Used Timberland Band Sawmill for sale (4,538)

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece Fgsdewka S Ijpfx Ad Nob - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm Fsdpfx Aewka H Sed Nsgb - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2007, machine/vehicle number: 0003000421, functionality: unexamined, AUTOMATIC BAND SAW Fgjdpfxjy Ndnwe Ad Njb

Condition: excellent (used), Year of construction: 2004, Manufacturer: KASTO Model: KASTOtec A4 Fjdpfjygl Thex Ad Njgb Year of manufacture: 2004 Specification HIGH-PERFORMANCE BANDSAW Cutting capacity round 90°: 430 mm Cutting capacity flat 90°: 430 x 430 mm Feed range: 0–600 mm Multi-feed range: 0–9999 mm Min. cutting length: 35 mm Max. cutting speed: 12–120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW 4 m material feed conveyor 4–5 new saw bands included in delivery.

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning Fjdec Tmygspfx Ad Negb edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Wheel diameter: 630 mm Table dimensions: 890x700 mm Tiltable table Motor: 3 kW Fgodpfxsy Ivk Ij Ad Nsb Max cutting height: 330 mm Throat (band to frame): 580 mm Dimensions (L/W/H): 1000x1190x2230 mm

Condition: excellent (used), variable regulated feeder table dimensions 600x800mm screw band tension dimensions 1500x1100x2400mm Fgjdpfxsy N N Nas Ad Nsb

Condition: used, Year of construction: 2014, machine/vehicle number: 42, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 2,550 mm, total length: 5,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, saw band length: 5,900 mm, saw band width: 13 mm, We offer a used, fully operational CNC 020 industrial bandsaw with automatic feeder, designed for high-precision cutting of wood or composite materials. The machine features CNC control and automatic feed in X, Y, and C axes, allowing fast, accurate, and repeatable cuts up to 2000 mm in length. Technical data: CNC Cutting Length: 0 – 2000 mm Cutting Height: 0 – 160 mm Cutting Angle: +90° / -90° Cutting Depth: 100 mm Saw band: 5900 x 13 mm Flywheel Diameter: 900 mm Flywheel Upper Adjustment Range: 0 – 80 mm Flywheel Speed: 750 rpm Saw Speed: 2000 m/min Flywheel Motor self-braking 15 HP Forward Movement Speed X-axis: 0 – 70 m/min Return Speed X-axis: 70 m/min Forward Movement Speed Y-axis: 0 – 20 m/min Return Speed Y-axis: 20 m/min Pneumatic Pressure: 6 BAR X-axis Motor Torque: 12 Nm Y-axis / Y2-axis Motor Torque 4.3 Nm Fsdpoxm S E Aefx Ad Nsgb B-axis / C-axis Motor Torque 1.1 Nm Z-axis Motor Torque: 4.3 Nm Overall Dimensions 5000 x 2200 x 2550 mm Weight CNC 020 2600 kg Additional Information: We have 4 identical machines available, all from similar years of manufacture, in good condition. Ideal for production lines requiring multiple synchronized units or for spare parts standardization.

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Fsdsy Nzltspfx Ad Negb Made in Japan. Weight: 70 kg.

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Ideal for wrapping business cards, flyers, calendars, and other materials. Can be used with paper or foil tape. Fgodjy Nzlmopfx Ad Neb Technical specifications: Tape width: 29 mm Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Weight: 40 kg. Made in Japan.

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Fgjdjy Nuhnepfx Ad Nsb Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) Fgedpfxev Hm T Sj Ad Nsb - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Fgedsv Dg A Uspfx Ad Nsb Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n Fgedpfxjhy Tlrs Ad Neb 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL Fjdpec S Di Rofx Ad Nogb device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Fgsdpfx Ajl D Rp Ejd Nob Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Fsdpfslc Ewijx Ad Nsgb Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Fgodpfsdcd Dljx Ad Neb Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Fodpfx Adofbr S Rs Njgb

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm Fgodsdibw Aepfx Ad Neb motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: excellent (used), functionality: fully functional, Esterer SS 71 swing frame sawmill. Frame size: 710 x 710 mm. Stroke: 500 mm. Speed: 300 rpm. Fully hydraulic with overhang adjustment. The saw was completely overhauled in the 1990s and has since only been used occasionally in a small joinery workshop. Includes: saw blade holder with insertion angles. Fgsdpfx Adey Ipnms Nsb 37 kW motor with gearbox. Electrical control cabinet. Splitting wedge ARTA / C. Dismantled and loaded free on truck.

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Fjdpfxow S Dmdj Ad Negb Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm Fsdpfx Adey H Dmho Njgb - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: excellent (used), Year of construction: 2011, input voltage: 400 V, Equipment: CE marking, Mitre Band Saw - For left mitre cuts up to 60° and right up to 45° - Cutting speed: 37 and 74 m/min. - Automatic saw frame lowering with rapid approach to the workpiece and shut-off at end of cut - Quick-release vise in T-slot, sliding for quick position change - Chip removal brush - Automatic cooling system - Machine base - Incl. 1 HSS-Biflex saw band 2765 x 27 x 0.90 mm Cutting capacity: 90° Round Ø 255 mm Square 240 mm Rectangle 300 x 180 mm 45° Round Ø 210 mm Square 190 mm Rectangle 210 x 100 mm 60° Round Ø 135 mm Square 115 mm Rectangle 140 x 90 mm Fgodpfxoy Id Dcj Ad Nob

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Fgjdpfxjy H Hzbe Ad Neb Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM