Used Traub Tnc 42/65 Dg for sale (12,869)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 124,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. TECHNICAL DATA • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top Turret Stroke X/Z: 50 / 100 mm • Rear Attachment Stroke X: 73 mm • Rear Attachment Stroke Y: ±50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Connected Load: 22 kW • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW Fgedpfoza Ucxsx Accsc • Total Rated Current: 60 A ADDITIONAL EQUIPMENT OPTIONAL • FMB turbo 5-42 XT / 3200"C" Bar Feeder • Bar Feeder Year: 2003 • Hinged Belt Chip Conveyor • Chip Conveyor Discharge Height: 950 mm • Guide Tubes D25, D36 • Running Workpiece Stop, Shank 16 × 16 mm • Brankamp CMS 100 Collision Monitoring Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Fgodpfxjzaud Aj Accoc Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling Fodow I R Ndspfx Accegc 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment *

Year of construction: 2008, condition: excellent (used), centrifugal vertical cantilever pump chemcial pump FIP ALFA 65-40 V2CM construction of year:2008 DN:50 Nominal flow 40 m³/h Nominal head:45 m Fjdpfx Acsh Rwbrscogc p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1470 electrical power 16,5KW 400V 50Hz 34,7 A engine speed: 1470 Execution: vertical, radially split volute casing pumps sump pump or channel impeller Applications: handling of paint, aggressive and process liquids, even with the presence of solid particles in suspension, in chemicals and petrochemicals industries length: 1700mm width: 700mm weight:450 kg

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Fgsdpfezacwdex Accoc Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Year of construction: 2003, condition: ready for operation (used), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass and steel), flushing gun, connected load: 33kW, control system: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in the control cabinet, operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder magazine, chip conveyor, coolant unit and basic equipment of static and driven tool holders. An on-site inspection is possible. Fgedpfoy U Nq Iox Accsc

Condition: good (used), Internal item no.: 25088 Tool holder Fgjdexu Dcvjpfx Accec Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: good (used), Internal item no.: 25089 Tool holder Thread whirling holder Index / Traub No.: W7045012B Fgjdpfx Acexu Uu Ajcec Very well maintained condition! The holder was used on a Traub TNL18.

Condition: used, mileage: 241,000 km, power: 309 kW (420.12 HP), first registration: 08/2006, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2006, Equipment: ABS, electric window regulation, power mirror, retarder, = Additional options and accessories = - Hub Reduction - Immobilizer - PTO - Sper = Remarks = Scania P420, 2006, 241,000 km Fsdpfx Acsy T Rcvscegc 8x4 with hub reduction, Manual transmission, Leaf-sprung, Euro 3, Naaktgeboren Vortex VP8000 dry vacuum cleaner = More information = Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction Make of bodywork: Naaktgeboren Vortex VP8000 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t Fgodju Rqabspfx Accoc dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: used, Year of construction: 1993, Technical details: Fgedpfxeu Idn Ho Accjc x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm Fgsdpfju Ix N Sox Accsc turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: used, mileage: 21,900 km, power: 309 kW (420.12 HP), first registration: 01/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), * Volvo FM420 6x4 hooklift truck * Meiller RS21.65 body Fedpfx Acsx Ibbfecogc * Steel-air suspension * Tyres 315/70 R22.5 * Twin tyres on the last axle * Lift axle * Trailer coupling * Extendable underrun protection * Euro 6E * Engine displacement 12,777 cm³ * I-Shift gearbox * VEB+ * Short cab with rear window * Wheelbase 4.30 m * PTO (Power Take-Off) * 1 fuel tank 350 liters * AdBlue tank 68 liters * Additional off-road program * Ecocruise cruise control incl. brake cruise control * Collision warning with emergency braking function * Lane departure warning system * Air conditioning * Electric windows (EFH)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, ANAYAK HVM 5000 FIXED-BED MILLING MACHINE CNC HEID. TNC 430 X 4300 Y 1200 Fgjdpfx Acsy Tt Alecec Z 1400 Table 5000 x 1000 Automatic head, tilting 2.5° x 2.5° Spindle 3000 rpm - ISO 50 Automatic tool changer (ATC) with 40 positions Renishaw Chip conveyor Available for inspection while in operation

Condition: used, Year of construction: 2008, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Fedpfx Ajq I Ty Rjccjgc Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 1995, condition: ready for operation (used), Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible. Fjdpfx Acoy Tx Rzscogc

Condition: new, Year of construction: 2025, machine/vehicle number: 40869782, fuel type: diesel, motor manufacturer: Volvo TAD1642GE, General information Field of application: Construction Weights Empty weight: 4.950 kg Functional Generator capacity: 650 kVA Dimensions of cargo space: 490 x 170 x 260 cm Fsdpfxjxbwwto Accogc CE mark: yes Other information Fuel consumption: 89.5 Liter/Hour at 75% Load Generator: Stamford S5L1D-E41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 900 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 20240416011, fuel type: diesel, motor manufacturer: Perkins 1106A-70TAG2, General information Field of application: Construction Weights Empty weight: 1.825 kg Functional Generator capacity: 165 kVA Dimensions of cargo space: 305 x 113 x 173 cm CE mark: yes Other information Fuel consumption: 24,7 Liter per Hour at 75% Load Generator: Leroy Somer TAL-A44J Fgedpfjw Dag Eox Accjc Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 320 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Only 5 hrs. Traded-in from customer who needs more power. Warranty is still applicable. Used Generator Set.

Condition: used, power: 191 kW (259.69 HP), first registration: 05/2000, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2000, Scania P94 -260, 2000, Euro 2, 4x2, Manual transmission, Leaf-sprung, Concrete mixer = More information = Suspension: leaf suspension Front axle: Steering Fedpfxoy Rzdxo Accjgc Rear axle: Double wheels GVW: 18.000 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), Technical parameters Maximum cutting capacity Round 650mm Square 650×800mm Saw blade Saw blade speed 20~80 m/min Saw size 54X1.6 Guides Carbide and bearing blade guides Cleaning Wire brush & flood coolant Tension Hydraulic Motor power 7.5 kW Fgedpfxeullzhs Accjc Hydraulic 2.2 kW Coolant 0.12 kW

Condition: good (used), Year of construction: 2008, functionality: fully functional, cam-controlled automatic lathe including bar magazine - Manufacturer: PMT (Traub India) - max. bar diameter: 25 mm Fgodpfxsy R Tqqs Accec - tailstock - 2 vertical tool holders - 2 horizontal tool holders - Weight approx. 650 kg - Dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - Bar loader IEMCA AS 325/62 (max. bar length 6,200 mm)

Condition: good (used), Year of construction: 2015, functionality: fully functional, cam-controlled automatic lathe including bar magazine - Manufacturer: PMT (Traub India) - max. bar diameter: 25 mm - tailstock - 2 vertical tool holders - 2 horizontal tool holders Fgedpfey R Tm Sjx Accjc - Weight approx. 650 kg - Dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - Bar loader IEMCA AS 325/62 (max. bar length 6,200 mm)

Condition: good (used), functionality: fully functional, cam-controlled automatic lathe including bar loader magazine - max. bar diameter 25 mm - tailstock - 2 vertical tool holders - 2 horizontal tool holders - weight approx. 650 kg - dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - bar feeder IEMCA AS 325/62 (max. bar length 6,200 mm) Fgedpfx Aoy R Tg Ssccec

Condition: ready for operation (used), Year of construction: 2000, operating hours: 116,688 h, spindle speed (max.): 5,600 rpm, travel distance X-axis: 375 mm, travel distance Z-axis: 450 mm, spindle motor power: 11,000 W, total height: 1,800 mm, overall weight: 3,500 kg, controller manufacturer: TRAUB, controller model: TX8H, product length (max.): 2,700 mm, number of axes: 3, This 3-axis TRAUB TNA 300 horizontal turning machine was manufactured in 2000. It features a spindle diameter of 65 mm and includes a high-pressure coolant system, driven tools with 4 kW power, and an automatic bar change system. The machine is equipped with a chip conveyor and tool monitoring systems for enhanced efficiency. If you are looking to get high-quality turning capabilities, consider the TRAUB TNA 300 machine we have for sale. Contact us for further details. • Spindle bore / machine capacity: 65 mm • Installed 185E collet system capacity: max. 60 mm clamping diameter • Machine version: without tailstock • Basic configuration: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control system: TX8H, 32-bit technology; processor latest generation (at time of build); parameter data on diskette • Axes/functions: • C-axis: included (numerically controlled spindle positioning and turning axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive shutdown after material end: selectable via parameter • Error message via parameter: selectable • Guideway cover: included • Workholding: • Collet clamping system: ROHM • Collet system compatibility: • DIN 6343 size 48, max diameter 42 mm Fgjdey Sg Dgepfx Accec • Rubberflex series 52 compatible • Rubberflex series 36 compatible • Fahrion collet FM 1149 MB compatible • Fahrion collet FM 1148 MB compatible • Electrical: • Electrical system according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Accessory voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left side discharge • Bar feeder preparation: included • Bar feeder: TRAUB DNH 61-3000 (automatic) • Feeding: telescopic pusher system • Bar shapes: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included • Residual piece removal: forward • Central adjustment of bar diameter: included • Stepless feed force adjustment: included • Central magazine adjustment: included • No guide channel change required • No clamping sleeve change required • Short remnant pieces possible • Transverse loading system • Transport weight: approx. 2100 kg Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 1993, condition: used, machine/vehicle number: 156, CNC control Traub System TX8 F, with 1 turret with 6 tool stations and 1 turret with 6 tool stations, driven tools, bar capacity 30 mm, equipped with fleece filter system, coolant device and automatic bar loading magazine. Fsdpfx Acjy Sqkwscogc