Used Single Head Cutting-Off Machine for sale (77,370)

Condition: used, Year of construction: 2016, functionality: fully functional, Y accuracy max. 0.068 mm Automatic camera edge control with 0.1 mm accuracy Bedey Ip T Nepfx Ad Aslg Speed up to 18 m/min Maximum cutting width 170 cm Includes compressor and computer Accessories: various guide rollers

Condition: used, functionality: fully functional, Year of construction: 2017, Power 1.8 kW Voltage 230 / 115 V Frequency 15 / 60 Hz Bjdpfx Adjy Ip Tij Aelg with TRUMPF TRUMARK 3000 marking unit

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Blodpfx Adou Tg Sps Aeg Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 Bsdewhk E Hspfx Ad Aslg 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, CNC Plasma Cutting System 6000x3000 mm – EPL 3060 ERMAKSAN 5 AXES – Hypertherm XPR300 with OPTIMIX – Bevel Unit YEAR OF MANUFACTURE: 2024 Bodpoy Ipb Tefx Ad Ajlg The machine was newly sold at the end of 2024 and is being offered for sale due to the company’s insolvency. The photos in the listing were taken during the commissioning phase; current photos will be provided at a later date. CNC Plasma Cutting System • Machine type: CNC plasma cutting table • Condition: Used – in good operating condition • Availability: Immediately available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and fast cutting of mild steel, stainless steel, and aluminum. Features • Bevel unit: BEVEL-R (5-axis bevel cutting system) for weld seam preparation and bevel cuts Extraction System • Sturdy, industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Blsdpfx Ajvfxw Hjd Aog Equipment: cutting thickness 40 mm

Condition: used, Format: 0x0 Equipment: Bledsyf Ih Sopfx Ad Ajg With hot glue machine

Condition: used, Year of construction: 1992, Elcos 2 head drilling machine is a machine manufactured by Elcos in 1992, with a format of 45 x 150 mm. Currently stored in Germany, it features a drill distance of 45 - 150 mm, space behind the drill heads of 100 mm, and is a double head paper driller. It operates with a lever and is single phase 240 volts. The delivery terms are FCA. Format: 45 x 150 mm Equipment: Double head paper driller Bjdpfx Adswvuubj Aslg Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) Bsdpfsyazywox Ad Aolg - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Condition: like new (used), Year of construction: 2018, functionality: fully functional, We are offering this Lectra Vector Fashion iQ50 textile cutting machine in like-new condition, year of manufacture 2018. Manufacturer: Lectra Model: Vector Fashion iQ50 Year of manufacture: 2018 Condition: like new Type: textile cutting machine If you have any questions or need further information, please feel free to send us a message or call us. Bjdsy Hpi Ispfx Ad Aolg

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Blsdpfxoyui Ekj Ad Aeg Supply frequency: 50 Hz Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium TRUMPF 3D laser cutting system, fully maintained and immediately ready for production. Ideally suited for applications in the automotive and aerospace sectors, as well as general metalworking, this machine is perfect for precision 3D contour cutting of tubes, hydroformed components, and complex profiles. Machine Overview Model: TRUMPF TruLaser Cell 8030 Year of Manufacture: 2015 Laser Source: 3,000 W TRUMPF (CO₂ / solid-state – to be verified upon inspection) Operating Hours: 70,000 h total / 41,125 h laser-on time Condition: Fully functional, currently in serial production Service History: Regular annual maintenance exclusively by TRUMPF – full service documentation available Key Benefits • 5-axis CNC for high-precision, demanding 3D geometries • Fully enclosed, automation-ready working area • Proven reliability for both high-mix/low-volume and medium series production • Genuine TRUMPF quality – Made in Germany • Continuous OEM service record – no third-party interventions What Sets Us Apart: Modular Handover, More Than Just a Machine Sale We are not equipment brokers but actively operate a laser job shop (SOERMEL Groupe, France – 65 employees, €12M annual turnover, IATF 16949 / EN 9100 / ISO 9001 certified). Our buyers profit from our application expertise through four tailored service modules – select the support level that best matches your project: Modular Service Packages M1 – Ex Works Machine handover at our site, loaded onto your transport vehicle. Comprehensive testing prior to delivery. Ideal for buyers with their own rigging and installation capabilities. M2 – Delivered M1 plus international freight, insurance, and unloading at your premises (DAP/DDP terms available upon request). For customers with in-house installation teams. Bljdsukhltjpfx Ad Aog M3 – Delivered & Installed M2 plus mechanical installation, utility connections, initial commissioning, and laser calibration. For buyers without dedicated installation resources. M4 – Turnkey Solution M3 plus full commissioning, process validation on your components, operator and maintenance staff training, and acceptance protocol. For those who want the system up and running from day one. Pre-purchase on-site inspection and sample processing of your test parts is welcome at our facility in France.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium TRUMPF 3D laser cutting system, fully maintained and immediately ready for production. Ideally suited for applications in the automotive and aerospace sectors, as well as general metalworking, this machine is perfect for precision 3D contour cutting of tubes, hydroformed components, and complex profiles. Machine Overview Model: TRUMPF TruLaser Cell 8030 Year of Manufacture: 2015 Laser Source: 3,000 W TRUMPF (CO₂ / solid-state – to be verified upon inspection) Operating Hours: 70,000 h total / 41,125 h laser-on time Condition: Fully functional, currently in serial production Service History: Regular annual maintenance exclusively by TRUMPF – full service documentation available Key Benefits • 5-axis CNC for high-precision, demanding 3D geometries • Fully enclosed, automation-ready working area • Proven reliability for both high-mix/low-volume and medium series production • Genuine TRUMPF quality – Made in Germany • Continuous OEM service record – no third-party interventions What Sets Us Apart: Modular Handover, More Than Just a Machine Sale We are not equipment brokers but actively operate a laser job shop (SOERMEL Groupe, France – 65 employees, €12M annual turnover, IATF 16949 / EN 9100 / ISO 9001 certified). Our buyers profit from our application expertise through four tailored service modules – select the support level that best matches your project: Modular Service Packages Bjdoy E Iv Rspfx Ad Ajlg M1 – Ex Works Machine handover at our site, loaded onto your transport vehicle. Comprehensive testing prior to delivery. Ideal for buyers with their own rigging and installation capabilities. M2 – Delivered M1 plus international freight, insurance, and unloading at your premises (DAP/DDP terms available upon request). For customers with in-house installation teams. M3 – Delivered & Installed M2 plus mechanical installation, utility connections, initial commissioning, and laser calibration. For buyers without dedicated installation resources. M4 – Turnkey Solution M3 plus full commissioning, process validation on your components, operator and maintenance staff training, and acceptance protocol. For those who want the system up and running from day one. Pre-purchase on-site inspection and sample processing of your test parts is welcome at our facility in France.

Condition: used, Punching machine for, e.g., slipcases with many punching dies Bjdoxw N Ntopfx Ad Aslg

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during Bljdpfx Adev T True Aog work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II Bsdoym Unzspfx Ad Aolg - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Bsdpfx Aey H Hzbsd Aolg Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 20,000 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser power: 4,000 W, AMADA LC 3015 X1 NT – Laser Cutting Machine for Sale For sale: A used CO₂ laser cutting machine, manufacturer Amada, model LC 3015 X1 NT. This reliable, industrial-grade solution from the renowned Japanese manufacturer is ideal for high-precision cutting of steel, stainless steel, and aluminium sheets. General Information Year of manufacture: 2008 Operating hours: approx. 20,000 h Laser power: 4 kW Working Range and Traverse Speeds X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis stroke: 120 mm Max. rapid feed X/Y: 85 m/min Max. rapid feed Z: 60 m/min Max. workpiece weight: 730 kg Cutting Capacities Mild steel: up to 20 mm Stainless steel: up to 15 mm Aluminium: up to 12 mm Included Equipment Bjdpfsy Hxy Nex Ad Aslg - Donaldson filtration system - Sheet material storage (without shuttle table) Dimensions and Weight Approx. dimensions: 6,670 × 2,360 × 2,100 mm Total weight: 11,700 kg Why Choose This Machine? The Amada LC 3015 X1 NT is a true workhorse for sheet metal fabrication. The spacious 3 × 1.5 m working area accommodates standard sheet formats in a single setup, and the built-in sheet storage optimizes material flow and reduces manual loading efforts. The robust 4 kW laser source ensures reliable cutting of thicker materials, while the Donaldson filtration system maintains a clean working environment. Delivery and Inquiries The machine is offered as is. Further details, photos, and quotes for dismantling, transport, and potential commissioning are available upon request.

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 195 kg, type of input current: three-phase, input frequency: 50 Hz, Cake Cutting Machine KSSM V0,1D for trays 600 x 400 / 600 x 200 Bedpfxey Hwnlj Ad Aolg longitudinal cutting on top crosswise cutting underneath adjustable cutting width stainless steel construction mobile machine connection: 400V, 16A-CEE plug used machine Visit our large bakery machinery warehouse!

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 48,412 h, TRUMPF TruLaser 7040 Double-head machine Year of manufacture: 2012 Power: 2 x 3200W Operating hours: 48412 hours Bedpfsvnra Hjx Ad Aslg Machine weight: 16,000 kg Available from Q2 2025! Further information on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Included: Sheetmaster, Toolmaster Bedpfx Adsx Ifcmo Aslg TOP machine Price on request

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, TruLaser 3040 – CO2 4000W Blsdpfx Asyxc Egod Aog Laser on: approx. 25,600 hours Beam on: approx. 13,100 hours

Condition: good (used), Year of construction: 2011, functionality: fully functional, cutting width (max.): 480 mm, DGUV certified until: 01/2027, Ideal 480-95 EP Bodpoy Ifrbefx Ad Aelg - Year of manufacture: 2011 - Fully operational - Includes spare blades, cutting bars, and accessories - Immediately available

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Bjdjxfim Iopfx Ad Aslg Laser on: 42,130 h

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Blsdpfxsy Hk T Is Ad Asg