Used Spray Booth Tpw1515 1500X1500Mm for sale (2,034)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting Bljdpfx Ahszlkgcjmen 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: used, functionality: fully functional, machine/vehicle number: 34163, mileage: 19,900 km, power: 315 kW (428.28 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Bedez Hcppepfx Ahmoln Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, Frontguard Assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling with ring spring (D40), trailer hydraulics, tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with remote control, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breakers, battery master switch, pre-equipment for toll collection, pre-equipment for alcohol tester with immobilizer, air conditioning, cruise control, speed limiter, residual heat utilization, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 14.5 m³ (sludge chamber approx. 13.5 m³ / water chamber approx. 1 m³), water chamber is welded into the front of the tank with inspection opening, 2-way piston lock: water/sludge approx. 2.4 m³/13.3 m³; 4.4 m³/11.3 m³, piston with 2 piston seals and seal pressure regulation, hydraulically upward-opening full-cover lid with hydraulic latch (galvanized) and one suction connection at the bottom and top, sludge chamber level indicator with external scale with divisions of 500 l and internal float, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, discharge chute made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1300 m³/h) hydraulically driven, 4-way valve pneumatically controllable from the control panel, over-suction protection, oil separator, HD pump Pratissoli KF 32H (approx. 120 l/min at 170 bar) hydraulically driven, protection against water shortage, pressure regulation steplessly, small hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 19, 40 m are available, spray gun, suction boom hydraulically pivoting (approx. 270°) with a suction hose DN 100, at the end there is a suction pipe DN 100 with a length of approx. 3500 mm, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash tank 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED rotating beacon light at the rear, reversing camera

Condition: used, functionality: fully functional, machine/vehicle number: 33099, mileage: 79,900 km, power: 315 kW (428.28 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 16 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Bljdpfez Hatxsx Ahmon Chassis design for ADR, ADR type class EX/II including AT, weight variant 28 t, engine OM471, secondary water retarder, regulated water pump, transmission oil cooler, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, transmission lock for auxiliary drive, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: front axle/rear axle 385/65R22.5, drive axle 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, tinted windshield, sunroof, electric windows, comfort central locking system, driver comfort suspension seat, co-driver functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, multimedia radio with touch screen, Bluetooth and navigation, digital tachograph VDO, trip computer, 24 V socket in the co-driver footwell, circuit breaker, pre-wiring for toll collection system, air conditioning, cruise control, refrigerator on engine tunnel, attention assist, turning assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof beacons on cab roof, sun visor horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 16 m³ (sludge chamber approx. 15 m³ / water chamber approx. 1 m³), water chamber is welded into the front of the tank with a maintenance opening, hydraulically upward-opening full-size cover with hydraulic latch (galvanized) and a suction connection at the bottom and top, 1x piston lock, piston with 2 piston seals and seal pressure regulation, sludge chamber level indicator with external scale with graduations every 500 l and internal float, water chamber level indicator made of flexible, transparent hose, filling via a Storz "C" connection and free flow path, discharge apron made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1300 m³/h) hydraulically driven, 4-way valve pneumatically controllable from the operating station, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation stepless, small, hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, transport hose reel for suction hoses with hydraulic drive mounted on the floor flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), operating station made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED roof beacon at the rear, reversing camera

Condition: used, functionality: fully functional, machine/vehicle number: 33098, mileage: 59,900 km, power: 315 kW (428.28 HP), first registration: 08/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Bjdpoz Haruofx Ahmeln Chassis design for ADR, ADR type class EX/II including AT, weight variant 28 t, engine OM471, secondary water retarder, regulated water pump, transmission oil cooler, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, transmission lock for auxiliary drive, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), tires: front axle/rear axle 385/65R22.5, drive axle 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, tinted windshield, sunroof, electric windows, comfort central locking system, driver comfort air-suspended seat, co-driver functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 24 V socket in the co-driver footwell, circuit breaker, pre-wiring for toll collection, air conditioning, cruise control, refrigerator on engine tunnel, attention assist, turning assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Extension cylinder, total volume 15 m³, usable volume consisting of approximately 1 m³ fresh water tank and approximately 12 m³ sludge tank, tank wall thickness 6 mm, tank emptying by pushing using the extension cylinder, free discharge or by pressing with the vacuum pump, bottom flap to be opened hydraulically upwards over the entire cross-section, hydraulic latch, sealing of the closure base in NBR, lower and upper suction connection with Perrot DN 100 and with pneumatically operated sliding gate valve, sludge tank level indicator with float and external scale (graduation every 500 L), sight glass for water tank, discharge apron made of stainless steel, vacuum pump CVS RSW 1600 R (1600 m³/h) hydraulically driven, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, HD pump Pratissoli KT30 (approx. 80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulic HD hose reel with approx. 40 m HD hose DN 13 and spray gun (with swivel joint), suction hose boxes on the right and left made of stainless steel, waste container mounted on the rear left galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted on the rear right, radio remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/discharge, transport hose reel up/down, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, transport hose reel hydraulically driven, galvanized with approx. 40 m suction hose in DN 80, speed for unwinding/winding up can be adjusted steplessly, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics

Condition: ready for operation (used), functionality: fully functional, mileage: 53,200 km, power: 55 kW (74.78 HP), first registration: 03/2019, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,699 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 7,831 h, number of seats: 1, number of previous owners: 1, machine/vehicle number: SW Winter 2, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in top condition formerly a municipal/authority vehicle registered as a self-propelled working machine (40 km/h) Upon request, a major engine inspection including timing belt, water pump, oil, and filters will be carried out free of charge by us at the time of sale. 7831 total operating hours 53200 kilometers 4x4 all-wheel drive - hydrostatic all-wheel drive including Kif snow blade, type CM 1600, 1500 mm wide (like new/has never seen snow) or, alternatively, with Kif front sweeper, type CM 1600, 1300 mm wide, year of manufacture 2019 (like new/has never seen snow), not visible in the pictures. including Gmeiner salt spreader, type Husky 500V FS, with support legs (as new/used twice for testing) as new mixed bristle brush new water spray nozzles external operation of the refuse container rear-view camera and suction shaft camera sweeping width up to 2270 mm refuse container made of stainless steel wheelbase 1600 mm track width 1055 mm fresh water tank 180 liters unladen weight approx. 1900 kg Blodpfszk Ukiox Ahmen permissible total weight 3500 kg Length: 4510 mm / Width: 1210 mm / Height: 1970 mm Driving speed 0-40 km/h Working speed 0-24 km/h noise reduction package Engine: water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics, circuit 1 (front) 0–50/0–70 l/min - 225 bar, circuit 2 (rear) 0–20/25/30 l/min - 195 bar hydraulic service brake via foot pedal cabin with air-sprung comfort driver's seat air conditioning / heating water treatment system hydrant connection dosing system other applications possible through additional attachments from HAKO, such as sweepers, snowplows, and lawnmowers (not included in the scope of delivery) Errors, changes, and prior sale reserved We sell exclusively according to our terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved We are available from Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturday by appointment, outside these hours, telephone appointments are possible. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters are given priority, this applies to our entire vehicle stock. The aforementioned details are non-binding, errors/changes and prior sale reserved!

Condition: used, functionality: fully functional, machine/vehicle number: 33051, mileage: 23,900 km, power: 235 kW (319.51 HP), first registration: 02/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.6 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, reinforced clutch, MAN Tipmatic 12 12 ODr, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full brake assist, emergency brake assist EBA, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with adjustable stages, lane departure warning LDW, daytime running lights LED, heated fuel filter, trailer hitch Rockinger 400G150B (40 mm), steel bumper Cab C (2240 mm wide, 1620 mm long), air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, tinted windshield and door windows, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multifunction steering wheel, safety automatics, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 rotating beacons on the roof, pre-installation for Toll-Collect, digital tachograph CONTI, connectivity board module (RIO box), sun visor on the driver's door, sun shield horizontal tank, tank wall thickness 6 mm, total air volume approx. 11.6 m³ (sludge chamber approx. 9 m³ / water chamber approx. 1 m³), 1x piston lock, piston with 2 piston seals and seal pressure regulation, water chamber welded into the front of the tank with inspection opening, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, rear flap hydraulically opened upwards over the entire cross-section with pipe rupture protection, manual lid locking by means of toggle closures, sludge chamber level indicator with external scale with graduation every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blanking cap, stainless steel discharge chute, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the operator platform, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 60 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation stepless, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are installed, spray gun, operator platform made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights on the right and left of the tank, 1x LED rotating beacon at the rear, reversing camera. Bodpfx Ahez E Nxnsmsln

Condition: used, mileage: 114,290 km, power: 265 kW (360.30 HP), first registration: 08/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, total length: 9,550 mm, total width: 2,550 mm, total height: 3,580 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Our internal vehicle number: 1204 MAN TGS 28.360 Faun Rotopress 518 Terberg Omnideka Performance: 265 kW Emission class: Euro 6C Type: Refuse collection vehicle First registration: 08/2018 Mileage: Original. From 1st German municipal owner Bjdsz E T Tiepfx Ahmjln * Automatic transmission - D/N/R * FAUN Rotopress 518 - body * Terberg Omnideka - tipping mechanism * 265 KW / Euro 6C * Reflectors * Rear view camera * Air conditioning system * 6 seats = 2 single seats (driver / passenger) + bench seat for 4 people * Storage box in the exterior on the left side * Digital tachograph Excerpt from chassis number identification (All information without guarantee): Special equipment: Exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electric maneuvering aid, battery 225 Ah, battery disconnect switch mechanical, passenger seat comfort, air-suspended, curb mirror right electrically adjustable and heated, differential lock rear axle, digital axle load indicator for air-sprung axles, pressure sensor for air suspension bellows, ETA fuse, cab: tilting mechanism electro-hydraulic, cab: with air suspension, driver's seat comfort, air-suspended and heated, with lumbar support, remote control central locking, flame starting system, flange coupling PTO elastically loose, windshield tinted and heated, tilting lever - brake EVBec controlled, automatic climate control, steering wheel with multi-function, air compressor 2-cylinder 720 ccm, air dryer heated, auxiliary heater Eberspächer D4S, auxiliary drive flywheel side, sun visor exterior, sound system, socket cab 12V and 24V, control module for external data exchange, bumper in steel design 3-part, additional long-range / fog lights with cornering light Further equipment: Axle configuration: 6x2, approach / front mirror, trailer socket 24V / 7-pole, trailer socket ABS, anti-slip control (ASR), audio system: radio MAN basic Line (radio / CD), on-board computer MAN-Tronic, electronic braking system MAN-Brakematic, EURO 6 engine, cab: L, lower sleeper with storage space, suspension: leaf spring / air, power windows, generator 28 V 80 A, gearbox 16-speed - Type: ZF 16 S, lifting roof mechanical, body / structure: chassis, tilting lever - brake EVB, fuel filter heated, fuel tank: combination tank - 400 liters diesel + 60 liters urea solution (AdBlue), air intake raised, engine 10.5 liters - 265 kW diesel, trailing axle NO-08, liftable, spare wheel carrier behind rear axle, disc brake rear axle, disc brake front axle, side protection, rear side windows tinted, sunblind for windshield, spray mist reduction, stabilizer on a rear axle, stabilizer front axle, TGS, door windows tinted, underrun protection rear, underrun protection front, visco fan, front axle VOK-09 cranked, central locking, permissible total weight 26.0 t Note: Typographical errors excepted. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information without guarantee We reserve the right to sell the goods in the meantime We refer to our general terms and conditions.

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Blodpfx Aezpzy Ushmon Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. Travel distance X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows 10 control with new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light curtain areas, enabling pendulum operation Bodpfx Ahswwukxjmjln A total of 8 material clamps Spindle in very good condition, spindle-in-draw force: 12.5 kN Protective fence removed, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg Basic equipment: Vice with quick adjustment and adjustable guide bars Bjdpfx Aofg E H Nohmjln Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: good (used), functionality: fully functional, Double wave Preheating Spray fluxer 10 soldering frames Bsdpoz Hw Tcefx Ahmjln

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 36014, mileage: 4,990 km, power: 335 kW (455.47 HP), first registration: 06/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, front guard assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), trailer hydraulics, tires: front axle 385/55R22.5, rear axles 315/70R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with central locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breakers, battery main switch, pre-wiring for toll collection system, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Bjdpfxjz Hkkue Ahmsln Cylindrical container designed as a tipper (tipping angle min. 35°), total volume 15 m³, usable volume approx. 14 m³ sludge compartment, container wall thickness 6 mm, 4 lateral water tanks (each 450 l) made of plastic with a total water capacity of approx. 1800 l, vacuum pump CVS Vacustar 1300, hydraulically driven, transport reel hydraulically driven, with approx. 40 m suction hose in DN 80, speed for winding/unwinding adjustable, HD pump Pratissoli KT30 (80 l/min at max 175 bar) hydraulically driven, stepless pressure control, small hydraulically driven HD reel with approx. 50 m HD hose DN 13 and spray gun (with rotary joint), container discharge via free outlet or by pressing with the vacuum pump, bottom flap to be opened upwards hydraulically over the entire cross-section, hydraulic locking of the retaining lugs, sealing of the closing bottom in NBR, one bulkhead in the container, lower and upper suction port with Perrot DN 100 and with pneumatically operated slide valve, sludge compartment level indicator with float and external scale (division per 500 L), sight glass for water tanks, discharge flap made of stainless steel, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, suction hose boxes right and left made of stainless steel, waste container mounted at the rear left, galvanized, lockable tool box right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/discharge, transport reel up/down, lower suction port on/off, upper suction port on/off, engine speed +/- , emergency stop, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, total length: 1,000 mm, high-pressure hose length: 10,000 mm, total height: 950 mm, total width: 800 mm, pressure: 320 bar, fuel: regular/benzine 91, overall weight: 150 kg, fuel tank capacity: 21 l, High-pressure cleaner, 25 hp, CLENA BMK, 21 l/min, 320 bar Blsdpfxsz Hybie Ahmjn Discontinued model – available at a reduced price! Includes accessories: - 10 m high-pressure hose, DN10, with kink protection on both ends - High-pressure gun HDP350 - Double spray lance including high-pressure nozzle

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 36017, mileage: 3,990 km, power: 335 kW (455.47 HP), first registration: 08/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, Frontguard Assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), trailer hydraulics, tires: front axle 385/55R22.5, rear axles 315/70R22.5 Blsdpfez Hk Ugsx Ahmjn M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-wiring for toll collection system, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, rear view camera, 2 rotating beacons on the cab roof, sun visor horizontal tank, total volume 15 m³, useful volume approx. 14 m³ sludge compartment, tank wall thickness 6 mm, 4 side water tanks (each 450 l) made of plastic with a total of approx. 1800 l of water, vacuum pump CVS Vacustar 1300 (approx. 1,300 m³/h) hydraulically driven, transport hose reel hydraulically driven, with approx. 40 m suction hose in DN 80, speed for winding/unwinding adjustable, HD pump Pratissoli KT30 (80 l/min at max 175 bar) hydraulically driven, stepless pressure regulation, small hydraulically driven HD hose reel with approx. 50 m HD hose DN 13 and spray gun (with rotary joint), tank emptying via free discharge or by pressing with the vacuum pump, bottom flap to be opened upwards hydraulically over the entire cross-section, hydraulic latch, sealing of the closure base in NBR, one baffle in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated slide gate valve, sludge compartment level indicator with float and external scale (division of 500 l), sight glass for water tanks, discharge apron made of stainless steel, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, suction hose boxes on the right and left made of stainless steel, waste box mounted at the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel LED-illuminated and lockable, mounted at the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/pressure, transport hose reel up/down, lower suction connection open/close, upper suction connection open/close, engine speed +/- , emergency stop, 5x LED work lights (2 on each side and 1 x at the rear). 1x rotating beacon at the rear, rear view camera, trailer suction line, trailer hydraulics.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 36016, mileage: 4,990 km, power: 335 kW (455.47 HP), first registration: 07/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, emission class: euro6e, suspension: steel-air, loading space volume: 15 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Bljdpfx Ahsz Hkpdsmon Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist 6, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, Active Sideguard Assist 2, front guard assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, daytime running lights, rain sensor, light sensor, AHK Ringfeder (D40), trailer hydraulics, tires: front axle 385/55R22.5, rear axles 315/70R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air suspension seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, multi-function steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-wiring for toll collection, pre-wiring for breathalyzer with immobilizer, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor horizontal tank, total volume 15 m³, useful volume approx. 14 m³ sludge chamber, tank wall thickness 6 mm, 4 lateral water tanks (each 450 l) made of plastic with a total of approx. 1800 l water capacity, vacuum pump CVS Vacustar 1300 (approx. 1,300 m³/h) hydraulically driven, transport hose reel hydraulically driven, with approx. 40 m suction hose in DN 80, speed for winding in/out adjustable, HD pump Pratissoli KT30 (80 l/min at max. 175 bar) hydraulically driven, stepless pressure regulation, small hydraulically driven HD hose reel with approx. 50 m HD hose DN 13 and spray gun (with swivel joint), tank emptying by free outflow or by pressing with the vacuum pump, bottom flap over the entire cross-section hydraulically opening upwards, hydraulic locking of the knag, sealing of the closing bottom in NBR, one baffle plate in the tank, lower and upper suction connection with Perrot DN 100 and with pneumatically operated sliding gate valve, level indicator for sludge chamber with float and external scale (division of 500 l), sight glass for water tanks, discharge flap made of stainless steel, protection of the vacuum pump against over-suction, safety valve, combined oil separator with silencer, suction hose boxes on the right and left made of stainless steel, waste container mounted on the rear left, galvanized, lockable tool box on the right, ladder, control panel made of stainless steel, LED-illuminated and lockable, mounted on the rear right, remote control with the following functions: vacuum pump on/off, HD pump on/off, 4-way valve suction/equalization/pressure, transport hose reel in/out, lower suction connection on/off, upper suction connection on/off, engine speed +/- , emergency stop, 5x LED work lights (2 on each side and 1 at the rear). 1x rotating beacon at the rear, reversing camera, trailer suction line, trailer hydraulics.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm Bjdjupw R Ajpfx Ahmoln band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: used, saw blade diameter 400 mm capacity 90 degrees: round 110 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 200x60 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 140x60 mm total power requirement 1,5 kW weight of the machine ca. 130 t dimensions 0,8 x 0,7 x 1,3 m SPECIAL PRICE!! Bsdpfxsd Iinxe Ahmsln Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Optional saw blade

Condition: new, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum drop-side panels, foldable and removable, 3 central stake pockets for 80 x 80 stakes, removable stakes, 6 lashing eyes, outer frame with lashing points, reinforced transmission support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression at the rear, surcharge for 1,600 mm high front panel grille (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps with a load capacity of 9 tons per pair and 2 x folding supports at the rear, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more details at: ! Bsdpjz Hvfqofx Ahmjln

Condition: new, empty load weight: 3,600 kg, maximum load weight: 10,300 kg, overall weight: 13,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable to approx. 3,850 mm, locking positions at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm; loaded floor height approx. 800 mm; internal vehicle width approx. 2,530 mm; centrally, 4 stake pockets for 100 x 50 mm plug-in stakes; 8 stake pockets in the outer frame; 4 lashing rings, each rated at 5.3 t; outer frame with lashing eyes; 4 warning panels with lighting; rear plug-in rotating beacon; contour marking and side underrun protection; rear mudguards and spray suppression. -- Subject to printing errors, mistakes and changes; sample images. -- More data at: !, More Details: ! Bedpfx Ahez Hvc Ajmjln

Year of construction: 2018, operating hours: 8,580 h, condition: used, functionality: fully functional, machine/vehicle number: E21SI18102702508, This is a combination steamer, model SCC 201 WE Elektro, from the premium manufacturer Rational. The unit has been completely overhauled in our in-house workshop and is fully functional. The unit has accumulated 8,580 operating hours. The recommended retail price is €21,940.00 net / €26,108.60 gross. The offer price is €8,995 net / €10,705 gross. Service: We can gladly arrange for you to be connected with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational appliance type? Ask us – we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional – or your money back. Flexible shipping or self-pickup options. Competent advice – before and after purchase. Bjdpfx Ahez Etknsmsln Provision of operating manuals, wiring diagrams, and spare parts. Inspection according to DGUV V3. This combination steamer offers space for 20 x 1/1 GN containers. In automatic mode, the unit automatically detects the ideal cooking path, the size of the food, the loading quantity, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport (W x H): 925 x 1900 mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Serial number: E21SI18102702508 Year of manufacture: 2018 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Longitudinal insert: 1/1, 1/2, 2/3, 1/3, 2/8 GN Meals per day: 150-300 Condition: Used, completely overhauled, fully functional. Additional information: In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control - self-cleaning system Core temperature sensor Handheld spray with automatic retraction 8.5-inch color display and touchscreen 5 programmable fan speeds Integrated, maintenance-free grease separation system Automatic start time setting 7 cleaning levels for unattended cleaning - even overnight Humidification adjustable in 3 levels - from 30°C to 260°C 5 programmable proofing stages USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-pickup by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would like to request advice, or would like to view something on-site? You can reach us by telephone during our business hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Sales are made exclusively according to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2025, operating hours: 60 h, functionality: fully functional, warranty duration: 12 months, Equipment: documentation/manual, The wooden frame painting robot system consists of: KUKA IONTEC KR20R3100 robot with KRC4 controller and 7th axis integration 7th axis linear track with servo drive and robot lifting system Control cabinet with a 15” touchscreen interface Beckhoff Safety system with the option to connect safety light barriers or safety mats Spray control system with 4 proportional valves and solenoid valves Automatic nozzle cleaning unit 8 digital inputs / 8 digital outputs for communication with the conveyor and rotation systems 3. Technical Specifications Parameter Value Working range L = 4,000 mm × H = 2,500 mm 7th axis track length 6,000 mm Maximum robot axis speed 700 mm/s Adjustable painting speed 50–400 mm/s Compressed air requirement 8 bar (1,250 l/min) Power supply ~3 × 400 V, 50 Hz Scanner resolution 7 mm × 7 mm Blsdpfxezl Sbzj Ahmen Installed power 15 kW Maximum tool weight 20 kg 4. Frame Recognition and Scanning System The scanning system consists of: Industrial scanner Encoder Dedicated software with an automatic program generator The system detects: Object shape Position relative to the traverse Contours Based on scanning data and operator-defined parameters, the software automatically generates the optimal painting program for the robot. 5. Flexible Recipe System Surface coating quality depends on adjustable, operator-defined parameters. The system allows the creation of unlimited product recipes depending on: Product type Product size Frame configuration (frame, sash, panel) Profile type Large and small format frames Separate parameter sets ensure optimal paint coverage for each product type. Adjustable Parameters: Robot painting speed Spray gun angle relative to the product Spray gun distance from the product Spray start and stop delay Paint reduction at intersections and corners Product thickness Spray penetration depth for internal surfaces Air flow regulation Paint pressure control 6. Painting Process Sequence 1. External surface coating 2. Internal surface coating 3. Final facade finishing layer This sequence ensures complete and uniform coverage of all surfaces. 7. Supported Products The software can automatically generate painting programs for: Standard rectangular European windows (without additional trims), where the internal opening painting surface ≥ 350 mm Flat-surface Closed door frames mounted on a traverse (no open ends)

Condition: used, mileage: 24,678 km, power: 184 kW (250.17 HP), first registration: 10/2023, overall weight: 16,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 09/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, ASR, BrakeMatic, single-tone horn, ESS, EBA, MAN Tronic, MAN Media Truck Radio with 7-inch color display, LGS IV, BT hands-free system, TBM3/RIO ready, dual engine configuration, side brooms left and right. High-pressure washer 100 bar with approximately 30 l/min, hand lance, spray bars on the sweeping material pick-up unit and cylindrical brushes. Blodpot Hcdvsfx Ahmen

Condition: used, mileage: 126,931 km, power: 382 kW (519.37 HP), first registration: 05/2023, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 6x4, wheelbase: 1,400 mm, color: white, driver cabin: other, gearing type: automatic, suspension: steel-air, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, parking heater, trailer coupling, permissible total weight: 33000 kg, leaf spring air suspension, tipping hydraulics: Meiller, retarder: Ecotarder, digital tachograph, trailer coupling: pintle hitch on end crossmember, Rockinger, on end crossmember frame, fifth wheel coupling: 185 mm mounting height, JOST JSK 37 C 2 inch, maneuvering coupling: Rockinger SK5 on end crossmember, on end crossmember, Rockinger, on end crossmember frame, auxiliary drive: 430 Nm output torque of the gearbox-mounted auxiliary drive, direct pump connection to the gearbox-mounted auxiliary drive, NH/4c without flange f1.14 at approximately 2:30 o'clock, speed ratio approximately f1.15 of the gearbox-mounted auxiliary drive to engine speed, direction of rotation of the gearbox-mounted auxiliary drive like the engine (left), gearbox-mounted for short-term operation of less than 60 minutes, switchable gearbox-mounted auxiliary drive, electronic braking system EBS, brake assistant, Climatronic, auxiliary heater: 3.8 kW, comfort driver's seat, driver's seat with air suspension, armrest for driver, heated driver's seat, headlight range adjustment, MAN Media Truck Advanced, MAN SmartSelect, sound system, multifunction steering wheel, adjustable steering column, lumbar support for driver, anti-lock braking system ABS: Offroad with additional off-road logic, fog lights, heated exterior mirrors, central locking, tinted windows: tinted door windows, tinted laminated windshield, rear differential lock, sun visor: in front of windshield, twin tires: on rear axle, on 2nd rear axle, refrigerator, rotating beacon: rotating warning lights on the driver's cab roof, right and left, LED rotating warning lights yellow (individual LEDs light up in cascade - all around), axle load indicator, work lights, hill start assist: MAN EasyStart, LED daytime running lights, connection plug 1x15-pole, lift roof (manual), cup holder, EfficientRoll, turning light, telematics system: MAN Telematics, smartphone app integration, speed limiter: adjustable driving speed limiter (DSL), limiter (engine control), electronic 89 km/h + 1 km/h tolerance (engine control), anti-spray, trailer brake. Bedpfx Ahez H Atnjmsln

Condition: used, empty load weight: 8,950 kg, maximum load weight: 27,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 12/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 26,000 mm, total width: 40,000 mm, total height: 140,400 mm, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2023, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer Schmitz SCB, type: freezer unit, operating hours (diesel): 4,027 / (electric): 57, double-deck with beams, electrical connection, color: white, suspension: air-lift, lifting and lowering function, cooling system: on-the-road cooling with diesel drive & stationary cooling, lift axle: 1st axle, air distribution channels, tarpaulin with strap fasteners, pallet box (36), portal door, brake: disc brake, start/stop function, storage compartment 1, temperature recorder: Euroscan, refrigeration unit type: Carrier Vector HE19 d/e, anti-spray, roof profiles, circulation wall, aluminum floor, double spare wheel holder with wheel, ferry lashings, remote thermometer, cargo securing rail, 2x 7-pin + 15-pin power connections, digital fuel gauge, work light (side, LED), compressible roll-on/roll-off ramp buffer (DRP), 2x reversing lights (LED), partition wall prepared. Bljdpfez H Ar Rex Ahmjn

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, removable posts, 40 mm wooden floor, 3 post pockets in the center for plug-in posts 80 x 80, 6 tie-down points, outer frame with tie-down eyes, reinforced gearbox support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression, rear, surcharge for front panel grille 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 8 tons, and 2 x folding supports at the rear, price: 1,900 euros, -- printing errors, errors and changes excepted, sample images --, more data at: !, More Details: ! Bedpfjz H Immsx Ahmoln