Used Mori Seiki Nmv 5000 Dcg Turning Table for sale (24,613)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Bjdpfezcuyisx Af Dswr Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Year of construction: 2000, condition: as good as new (ex-display), The following spare parts are available from a MORI SEIKI VL250, year of manufacture 2000: 1. Turret (not complete) Ball screw with nut, X and Z axis Bodpjcbinnjfx Af Dewr X and Z axis guide parts are from a new machine Motor, X-axis See photos.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, total height: 2,770 mm, table load: 500 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details. • Table: 900 × 500 mm; 4 T-slots (18 mm width × 100 mm pitch) • Number of axes: 4 (X, Y, Z + 4th rotary axis; 4th axis supplied by accessory listed below) • Distance spindle nose to table: 150–610 mm • Spindle: max; 22 / 18.5 kW motor; 85 mm front bearing ID • Tool magazine: max tool Ø 80 mm (adjacent) / 125 mm (non-adjacent); max tool length 300 mm; chip-to-chip 3.2 s • Feedrates: Rapid X/Y/Z 32,000 mm/min; max working feed 16,000 mm/min • Axis motor power: X/Y 2.1 kW; Z 4.4 kW • CNC control: MORI-FANUC MSC-501 (compatible with MSC-518); memory 320 m; functions include helical interpolation and cutting force control (Power Monitor) • Coolant system: 50 bar high-pressure through-spindle coolant (TSC) • Features: air blow for part cleaning, full enclosure, end-of-cycle lamp, RS-232 interface • Floor space: 2,200 × 2,550 mm • Electrical: total installed power 50.2 kVA; 380 V, 50 Hz Additional equipment • 4th axis attachment: Tsudakoma RN-150R rotary table with 200 mm faceplate and tailstock • Chip management: 2× rear-discharge chip conveyors Bodpfxey Uxige Af Dswr Technical Specification Taper Size BT 40

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 YEAR 1997 Bwsdpfxev N D Rtj Af Djr CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm MAX. SPINDLE SPEED 9-2500 rpm TURRET 12 STATIONS TAILSTOCK YES SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS CLEAN

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm Bwjdett Da Iopfx Af Der MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS Bwedpfx Aotvau Hjf Dor RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: excellent (used), Year of construction: 2013, CNC Control: M730BM X mm: 1,050 Y mm: 530 Z mm: 510 Worktable dimensions mm: 1,350 x 600 Table load capacity kg: 1,200 Distance spindle nose to table mm: - Cutting feed mm/min X,Y,Z: - Max. rapid traverse m/min X, Y, Z: 30,30,30 Spindle speed rpm: 12,000 Spindle power HP: - Taper type: BT-40 Torque Nm: - Tool changer type: - Tool changer positions: 30 Max. tool diameter mm: 80 Max. tool diameter with adjacent positions empty: 150 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: - Through-spindle coolant bar: - EQUIPMENT Bwsdpeymxbfsfx Af Der Chip conveyor Work light Electronic handwheel BT-40 taper

Condition: used, Year of construction: 1998, x-travel 1.020 mm y-travel 510 mm z-travel 510 mm control MSC 501 Fanuc table surface area (APC) 1.200 x 480 mm Bsdpfx Afey Apcyo Djwr max. table load (APC) 550 kg turning speed range - milling 10.000 U/min power capacity - milling spindle 22 / 18,5 kW tool taper BT 40 number of toolpositions 30 pos. tool taper BT 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse 32 m/min feed 1 ~ 16.000 mm/min Tipp feed 0 ~ 1.260 mm/min spindle bearing diameter 85 mm total power requirement 59,5 kVA weight of the machine ca. 6,9 t dimensions of the machine ca. 3,9 x 2,7 x 2,9 m CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT included in the scope of delivery

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg Bwodpfx Afjx R Enbs Der T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter Bedpjv E R E Nefx Af Djwr MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm Bwedpfjvzhiqex Af Dor centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm Bodpfx Astqmqwsf Dewr axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 Bsdpfxev E R E As Af Dswr power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: good (used), Year of construction: 2021, functionality: fully functional, Machine has 920 spindle hours. Mori Seiki NLX 2000 turning/milling center, year of manufacture 2021, Celos 730 UM / Mapps control system, Bsdoy Ti Uwjpfx Af Dewr X/Z travel 260 / 590 mm, Y-axis +/- 50 mm, bar diameter up to 65 mm, main spindle with C-axis, spindle speed up to 5,000 rpm, 12-station BMT turret, driven tools, NC steady rest, tailstock, tailstock spindle speed up to 6,000 rpm, chip conveyor, high-pressure cooling system, oil mist separator, manually adjustable tool pre-setter, swiveling inside the machine, part catcher for main and tailstock spindles, Irco short bar loader ILS, gear hobbing, gear skiving.

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Bsdpfeyxpprsx Af Djwr Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Bwodpfeza D Iwox Af Der Tailstock Machine manuals External reference: 603

Condition: used, Year of construction: 2003, turning diameter 430 mm turning length 519-525 mm Bodpfxey Sblxs Af Djwr control Mori seiki MSX-805 x-axis 230 mm z-axis 520 mm weight of the machine ca. 4100 kg

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Bjdpfx Afey Spuue Djwr Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: used, Year of construction: 1990, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Under offer is a complete CNC tool shop, whioch will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" Bodpfxey S T T Us Af Dowr *

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main Spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Bwjdpfx Asy R U Ecsf Der Pallet Changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-Axis Switching time 90°: 2.5 sec Pallet changeover time: 6.0 sec Tool Changer Number of tool positions: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent magazine slots free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS CNC control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Footprint approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling device High-pressure coolant system Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: Shaft for loading must be provided by the buyer.

Condition: like new (used), Year of construction: 2010, operating hours: 76,482 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Bedpfx Afjy Rpq Ts Djwr Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Bedpfjy Nyzgjx Af Dewr Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1764, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Bjdpfx Aey Sluqjf Djwr Control: Fanuc EQUIPMENT Accessories as shown in the pictures

Condition: excellent (used), Year of construction: 2005, Twin pallet 400 x 400mm, X 560 Y 560 Z 630mm, B 0,001dg. 14.000Rpm BT 40, ATC 60 pos, cooling through spindle, MSX 501, weight 9,800kg Bjdpfxjy R Aure Af Dswr

Condition: used, Year of construction: 1988, turning diameter ca. 570 mm turning length ca. 530-610 mm control FANUC ohne Gewähr x-travel ca 160-200 mm y-travel ca. 560 mm weight of the machine ca. 4,5 - 5 t ca 10 oder 12 spindle bore 52-76 mm weight of the machine ca. 4 t Bsdsyiu Tpepfx Af Djwr