Used Mitutoyo Qvt1-L2022Il-D for sale (46,887)

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Bedpfoyhi Huex Adijdc Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Buy your coordinate measuring machine from the leading specialist in CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and guaranteed ready for use – quality you can trust. General machine data: Machine type: CRYSTA-Apex V9108 Year of manufacture: 2020 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw SP25M with SM modules Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to provide tailored advice to help you find the right machine for your measuring requirements. Worldwide delivery available upon request! Bjdpfxoyvit Sj Adiedc

Condition: not inspected (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 400 mm, table width: 730 mm, table length: 1,170 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 650 mm Z-axis travel: 400 mm Table dimensions (L x W x H): 1,170 x 730 x 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 1,100 mm x 2,300 mm Machine weight: 900 kg Bdedsyr H Drepfx Adijc EQUIPMENT Granite inspection plate Manual control Documentation and CDs External reference: Lot 9

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Bedpfx Adoynv E Roijdc Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: good (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex S9108 Year of manufacture: 2015 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head interface: PH10MQ Probe head: Renishaw TP2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 Bodpfx Adsyhmg Seiedc As specialists, we are happy to offer you personalized advice to find the right machine for your measurement requirements. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine (CMM) from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex C9168 Bdedpfx Aoxqnxajdijc Year of manufacture: mid-2006 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 800 mm Controller: UC-200H Operation manual: available Accessories: Probe head mount: Renishaw PH10MQ Probe head: Renishaw TP200 Additional accessories: Ceramic calibration sphere Renishaw change rack 1 x SCR-200 We are happy to provide individual advice as specialists to find the right machine for your measuring task. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Purchase your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly checked, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex 7106 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe: Renishaw TP 200 Renishaw Additional accessories: Ceramic calibration sphere, Windows 11 PC, MCOSMOS 4.0, calibration sphere Bdodpfxjyg Nl Ue Adiec We are happy to provide tailored advice as specialists to help you find the right machine for your measurement tasks. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex 9106 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consulting as specialists to help you find the right machine for your measurement task. Bdjdpfx Aeyg Iryodioc Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Bdedjyg Iy Depfx Adisc Machine type: Crysta C Apex 9208 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 900 x 2000 x 800 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide individual consultation as specialists to help you find the right machine for your measurement task. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,000 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been inspected, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta C Apex 123010 Year of manufacture: 2004 Bdjdpfx Aoyg I Alsdioc Manufacturer: Mitutoyo Measuring range: 1200 x 3000 x 1000 mm Accessories: Probe head mount: PH10MQ Probe: Renishaw TP 2000 Additional accessories: Calibration sphere (ceramic), Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer you expert advice as specialists to help you find the right machine for your measurement task. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl Messtechnik. With KNEISSL-Approved, you receive a used machine that has been checked, tested, and guaranteed to be ready for operation from A to Z – quality you can trust. General machine data: Machine type: Crysta Apex 9166 Year of manufacture: 2005 Manufacturer: Mitutoyo Measuring range: 900 x 1600 x 600 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to offer individual advice as specialists to help you find the right machine for your measurement application. Bdedpfx Adoyg Iubsisc Worldwide delivery available on request!

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 Bsdpfx Adoyq Ufusijdc * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims Bodpfxjyq Ufzo Adiedc * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-compartment tail lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights Bodpfsyq Ufnjx Adiodc * Multi-chamber tail lights

Condition: ready for operation (used), Year of construction: 2004, total height: 2,730 mm, product length (max.): 1,470 mm, CMM machine manufactured in 2004. This Mitutoyo Crysta-Apex C 776 features a measuring range of 700 mm in both X and Y axes, and 600 mm in Z. It includes advanced components such as a motorized Renishaw probe head and automatic temperature compensation. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C 776 machine we have for sale. Contact us for further details. Bdodoyhgbpspfx Adiec • Accuracy: MPEE = 1.9 µm + 4·L/1000 (with Renishaw TP200 probe) • Temperature compensation: Automatic temperature compensation (temperature sensor) • Controller: UC200H (including scanning card) Additional equipment • Probe head: Motorised Renishaw PH10M (7.5°), PHC10-3 head controller, PI200 interface • Probing system: Renishaw TP200 with 3× TP200 STD force modules • Probe changer: Renishaw SCR200 with 6 parking positions • Stylus set: Basic stylus set (5 pcs) • Calibration equipment: Ceramic calibration sphere Ø 20 mm • Software: MCOSMOS v4.3 with CAD option; active modules: GEOPAK, CAT1000S, IGES, STEP, STATPAK, Scanning Probes, Laser Probe Support, Export Status Information • Computer system: Industrial PC with Windows 10 operating system

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, overall weight: 2,947 kg, number of axes: 3, This 3-axis Mitutoyo Crysta-Apex S9166 was manufactured in 2018. It features a comprehensive measuring range with X-axis at 900 mm, Y-axis at 1600 mm, and Z-axis at 600 mm. Equipped with CNC control and MCOSMOS-3 CNC V4 software, it includes a Renishaw PH10MQP R2 indexing probe head and SP25M scanning probe system. Additional equipment includes eco-fix CMM fixturing systems and a high-capacity CEE power cable. Consider the opportunity to buy this Mitutoyo Crysta-Apex S9166 CMM machine. Contact us for more information. • Control & software: CNC control; MCOSMOS-3 CNC V4 • Probe system: Renishaw PH10MQP R2 indexing probe head; SP25M scanning probe system; multiple stylus holders (SH25-2); starter probe kit (M3); ceramic calibration sphere Ø20 mm (with factory certificate) • Option: Gear measurement option purchased in 2021 • Condition/usage: Machine was in the quality control room for final inspection • Mounting plates: All aluminum mounting plates installed on the measuring machine Additional equipment • Workstation (PC, keyboard, mouse) • 2× HP 23" monitors (1920 × 1080) • USB dongle / Wibu-Box license • eco-fix CMM fixturing system (kits S and L) • Quick-rail base kit • J/S Box-M Type A • High-capacity CEE power cable Bsdjydm Hkjpfx Adiedc • Various buttons, 5-10 pieces (6 adapter plates)Height-adjustable desk1 tool trolley with contents3x large aluminium plates 800x40030 small aluminium plates with various fixtures. 250x250Centre clamp vice / 3-jaw chuck, etc.

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2004, Empty weight: 5.300 kg Bdsdoym Aimepfx Adisc Axle 1: left 10 mm right 10 mm Axle 2: left 8 mm right 8 mm Axle 3: left8 mm righ 8 mm We have the possibility to stack trailers!

Condition: excellent (used), Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality Mitutoyo QS250Z CNC vision measuring machine from 2017, in excellently maintained condition. Bdodpeynkbasfx Adisc This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Distance, radius, angle, and diameter determination - Measurement of bores, grooves, edges, and complex geometries - Serial measurements with automated measurement programs - Documentation and report generation via Mitutoyo software Measurement is non-contact via a high-resolution camera system with image processing. Ideal for sensitive or small parts where tactile measurement is unsuitable. Thanks to CNC control, automated measurement procedures are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): 150–200 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) - Mitutoyo QS250Z main unit - Joystick box - Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form - Manuals & documentation - Various electronic boards (see pictures) - Further accessories as shown (Technical data and information subject to change and error!) For further questions, please feel free to contact us by phone.

Condition: used, This listing is for a Mitutoyo 202TP Vision Measuring System The unit is in full working condition and is ready for immediate release The Mitutoyo 202TP Vision Measuring System is a vision measuring machine — a type of optical metrology system that uses high‑resolution imaging and software to measure the dimensions of parts without physical contact. These systems are widely used for precision inspection of components in industries like automotive, electronics, medical devices and precision engineering. Bdjdpfx Asxzgtdodioc Vision measuring systems eliminate many of the errors and limitations of manual microscope measurements by combining controlled lighting, high‑resolution cameras, automatic edge detection, and computer analysis to deliver accurate and repeatable measurements

Year of construction: 2022, condition: used, functionality: unexamined, machine/vehicle number: S352621, S352622, S352623, Deburring system consisting of: 3 robot cells, each equipped with a KUKA robot KR10 1440-2 and deburring spindles, 3 safety enclosures with loading doors (one per robot), 1 hydraulic unit for clamping systems, 3 hydraulic clamping systems. For further details on condition and technical specifications, please refer to the attached appraisal report. Bdedpfxeyqycxo Adioc

Condition: excellent (used), first registration: 10/2023, wheelbase: 7,630 mm, color: silver, Year of construction: 2023, Unladen weight: 7,490 kg Payload: 22,510 kg Gross vehicle weight: 30,000 kg Loading platform height: 110 cm APK (Technical Inspection): valid until 11/2026 Technical condition: very good Optical condition: very good A&D 2-AXLE SPECIAL SEMITRAILER FOR CRANE TRUCK 2 axles, air suspension TRIDEC steered rear axle SAF axle Chassis fully hot-dip galvanized Aluminium sideboards Bdodjylk H Ropfx Adijc Low bed height: 110 cm Neck length: 403.5 cm Loading platform length: 636.5 cm Hardwood floor, 28 mm Tyres: 265/55 R 19.5 We have 2 identical, unused semitrailers in stock.

Condition: excellent (used), first registration: 10/2023, wheelbase: 7,630 mm, color: white, Year of construction: 2023, Unladen weight: 7,490 kg Bdodpfx Asylk Hksdioc Payload: 22,510 kg Gross Vehicle Weight: 30,000 kg Loading platform height: 110 cm Technical condition: very good Visual condition: very good A&D 2-AXLE SPECIAL SEMI-TRAILER FOR CRANE TRUCK 2 axles with air suspension TRIDEC steered rear axle SAF axle Chassis fully hot-dip galvanized Aluminium side walls Lowbed height: 110 cm Neck length: 403.5 cm Loading platform length: 636.5 cm Hardwood floor: 28 mm Tyres: 265/55 R 19.5 We have 2 identical, unused semi-trailers in stock

Condition: used, functionality: unexamined, Ferwood Code: RU0011952 – Manufacturer Code: PJ-300H – Condition: Used – Functionality: Not tested – Compatible Machine: – If interested, we offer an overhaul service, please contact us. 140KG 120X80X115 Bsdeyrplrspfx Adiodc

Condition: excellent (used), functionality: fully functional, mileage: 1,035,000 km, power: 426.59 kW (580.00 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, spoiler, MAN TGX 18.580 D 38 Full-Air - First registration: 03/2019 - Mileage: 1,035,000 km - Retarder: Intarder - ADR AT - Stationary air conditioning - Navigation system - LED headlights - Double fuel tank - Double bunk - Tyres: 50% CUSTOMIZED FINANCING OR LEASING SOLUTIONS AVAILABLE ON SITE. FROM 24 UP TO 96 MONTHLY INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OUR GROUP’S OTHER LOCATIONS: DOMENICO TRUCK SRL, NAPLES LOCATION DOMENICO ESPOSITO S.P.A., EBOLI (SA) LOCATION – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30-19:00 / SATURDAY 8:30-14:00 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – DAF – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – MAN - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer – Refrigerated semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Fixed platform – Crane – Tipper – 4 axle – 4 rear axle – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtainsider – Box – Tail-lift – Refrigerated cell – Insulated with fridge – Van Bodpfxewgy H Rj Adisdc Domenico Truck srl declines all liability for any discrepancies in technical specifications, optional equipment and features which may occasionally differ from those shown in the description. We invite you to verify the features of the specific vehicle.

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2006, Empty weight: 4.770 kg Bedpfxeyiuavo Adisdc Axle 1: left 10 mm right 10 mm Axle 2: left 8 mm right 8 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!