1.69 kW Weight: 650 kg Certificate: CE

Year of construction: 2026, condition: new, functionality: fully functional, ZIM BT 1200 machine is designed to increase efficiency for production of manhole base, parcel base products etc. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. The machine consistes of 3 different part. Pallet Stocking Robot, Vibration and Moulding Unit, Mortar Filling Cart. This machine can produce pipes 1200mm diameter and 1500mm height. Bedpfoibywlox Aphjdf This machine makes all the production full automatic and we use SIEMENS brand PLC microprocessors on it. There is mortar filling cart on machine. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. There is a Pallet Stocking Robot system and it gives the pallets to the machine automatically. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: new, functionality: fully functional, color: white, overall weight: 25,000 kg, operation weight: 30,000 kg, Year of construction: 2024, machine/vehicle number: 15362024021, ZIM 1536 machine is a high-end machine designed for the production of concrete blocks, concrete paverstones and concrete curbstones. ZIM 1536 comes out with high-end hardware, wide options of production and low labor cost. It can be used in automatic facilities such as FINGER CAR, BASKET SYSTEM, L TYPE SYSTEM. Bedsfnz Uzjpfx Aphsdf Our machine that can produce 15 blocks or 36 paverstones in one press, is designed to produce 1200-1400 pallets per day. Aiming at maximum capacity with mass production, our machine is designed to work non-stop! Our machine, which can follow the mortar in machine with the loadcell system in the bunkers, takes you to the next level with the proportional mortar car movement, and reaches the maximum quality with the mold balancing and pressing system, is a pioneer in the sector with its many hardwares! Our machine which uses pneumatic system in the mold connection system, can perform the mold change process in 15 minutes. For the mold changing process, the machine body is separated from the press side on the rails, and all body height adjustments are made automatically. We are using “ VIBROSTAR ” oil bathed vibration systems in our machine. The oil bathed vibrations are also cycling the oil automatically and we keep the vibration süper cool always! We use 6 engines and total 33kW energy. This vibration engines are shaft connected to our special vibration system. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Bdjdpfxjypbx Es Aphof Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: good (used), Year of construction: 1987, machine/vehicle number: Kahny, Fully working Bodpfx Apexp N I Hehsdf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 1590, Equipment: cabin, hydraulics, Zenith Machinenfabrik GMBH Neunkirchen/Siegerland GERMANY Used for production of concrete vibropressed pavement and borders. The machine is fully functional and it comes togheter with 2 mixers, bunkers for aggregates, skippers, packaging machine and 150 pallets for production. It also has included molds for different pavement models. Bdodpfxsucruuj Aphof We also have to sale a Mobil Zenith 941 II A from 1978 which also has the identification plate attached. The machine is beeing sold because it was replaced with newer techonology.

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. Bedpjirtdpjfx Aphodf This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, The innovative flash butt welding machine for bandsaw and bimetal blades is developed entirely by our engineering department. It guarantees perfect welds and precise repeatability of the process. User friendly touch screen display from Schneider Electric that allows you to operate the machine effortlessly. The welding process is fully automatic, with the capability to adjust the electric current in 6 stages. The machine also allows for stepless regulation of electric current during annealing and pyrometric control throughout the welding process. The FBM10 is extremely easy to set up and cost-effective to maintain. Power supply voltage 400V Rated transformer capacity at 50% duty cycle 5kVA Frequency of electrical current 50HZ Clamping of the band saw blade Manual or Hydraulic clamping /Optional FBM 10.02/ Bdedsxhf Dzepfx Aphjf Annealing Manual or Automatic, with pyrometric control /Optional/ Menu language Bg / En / Possibility for welding: - band saw blades for wood mm 6÷60 - Bi-metal band saw blades mm 6÷54 - stainless steel band saw blades mm 6÷40 - band saw blades without teeth mm 6÷50 Weight: 197kg Dimensions: (length х width х height) mm 910 х 640 х 530

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Bdjdpjxlfwpjfx Aphsf Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Bdsdoxliguspfx Aphef Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, Technical Specifications Model: KMF10 Operated: Spring pressure Power: 10KVA (%50 DC) Welding Capacity: Up to 60mm mild steel strip Input Voltage: 220V (50Hz) Protection Fuse: 220V / 40A Welding Power Level: 5 Annealing Power Level: 5 Power Input Cable: 2,3m Protection Class: IP21 Dimensions (W/L/H): 160cm x 180cm x 79cm Weight: 294Kg Bdedpfx Apevmyalshof

Year of construction: 2022, condition: new, ZIM 820 Concrete Pavers and Block machine can operated semi automatically with the control of the operator. Upon request, it can be manufactured fully automatic with PLC control. By changing moulds all kinds of pavers stone , curbs, block and precast concrete elements such as grass pavers series can be produced in a serial way. 20cm block can be produced 8 units in one press with the machine,or 20 interlock stones can be produced in a press. Machine is able to produce the insulated block upon demand. Our company’s special production vibrator is used. Thus, it can produce smoothly and quickly. Collector Robot (cuber) can be used to empty the dried products on the production pallets. Bedpfjia N Idex Aphsdf A model with a single hopper, ZIM 8, is also available for manufacturing single layer bricks/pavers, hollow block, and for special blocks/pavers.

Year of construction: 2022, condition: new, ZIM A3600 machine can make concrete pipe, square culvert and other concrete materials between 800mm-3600mm diameter and 2000mm-3500mm lenght. In this machines mortar stocking and filling operations are done by mortar conveyor band with bunker. Materials which produced in this machine are transferred to drying area via crane. Our machine is making production on steel pallets. Produced material is carried to drying area with outer mould. Bedpfxoibbigs Aphsdf After discharging the ready material to drying area, outer mold is movingto main machine for new production. Our Machine is working with hydraulic press and vibration systems. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. Special designed strong chassi of the machine enables long live producing without errors. Vibration table is made on high precision CNC machines.

Year of construction: 2022, condition: new, This system operates in automatic mode. The transfer of pallets between production line and curing area is carried out by Finger Car. 1 operator supervises the production process via control panel equipped with 4 different monitor, pc system. Automation system software has user-friendly interface and can be translated into customer’s preferred language. Production line requires the construction of curing chambers with racks. Steam curing is recommended for working in one shift and is mandatory for working in two shifts. Bsdsibcycopfx Aphodf Transfer of production pallets with green products to the curing chambers as well as the transfer of pallets with cured products to the cubing station is carried out by automatic pallet transport system known as Finger Car. Finger car consists of lower and upper electric trolleys, which move along a set of rails built perpendicularly to the concrete block production line. The upper trolley has steel forks for grabbing and holding pallets. It transfers concrete products to the curing chambers, going inside each chamber to place pallets with wet products on racks to cure. On its way back it takes a stack of pallets with cured products and loads it into the lowerator. The price given as 1.200.000 USD includes all the machine equipments, concrete batching plant and 3000 pallet rack system. It is very special offer for August 2022!

Condition: new, Year of construction: 2024, machine/vehicle number: 5182024016, Our ZIM 518 machine is an entry-level and investor-friendly machine designed for the production of double-layer paving stones. ZIM 518 comes out with low energy consumption, low investment cost and high return on investment. Our machine, which can produce 5 concrete blocks or 18 concrete paverstones in one press, is designed to produce 1000 pallets per day. However, if requested, it can also produce concrete curbstones of 1 meter length! To facilitate this production and increase quality; It has many features such as driver-controlled vibration system, special balancing system on the upper mold, and a specially designed vibration table. Our machine is designed as manual system and it is managed by the operator with a hydraulic unit and a joystick. Although it is a budget-friendly machine and can be installed within hours, our ZIM 518 machine enables the production of high quality paving stones. Our machine gives you a good position in the competition! We are using “ FULLDRIVE ” frequency controlled vibration systems in our machine. This helps the life cycle of vibration engines and also decreases the total electrical consumption of vibrators. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service. Bodpfx Aoicap Tophodf

Condition: new, Year of construction: 2025, machine/vehicle number: 12302022104, ZIM 18 ULTIMATE is a high-capacity, fully automatic concrete block machine designed for industrial-scale, non-stop production. With CNC-machined body components for maximum precision, advanced automation options, and low labor requirements, it stands as one of the most durable and efficient solutions on the market. Compatible with Finger Car, U-Type, and L-Type systems, it integrates seamlessly into any high-output facility. Bedpfx Aefnz T Rephsdf Precision Engineering and High Efficiency Capable of producing 18 hollow blocks per cycle and 1400–1600 pallets per 8-hour shift, ZIM 18 delivers consistent high-volume output. Its entire machine body is processed on CNC machining centers, ensuring perfect alignment, zero tolerance errors, and unmatched stability even under heavy workloads. Advanced Mortar Feeding and Compaction Systems The machine features a loadcell-based mortar monitoring system, enabling precise control over mortar flow. Its proportional mortar carriage includes a highly advanced agitator system, ensuring that the mold is filled evenly and quickly. Combined with a 4-point mold balancing system and an electronic mold stopper system, the machine guarantees uniform block density and superior surface quality on every press. Fast and Automated Mold Change The pneumatic mold connection system allows mold changes in less than 15 minutes. The machine body is separated from the press unit via rails, and automatic body height calibration eliminates any manual adjustments, minimizing downtime and operator intervention. VIBROSTAR Oil-Bath Vibration Technology ZIM 18 uses the VIBROSTAR oil-bath vibration system, designed for maximum cooling and continuous operation. With 6 shaft-connected vibration motors producing a total of 33 kW, the system ensures high-frequency, uniform compaction for exceptional block durability. This vibration unit, engineered with ZİM’s decades of expertise, is built to operate for years without malfunction, delivering unmatched performance and cost efficiency.

Year of construction: 2022, condition: new, ZIM T1200 machine can produce pipes 300mm – 1200mm diameter and 500mm – 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There exists motrar bunker and motrar filling systems on machines. Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Bedsibbikjpfx Aphsdf Special designed strong chassi of the machine enables long live producing without errors.

Year of construction: 2022, condition: new, machine/vehicle number: 82002022104, ZIM 1025 PLUS Block and Paverstone Machine is special design machine for block and interlock production that works fully automatic.The movement of the machine is programmed the PLC microprocessor computer. By changing moulds all kinds of blocks, paverstones, curbstones, grass stones, lentos and precast concrete elements can be produced in a serial way. 20cm block can be produced 10, interlock paverstones can be produced 25 units in one press. Machine is able to produce the insulated block upon demand. Thanks to special features developed by our engineers machine have very short cycle time. For example mould changing is wery easy and take short tme in new system. Automation system and operator panel which is developed and redesigned in long years become user friendly and useful. Bsdoifz Ahepfx Aphsdf With our special design vibration table you can produce high quality products with less energy. We use pneumatic bellows in machine mould connections, due to this system vibration on mould is expanded regular and uniform. Service and maintenance is easy thank to our strong machine chassis and ergonomic design

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Bsdjxiv Ugopfx Aphedf Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg