Used Schelling Cutting Lines for sale (21,983)

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Hedpfx Abotiy Nto Tst Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, working width: 22 mm, cutting force: 183 t, working length: 500 mm, TECHNICAL DETAILS Shearing force: 1,800 kN Hedjyyb Hrspfx Ab Tjt Flat material capacity: 500 x 22 mm Square profile capacity: 150 x 150 x 15 mm EQUIPMENT Counter Numbering system

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Hodpoyufixofx Ab Tst Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; Hodowd E N Espfx Ab Tst 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: new, Year of construction: 2025, Max. cutting section mm. 610x30 / 520x100 / 420x150 Structure completely in painted steel of large thickness and reinforced. Solid anchoring system to the ground with flanged steel feet for the hole. Two-hand safety cutting controls in ergonomic position. Independent pneumatic adjustments to adapt to the different types of processing. Progressive starter compressed air in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. Cutting time adjustable from 0.5 to 2 sec. Cutting speed adjustable via pneumatic regulator on the control panel. CUTTING UNIT: Cutting unit with extremely robust horizontal plane, equipped with galvanized idle rollers with capacity 600 kg, diameter 89 mm, width 500 mm. Tilting cutting movement with power transmission via a group of belts. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. End-of-stroke shock absorbers. Swing with bearings. Motor anchoring with easy adjustment for perfect 90-degree cuts. Easy maintenance with easy access. Blade motor power HP = 14.8 (11 kW). HM circular blade, diameter mm. 600. Cutting edges Z = 108. Hole diameter mm. 35 Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on the control panel. Intelligent presser: Automatic adaptation to the thickness of the wood, thus significantly reducing cutting times Hedpowk Iphsfx Ab Tot Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on the control panel, to adapt to the different types of work to be performed.

Condition: new, Year of construction: 2025, COST CUTTING OPTIMIZER Superangle 600 is the ideal cutting center for angular and optimized cuts. A direct technological evolution of traditional cutting methods, Superangle 600 is able to increase productivity, guarantee maximum precision and maintain a simple and flexible process logic. EXTREMELY ROBUST Structure completely in thick and reinforced painted steel. Pusher support carriage mm. 300x345x25. Toothed belt width 50 mm. with 33 internal steel inserts. TECHNOLOGICALLY INNOVATIVE Electronic system consisting of a computer connected in real time to a latest-generation numerical control. Software in Windows environment. Complete with management of 5 qualities. 22” LED color video. Tele-service via internet. + Macro Excel. Hsdpfxswk E Uuo Ab Tst FAST Total optic system. Brushless electronic movement motor servo driver. Brushless electronic movement motor servo driver for angular cutting movement. Adjustable cutting speed. Two aligners. RELIABLE AND SAFE Transmission system with sliding on double tempered and ground guides. “Skf” ball bearing slides with double dust protection and automatic lubrication. Self-supporting electrical panel separated from the machine. Independent pneumatic adjustments to adapt to different types of processing. Maximum safety protection lock on the rear side.

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear Hedpfxjtvdy Ij Ab Tet 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm Hjdpfx Aohzbipsb Tot - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, machine/vehicle number: 008208, Position 1: Front-Loading Panel Saws HOLZMA-HPP 510/43/43 + HEE 33/22 Position 2: Lift Table HOLZMA-HPP 510/43/43 + HEE 33/22 Hsdox A Thkjpfx Ab Tjt

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Hsdpfx Ajwuzzrjb Tjt Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: new, Year of construction: 2025, Max. cutting section mm. 280x95 / 240x125 / 340x15. Structure entirely in thick and reinforced painted steel. Solid ground anchoring system with flanged steel feet for the hole. Ergonomic two-hand safety cutting controls. Independent pneumatic adjustments to adapt to different types of work. Compressed air progressive starter in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. CUTTING UNIT: Cutting unit with horizontal plane. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. Shock absorbers at the end of the stroke. Swing with bearings. Motor anchoring with easy adjustment for perfect 90 degree cuts. Easy maintenance with easy access. Solid ground anchoring system with adjustable steel feet with perforated flange. Blade motor power HP=7.5 (5.5 kW). HM circular blade, diameter mm. 500. Cutting edges Z=108. Hole diameter mm. 35 Hsdpewk Himsfx Ab Tst Adjustable cutting time from 0.5 to 2 sec. Adjustable cutting speed via pneumatic regulator on control panel. Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on control panel. Intelligent presser: Automatic adaptation to wood thickness, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on control panel, to adapt to the different types of work to be performed.

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 241.371, functionality: fully functional, operating hours: 4,700 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 46 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 5,800 mm, saw blade diameter: 350 mm, saw blade bore: 30 mm, total length: 7,300 mm, total width: 7,600 mm, table height: 970 mm, year of last overhaul: 2025, plate length: 7,300 mm, platform width: 5,800 mm, Equipment: CE marking, documentation/manual, scorer, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction capacity: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length for saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Saw blade projection above table (U): max. 95 mm Maximum clamp opening (K): 90 mm Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm Minimum alignment force of strip aligner: 400 N / unit Maximum alignment force of strip aligner: 2000 N / unit Working height, longitudinal saw: 970 mm Overall height: 2070 mm Hjdpfx Abjytfxwo Tst Main saw motor power: 15 kW Saw unit feed speed, forward: 5 to 120 m/min Saw unit feed speed, return: 120 m/min Return feed speed – longitudinal saw: up to 80 m/min

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Hsdpfx Abelwtzyo Tst Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m 6 ejection stations total length 12 m Hsdpfx Aol H E Taob Tot The infeed belt is not running at the moment, probably because of the frequency converter.

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm Hodpfx Abogrug Rj Tot speed: approx. 60 m/min

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm Hjdpsgnyglefx Ab Tjt strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min

Condition: new, Year of construction: 2026, New slitting and cut-to-length with compact size decoiler. Machine modules: ✔ Decoiler up to 6000kg ✔ Side guides ✔ 5 roller straightener ✔ 5 slitter knives ✔ Polyurethane feed rollers ✔ Mechanical guillotine ✔ 7" Touch panel Machine parameters: • Dimensions L/W/H. - 3.3/1.5/1.2 m, weight 1700 kg • Sheet thickness (cut-to-length) : 0.5-1.2 mm • Sheet thickness (slitting): 0.5-0.8 mm • Max. coil weight: 6000kg • Coil width : 500-1275 mm • Inner coil diameter: 460-520 mm • Steel, galvanized steel and coated steel up to 400N/mm2 Hsdpfolgy Uhsx Ab Tst • Accuracy : 1mm/2000mm • Power : 3.2 kW Optional: ◦ Additional decoiler ◦ additional slitter knives and guillotine knives ◦ Automaticaly adjustable straightener ◦ Automaticaly adjustable slitter

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Hodotk It Sspfx Ab Tot Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, Year of construction: 2013, Colour: Grey Weight: 2.000 kg - Details: - └ Description: Machine is currently not working, possible problem with software - Year: 2013 - Documentation available: No - CE marking present: Yes Hjdpfeyvf Epox Ab Tst - CE certificate present: No - Serial number: 4919 - Min. saw blade diameter[mm]: 440 - Max. saw blade diameter [mm]: 450 - Input table length [mm]: 4700 - Output table length [mm]: 2000 - Options: Automatic pusher system - Feed speed: Automatic - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 20 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Hjdpfx Ajzw Tzasb Tot Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: used, machine/vehicle number: 007816, Position 1: Automated Warehouse BIESSE-SELCO SK 450 Hjdpfxowuufqo Ab Tjt Position 2: Beam panel saws with automatic warehouse BIESSE-SELCO SK 450

Condition: good (used), Perfecta 92 Paper Cutting Guillotine The machine is in very good condition, serviced and ready to use. Technical Specifications: Cutting width: 920mm Stack height: 120mm Minimum scrap: 18mm Weight: 2300kg Power supply: 400V Equipment: – Brand new programmer and complete control system – New photocells – Air table – Hydraulic clamp with variable force adjustment – Side tables – Tool kit – Spare blade Hedpfezw Tx Sjx Ab Tst

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Hedpox A Tbwefx Ab Tst Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: used, empty load weight: 7,540 kg, maximum load weight: 14,460 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2001, loading space length: 10,450 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, aluminum rims, 1 axle, BPW axles, air suspension, forced steering, lashing eyes, supports, crane behind the house, emergency stop, foldable, 2-point hydraulic support, 3x hydraulic extensions, 1x mechanical extension. Hsdpfxji Rq I Ns Ab Tot Superstructure: Crane Ferrari 7m/t, Honda GX 630 separate engine for crane hydraulics, crane, 2.66m = 2.35t, 11.29m = 0.47t. Crane: 2.66m = 2.35t, 4.19m = 1.545t, 5.89m = 1.015t, 7.69m = 0.73t, 9.49m = 0.57t, 11.29m = 0.47t, (mechanically possible for an extra charge, 13.25m = 0.34t), drum brakes, center and corner outriggers foldable, 2,000 crane operating hours. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Hodpswuz Dgofx Ab Tet Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507