Used Stefiglass Sprint 1600 for sale (4,000)

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Psdpfx Agokvnuus Djgk Height arm 1400 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Z000071400101, total width: 1,400 mm, total length: 2,050 mm, total height: 2,150 mm, type of input current: three-phase, overall weight: 1,100 kg, Powerful industrial blower suitable for a variety of applications. The stationary fan with a 600 mm diameter can be used for cooling, ventilation, heat dissipation, or for displacing water mist and dust. The unit has four rollers and forklift pockets for loading. Electric motor power (blower): 15 kW Air flow rate: 33,000 m³/h Speed: 13.8 kW / 1470 rpm Electrical connection: 400 volts / 50 Hz / 32 amps Cable length: 5.0 m Pgjdpfx Agswbfm Sj Dsk Pickup and inspection available in D-89188 Merklingen.

Condition: used, Year of construction: 1994, Make: HYDRAP, Model: HPDZ b 1600, Year of manufacture: 1994, Serial No.: 6784, Max. pressure: 1,600 t (ram 1,000 t + blank holder 600 t, can be coupled), Sliding table, 3,600 x 2,200 mm, Ram clamping area 3,620 x 2,200 mm, Ram stroke 1,500 mm, Table draw cushion pressure 36 - 360 t, Table draw cushion stroke 450 mm, Press control, Operator panel, swiveling, Linear robot Strothmann Pgedpfox Ry Tfsx Ag Dek +++ Note: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. sub spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Tool stations: 6 / 4 positions Fixed stations: 6 Driven stations: 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool stations: 2 / 3 positions Pjdpfxjyxpqve Ag Djgk Fixed stations: 2 Driven stations: 3 Y2 SLIDE Tool stations: 3 / 2 / 2 positions External machining: 3 Internal machining: 2 Driven stations: 2 Weight: 4,500 kg Bar feeder: IEMCA BOSS

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Pgodpetltl Hjfx Ag Dsk Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 18 m/min, controller manufacturer: Fanuc, controller model: 0iMC, table width: 2,000 mm, table length: 800 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 6,000 rpm, spindle nose: 50, number of spindles: 1, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 125 mm, tool weight: 15 g, Equipment: chip conveyor, documentation/manual, The machine include chip conveyor, high pressure pump, tool older cones. Podpfsx Tri Dex Ag Dsgk

Condition: good (used), Rotary vane vacuum pump oil circulation lubricated Manufacturer: Busch Type: RA 1600 B Status: Refurbished or tested and serviced available Warranty: up to 12 months Suction capacity: approx.1000m³/h Pgodpfsd Hh Nkex Ag Dok Ultimate pressure: approx. 0,5 mbar Operating fluid: Mineral oil (Included) Delivery time: 1-2 Wo.

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm Pjdpfxovuugco Ag Djgk column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg Pedoxm Skrepfx Ag Djgk • Dimensions: 7000x2400 mm Location: Bielefeld

Condition: used, Year of construction: 2004, functionality: fully functional, motor manufacturer: SEW, Equipment: type plate available, Curved Belt Conveyor, Conveyor Belt Curves, Belt Curve 45 Degrees with Drive Manufacturer: Transnorm Year of manufacture: 2020 Condition: used Model/Type: TS 1600-105/45Degree Total external length: approx. 1200 mm Pgodoywwc Dopfx Ag Dsk Total internal length: approx. 540 mm Total width incl. motor: 1100 mm Conveyor width / belt width: approx. 700 mm Belt type: smooth belt, KT58-smooth Including support legs Including SEW motor with Movimot unit 1.1 kW, 2900/393 rpm Stock quantity: 3 units Price: per unit Internal item number: 2026032306 Conveyor technology – reliable and ready for immediate use The conveyor system offered here was in continuous operation up until dismantling and is fully functional. Features: • Condition: fully functional, with normal signs of use • Ideal for efficient and fast material handling • Properly dismantled and packaged for safe transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to high-quality workmanship, this conveyor system ensures smooth and gentle material flow – even under heavy loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading – we are your competent partner. We are happy to assist you with the planning, design, and implementation of customized solutions. Upon request, we will provide you with a tailored offer. Simply let us know your requirements and site conditions. Benefit from our many years of experience and our strong network of specialists. We successfully realize projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Trades • Electronics sector Together, we develop economical and sustainable solutions to optimize your material flow. We also provide comprehensive support in automated sorting technology and complementary systems such as pick racks or container solutions.

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA Pgjdpfsyxdwdox Ag Dok • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: new, Year of construction: 2026, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Machine description Strong, solid and compact design ensures convenient and and failure-free operation Sliding table saw mounted on a spindle tilting in relation to the worktable capability Steel, welded body with a permanent cast iron table and a movable table made of strengthened aluminium – the table of this machine is very durable and does not deform Technical parameters CUTTING LENGHT 1600 mm CUTTING WIDTH 1200 mm Psdpfx Agotz Srle Djgk SAW TILT 0-45° CUTTING HEIGHT AT 90° 80 mm CUTTING HEIGHT AT 45° 56 mm MAX. SAW SIZE 315 mm MAX. SCORING SIZE 120 mm MAIN SAW SPEED 4000/6000 obr/min SCORING SPEED 8000 obr/min MOTOR POWER OF CONTINUOUS WORK S1 5,5 kW SCORING MOTOR POWER (CONTINUOUS WORK S1) 0,75 kW WEIGHT 460 kg

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Podpfeyfgx Nsx Ag Degk Parts shown by hand not come. Technical details are shown on pictures.

Year of construction: 2006, condition: like new (used), With machine come 5 live tool holders and 5 normal tool holders. Pedpfx Agslbmy Uj Dsgk Parts shown by hand not come.

Condition: like new (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Offering an as-new DMG MORI bar guide with 2000 operating hours, including an IEMCA BOSS 338 Type 32LL bar feeder. Pgedpfxjyw S Eme Ag Djk

Condition: good (used), Year of construction: 2006, Demag systec 160/520-430 (2010) Pgjdpfx Agjyyzpys Dsk

Condition: good (used), Year of construction: 2007, workpiece dia. 1400 mm Podpfx Agewzmqre Dogk boring diameter 100-500 mm control Sinumerik 840D

Condition: used, Year of construction: 2007, machine/vehicle number: M1348, Dimensions: 255 width x 170 depth x 254 height Weight: 4,100 kg Max pressing force: 400 kN (40 tons) Max bending length: 1,600 mm Distance between uprights: 1,600 mm X-axis travel: 600 mm Max stroke: 290 mm Controlled axes: X, Y, R Control: Equipment: 4 backgauges Condition: Original monitor defective --> Second monitor installed and connected to the machine. (Works) Crowning: Servo-mechanically operated Power Belt system --> even force distribution Pgedpfjylhkyjx Ag Dek The machine is fully operational and in good overall condition.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Mobile Concrete Batching Plant – SBM EUROMIX 1600 Manufacturer: SBM Mineral Processing GmbH Type: EUROMIX 1600 Type CM 128 L Year of Manufacture: 2021 Control System: GEDIS IBS33W Mixer Capacity: 1,670 liters Production Capacity: approx. 60 m³/h Total Production: approx. 25,000 m³ Aggregate Bins: 4 compartments Heating System: 1 × hot air system for aggregates Pgedeywi I Sjpfx Ag Dsk 1 × hot water system for fresh concrete production Admixture System: Container with 6 × 1,500 liter tanks 6 admixture pumps Cement Silos: 4 × 85 tons Condition: The plant is in very good condition and fully operational. Availability: Immediately available Location: Central Germany Price: On request Note: All prices are net ex works / ex location. Subject to prior sale, errors and/or misrepresentations. Sold without warranty or guarantee, as seen and inspected. Any reproduction, reuse, publication or copying of this offer in whole or in part is strictly prohibited.

Year of construction: 1991, condition: used, machine/vehicle number: 149125/95, max. operating pressure: 8 bar Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Space requirement: 820 x 950 x 1200 mm high Weight: 360 kg Air vessel, make KAESER, year of construction 1999 Capacity: 1000 l Pgedpfjby Hpbjx Ag Dek max. operating pressure: 11 bar Space requirement: 800 Ø x 2300 mm high

Year of construction: 1997, condition: used, Built in 1997 Pgjdjc Nhpfepfx Ag Dok Input height max 500 mm Output level max 3.000 mm Length conveyor belt approx. 54 m Equipment • drying tower downward • infeed left at the top • outfeed 90° at the bottom

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Hersteller: ARBURG Type: 520 A 1600-400 Electric machines Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Pgjdpfxsxf T I Ns Ag Dek Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m

Condition: used, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with 2-axle steering -Platform: 3200/1600/H490 mm -Load capacity: 4 t -Tires: Solid rubber 310/120-220 -Trailer coupling: for industrial trailers -Overall dimensions: 5530/1600/H590 mm Pgodporzvwpsfx Ag Dsk -Transport dimensions: 3620/1600/H590 mm -Weight: 540 kg

Condition: used, Year of construction: 2004, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, battery manufacturer: Midac, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,400 mm, Weights Empty weight: 3.212 kg Functional Lifting capacity: 1.600 kg Number of valves: 3 Supply voltage: 48 V CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Fork carriage: Sideshifter Additional information Pjdpsyu T I Njfx Ag Djgk Please contact Bas Sindorf for more information

Condition: new, Year of construction: 2025, The DURMA AD-S 611600 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1600 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Podpfovy Sraox Ag Dsgk Technical details: - Model: DURMA AD-S 611600 - Pressing force: 1600 tons - Working length: 6 meters - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the backgauge control - Support for heavy and large sheets thanks to the integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.