Used Union Ti1800 for sale (159)

Condition: excellent (used), 1 used, very well-maintained universal milling head system "HURON" with hydraulic tool clamping and electric tool release signal. Technical data: Cgsdpfoy Uby Iox Af Hju Spindle mounting, DIN 2079: ISO 50, for tools according to DIN 69871 + 69872, Type A Overhang: 377 mm Max. speed range: 3500 rpm 3750 rpm 50% duty cycle/hour 4000 rpm 30% duty cycle/hour Max. drive power: 15 / 22 kW Operating pressure for tool release: 80 + 5 bar Dimensions L x W x H: 450 x 305 x 360 mm Weight: approx. 180 kg Accessories / Special features: • 2 manual swivel table systems "HURON" • Hydraulic tool clamping • Electric tool release signal • For retrofitting to conventional, NC or CNC milling and table milling machines or drilling machines (e.g.: AUERBACH, UNION, MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, ARSENAL, ...) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler – Inline Oil Cooler D20V D30V 2 inline oil coolers – Cooling system for machine cooling – Available individually. Two standalone inline oil coolers / flow-through coolers for cooling oil / hydraulic oil, manufactured by Wöhr Kältetechnik, designed for cooling/temperature control of the coolant circuit or hydraulic system of machine tools. Each unit features an integrated circulation pump and flow monitor. The housing contains an integrated control cabinet with connection cable, LAE temperature controller MTR11, and a volt-free fault contact. The built-in circulation pump is a gear pump. The cooling units are suitable for clean oil. A programming manual for the temperature controller is included. Both coolers are in used condition. Cooling Unit Wöhr Inline Oil Cooler Type D 20 V, year 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, Walter Procon plug connection (cooler was installed on the hydraulic system of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Inline Oil Cooler D 30 V Wöhr Inline Oil Cooler Type D 30 V, year 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE power plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. Cgedpfxog U H E Se Af Hju The oil coolers / oil cooling systems are in used and well-maintained condition. Price per unit: €1,950. All technical data subject to typographical or factual error. We only sell to countries within the European Union.

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Cedpjxxalnefx Af Hogu Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, overall weight: 30,800 kg, empty load weight: 30,800 kg, lifting height: 6,900 mm, drive condition: 90 %, chain condition: 90 %, number of seats: 1, shovel volume: 3 m³, suspension: steel, Year of construction: 2020, operating hours: 13,496 h, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, head guard, hydraulics, low noise, onboard computer, rear pickup, steel tracks, tilting carriage, An authorized SUBARU dealer in Łaziska Górne has a Japanese-made CAT 330D2L crawler excavator for sale, complete with a set of three buckets and a soil loosening hook. Inspected by our mechanics, the hydraulics are fully functional and have minimal play. It has been nicely refurbished and prepared for further heavy-duty work. It features 60cm wide steel tracks, a GPS MC3000 for precise digging, and is additionally equipped with 360-degree cameras. WE OFFER AFFORDABLE TRANSPORT THROUGHOUT THE EUROPEAN UNION AS A PROMOTION WITH OUR FLEET! The price includes a complete set of documents for registration. We offer every form of payment: Leasing, credit, cash, and bank transfer. With cash payment or bank transfer, you can drive the vehicle away from the dealership immediately. Additionally, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid cars and trucks to the specified address throughout Europe. More information about our services is available from our sales representatives. Engine: Model: Caterpillar C7 Type: diesel, 6-cylinder, turbocharged, intercooled Displacement: 7.2 l Power: 204 kW (approx. 277 hp) Fuel injection: HEUI (hydraulic-electronic) Operating parameters: High torque at low speeds Very good cooperation with the hydraulics Stable operation under heavy load Cedpfozadcbjx Af Hjgu Advantages: Simple and durable design Low operating costs No complex exhaust emission electronics Proven unit for heavy earthmoving work Hydraulic system: Maximum working pressure: 35 MPa Pressure in lifting mode: 38 MPa Pump flow rate: approx. 480 l/min Rotation pressure: approx. 29.8 MPa Working forces: Bucket digging force: approx. 179 kN Arm digging force: approx. 126 kN Swing mechanism: Swing speed: approx. 11.5 rpm Torque: approx. 110 kNm Operating parameters: Maximum digging depth: approx. 7.2 m Maximum reach: approx. 10.7 m Loading height: approx. 6.9 m Maximum digging height: approx. 10 m Working equipment: Bucket capacity: approx. 1.5–1.8 m³ Boom length: approx. 6.15 m Arm length: approx. 3.2 m General parameters: Operating weight: 30800 kg Undercarriage: LC (Long Carriage) Track width: approx. 600 mm Application and main features: High digging force and efficient hydraulic system Simple and durable engine design with no complex exhaust emissions Very good parameters for heavy earthmoving and loading work Transport dimensions: Transport length: 10.4 m Transport width: 3.19 m Transport height: 3.35 m Undercarriage width (LC): 3.19 m Track length on the ground: 4.0 m The stated price is net and applies to exports and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price!

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Model: Sprint International Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Cgedpfxjy Au Ubj Af Hou Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. All components are complete.

Condition: used, Year of construction: 1991, operating hours: 6,750 h, load capacity: 3,000 kg, lifting height: 6,750 mm, motor manufacturer: Perkins, fork length: 1,300 mm, Equipment: pallet forks, sideshift, We are offering this used Manitou M-230-CP rough terrain forklift, manufactured in 1991. Cjdpfoy Tl Itox Af Hegu It has 6750 operating hours, a Perkins engine, and a maximum lifting height of 6.75 m. It is being sold with a new fork and hydraulic scoop. If you have any questions or require further information, please do not hesitate to contact us by email.

Condition: used, functionality: fully functional, Clamping block for SK 40 tools The metal plate is labeled Lorenz Ettlingen 7-191-020-0001 For securely clamping tool holders with SK40 during tool changes – tool clamping E.g., as an accessory for Lorenz gear hobbing machines – slotting machines. Clamping vice / mounting table / clamping cube. Clamping device for secure fixation and clamping. Clamping tower – tool change device Suitable for 4 pcs. SK 40 tool holders Price / details on request Cgedpfxjyuwzms Af Heu All technical data subject to errors and misprints. We sell exclusively to countries within the European Union.

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Csdpfx Aotwm Ubof Hjgu Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg This modern Ficep Flex FRC 1201 coping robot system is in very good condition.

Year of construction: 2020, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BV200219443, 🔥 Pyrolytic Cleaning of Screws – DEMO Unit | up to Ø70 mm | Fully Automatic | 12 months warranty Efficient and safe solution for removing polymer residues from screws used in extrusion and injection molding – no deformation, no manual cleaning required. Completely made in the European Union. _____ Key Features • Suitable for all thermoplastic materials • Max. screw diameter: Ø70 mm • Vertical process – no screw deformation • Fully automatic operation (no operator required) • Cleaning time: 3–8 hours (depending on contamination) • Process temperature: 400–500 °C • Integrated gas treatment system with water tank and pump _____ Technical Data (Type PC-70) • Max. screw diameter: 70 mm Codpfsy Id Tqjx Af Hogu • Max. screw length: 2,450 mm • Max. working height: 3,200 mm • Total power input: 25 kW _____ Condition • DEMO unit – directly from manufacturer • Excellent condition with full 12 month factory warranty. • Available immediately FCA BOCO price: 27 990,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, 🔥 3D printing filament Extrusion Line – DEMO Unit | 1.75–5 mm | Up to 100 m/min | 12 months warranty High-performance extrusion line for production of filaments (3D printing, welding wires, technical strings). Reliable, fully automated solution directly from manufacturer. Completely made in the European Union. _____ Key Features • Materials: ABS, PLA, PET-G, MARLEX, DOWLEX and others • Filament diameter: 1.75–5 mm • PLC control with an automatic operation • Triaxial measurement for precise diameter control • Continuous production (compensator - up to 140 m of filament) • 3-zone cooling tank (up to 80 °C) _____ Technical Data • Line speed: up to 100 m/min • Output: 5–20 kg/h • Screw diameter: 35 mm • Screw length: 30 L/D • Drive power: 9.2 kW • Cooling tank: 6 m • Spool size: 0.5–5 kg (no downtime during change) _____ Condition • DEMO unit – directly from manufacturer • Excellent condition • Available immediately • Full factory warranty for 12 months FCA BOCO price: 158 850,- EUR w/o VAT Cgedpsy Ipflsfx Af Heu _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Condition: used, Year of construction: 2015, construction width: 400 mm, Workpiece carriers and wire baskets, e.g. for automation. Wire baskets with floor roller, so-called stacking baskets, heavy-duty stacking boxes. Running gear: Cgjdpfx Ajhctykef Hou Wire basket and Wanzel chassis also available in smaller quantities. Floor rollers with 2 fixed and 2 swivel castors each, paired with wire baskets, transport trolleys, roller chassis, roll carts, galvanized and blue-passivated with holding fixtures. Raw material: steel wire C9D. Dimensions: Basket dimensions: W x D x H 400 x 600 x 5.3 mm with carrier Floor roller: W x D x H 430 x 630 x 230 mm, wheel diameter Ø 100 mm. Total height: 1096 mm, suitable for 12 units of baskets. Price per basket: €12,-- Price per floor roller: €78,-- net ex works, plus packaging costs Wire baskets in very good condition. Versatile use. Subject to typing/root errors in all technical specifications. We sell exclusively to countries of the European Union.

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: - Guide rail - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm Csdpfx Aobhfzbsf Hogu - Collet Ø 6 mm with union nut - Operating instructions

Condition: excellent (used), power: 129 kW (175.39 HP), fuel type: diesel, lifting height: 24,000 mm, axle configuration: 4x4, Year of construction: 2017, operating hours: 5,793 h, Equipment: air conditioning, all wheel drive, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: FPT Performance Top speed: 40 km/h Weights Empty weight: 18.900 kg Functional Lifting capacity: 6.000 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Identification Serial number: ZF1RT30D1C7001686 Other information TÜV Marked: yes Transport dimensions (LxWxH): 0,445/6,5225 Production country: IT Additional information Please contact Robert Vijn for more information = Additional options and accessories = - Ad blue - Additional hydraulics - Forks - Original colour - Quick locks - Stabilizer = Remarks = Cgodpfx Asy Ip D Usf Hou Very neat and original Merlo Roto 60.24 MCSS. - From the first and only Dutch owner - CE machine - Year of manufacture: 2017 - Hours: 5793 - Full remote control - Dutch registration - Tilting cab - Extra functions on the boom - Lifting height: 24.00 meters - Lifting capacity: 6000 kg - 95% original paint!! - Tires: 60% good - Extra outrigger pads - all books and CE documents + inspection reports with the machine Transport We offer our customers the opportunity to handle transports in a fast, safe and efficient manner. For domestic transport we work together with various renowned transport companies. For transports over longer distances both within and outside Europe, we have a solid network of transport companies and shippers. This means we can always ensure a suitable rate. You can of course also have your purchases transported yourself. We have the facilities, such as a loading ramp and forklift, for fast and problem-free loading. Export We can assist you with all your export questions. Within the European Union and the latest VAT regulation, buying and selling machines in Europe has become very easy. For export within the EU, in most cases a valid VAT number, an invoice and proof of transport are sufficient. Machines and parts that we sell outside the European Union must always be cleared by Dutch customs. We can take care of all the required export documents. (EX-A, EUR.1 etc)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,206 h, functionality: fully functional, machine/vehicle number: 20170708, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 18,000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (with adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotational drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating Hours Control on-time: 20,248 h Machine on-time: 19,424 h Program run: 11,331 h Spindle hours: 11,206 h Cjdpfx Aey I Tvnof Hegu EQUIPMENT Spindle chiller Kessler swing, 800 mm turning diameter, fully utilizable with zero-point clamping system Note: The touch probe is not included in the offer. The holders, however, are part of the offer.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control Cgodpjygx Hnefx Af Hju - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, AUTOMATIC BULK PRODUCTS PACKAGING LINE PUDAS-AL is designed for automatic packaging of bulk products by weight into prepared bags and consists of: Product hopper 350 ltr • Automatic pre-prepared bag feeding unit • Automatic dispenser with scales and bag fastening unit PUDAS Codpfjxry U Nex Af Hogu • Conveyor for transporting filled bags • Bag sealing unit • Bag pusher for changing the position and direction of the bag • Motorized unloading conveyor Capacity up to 180 bags/hour (depends on the product) Operated product: bulk materials, eg grain, pellets, granulates, flour and ect Packing materials Premade PP, PET or similar type plastic sealable bags with size from 300x400 up to 800x1200mm. Sealing: impulse heat sealer with adjustable height. The seal is single straight line without clustering on sides as for pouch bag. Weighing dosing range 5 to 50 kg/package (can be customised) Accuracy ±1% Conveyor speed Adjustable Interface Colour Touch-screen 7“ (Delta HMI), multilingual Power 380V, 2,4kW Compressed air supply 200ltr/min, 8bar Features: Bag discharge conveyor. Fast and convenient service and adjustment Sertificates, region of origin: CE certified, produced in Lithuania (European Union) , FDA certificates for materials in contact with food products, protection class IP65

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Machine ON hours: 81,189 h • Overall dimensions: 4500 × 2250 × 2700 mm • Voltage: 400 V • Frequency: 50 Hz • Total power requirement: 45 kVA • Full load current: 65 A • External fuse: 80 A • Tool changer: Plate-type tool changer • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) • Safety/enclosure: Maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis • Internal coolant supply (IKZ) Cjdpfx Asy Edv Hsf Hsgu • Chip conveyor • Emulsion (coolant) system • Recooling unit (chiller)

Condition: used, power: 125 kW (169.95 HP), fuel type: diesel, lifting height: 26,000 mm, tire size: 445/65R22.5, axle configuration: 4x4, Year of construction: 2017, operating hours: 7,691 h, Equipment: air conditioning, all wheel drive, Technical information Chassis type: rigid Empty weight: 16.050 kg Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: FPT IVECO Axle configuration Tyre size: 445/65R22.5 Performance Top speed: 40 km/h Functional Lifting capacity: 4.000 kg CE mark: yes History Number of owners: 1 Identification Serial number: ZF1RT21D1C7002129 Other information TÜV Marked: yes Delivery terms: EXW Production country: IT Additional information Please contact Robert Vijn for more information = Additional options and accessories = - Ad blue - Additional hydraulics - Forks - Original colour - Quick locks - Stabilizer = Remarks = Nice and clean, well-maintained Merlo Roto 40.26 MCSS from the first Dutch owner. - Year of manufacture: 2017 - Hours: 7691 - CE machine - Forks - 2 x JIB with hook - Dutch registration (export registration when exported) - Hydraulic quick coupler - Working platform preparation - Remote control - Tilting cab - Air conditioning - Camera on boom and rear - Books and documents included - TÜV and inspections valid until October 2026 Transport We offer our customers the opportunity to handle transports in a fast, safe and efficient manner. For domestic transport we work together with various renowned transport companies. For transports over longer distances both within and outside Europe, we have a solid network of transport companies and shippers. This means we can always ensure a suitable rate. You can of course also have your purchases transported yourself. We have the facilities, such as a loading ramp and forklift, for fast and problem-free loading. Export We can assist you with all your export questions. Within the European Union and the latest VAT regulation, buying and selling machines in Europe has become very easy. For export within the EU, in most cases a valid VAT number, an invoice and proof of transport are sufficient. Machines and parts that we sell outside the European Union must always be cleared by Dutch customs. We can take care of all the required export documents. (EX-A, EUR.1 etc) Cgedpfx Aoyzz Ekof Hsu

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 4,350 mm, total height: 2,200 mm, total width: 1,920 mm, input voltage: 380 V, warranty duration: 12 months, air demand: 6 m³/h, year of last overhaul: 2036, roll width: 17 mm, film width: 17 mm, power: 1.5 kW (2.04 HP), product height (max.): 450 mm, product height (min.): 15 mm, product length (max.): 6,000 mm, product length (min.): 450 mm, Edda Olympia series of Horizontal Stretch Wrapping Machine with various models are well-known as the best solutions of packaging needs. All models are equipped with the latest technology. By the durable mechanical structure and required systems for operator safety, this machines compliance with European Union safety directives and are certified with CE Certificate. All standard components which used in machine are the best in their field as worldwide trademarks. These machines are developed for a long and trouble-free servicing life and are produced with well-know, best quality components by our qualified staff. Edda Olympia Series packing machines are intented for easy packing of the products by the PE bubble nylon, PE foam film and PE strecth film materials. Csdpfxoy N Uzzs Af Hogu

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107965, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel path: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel path: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests in relation to part diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum rotational speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Tool shank as per DIN 69880: 12 positions - BMT65 - Number of positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Cedpfoxw Sviex Af Hsgu Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total machine dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: Optimized chip removal and easy loading/unloading - CNC controller: GE Fanuc FS 32i B - High precision: Axis positioning accuracy in X, Z ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and wide speed range - Process control: Marposs T25 measuring probe - Automated loading/unloading: Parts are loaded and removed via integrated automation system - Live tooling: Enables drilling and milling operations in addition to turning - Tool life monitoring with sister tool management - Chip conveyor & coolant filtration system Knoll with paper filter and 40 bar pumps (capable of filtering 2 machines) - Fully enclosed work area; integrated work lighting - Documentation: Available electronically; hardcopy manuals incomplete Machine status: NOT WORKING - Live tool drive motor - Safety locking mechanism (Euchner) for loading door - Turret drive motor - Turret motor driver - Lubrication pump - Hydraulic manifold (4x electrovalves) - Lubrication pressure system - Rotary union - Hydraulic cylinder for loading door - Spindle clamping/unclamping sensor

Condition: like new (used), Year of construction: 2017, Technical Data Product Number: SK 15-320 Year of Manufacture: 2017 Machine Dimensions: 2100 x 1000 x 1700 mm (W x D x H) Belt/Knife Width: 665 mm Weight: approx. 420 kg Degree of Protection: IP 69 Capacity: 12 tons/8h Very sharp roller Machine can be integrated into a production line The Townsend SK 15-320 skinning machine is a conveyor-type skinner designed for removing pork skins from applications such as bellies, jowls, back fat, slices, and other pork by-products. This versatile skinner can also be used for flat, heavy beef applications where the removal of large amounts of fat is also required. Features: - Linear bored housing ensures perfect alignment of the toothed roller and incision mechanism. - Single drive belt positioned on one side for easier maintenance - Adjustable height output conveyor is ideal for various production line setups - Available with adjustable or fixed lower base Csdpfxjy A T Hpe Af Hjgu - Assisted opening and closing of the cover - Available with adjustable or fixed blade clamp - ThinAdjust control allows adjustment of skin thickness during operation - Available with entry and exit extensions for multiple production line layouts - Open conveyor frames for easy maintenance and sanitation - Low operational costs - Easily adjustable pneumatic or spring cylinders ensure optimal performance for various products - Easy-to-lock upper feed mechanisms - Fully dismountable for cleaning Fully functional after service. No tools required for disassembly and cleaning Pressure adjustment of the rubber wheels is required during operation to improve the skinning process for either tall or short products The unit is in perfect condition, free of defects after a complete overhaul Complies with all European Union standards and safety requirements – CE certification.

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology Cjdpfjxgnz Tsx Af Hegu - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 7,000 mm, total height: 2,200 mm, total width: 2,350 mm, input voltage: 380 V, overall weight: 1,700 kg, compressed air connection: 6 bar, warranty duration: 12 months, film width: 250 mm, power: 5.2 kW (7.07 HP), product height (max.): 850 mm, product height (min.): 50 mm, product length (min.): 650 mm, Edda Olympia series of Horizontal Stretch Wrapping Machine with various models are well-known as the best solutions of packaging needs. All models are equipped with the latest technology. By the durable mechanical structure and required systems for operator safety, this machines compliance with European Union safety directives and are certified with CE Certificate. All standard components which used in machine are the best in their field as worldwide trademarks. These machines are developed for a long and trouble-free servicing life and are produced with well-know, best quality components by our qualified staff. Edda Olympia Series packing machines are intented for easy Cgsdjy D Nzljpfx Af Hsu packing of the products by the PE bubble nylon, PE foam film and PE strecth film materials.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap Cedpjxg D Atjfx Af Hjgu - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: used, Year of construction: 2018, operating hours: 806 h, functionality: fully functional, total width: 2,030 mm, total length: 4,450 mm, total height: 2,090 mm, pressure: 3,000 bar, operating pressure: 3,000 bar, fuel: diesel, overall weight: 2,925 kg, water tank capacity: 150 l, volume flow: 1.08 m³/h, fuel tank capacity: 200 l, type of cooling: air, noise level: 85 dB, power: 144 kW (195.79 HP), year of last overhaul: 2026, pump capacity: 18 l/min, Equipment: rotational speed infinitely variable, type plate available, Complete unit in mobile design with soundproof enclosure + accessories, consisting of: (€7,500) 5x hose DN8-20m-3010bar-2x9/16-LH-S 6x complete connector set 9/16 4000 BAR 1x hose DN8-10m-3010bar-2x9/16-LH 1x hose DN5-5m-3010bar-9/16UNF-LH 1x compressed air line DIN10, 20m 1x high-pressure gun HP3000S-E-24V incl. body support and DSA 1x Speedy 3000 Cgedsx Svnbspfx Af Heu 1x Orbimaster 2500 0.80-9/16-18UNF LH 1x rotary union TD3000-SCS-9/16 1x plug-in foot switch, 2-channel, 24VDC 2x cable drum with cable, 50m 2x bursting disc, operating pressure 3000bar 10x filter cartridge 1µm various nozzles