Used Robland Spindle Moulder Robland T 120 Tp for sale (82,193)

Condition: excellent (used), Year of construction: 1994, Tilting Spindle Moulder Manufacturer: Martin Model: T25 Year of manufacture: 1994 Tilting range: -5° to +45° Height and angle adjustment: Electric Spindle diameter: 2 spindles, 30 mm / 40 mm Power: 5/6 kW Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 1,500 kg Rsdpfjyvrnrjx Ammju

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Rodpfx Aok S Dt Tsmmju Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 5-SPINDLE MOULDER WEINIG MOD. UNIMAT 500- USED Redpfxjywflys Ammou - Composition: 1st lower horizontal spindle 2nd right vert. 3rd left vert. 4th upper horizontal spindle 5th lower horizontal spindle - Complete with MEMORY SYSTEM - Width 230 mm - PTO drive - Short workpiece device - Ribbed table - Year 2002 - CE standards

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES - 1. Horizontal bottom 11 kw - 2. Vertical right 7.5 kw - 3. Vertical left 7.5 kw - 4. Horizontal top 11 kw - 5. Horizontal top 7.5 kw - 6. Horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012 Rsdpfxsywfkvj Ammsu

Condition: used, Year of construction: 1994, Used, excellent condition, top specification, extensive accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 change spindles, adjustable table insert Manufacturer: SCM Model: T150 Class Year of manufacture: 1994 Upgraded motor: 6 / 7.5 kW tilt range from -10° to +45° motor brake motor with 2 speeds, pole-changeable speed settings: 3250/5000/6500/10,000 rpm right and left rotation Table size: 2700 x 700 mm Milling spindle diameter: 15 x 30 mm / 1 x 40 mm Milling spindle clamping: HSK Quick-change spindle system: SK / HSK Table extension: 2 x 650 mm Extendable frame support Rjdpfx Amsythdvomou Aluminium fence jaws Milling fence with fine adjustment Digital displays for milling fence – diameter – depth of cut – jaw offset Guard and pressure device Top control panel Swiveling control panel - electric height adjustment - electric tilt adjustment - electric milling fence Positioning control for 3 axes: height/tilt/milling fence with 99 programs Digital displays for tilt angle – spindle height – fence depth Swivel-away fence device Socket for feed unit Original price approx. 40,000 – 45,000 EUR Extraction connection 120 x 120 mm Space requirement approx. 2700 x 1300 x 1800 mm Weight approx. 1073 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in the current condition as inspected, function tested, without overhaul, without warranty or guarantee.

Condition: good (used), Year of construction: 1994, Table dimensions 1100 x 750 mm Motor output 5 kW Spindle diameter 30 mm Rjdpfx Aeyf N E Eemmju reus 2900/4400/6000/8000 U/min Weight 500 kg

Condition: new, functionality: fully functional, power: 275 kW (373.90 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH JS-1 mobile jaw and impact crusher is a high-efficiency mobile crushing and screening plant designed for processing natural stones such as medium-hard limestone, dolomite, and river stone. The JS-1 is manufactured with advanced engineering expertise and offers maximum efficiency even in challenging site conditions thanks to its durable components, high-performance crushers, and compact design. The system's first chassis features a CJC-60 primary jaw crusher, a vibrating feed hopper, a bypass belt, and a wheeled mobile chassis with hydraulic legs. The second chassis houses a CSI 1210 secondary impact crusher, a three-deck vibrating screen, a return belt, foldable stockpile belts, and a dust suppression system. Thanks to the powerful impact crusher design of the JS-1, the final products have an excellent cubic shape, providing ideal aggregate quality, especially for concrete production. The plant's production capacity varies between 60 and 80 tons per hour, depending on the hardness of the rock. Thanks to its user-friendly automation system, SIEMENS – SCHNEIDER brand components, and PLC control, the plant can be fully automatically managed via a tablet. Installation is completed in a short time, and the need for external equipment is minimized thanks to hydraulic opening mechanisms. The JS-1 can be easily transported with a single tractor due to its dimensions suitable for international road transport. JS-1 - Mobile Jaw and Impact Crusher Technical Specifications Production Capacity: 60-80 tph Maximum Feed Size: 600 x 380 mm Feed Height: 4.5 meters Main Configuration: Jaw Crusher + Secondary Impact Crusher + Vibrating Screen Total Motor Power: 275 kW Electric Generator Requirement: 550 kVA Plant Weight: 60 tons (total of two chassis) Plant Dimensions: 1st chassis 11x3x4.4 m / 2nd chassis 3.35x4.3x17.8 m Chassis Type: Double Chassis Why Choose the JS-1 Mobile Crushing and Screening Plant? CONSTMACH JS-1 is an excellent choice for professionals seeking maximum efficiency, minimum operating costs, and superior product quality in the rock crushing process. Its fully automatic control system, high mobility capability, and durable construction offer uninterrupted production for many years. Furthermore, CONSTMACH's engineering expertise, after-sales technical support, and spare parts supply guarantee ensure the continuity of your business. If you are looking for quality, performance, and reliability in stone crushing solutions, experience the difference with the JS-1 Mobile Jaw and Impact Crusher, backed by CONSTMACH quality. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Rjdpjxqf Thsfx Ammsu

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1750x1300x1150 mm Rjdpev A Hh Uofx Ammju Weight 600 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Redpfxov A Hh Io Ammsu Weight 530 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Weight 530 kg Total power requirement 5,5 kw Rodpfx Amov A Hirsmju

Condition: good (used), Used Kölle tilting spindle milling machine Model F 45 Table size 1070 x 1000 mm Table height 850 mm Motor 5.5 HP / 400 V Right/left rotation Speed 2800/4500/6000/10000 rpm Spindle Ø 30 + 40 mm, Spindle stroke 110 mm Electric height and tilt adjustment Swivel range -5 to +45 degrees Electric motor brake Aigner integral stop 650/650 mm Milling stop rotatable 360° Weight approx. 1050 kg Redpfsv N Dcpox Ammou

Condition: used, Year of construction: 1980, Spindle swivels: No Rjdok Eakcopfx Ammeu Sliding carriage: Yes Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual Height indication: Scala Swivel angle display: - Milling stop display: Scala Milling spindle diameter: 40 mm Speeds: 3000, 4500, 6000, 9000 motor power: 5 kW Motor brake: Yes automatic Suction connection: 2 x 120mm Machine length: 1200mm Machine depth: 900mm Weight: 600kg

Condition: not inspected (used), functionality: unexamined, Year of construction: 2008, controller model: HMI PLC KAESER, pressure (max.): 8.5 bar, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Maximum operating pressure: 8.5 bar Air dryer Model: ABT 102 Max. operating pressure: 21 bar MACHINE DETAILS Redpfxeyq Hi Eo Ammju Control model: HMI PLC KAESER Motor power: 55 kW Voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7549

Condition: good (used), I sell the heavy duty fourside moulder SK MACHINERY 907S. Element max. 240x150mm ! Redpfx Amopwdwbjmeu 7 spindle configuration: Bottom 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Left 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Top 7,5kW (10HP) / 6000 rpm Top 12kW (15HP) / 6000 rpm Bottom 5,5kW (7,5HP) / 6000 rpm Total power 62KW / 102 A Total weight 5000kg. Element max. 240x150mm ! Moulding heads with spiral knives fi.140x260x40mm included in price. Electronic programmer for the working width and height adjustment of the pressure zone and top spinde, aka working height. Feeding speed adjustable by inverter. Zone pneumatic pressure system for feeding wheels. Available immediately Repair required: Bearings on one spindle which is already outside.

Condition: excellent (used), Felder F 700 Z Spindle Moulder 205 cm sliding table integrated in the worktop, Redpfx Aeyn Iu Rommsu Spindle adjustable in height and tiltable 0-45 degrees, Interchangeable 30 mm spindle, 7.3 kW motor, electric brake, Forward and reverse rotation, 4 spindle speeds, Very good condition, fully ready for operation.

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Redpfowtft Nsx Ammsu Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Rjdpfsurwy Nex Ammsu

Condition: used, Technical data: Spindle diameter: 35 mm Spindle height: 160 mm Speeds: 3200/4200/6000/8000 Manual spindle height adjustment Spindle lock Tenoning table Adjustable fence arms Motor power: 3 kW Power supply: 380 V Equipped with 3-roller feed unit Feed speed: 3.5|7.5|10|21 m/min Redpfx Ajymxw Tjmmeu Additional spindle guards – 2 pcs Overall dimensions: Length: 2200 mm Width: 1400 mm Height: 1700 mm

Condition: good (used), Year of construction: 1998, functionality: not functional, machine/vehicle number: 88208, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 220 mm, working height: 120 mm, total width: 220 mm, total height: 120 mm, spindle speed (min.): 6,000 rpm, extraction nozzle diameter: 150 mm, planer shaft diameter: 40 mm, input current: 400 A, table width: 230 mm, blade shaft diameter: 40 mm, Equipment: motor brake, Weinig Unimat 23 EL Planing & Moulding Machine with 9 Spindles, No: 88210 Year 1998 In good condition, with safety enclosure and Accoustic Sound & Safety Booth. Good HP, B11, R11, L11, R11, L11, T11, B22(Rip Saw Head) T11, B11 all kw. Rjdpox Elagjfx Ammeu 2m. Infeed Table. Pneumatic Pressure to Feed Rollers. Wax Pump. Feed Speed from 6-36m/min. Some Planing Heads are on the machine. With full documentation. Can be viewed at The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Photos available on WhatsApp.

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Rodpjyfxa Esfx Ammsu

Condition: new, New -RUWI Tischfräse Classic- Save working time with tools that can be called up: set up oncethe drive unit is always put back on with a flick of the wristpreset position- Mobile and flexible use in industry and trade: chamfers, grooves,flush milling- Supplement to the table and CNC milling machine- Quality and efficiency thanks to a durable, high-performance motorTechnical specifications:Function: router / under routerTable length: 640 mmTable width: 500 mmTable height: 910 mmDrive units: 3Power consumption: 1050 wattsVoltage: 230 voltsSpeed: 8000 - 25000 rpm steplessMobility: 4 swivel castersCollets: Standard ø8mm, optional ø6mm / ø6.35mm / ø10mmMilling stroke: 43 mmDust extraction connection: 120mmTools on demand: 3Tool height repeatable: YESRetrofittable drive units: No (up to 5 pieces for RUWI spindle moulder L)Weight: 91kg– Completely pre-assembled RUWI spindle moulder M with 3 drive units– Tool concealment– Removable suction tunnel with suction socket ø 120 mm- Operation manualNo. 10002 Redpovwf Shjfx Ammsu

Condition: used, Year of construction: 1991, cleaned, function checked, test runRunout: 3/100 mmwith glazing bead cutting sawwith feed deviceused, good conditionMake GuillietType QFPYear of construction 1991Machine no. ROM 8102 V 11889 kW motor reinforcedincl. feed with 4 rollersSpeed levels 3 / 4.5 / 6/8000Milling arbor diameter 50 mmClamping height 270 mmStorage location from locationDelivery in the current condition as seenTechnically tested, without acked.- free on truck - Rjdpfx Amjvwf Sbsmsu

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Rodpfevwf Ucjx Ammju

Condition: new, - new-manufactured by Ruwitype Classic- Save working time with tools that can be called up: Set up oncethe drive unit can be reset to the preset position with a flick of the wristplaced- Mobile and flexible use in industry and trade: chamfers, grooves,flush milling- Supplement to the table and CNC milling machine- Quality and efficiency thanks to a durable, high-performance motorTechnical specifications:Function: router / under routerTable length: 640 mmTable width: 500 mmTable height: 910 mmDrive units: 3Power consumption: 1050 wattsVoltage: 230 voltsSpeed: 8000 - 25000 rpm steplessMobility: 4 swivel castersCollets: Standard ø8mm, optional ø6mm / ø6.35mm / ø10mmMilling stroke: 43 mmDust extraction connection: 120mmTools on demand: 3Tool height repeatable: YESRetrofittable drive units: No (up to 5 pieces for RUWI spindle moulder L)Weight: 91kgwith:1 Ruwi unit fine adjustment No. 104501 Ruwi fence for table router Classic No. 10150 Redpfx Amsvwf Sujmeu

Condition: used, used Manufacturer: Schneider Rjdpfxjw Dgbis Ammou Model: SK 1/2 Machine number: 10144 GS-tested Motor: 5.5 kW Tiltable from -5° to +45° Motor brake Motor with 2 speeds / pole-changeable 6 speed settings: 4000/5000/6000/8000/10000/12000 rpm Right and left rotation Table size: 1150 mm x 850 mm Spindle diameter: 30 mm Spindle fence with fine adjustment Control panel Extraction port D 100 / 120 mm Required space approx. 1600 mm x 1200 mm x 1500 mm Weight approx. 1000 kg Total connected load 5.5 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition No guarantee or warranty